Hello, I know that you might yell at me for not searching forums but I tried! but I have a somewhat unique problem.
The problem is that my DHD bootloops on any Custom Rom. (I seriouly mean ANY)
I can stock it with RUU file on my 8GB SD Card. but the problem is that I want to use a custom rom for non-froyo + root.
so what basicly happens is that it fails horribly on flashing custom roms, I believe the fault might be due to SD Card (the 16GB SD Card I use for normal + custom rom use) so I will try out the 8GB SD card to flash a custom rom this evening. but the problem that happens each time I try to flash a custom rom of the 16GB SD card is that I get HTC/White Screen Boot Loop. It is a infinite boot loop, I tried installing more than 10 different roms. (different versions, and different roms) I even tried to install a rom that worked earlier (don't ask me why I wanted another rom, I just felt like it)
so anyone have solutions?
I'll try these today: flash off my 8GB, remove sd card after flash before boot (seen topics that might help it)
but so far this problem has happend all the time since I got the DHD.... stupid phone give me some slack already!
Solved
Solved
Well, I could successfully install a new rom (Tried Beat Bliss Sense 3.5)
and removed SDcard before reboot and it worked perfectly thought my settings does fc all the time (so Can't use settings at all) so gonna flash something else.
so I have learned that my 16GB sd card is so faulty that it cannot install a custom rom not even a stock RUU (since PD98.img failed before on the 16GB) but oddly enough I dont have problems with media so I can use it as my media/app card while I use my 8GB card as rom flasher. thanks anyway if anyone had a solution in their mind (even if it was the same one)
well in short my 16GB SD card seems faulty some or other way. in some parts
Related
Sprint HTC Mogul
I have done a lot of researching and haven't found a particular solution to my problem. I am fairly new to ROM flashing, so I may have made an unrecoverable mistake.
When I began to unlock the device, I used the TitanUnlocker which I now see that only should be used with pre-GPS. I thought it was successful and tried to flash the stock ROM then proceeded to the custom ROM. I have also tried to install the radio because of course, it doesn't have the radio like it should have. However, it won't boot and is in the following state:
When booting into WinMo, it sticks at the splash screen and also says No Radio. I have tried installing the radio via SD card, but the bootloader doesn't seem to recognize it and so it makes me believe that the microSD card slot is busted.
On the bootloader, it says:
TITA100
SPL-1.20.Olipro
I have tried flashing the stock ROM but it fails out at 11%.
Update for clarification: I cannot use Hard-SPL-MFG to get Olipro-2.40 since I cannot connect to activesync.
If there is anything you can think of to fix this, or the correct combination of bootloader, ROM, and radio, please let me know as this is my primary phone at the moment. Thank you!
Update: I also figure I'd try a different SD card (smaller) to see if that solves the problem with the updating via card.
Moved to general as not rom development
Figured out the problem. The 2gig card was rejected and it flashed with a 512mb card.
riseoftheinferno said:
Sprint HTC Mogul
I have done a lot of researching and haven't found a particular solution to my problem. I am fairly new to ROM flashing, so I may have made an unrecoverable mistake.
When I began to unlock the device, I used the TitanUnlocker which I now see that only should be used with pre-GPS. I thought it was successful and tried to flash the stock ROM then proceeded to the custom ROM. I have also tried to install the radio because of course, it doesn't have the radio like it should have. However, it won't boot and is in the following state:
When booting into WinMo, it sticks at the splash screen and also says No Radio. I have tried installing the radio via SD card, but the bootloader doesn't seem to recognize it and so it makes me believe that the microSD card slot is busted.
On the bootloader, it says:
TITA100
SPL-1.20.Olipro
I have tried flashing the stock ROM but it fails out at 11%.
Update for clarification: I cannot use Hard-SPL-MFG to get Olipro-2.40 since I cannot connect to activesync.
If there is anything you can think of to fix this, or the correct combination of bootloader, ROM, and radio, please let me know as this is my primary phone at the moment. Thank you!
Update: I also figure I'd try a different SD card (smaller) to see if that solves the problem with the updating via card.
Click to expand...
Click to collapse
you get this fixed? If not you can flash from bootloader. You just need to plug it in. But if I remember correct you need to be synced for bootloader 2.40. So you need to flash a pre gps 2.xx radio and flash a WM 6.0 rom. then you should be able to flash bootloader 2.40
hi guyz after installing some programm dont remember exactly which my wildfire doesnt boot anymore it stops on htc screen.can i get a rom on sd card to use w/o open my phone?
Was it rooted? If Yes, then simply flash a new ROM from within Clockworkmod after entering Recovery Menu. If it was not rooted, flash a RUU by downloading one from Shipped ROM's and running the file after having HTC Sync installed.
But really, getting a bootloop by just installing an app seems unlikely to me. Anyhow, Good Luck.
thnx for fast reply its rooted but my prob is how to get the rom to sd card ?i mean i cant enter my menu so that i can transfer rom from pc to phone.(sorry for poor english)
Borrow or get a cheap card reader? They sell as cheap as peanuts these days. Or, if you have a laptop, most of them have integrated card readers.
You can mount SD from recovery
mount?how to?
ive tried many lovely roms on my dream, but all but one have horrific battery life, the one exception is gingeryoshi 1.1 with the new farmatito kernel, so i figured i could just install it to my preferred rom and id be away, however it seems not so simple as all that
first i tried installing it to the cos-ds image i was running at the time, it simply killed that stone dead, wouldnt boot past the boot anim. so i decided to test it on my current fave rom, beatmod 2.2, i did and it booted and seemed to run fast and reasonably problem free until it came to installing an apk i had on my sd card, where i found that it wouldnt read the card at all, it said no card inserted and on pulling and reinserting it displays damaged SD card and often causes many force closes on other running processes, so what is it that i need to change to get it working, it seems close enough that itll just need some tweaks so if someone could point me in the right direction id be grateful, just a "read this, this and this" and some links is plenty (the info may well be on here already but digging it out can be a nightmare and i havent got that far on my own yet, its a BIG forum)
so what exactly are you trying to figure out? how to fix your sd card or how to get the kernel working? your sd card may have actually just died because believe it or not those things dont last as long as you think.. thore more times you copy things on and off them the quicker they die.. but as far as the kernel problem im not sure exactly how it all works i usually get the recommended kernel for rom... usually on the post with the rom link
no the sd card is fine, its any sd card when used in beatmod with that kernel, so getting the kernel working, what i want is a rom thats a little faster than the somewhat sluggish gingeryoshi but is compatible with the farmatito kernel which solves my short battery woes
ive actually even tried cos-ds and used their recommended farmatito kernel but even then it still leaves me stuck at the g1 boot screen. infact as yet beatmod is the only rom i have got to boot at all with a different kernel than the one that comes with the rom. im not sure if its something that im doing or possibly that the g1 is on its way out, its just refused to use the backup i made before testing the greenromproject rom (which also didnt boot, again stuck at the g1 screen) as the md5 check failed and what with it being picky about which backups it will and which it wont boot anyway im beginning to suspect there may be more to it than a software complaint
and now that ive finished typing i look over at my phone to still see that big g1 glaring at me, none of my current backups now work ah well try a fresh install i guess
HI BOYS...
I have had a problem with reflash to the HD2, installing WP7, the new version with NODO, has made to depart the whole procedure without inserting the SD...
When I have realized of I mistake it, I have reformatted the DEVICE and referred everything... but at the end of the trial when it had to load the WP7 you/he/she has given me: 1234FATAL hits 4
Don't I now succeed in making to correctly depart WP7, WE can help me in this problem to resolve ?
HELP ME!
have you try to flash to stock ROM winmo 6.5?go to tricolor screen and flash back to original ROM,then task29 your SD card and follow the steps to re-flash WP7 ROM. Hope this help.
in practice reloading WP7 I have noticed that he/she doesn't write me nothing on the SD, I will now try to flash the original ROM...
If some good boy has other ideas they are here to try...
<<<RESOLVED>>>!!!!!!!!
Return back to the origins is always the best solution--- now the OS Funziona!!!!!!!!!!!
Tomorrow I retry to install WP7,
THANKS,
I hope both profit to you this post,
Regards and good flash
fatal hit possible cure if happens
first sorry i didn't see this earlier but had same problem if you have an extra sd card like 2gb and reflash rom then use the other card so nand can clean up the mess in part4.nbh don't ask me why but work for me also if it still happens you might what to check sd card and make sure it class 2 or if first partition is degraded
Hey guys,
So my problem, I downloaded Xperia Beta ARC installed it seemed that everything was fine, used the storage alterer, since then my sd card doesnt work in any device! iv not been able to flash another rom or anything to my HD2.
So i tried the HD2 Android NAND Toolkit and task29'd it.
now im stuck on the loading screen just sits there does nothing. i fear iv ruined my HD2 any advice would be great. iv litlary tried everything! im not going to be able to use the sdcard anyone got any ideas of flashing a rom to the unit, i tried to get wp7 onto it but keep getting a error.
Any help much appreciated.
update -
trying downloading win 6.5 exe see if i cant get it back to original state! fingers crossed. could use a program to fix my SD card as i think its just a partition issue.
Ross
r0sc0sco said:
So i tried the HD2 Android NAND Toolkit and task29'd it.
now im stuck on the loading screen just sits there does nothing.
Click to expand...
Click to collapse
yes well it would do, you just removed the rom by task29'ing.
no clue what the storage alterer is, so cant help, but simply entering magldr, then from there cwm should let you flash a rom (once you sort teh card out, of course)
EDIT - oh right you used the toolkit, which also removes magldr(that isn't always the case), so you will need to flash that again too, , magldr - cwm partitioning - new rom.
To be honest, iv tried everything to fix the sd card, but its just a bit gutting its working then next minute its destroyed due to partions! will just purchase a new one and see how it goes!
Got the windows 6.5 onto my phone, im hopeing i can now go to win7! until i sort out my SD card issue.