Related
I have a problem. I can not get Market to work, even with the market enabler and the latest market mod from the NotionInkHacks forum. I had it working first, then did the OTA and it was still working. But then I did a full factory reset to clear out my Adam (something I always do after a few days with new units, so I can remove the traces of experimenting. And now I can't get Market working again! I have done the unbricking update with the recovery image dated the 24. of Jan, and I'm pretty sure that will fix it. The problem is that I can't seem to get rid of the OTA update that's on the unit. I have tried to hard reset it with both the reset in Settings and the one in the flash menu (power on + vol up), and still it's there installing itself. And I can't find it with Sniffer or Root Explorer! Any idea how I can remove this thing, so I can get back the Market access?
I also deleted the recovery.zip on the "internal SD card", and still I get "Your Adam is up to date" when I try to check if I'm back to an earlier image, and I have the same problem with Market. Driving me up the wall here! According to my About Adam the build number is NIP20230111.
I finally solved that. I downloaded the 5. of Feb update, and now I can update to the latest. Still market doesn't work, though. Any help on that would be appreciated! Driving me totally crazy...
Mastiff said:
I finally solved that. I downloaded the 5. of Feb update, and now I can update to the latest. Still market doesn't work, though. Any help on that would be appreciated! Driving me totally crazy...
Click to expand...
Click to collapse
Did you try force closing market and clearing data?
Sorry, should have posted that I finally got it. I went to Edenx and tried 3-4 full resets with that, and suddenly it worked. I have no idea how and why, but it's there now. It' very slow, but it's there. My son's Nook Color pops into market and makes searches in seconds, this takes at least half a minute. But I can deal with that. I've got Titanium Backup now, so I won't have to download anything more from the market if I don't need new apps.
Im experiencing an error on every application I try to install or update. Error reads "Download was unsuccessful, please try again"
I'm hoping the store is down and everyone is having this problem...if its just me any suggestions. Its been doing this for a couple hours so I flashed to 1.26, updated to 1.57 and than updated to 1.83.
I know I'm rooted as I can use Root Explorer.
jank0023 said:
Im experiencing an error on every application I try to install or update. Error reads "Download was unsuccessful, please try again"
I'm hoping the store is down and everyone is having this problem...if its just me any suggestions. Its been doing this for a couple hours so I flashed to 1.26, updated to 1.57 and than updated to 1.83.
I know I'm rooted as I can use Root Explorer.
Click to expand...
Click to collapse
the last time that happened to me, i was out of space internal memory, so nothing would install. i clean up all my caches and remove unneeded apps and stuff worked again. not sure if that is your problem.
NguyenHuu said:
the last time that happened to me, i was out of space internal memory, so nothing would install. i clean up all my caches and remove unneeded apps and stuff worked again. not sure if that is your problem.
Click to expand...
Click to collapse
Thanks for suggestion but this is a fresh install...i dont have anything installed.
I tried this too, but didn't work either..
http://forum.xda-developers.com/showthread.php?p=13271738#post13271738
I had that happen on my dell venue. The fix is trivial.
Plug your phone into your usb cable, and set it to mass storage
then install. It will work fine.
It fixes itself eventually (in my case), the usb is fine for the interim
Techcruncher said:
I had that happen on my dell venue. The fix is trivial.
Plug your phone into your usb cable, and set it to mass storage
then install. It will work fine.
It fixes itself eventually (in my case), the usb is fine for the interim
Click to expand...
Click to collapse
Well thanks for suggestion..didn't work for me either. This is crazy as this is a fresh install...I just flashed and updated...
Just a heads up...I was panicking because this lasted for about 6 hours and than all of the sudden just as I was going to go to sleep, it started working again. I believe it was something on the server side, nothing I did....needless to say I stayed up late to get as many of the apps I needed as I was worried about when my luck might run out...
I flash to 1.5.7 and update to 1.8.3 yesterday, then I open Market, it said like that 'there's a error,please try later'. I just reboot my atrix, and open WIFI, try Market, it's ok now.
PS: the apps downloaded from MarKet is here: /cache/download**.apk
Is there any way to cancel the download of the OTA Gingerbread update?
I'm on 2.3.340.MB10, Baseband BP_C_01.09.07P, rooted, stock ROM. I manually triggered the update check earlier (About phone→System updates). I got the update notice and selected “Later” (I want to wait until it's clear that I can keep or regain root).
Maybe an hour later, I noticed a download icon. The notification says Downloading updates and is currently at 18%. I went into Airplane mode to stall it. I tried rebooting and turning Airplane mode on and off, but the best I can do is stall the download and I can't stay in Airplane mode forever. (WiFi has been off the whole time.)
When I go back to System updates, I get “An update is currently downloaded. You will be notified when the download is complete.”
Can somebody please provide me one of the following:
1. How to cancel the download
2. How to indefinitely not install after allowing the download to complete
3. How to upgrade and keep or regain root
Thanks!
P.S.: Does anyone know why the download started when I picked the Remind me later option?
not sure about the first two questions, but as for the 3rd one, P3droid posted rooted OTA build with instructions in DX section of his forum. I don't think links are allowed, but shouldn't be too hard to find.
Oh and yeah, downloading the update automatically after it's found is default behavior for DX.
Can't cancel, but after download it will ask you if you want to install now or later. Choosing later is your only option, unfortunately you will be reminded every four hours if you want to install or not
Sent from my DROIDX using XDA App
Settings
Battery and Data Manager
Data Delivery
Social Applications
Sync over Wi-Fi Only <- Check this box
Thanks, all!
Thanks, folks who posted.
tech_head's tip indeed froze the download, since I rarely connect to WiFi. (Why updates are “Social Applications,” I don't know.) (Interestingly, I had the hardest time actually getting into this menu. Took about 10 tries.)
metamorphousthe's tip saved me from being paranoid about the download completing.
meshdub's tip I haven't checked into yet, but that's promising.
Thanks again!
Just delete a system app and the update will fail when it tries to install and then you're all set
I renamed the blurupdater.apk to .bak I think that stops updates.
larsdennert said:
I renamed the blurupdater.apk to .bak I think that stops updates.
Click to expand...
Click to collapse
You should be all set
Hello Guys,
At first i just flashed a N900 Pre-Root Deodex file using Odin, but after reboot a window popped out displaying," Unfortunately, Direct pen input has stopped." And it happened all the time as it keeps freezing my note 3 with all these windows & notice over & over again.
I really don't know how did i go wrong. So I tried to do factory reset, wipe cache & dalvik cache using CWM Recovery 6.0.3.8 but to no avail. The problems worsened as now multiple windows starts to freeze the screen with different notice such as now:
1. Unfortunately, Direct pen input has stopped
2. Unfortunately, Samsung keyboard has stopped
3. Unfortunately, Internet has stopped
4. Process system isn't responding
Do you want to close it
I checked into my download mode, it displayed CURRENT BINARY CUSTOM and SYSTEM STATUS CUSTOM ???
Please kindly advise, thanks in advance
[Sharing Info]
Problem is solved by flashing Stock ROM from same Asian Region here (WAN) because my original country's Stock ROM (XSE) isn't available yet.
Denim Guy said:
[Sharing Info]
Problem is solved by flashing Stock ROM from same Asian Region here (WAN) because my original country's Stock ROM (XSE) isn't available yet.
Click to expand...
Click to collapse
Hello, Can you elaborate further what exactly did you do? I got the same problem now on my Note 3
Thanks in advance!
Check logcat for crashes!
I disabled / uninstalled as many system apps that appeared in my drawer as I could. One too many it seems and Messaging would crash each time I got a text.
Re-installed the app from backup and just hid it in my app draw (ADW Launcher EX)
The remedy is simply flash your original firmware using odin, then for rooting process i just flashed using CF-Auto Root File with same method
b0ybitzzz said:
Hello, Can you elaborate further what exactly did you do? I got the same problem now on my Note 3
Thanks in advance!
Click to expand...
Click to collapse
At my point of trouble that time, it was totally chaotic as the phone kept freezing with multiple error windows, and i could neither use the keyboard nor using the phone normally at all. It was quite relieving to know that i could still reboot into download mode that time, otherwise i would be stressful in vain till now.
@Class said:
Check logcat for crashes!
I disabled / uninstalled as many system apps that appeared in my drawer as I could. One too many it seems and Messaging would crash each time I got a text.
Re-installed the app from backup and just hid it in my app draw (ADW Launcher EX)
Click to expand...
Click to collapse
Denim Guy said:
The remedy is simply flash your original firmware using odin, then for rooting process i just flashed using CF-Auto Root File with same method
At my point of trouble that time, it was totally chaotic as the phone kept freezing with multiple error windows, and i could neither use the keyboard nor using the phone normally at all. It was quite relieving to know that i could still reboot into download mode that time, otherwise i would be stressful in vain till now.
Click to expand...
Click to collapse
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
right
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
above is absolutely right and I have fixed the issue .
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
I cant believe I had to read 15 posts about gibberish before you fixed it for me. TY sir.
Thanks
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
Thank you very much I had turned this process off a few days ago but today it caught up with me..
FIXED IT!!!!!
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
This was my solution! Thank you!!! :good:
same problem on note 3 SM-N900A (att)
how do fix this on att note 3 please help, the pop out is really anoying and making me frustrated
odan360 said:
how do fix this on att note 3 please help, the pop out is really anoying and making me frustrated
Click to expand...
Click to collapse
Haing any luck with your issue mines the same BE4 i soft bricked mines and AFTER i unbricked it.....
Same
champgee said:
Haing any luck with your issue mines the same BE4 i soft bricked mines and AFTER i unbricked it.....
Click to expand...
Click to collapse
Not sure what you mean by this. I'm having the same issue now. I tried to root using this tutorial https://www.youtube.com/watch?v=hg82AWA_lmI having no luck and failing on the first part. After that the phone wanted to be fixed via kies firmware; tried that with no success. I then tried these steps http://forum.xda-developers.com/showthread.php?t=2525279 to recover. While in Odin, I was given a success message ONLY with the PIT. Everything else during, before and after fails. This results in me having to re-PIT every time.
So now the phone, even after a factory reset, is still showing the message
Unfortunately, Direct pen input has stopped.
Click to expand...
Click to collapse
Any help would be appreciated
SM-N900A AT&T US
Kies reset: SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1
Odin 3: PIT and PDA: SECURE CHECK FAIL : system
When using this guys method: http://rootzwiki.com/topic/110386-return-to-stock-mj5-works/ When I get to the Heimdall Frontend section I get this message: Initialising protocol...
ERROR: Failed to send data!Releasing device interface...
How?
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
How do I get this process back on the phone?
allnamesaretaken said:
How do I get this process back on the phone?
Click to expand...
Click to collapse
Reflash stock
No data loss, but will loose root
If u rooted via urdlv, flash the file u used to root your device.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Flash -
Killberty said:
Reflash stock
Click to expand...
Click to collapse
No data loss, but will loose root
If u rooted via urdlv, flash the file u used to root your device.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
I've been trying to do this, is there something I'm missing? Please refer to this link or scroll up a bit.
http://forum.xda-developers.com/showpost.php?p=49473243&postcount=13
allnamesaretaken said:
Not sure what you mean by this. I'm having the same issue now. I tried to root using this tutorial https://www.youtube.com/watch?v=hg82AWA_lmI having no luck and failing on the first part. After that the phone wanted to be fixed via kies firmware; tried that with no success. I then tried these steps http://forum.xda-developers.com/showthread.php?t=2525279 to recover. While in Odin, I was given a success message ONLY with the PIT. Everything else during, before and after fails. This results in me having to re-PIT every time.
So now the phone, even after a factory reset, is still showing the message
Any help would be appreciated
SM-N900A AT&T US
Kies reset: SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1
Odin 3: PIT and PDA: SECURE CHECK FAIL : system
When using this guys method: http://rootzwiki.com/topic/110386-return-to-stock-mj5-works/ When I get to the Heimdall Frontend section I get this message: Initialising protocol...
ERROR: Failed to send data!Releasing device interface...
Click to expand...
Click to collapse
allnamesaretaken said:
I've been trying to do this, is there something I'm missing? Please refer to this link or scroll up a bit.
http://forum.xda-developers.com/showpost.php?p=49473243&postcount=13
Click to expand...
Click to collapse
Took it to AT&T they replaced the phone.:good:
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
Your solution is the usual error/solution for most. I just found out that if you are using xposed - xprivacy module to limit permissions that when I recently installed samsung's "Watchon" TV and its helper app Media that I recieved a popup from xposed XPrivacy to set my policy on something of a long winded name like "1000 ANT HAL Service, Android System, Application installer, Assistant menu, BluetoothTest, Camera Test, Color adjustment, DgitalPenSdK, Direct pen input, EasyOneHand, Enterprise Sim Pin Service...." and it goes on and on. Apparently it's one of those deep shared system identifiers that the new apps added themselves to so when I took my usually cautious approach to limit some of the permissions I didn't have any errors immediately but upon reboot it all began. I naturally did a search and found your solution is the most common but seeing as it wasn't a solution for myself I had to dig deeper. Anyhow, if anybody else is in my position with that particular error and it relates to xprivacy just know that you can begin releasing permissions rather than unrestricted for that mass identifier, or just use "clear" so that it is totally unchecked and the FC of Direct Pen Input will go away immediately.
Not working
hockeyfan said:
I ran into this issue as well, when I started carelessly turning off all the services on my GN3 to free up memory. I narrowed down the issue to the process/service called "MyScript ResourceManager." If this is disabled/removed, you will get the Direct Pen input error. Make sure you don't disable/remove this process!!
Click to expand...
Click to collapse
I tried this solution but with no luck. I have just reimaged my phone and it starts popping up as I try to set up the phone for the first time. I went to the app manager and the MyScript ResourceManager was on and never turned off. Please help. I have the sprint version SM-N900P
killjoy666 said:
I tried this solution but with no luck. I have just reimaged my phone and it starts popping up as I try to set up the phone for the first time. I went to the app manager and the MyScript ResourceManager was on and never turned off. Please help. I have the sprint version SM-N900P
Click to expand...
Click to collapse
reflash stock, or do a factory reset. that worked for me.
Hi guys, i Just bought the Nexus 6p, so Nexus Noob here, I downloaded and installed all the security updates month by month and all went well until I got the 7.1.1 update
The phone download 1.2 GB then when I tapped restart and install, the countdown for install started and when it finished it just said your phone is up to date, then when I tapped check it again said there's a 1.2 GB update for Nougat and started to download it from scratch
I did this three times and even wiped cache partition in between but it was just the same
I appreciate any help
Thank you
Update: I did a factory reset and now it just says my phone is up to date, It won't even show the 7.1.1 update to install anymore.
Download the 7.1.1 OTA image from Google, then sideload it using adb from recovery.
https://developers.google.com/android/ota
riginal said:
Update: I did a factory reset and now it just says my phone is up to date, It won't even show the 7.1.1 update to install anymore.
Click to expand...
Click to collapse
That's great to hear. I wonder if it pulled the downloaded OTA during the reset somehow and flashed it... Either way, glad it worked!
I got a question? I am rooted, running dirty unicorns and have received the 7.1.1 update notification. Obviously I don't want to update as it'll probably brick or take root from away. How does one get rid of the ota notification?
mrjoeyloke said:
I got a question? I am rooted, running dirty unicorns and have received the 7.1.1 update notification. Obviously I don't want to update as it'll probably brick or take root from away. How does one get rid of the ota notification?
Click to expand...
Click to collapse
Unfortunately you can't
boxguy1 said:
Unfortunately you can't
Click to expand...
Click to collapse
Can the update be downloaded and then deleted? If so where would it be stored after the download?
mrjoeyloke said:
Can the update be downloaded and then deleted? If so where would it be stored after the download?
Click to expand...
Click to collapse
You can disable notifications by holding the it
Update: After the last factory reset and checking for the update a few times it finally showed the update again, downloaded it and installed it just fine
Finally on 7.1.1 yay, only problem is Data doesn't work anymore
did 6.01 ota popped out on your end? just got a new nexus 6p and from oct 2015 version it showed ota directly to 7.1.1... no 6.01?
riginal said:
Update: After the last factory reset and checking for the update a few times it finally showed the update again, downloaded it and installed it just fine
Finally on 7.1.1 yay, only problem is Data doesn't work anymore
Click to expand...
Click to collapse
What carrier do you have I will find the APN settings for you so data works
boxguy1 said:
What carrier do you have I will find the APN settings for you so data works
Click to expand...
Click to collapse
Thanks, I'm not from U.S though
riginal said:
Thanks, I'm not from U.S though
Click to expand...
Click to collapse
I know but each carrier has apn information you should try googling it
boxguy1 said:
I know but each carrier has apn information you should try googling it
Click to expand...
Click to collapse
The info was automatically set and I checked and it was correct but data wouldn't work, I reset network settings and now apps like telegram work with internet but I can't browser and the browser says no connection, lol
riginal said:
The info was automatically set and I checked and it was correct but data wouldn't work, I reset network settings and now apps like telegram work with internet but I can't browser and the browser says no connection, lol
Click to expand...
Click to collapse
Did you try clearing the system cache? That's generally a good idea after a major OTA.
---------- Post added at 01:59 AM ---------- Previous post was at 01:57 AM ----------
You can also try clearing the app data for your browser and see if that helps but I would clear system cache first.
riginal said:
The info was automatically set and I checked and it was correct but data wouldn't work, I reset network settings and now apps like telegram work with internet but I can't browser and the browser says no connection, lol
Click to expand...
Click to collapse
Oh dam it doesn't do it automatically for me lucky
Update: I finally solved the problem, the issue was that the automatic settings had one mistake, some random proxy was set when it should haven been empty and I somehow manage to missed it when checking, I just removed the proxy and the browsers and Gmail app started to work, Thank you guys