Database Users

Can't access Market

Hey all,
I've been trying to search for this issue but couldn't find and answer so I decided to post it here.
About a month ago I decided to install the CyanogenMod4.0.4 ROM on my G1. I remember I was able to access the Market because I downloaded so apps onto my phone, but over the last 2 weeks, I can't get it running anymore. Everytime I go to open it, I get the 'force close' message. I've tried turning my phone off and on to see if that cured it but I still get the same message. I also noticed one of my apps doesn't work at all anymore (Shazam) which makes me wonder if I might of accidentally changed a setting somewhere which is not letting it work. I had downloaded a few apps from the market when it did work and some apps work properly and others don't. I hope this doesn't have anything to do with the ROM because I really like it and want to keep it installed...
any answers would be great, thanks

have you tried running fix_permissions? that usually clears up a lot of problems.

no, I haven't tried that yet. I don't know how to run that. Where do I go to do that?

well, I figured out how to do fix_permissions
I ran it, rebooted my phone, but I still have the same issue. My Market doesn't open.
i guess I'm going to have to just simply re-install the ROM?
I know there's a new one out so I might just do that, but I'm hoping that I don't continue to have this problem when I update

You could always re install 4.0.4 again, that should repair the market and it should just upgrade so all your settings will still be there.... have you got the CM recovery bootloader installed? if not, do that firts, its a life saver.
TrOjAn

No, I don't have the CM bootloader, so I'll have to get it and I'll try that. Thanks!

[q] driver problems?

I have updated everytime there was an update. I updated to the new rom 6.1.1 on 12/17/10. About a week later I tried to use the USB tether on my laptop and then on my desk top. I could not use it as the computer said the driver is not signed. Or code 10. I'm not a great PC user. How do I fix this or is there a fix for it? I use to use it on the previous rom 6.1.0 with out ever having a problem. I asked a question about this in a different thread and was basically ignored. Both of my computers use XP.

So nobody else has this problem? Or nobody can or wants to which is it cause I have done lots of searching and reading without finding any answer or clue. Thanks

So anyone else that uses USB tethering, please reply and let me know if yours works. If so is there a trick to it?

I've never had any issues. Try doing a full wipe (clear data/cache) and reinstalling the rom.
Sent from my Liberty using XDA App

No issues on Liberated 2.2 with tethering. But still you can use 3rd party apps, like PdaNET.

mattbollenbach said:
I've never had any issues. Try doing a full wipe (clear data/cache) and reinstalling the rom.
Click to expand...
Click to collapse
I've done this three times with no success. Both of my computers still giving the error. (Code 10) driver not digitally signed. I noticed one thing thou that after wiping everything and reinstalling one of the times it would not reboot all the way. Stayed on the Cyanogen mod symbol with the stuff going around it. Every time it tried to load it just bounced back to this screen.

barisahmet said:
No issues on Liberated 2.2 with tethering. But still you can use 3rd party apps, like PdaNET.
Click to expand...
Click to collapse
Just about to try PdaNet. In my phone info: Says Android 2.2.1, Kernel Version Is: [email protected] #69 Mod version CyanogenMod-6.1.1-Liberty.

PDA net works. I really wished though that I could use what was already installed on the phone. It worked all the time flawless in the previous ROM.

Just to make sure, don't have your phone plugged in when you are using recovery mode; for some reason if your phone is off and you plug it in via usb it enters an unreliable version of clockwork recovery. Instead choose boot into recovery from the power down options within the rom.
Sent from my Liberty using XDA App

Did you try uninstalling the driver from your computer?
Also, start > control panel > system > hardware > driver signing
what setting do you have currently for driver signing?

mattbollenbach said:
Just to make sure, don't have your phone plugged in when you are using recovery mode; for some reason if your phone is off and you plug it in via usb it enters an unreliable version of clockwork recovery. Instead choose boot into recovery from the power down options within the rom.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
No I dont have my phone plugged in when using recovery mode. Thats the way I always do it.
zervic said:
Did you try uninstalling the driver from your computer?
Also, start > control panel > system > hardware > driver signing
what setting do you have currently for driver signing?
Click to expand...
Click to collapse
My driver signing is set to ignore- Install the software anyway and dont ask for my approval. I dont really know how the settings in both computer would have changed. Unless when I installed a printer it automatically changed them. Cause besides the new ROM it is the only thing Ive changed. Also I have tried uninstalling and reinstalling and deleting the tether and downloading and reinstalling with the same every time.

On top of that now my phone is rebooting it self. Today while checking cl. it just flashed to the begining cyanogen screen. What's going on? What should I do Now?

I tried to reinstall the ROM again, cleared everything. I noticed while Wiping Dalvik Cache it just jumped back to the previous screen. It didnt show that it was wiping or anything. I reinstalled and apparently everything was not wiped because when my phone Rebooted. It took me through the setup screens like a new phone but when the screen poped up. My wallpaper was still there. Can someone help me? Im really getting sick of trying to get this to work now It seems as I have more problems now.

pcidiot said:
I tried to reinstall the ROM again, cleared everything. I noticed while Wiping Dalvik Cache it just jumped back to the previous screen. It didnt show that it was wiping or anything. I reinstalled and apparently everything was not wiped because when my phone Rebooted. It took me through the setup screens like a new phone but when the screen poped up. My wallpaper was still there. Can someone help me? Im really getting sick of trying to get this to work now It seems as I have more problems now.
Click to expand...
Click to collapse
Does the computer you're trying to use the tether on have wireless capabilities?

One of them does and the other does not. Both run xp though. Wiped again, wiping everything twice before flashing the ROM. I have not had any self reboot so far, and everything seems to be working ok. I have not got around to trying the usb tether yet though. Maybe a little later today.

Market not working - how do I remove downloaded OTA update?

I have a problem. I can not get Market to work, even with the market enabler and the latest market mod from the NotionInkHacks forum. I had it working first, then did the OTA and it was still working. But then I did a full factory reset to clear out my Adam (something I always do after a few days with new units, so I can remove the traces of experimenting. And now I can't get Market working again! I have done the unbricking update with the recovery image dated the 24. of Jan, and I'm pretty sure that will fix it. The problem is that I can't seem to get rid of the OTA update that's on the unit. I have tried to hard reset it with both the reset in Settings and the one in the flash menu (power on + vol up), and still it's there installing itself. And I can't find it with Sniffer or Root Explorer! Any idea how I can remove this thing, so I can get back the Market access?
I also deleted the recovery.zip on the "internal SD card", and still I get "Your Adam is up to date" when I try to check if I'm back to an earlier image, and I have the same problem with Market. Driving me up the wall here! According to my About Adam the build number is NIP20230111.

I finally solved that. I downloaded the 5. of Feb update, and now I can update to the latest. Still market doesn't work, though. Any help on that would be appreciated! Driving me totally crazy...

Mastiff said:
I finally solved that. I downloaded the 5. of Feb update, and now I can update to the latest. Still market doesn't work, though. Any help on that would be appreciated! Driving me totally crazy...
Click to expand...
Click to collapse
Did you try force closing market and clearing data?

Sorry, should have posted that I finally got it. I went to Edenx and tried 3-4 full resets with that, and suddenly it worked. I have no idea how and why, but it's there now. It' very slow, but it's there. My son's Nook Color pops into market and makes searches in seconds, this takes at least half a minute. But I can deal with that. I've got Titanium Backup now, so I won't have to download anything more from the market if I don't need new apps.

[Q] Market disappears on rooted 1.2

Hey all,
Everytime I root my 1.2 device with manual nooter 4.5.6 (haven't tried .18), I get one download out of the Android Market. After that the Market.apk disappears from the system/app directory and I can no longer download apps. The end result of this is that I'm pretty much hosed. I've tried putting SU File Manager on to sideload apps, but it can't installed BusyBox because of the market problem, so no luck with that. I've reproduced this issue at least half a dozen times, using CWR to delete all the user data, re-registering the stock install, and then rooting again.
At this point I'm staying stock until I feel confident I can download more than one app from the market on a rooted device.
So, has anyone else experience anything like this, and if so, is there a solution?

I have this same problem. No solution yet.

It may be related to a download directory bug which has been fixed. I updated to MN4.5.18 over 4.5.6. Everything worked well untill a recent update to 4.5.25. The market crashed again. This issue seems not solved yet. So I had to flash back 4.5.18.

Same here - .18 works very well once you figure out you have to uninstall the apps that want to update and then reinstall clean to remove the chance of bootloops. I was considering doing a complete wipe again and flashing .25, but I've decided to stick it out with .18 until they get squared away.
Overall, MN4.5.18 kicks ass for all intents and purposes, and I'd suggest moving up to that.

mjbelknap said:
.18 works very well once you figure out you have to uninstall the apps that want to update and then reinstall clean to remove the chance of bootloops.
Click to expand...
Click to collapse
Can you elaborate on this?
Can ANYONE elaborate on this

Issues after latest update G935FXXU1APF2/G935FODD1APF2/G935FXXU1APEQ

First off, sorry about the uninspiring title
Now that that's out of the way, here's the problem.
Have got the latest update for the Edge and it was around 70+ mb (version details in the title).
After the update the "Storage" option within "Smart Manager" throws up the error: "Unfortunately, SmartManager Clean SDK has stopped." (Screenshot attached)
This happens every time it is run, even after a fresh reboot. But doesn't happen in case the cache of the app is cleared. But this only helps for one run. By the time the app is run again, same error.
Anyone else facing the same issue? If yes, found any workarounds? Also, how do I get this info to Samsung? Can't find an official forum that I can post this, so that they get it fixed.
Help appreciated in advance :fingers-crossed::highfive:

Ever tried resetting the device? Or wiping cache in recovery?

Working fine over here
Sent from my SM-G935F using Tapatalk

anirmj said:
First off, sorry about the uninspiring title
Now that that's out of the way, here's the problem.
Have got the latest update for the Edge and it was around 70+ mb (version details in the title).
After the update the "Storage" option within "Smart Manager" throws up the error: "Unfortunately, SmartManager Clean SDK has stopped."
Click to expand...
Click to collapse
Just had a look: NO problems here...
Which font are you using on your S7Edge?
Is your device "rooted"? Have you "disabled" any apps?

@JohnLouise: Mine's not rooted... yet.. Also don't want to reset, which would mean setting up the device from scratch, time consuming, would like to avoid.
I clean the Storage time and again, a habit that I believe is good in the long run. I had done it an hour before the update and it worked without issues. No new apps were installed after that, which would point the fingers squarely at the update being the culprit.
@henklbr: No system apps disabled, although i have disabled all microsoft provided apps (but that shouldn't cause the issue). Also, its the Rosemary font. You can find it in Settings>Display>Font
FYI, I use the small version of the font.
Well, guess I have no other choice but to wait for the next update, or someone who has a solution to this, and hope its fixed, or my phone to go bonkers out of the blue, in which case i'll have to reset.

anirmj said:
First off, sorry about the uninspiring title
Now that that's out of the way, here's the problem.
Have got the latest update for the Edge and it was around 70+ mb (version details in the title).
After the update the "Storage" option within "Smart Manager" throws up the error: "Unfortunately, SmartManager Clean SDK has stopped." (Screenshot attached)
This happens every time it is run, even after a fresh reboot. But doesn't happen in case the cache of the app is cleared. But this only helps for one run. By the time the app is run again, same error.
Anyone else facing the same issue? If yes, found any workarounds? Also, how do I get this info to Samsung? Can't find an official forum that I can post this, so that they get it fixed.
Help appreciated in advance :fingers-crossed::highfive:
Click to expand...
Click to collapse
Wiping cache in samsung recovery mode? U don't need to be rooted on that. Maybe the update causes issues and wiping cache and dalvik will resolve the problem.

I'm having the same problem since the last update, and I'm not rooted either.

Same here. Even after factory reset and clear cache. Now disabled the service, no error notification anymore. but still. It's not usable anymore

any news? im having the same problem here
Sent from my SM-G935F using XDA-Developers mobile app

No problems here.
Rooted and on latest
(Allthough the latest Update, i installed from Fresh (Complete wipe and reinstalled everything)
I thought to myself a 5th dirty update is pushing it abit.
All working fine here:

Same here, although I have non edge version on stock ROM. Nothing helped, so far. Hope next update will fix it.

anirmj said:
First off, sorry about the uninspiring title
Now that that's out of the way, here's the problem.
Have got the latest update for the Edge and it was around 70+ mb (version details in the title).
After the update the "Storage" option within "Smart Manager" throws up the error: "Unfortunately, SmartManager Clean SDK has stopped." (Screenshot attached)
This happens every time it is run, even after a fresh reboot. But doesn't happen in case the cache of the app is cleared. But this only helps for one run. By the time the app is run again, same error.
Anyone else facing the same issue? If yes, found any workarounds? Also, how do I get this info to Samsung? Can't find an official forum that I can post this, so that they get it fixed.
Help appreciated in advance :fingers-crossed::highfive:
Click to expand...
Click to collapse
Same problem here. Haven't resettled or anything

Same Problem here after June update (German T-Mobile branding).
Tried several times wiping Cashe of everything that has something to do with Clean Master SDK, or Smart Manager.
Did not help.
Today, i tried Factory Reset.
Did not help.
Imediately after that... i downloaded the latest Firmware with SamFirm.
Flashed it via ODIN.
Did not help.....
What the actual ****.
This is annoying as hell tbh. Especially, since over time, a lot "trash" sums up >_>
My only Workaround now is, downloading the Cleanmaster App, and delete "trash" with that, and deinstall the app again because it sucks balls and is annoying.

Kidsnd274 said:
Same problem here. Haven't resettled or anything
Click to expand...
Click to collapse
Darkseth said:
Same Problem here after June update (German T-Mobile branding).
Tried several times wiping Cashe of everything that has something to do with Clean Master SDK, or Smart Manager.
Did not help.
Today, i tried Factory Reset.
Did not help.
Imediately after that... i downloaded the latest Firmware with SamFirm.
Flashed it via ODIN.
Did not help.....
What the actual ****.
This is annoying as hell tbh. Especially, since over time, a lot "trash" sums up >_>
My only Workaround now is, downloading the Cleanmaster App, and delete "trash" with that, and deinstall the app again because it sucks balls and is annoying.
Click to expand...
Click to collapse
LOL, I removed SD card and problem has gone until restart. weird but works

Yes, this is a problem with SD card. I had same problem. Factory reset didn't help.
I tried clean my SD card from old and some corrupted files and now it works just fine.

kornelius1982 said:
LOL, I removed SD card and problem has gone until restart. weird but works
Click to expand...
Click to collapse
Late reply but:
i'm on November Patch level right now, and... Clean Master out of the Samsung Smart Manager.... works. everytime.
i never removed my sd card or anything. it just suddenly works ^^
don't ask me why. maybe a firmware issue, and now it's gone.
But i'll reflash with Odin 100% fresh as soon nougat is out!