Database Users

PLEASE HELP - Phone soft bricked after ICS LPY

Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
**Edit: I don't think I did use repartition...I usually never do....this all started after me trying to clean install via CWM from official rooted LPY it got stuck on formatting then rebooted and was on logo forever so I proceeded to use Odin flashing LPY failed, tried all methods posted here besides flashing kernel Abyuss note 4.2 from in PDA as someone here suggested but since I can't find one that works with Odin I just reflash LC1 rooted stock multiple times but no luck it fails and NAND Write Start which is almost at the end of flashing.
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:13)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Can't open the specified file. (Line: 1876)
All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!

jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
Did you backup your previous from ..if you did just go into recovery and restore it
Sent from my GT-N7000 using xda premium

You are making one huge mistake : you have the box "re-partition" selected. Uncheck that option and you should be good to go.
P_

jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
Try to flash gingerbread rom from http://forum.xda-developers.com/showthread.php?t=1535025 i would try this one "N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)" because it a full wipe.

Here is how to solve.
1.flash stck GB rom
2.wipe data/cache from stock recovery.
3.now flash stock ics.
4.then flash another rom/ root kernel
Sent from my GT-N7000 using xda premium

awesome-member said:
Here is how to solve.
1.flash stck GB rom
2.wipe data/cache from stock recovery.
3.now flash stock ics.
4.then flash another rom/ root kernel
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
That' the safest way.
Sent from my Galaxy Note

Thanks guys, I tried reflashing stock GB lc1 and it stoped on odin pc sayig failed and I did not repartition this time. Tried reflashing stock ICS LPY with no luck...it fails.
If anyone has another option please let me know...I cannot access recovery only download mode when I try to access recovery it gives me " firmware upgrade failed encountered an issue. Please select recovery mode in kies & try gain" .....

jwais said:
Thanks guys, I tried reflashing stock GB lc1 and it stoped on odin pc sayig failed and I did not repartition this time. Tried reflashing stock ICS LPY with no luck...it fails.
If anyone has another option please let me know...I cannot access recovery only download mode.....
Click to expand...
Click to collapse
Try to find the pit file and use it with repartition checked.
Sent from my GT-N7000 using XDA

just to be sure,
did u kill all kies processes?

aww
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
idk how to i wish i could man

Kill KiesHelper.exe and KiesPDLR.exe and try to flash again

Yup killed all kies processes. Reflashing stock LC1 one last time with odin pc as suggested....pray for me

I had this similar issue. I had to completely un install Kies and then Odin worked without issue
Sent from my GT-N7000 using xda premium

i slashed my knees open, knelt with salt and lemon on the ground. i can't do this for long.... is your note ok (i hope i do not have to do some other kind of rituals for the flash procedure to work for you).

Ok guys after trying to reflash second time stock GB LC1 with odin pc this is what I get:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
It goes almost all the way but then somehow stops at the nand write part. Anyone has any clue?

Did you completely uninstall kies? It's worth a shot...
Sent from my GT-N7000 using xda premium

Uninstalling Kies right now...will try again flashing. Thanks!

take out your battery, restart the pc... and try another cable if possible.
make sure all firewalls and/or antivirus softwares are disabled. if it helps, run odin as administrator.
while you do that, i shall make a bonfire and prepare to dance around naked around the flame and chant the songs my great ancestors has been singing since time immemorial.

Ok, I think I found a pattern for the failed attempts during flashing...it always stalls and fails during the NAND Write Start.....anyone has any clue as to why?

Maybe it sounds stupid but what version of Odin do yo use?

[Q] Odin gets stuck while flashing

I tried to flash my Galaxy Y with Odin but it always gets stuck at 'boot.img', after which I power off the phone. The phone is working fine but even after repeating the process the same thing happens. What should I do?

entermetallica said:
I tried to flash my Galaxy Y with Odin but it always gets stuck at 'boot.img', after which I power off the phone. The phone is working fine but even after repeating the process the same thing happens. What should I do?
Click to expand...
Click to collapse
Dude this problem related with flashing kernal which kernal u hav inastalled.
Sent from my GT-S5360 using xda app-developers app

[email protected] said:
Dude this problem related with flashing kernal which kernal u hav inastalled.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I haven't installed any kernel.

entermetallica said:
I tried to flash my Galaxy Y with Odin but it always gets stuck at 'boot.img', after which I power off the phone. The phone is working fine but even after repeating the process the same thing happens. What should I do?
Click to expand...
Click to collapse
just simply disconnect your phone, put off your battery, put in your battery again, enter download mode, and try to flash again

May be Kies interfering
this may be due to kies interfering with the COM connection... you check by pressing Ctrl+Alt+Del and end each Kies process through task manager and try flashing again...

Catalyste said:
this may be due to kies interfering with the COM connection... you check by pressing Ctrl+Alt+Del and end each Kies process through task manager and try flashing again...
Click to expand...
Click to collapse
Also all adb connections must also be stopped
Sent from my GT-S5360 using xda premium

Similar issue here guys.. My phone was stuck at the boot image after rebooting from a custom ROM (JellyBlast 3.0), I couldn't get into recovery mode as well. In download mode Odin (1.84 and 1.85) detects the phone and while trying to flash with stock DDLF2 I get the below:
<ID:0/048> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360DDLF2_S5360ODDLF1_S5360DDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/048> Odin v.3 engine (ID:48)..
<ID:0/048> File analysis..
<ID:0/048> SetupConnection..
<ID:0/048> Initialzation..
<ID:0/048> Get PIT for mapping..
<ID:0/048> Firmware update start..
<ID:0/048> sbl.bin
<ID:0/048> BcmCP.img
<ID:0/048>
<ID:0/048> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what might be wrong - all drivers are installed and Kies is not running.

xdroid_noob said:
Similar issue here guys.. My phone was stuck at the boot image after rebooting from a custom ROM (JellyBlast 3.0), I couldn't get into recovery mode as well. In download mode Odin (1.84 and 1.85) detects the phone and while trying to flash with stock DDLF2 I get the below:
<ID:0/048> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360DDLF2_S5360ODDLF1_S5360DDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/048> Odin v.3 engine (ID:48)..
<ID:0/048> File analysis..
<ID:0/048> SetupConnection..
<ID:0/048> Initialzation..
<ID:0/048> Get PIT for mapping..
<ID:0/048> Firmware update start..
<ID:0/048> sbl.bin
<ID:0/048> BcmCP.img
<ID:0/048>
<ID:0/048> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what might be wrong - all drivers are installed and Kies is not running.
Click to expand...
Click to collapse
Issue fixed, tried another set of FW from doky77's page - the complete set with PDA, Modem and CSC files. The whole process took less than a minute. And bingo, I have unbricked my phone the first time.

Download firmware packages .again and try sometimes it will work....dont worry.......if it stucks on boot.img.......ex:in samsung logo ...remove the battery ....and start the phone in recovery mode using 3button combo.......in recovery mode use wipe data/factory reset after its completed and then wipe cache....after rebbooot system...it will surely work....i have xperienced this bug....if i helped pls tap helped
Sent from my GT-S6102 using xda app-developers app

xdroid_noob said:
Issue fixed, tried another set of FW from doky77's page - the complete set with PDA, Modem and CSC files. The whole process took less than a minute. And bingo, I have unbricked my phone the first time.
Click to expand...
Click to collapse
Hmm so I need 3 blanks filled in in order to flash my SGY?
I only have one file once extracted. Firmware for Sammobile.com

Use doky's thread for downloading firmwares not sammobile....Galaxy Y might not install the whole partition properly from a single tar file from sam mobile....
The doky's Firmwares have a higher chance of proper installation..
Sent from my GT-S5360 using xda app-developers app

I had softbrick with my galaxy Y..
what i do is to get offical firmware which got seperate file for modem,pda,csc..and also need pit file..
i flash it through ODIN and bring my phone alive back..

xdroid_noob said:
Similar issue here guys.. My phone was stuck at the boot image after rebooting from a custom ROM (JellyBlast 3.0), I couldn't get into recovery mode as well. In download mode Odin (1.84 and 1.85) detects the phone and while trying to flash with stock DDLF2 I get the below:
<ID:0/048> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360DDLF2_S5360ODDLF1_S5360DDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/048> Odin v.3 engine (ID:48)..
<ID:0/048> File analysis..
<ID:0/048> SetupConnection..
<ID:0/048> Initialzation..
<ID:0/048> Get PIT for mapping..
<ID:0/048> Firmware update start..
<ID:0/048> sbl.bin
<ID:0/048> BcmCP.img
<ID:0/048>
<ID:0/048> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what might be wrong - all drivers are installed and Kies is not running.
Click to expand...
Click to collapse
this had happened me before.
later i came to know about sgy that our sgy can't flash using a single .tar file in modem.
So you should flash it using three files in PDA, MODEM& CSC.
You will get all these files from 'doky73's thread.
Sent from my GT-S5360 using xda app-developers app

Solution: Add PIT file
abyisforyou said:
this had happened me before.
later i came to know about sgy that our sgy can't flash using a single .tar file in modem.
So you should flash it using three files in PDA, MODEM& CSC.
You will get all these files from 'doky73's thread.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
For any of those who are reading this in the future with the same problem, add the PIT file for your device too and it should work. It worked fort me.

Catalyste said:
this may be due to kies interfering with the COM connection... you check by pressing Ctrl+Alt+Del and end each Kies process through task manager and try flashing again...
Click to expand...
Click to collapse
this worked. many thanks

galaxy y pro 5510 wrong rom ınstall. not have recovery and download mode helpıng me??

galaxy y pro 5510 wrong rom ınstall. not have recovery and download mode helpıng me??
Galaxy Y Pro B5510 rom installed incorrectly. now taking the opening screen of the phone does not turn on and the reset samsung gts 5360 Can you help staying article .. Odin sees staying over there
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXLH4_B5510YOGLH1_B5510XXLH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Download another odin.exe file and try with that.
And yeah there is a separate section of Q & A.Please make threads these type of threads there.

ı try but where ıs odın.exe pls lınl

Wrong section dude

andynroid said:
Wrong section dude
Click to expand...
Click to collapse
where ıs area???,

gokboru09 said:
where ıs area???,
Click to expand...
Click to collapse
the zone is not this for your phone.
He looks in this forum that you were finding-
You must not publish in the first place that you should see without ller a little more and with any more attention.

gokboru09 said:
where ıs area???,
Click to expand...
Click to collapse
to the q&a section..and search if theres a thread for galaxy y pro here.. ) report your thread before anybody will come and talk about nonsense here.. :laugh:

Triangle away

So triangle away doesn't work as of now for mf9 I'm wondering has anyone tried and had any luck going back to mdl then using triangle away to reset the flash counter?
Sent from my SPH-L720 using xda app-developers app

Is the flash counter present somewhere in the file system? I know if I Odin back to MDL and let the phone boot all the way and go through the finalizing android update after setup screens, and then go back to recovery all will say official agaim
Sent from my SPH-L720 using xda premium

It can't read it or change it. Something is interfering.

Triangle away doesn't work on MF9. You have to use it while on MDC or MDL. Yes I have used it and it works.
Sent from my Sprint Galaxy S4 using Tapatalk
Sent from my Sprint Galaxy S4 using Tapatalk 2

Great just what I thought my rule of thumb ask before you flash thanks everyone

HELP!!! PLEASE firmware upgrade encountered an issue.
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!

texassoljaz said:
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
You need to download the stock file from xda, reports from others have said the file linked by qbking is bad.
Sent from my icrap 2 using Tapatalk HD

[Q] [request] Stock DDLA1

Hey can anyone give me flashable file of stock ddla1 galaxy Y or just tell me that can i flash any other deodexed baseband zip in my DDLA1 baseband???
SENT FROM MY GADGET OF MASS DESTRUCTION

Flashing a zip in cwm will not change your baseband - it's like flashing a custom rom zip - It maybe based on that baseband but your phone's baseband doesnt change
Therefore you can flash any rom via cwm on any baseband & it should work - the only possible issue could be loss of imei but a change of kernel normally solves that
To actually change basebands you need to flash a different stock rom firmware via odin
you can find theses on dokys thread in dev section
You can also find latest firmware on sammobile.com but you will need to use the splitter tool also on dokys thread to split the firmware into its separate parts to be able to flash it with odin

Unable to Download stock indian firmware from hotfile
My phone is bricked, and I need to install urgently a Stock Indian rom for my galaxy y.
All links for the firmwares point to Hotfile, which is not accesable currently.
Could some one please point to a download link other than hotfile, so that I can download the firmwares.
Any of the below roms would be helpful.
S5360_DDLA3_ODDLA2_DDLA2
S5360_DDLC2_ODDLA2_DDLC2
S5360_DDLE1_ODDLD1_DDLE1
S5360_DDLF2_ODDLF1_DDLF1
S5360_DDLK2_ODDLK1_DDLK1

nanoharsha said:
My phone is bricked, and I need to install urgently a Stock Indian rom for my galaxy y.
All links for the firmwares point to Hotfile, which is not accesable currently.
Could some one please point to a download link other than hotfile, so that I can download the firmwares.
Any of the below roms would be helpful.
S5360_DDLA3_ODDLA2_DDLA2
S5360_DDLC2_ODDLA2_DDLC2
S5360_DDLE1_ODDLD1_DDLE1
S5360_DDLF2_ODDLF1_DDLF1
S5360_DDLK2_ODDLK1_DDLK1
Click to expand...
Click to collapse
unfortunalty I havent got any of them but you can try a european firmwire just to get your phone booting - i dont know if you will get network but if you urgently need to try something I uploaded this on dev host
http://d-h.st/FhE

search google it.

NexuS** said:
search google it.
Click to expand...
Click to collapse
please note that all firmwire used to be on hotfile - this host site has been shut down so saying google it is not helpful as all sites would point to hotfile
thats why I uploaded the other firmwire on dev host but i dont have any others

Unable to Download stock indian firmware from hotfile
marcussmith2626 said:
please note that all firmwire used to be on hotfile - this host site has been shut down so saying google it is not helpful as all sites would point to hotfile
thats why I uploaded the other firmwire on dev host but i dont have any others
Click to expand...
Click to collapse
I tried flashing via odin using the file given. It was failing.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
AT one point I was ablee to boot into a custom Hyperion Rom after flashing it.
There were WIFI issues, so I tried reflashing kernel etc, and again, I got the below issues.
-- unable to mount /data, /sdcard, /system /cache.
I read through some posts and found out that flashing stock rom is the only way. But here I am unable to flash stock rom also. Btw I am from India, just in case any one wants to help with firmware.
PLease suggest.

nanoharsha said:
I tried flashing via odin using the file given. It was failing.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
AT one point I was ablee to boot into a custom Hyperion Rom after flashing it.
There were WIFI issues, so I tried reflashing kernel etc, and again, I got the below issues.
-- unable to mount /data, /sdcard, /system /cache.
I read through some posts and found out that flashing stock rom is the only way. But here I am unable to flash stock rom also. Btw I am from India, just in case any one wants to help with firmware.
PLease suggest.
Click to expand...
Click to collapse
are you using a pit file? its not required
did you say that firmware worked before but its not now or didnt work at all?
try using a different version of odin
try odin 1.85
what kernel did you try and flash
did you format system data and cache in cwm and then try to mount?

Dont spam
SENT FROM MY GADGET OF MASS DESTRUCTION

MohitDMO said:
Dont spam
SENT FROM MY GADGET OF MASS DESTRUCTION
Click to expand...
Click to collapse
Why do you consider that we are spamming ? This is a general thread not a development thread first of all..
And here I am unable to boot my device, and peers like marcussmith2626 are trying to help me get to use my device.
So whats spamming here. As I dont see anything irrevelant.
---------- Post added at 06:12 PM ---------- Previous post was at 06:04 PM ----------
marcussmith2626 said:
are you using a pit file? its not required
did you say that firmware worked before but its not now or didnt work at all?
try using a different version of odin
try odin 1.85
what kernel did you try and flash
did you format system data and cache in cwm and then try to mount?
Click to expand...
Click to collapse
I tried once using a pit file, and once without , deosnt change anything.
I tried the version of Odin you ve sent, but its the same result. Doesnt help. The process still fails.
I tried to flash hells fusion, and thats when things went bad. Before I was on PErcy's/WhiteXP's Kernel I suppose.
I am unable to format system data cache, because I am even uanbel to mount them, which seems to be the problem now.
Else I should be able to flash a custom rom easily.
So need to get over the unable to mount issue, rest should fall in place.

nanoharsha said:
Why do you consider that we are spamming ? This is a general thread not a development thread first of all..
And here I am unable to boot my device, and peers like marcussmith2626 are trying to help me get to use my device.
So whats spamming here. As I dont see anything irrevelant.
---------- Post added at 06:12 PM ---------- Previous post was at 06:04 PM ----------
I tried once using a pit file, and once without , deosnt change anything.
I tried the version of Odin you ve sent, but its the same result. Doesnt help. The process still fails.
I tried to flash hells fusion, and thats when things went bad. Before I was on PErcy's/WhiteXP's Kernel I suppose.
I am unable to format system data cache, because I am even uanbel to mount them, which seems to be the problem now.
Else I should be able to flash a custom rom easily.
So need to get over the unable to mount issue, rest should fall in place.
Click to expand...
Click to collapse
have you tried to actually format them? - you dont need to have them mounted to format them
all you need to do really is flash stock rom then in stock recovery not cwm select wipe data/factory reset
then you should be able to flash cwm and format system data cache and then mount them without after they have formatted without error

marcussmith2626 said:
have you tried to actually format them? - you dont need to have them mounted to format them
all you need to do really is flash stock rom then in stock recovery not cwm select wipe data/factory reset
then you should be able to flash cwm and format system data cache and then mount them without after they have formatted without error
Click to expand...
Click to collapse
I have tried both the things.
The stock rom flashing is failing via odin, the error message is as below :
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/022> Removed!!
And I am also unable to wipe cache/data etc, because of mount issue.

nanoharsha said:
I have tried both the things.
The stock rom flashing is failing via odin, the error message is as below :
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/022> Removed!!
And I am also unable to wipe cache/data etc, because of mount issue.
Click to expand...
Click to collapse
you didnt answer my previous question of did you manage to flash this firmwire successfully at all in the past as I havent fully tested flashing this firmeware myself - you said you flashed it before then flashed hyperion so did it flash correctly before or have you always had this error with this firmware?
try with this pit file
http://forum.xda-developers.com/attachment.php?attachmentid=1489509
The only solution I found is what iv already said
Recovery
Mounts and storage Format cache data and system (dont worry it says mount errors when you enter cwm just format them)
Download mode flash stock rom