Related
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
**Edit: I don't think I did use repartition...I usually never do....this all started after me trying to clean install via CWM from official rooted LPY it got stuck on formatting then rebooted and was on logo forever so I proceeded to use Odin flashing LPY failed, tried all methods posted here besides flashing kernel Abyuss note 4.2 from in PDA as someone here suggested but since I can't find one that works with Odin I just reflash LC1 rooted stock multiple times but no luck it fails and NAND Write Start which is almost at the end of flashing.
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:13)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Can't open the specified file. (Line: 1876)
All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
Did you backup your previous from ..if you did just go into recovery and restore it
Sent from my GT-N7000 using xda premium
You are making one huge mistake : you have the box "re-partition" selected. Uncheck that option and you should be good to go.
P_
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
Try to flash gingerbread rom from http://forum.xda-developers.com/showthread.php?t=1535025 i would try this one "N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)" because it a full wipe.
Here is how to solve.
1.flash stck GB rom
2.wipe data/cache from stock recovery.
3.now flash stock ics.
4.then flash another rom/ root kernel
Sent from my GT-N7000 using xda premium
awesome-member said:
Here is how to solve.
1.flash stck GB rom
2.wipe data/cache from stock recovery.
3.now flash stock ics.
4.then flash another rom/ root kernel
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
That' the safest way.
Sent from my Galaxy Note
Thanks guys, I tried reflashing stock GB lc1 and it stoped on odin pc sayig failed and I did not repartition this time. Tried reflashing stock ICS LPY with no luck...it fails.
If anyone has another option please let me know...I cannot access recovery only download mode when I try to access recovery it gives me " firmware upgrade failed encountered an issue. Please select recovery mode in kies & try gain" .....
jwais said:
Thanks guys, I tried reflashing stock GB lc1 and it stoped on odin pc sayig failed and I did not repartition this time. Tried reflashing stock ICS LPY with no luck...it fails.
If anyone has another option please let me know...I cannot access recovery only download mode.....
Click to expand...
Click to collapse
Try to find the pit file and use it with repartition checked.
Sent from my GT-N7000 using XDA
just to be sure,
did u kill all kies processes?
aww
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
idk how to i wish i could man
Kill KiesHelper.exe and KiesPDLR.exe and try to flash again
Yup killed all kies processes. Reflashing stock LC1 one last time with odin pc as suggested....pray for me
I had this similar issue. I had to completely un install Kies and then Odin worked without issue
Sent from my GT-N7000 using xda premium
i slashed my knees open, knelt with salt and lemon on the ground. i can't do this for long.... is your note ok (i hope i do not have to do some other kind of rituals for the flash procedure to work for you).
Ok guys after trying to reflash second time stock GB LC1 with odin pc this is what I get:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
It goes almost all the way but then somehow stops at the nand write part. Anyone has any clue?
Did you completely uninstall kies? It's worth a shot...
Sent from my GT-N7000 using xda premium
Uninstalling Kies right now...will try again flashing. Thanks!
take out your battery, restart the pc... and try another cable if possible.
make sure all firewalls and/or antivirus softwares are disabled. if it helps, run odin as administrator.
while you do that, i shall make a bonfire and prepare to dance around naked around the flame and chant the songs my great ancestors has been singing since time immemorial.
Ok, I think I found a pattern for the failed attempts during flashing...it always stalls and fails during the NAND Write Start.....anyone has any clue as to why?
Maybe it sounds stupid but what version of Odin do yo use?
Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.
AlwaysBeen said:
Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.
Click to expand...
Click to collapse
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing
AlwaysBeen said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing
Click to expand...
Click to collapse
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Which file do I exactly download from this link?
AlwaysBeen said:
Which file do I exactly download from this link?
Click to expand...
Click to collapse
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
I really appreciate the registering just to help me out! Do i load the pit file with the MF3 tars? Or before?
bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED
AlwaysBeen said:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED
Click to expand...
Click to collapse
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:
kevp75 said:
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:
Click to expand...
Click to collapse
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
MatthewPresley said:
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
Click to expand...
Click to collapse
yeah... tried all that.
Stock Rooted NC1 ROM
Sent from my A110 using Tapatalk
Hi, I need help to root my Note 3 SM- N900T. Following the instructions ( http://forum.xda-developers.com/showthread.php?t=2466423 ) one by one. ODIN can see my phone (COM3), but when I pressed the start button nothing happens. ODIN v3.07 stay as frozen in SetupConnection and no progress bar can be seen anywhere. Not on the phone or ODIN. You can wait 30 minutes and nothing happens. What I am doing wrong? Thanks for your help.
This is the data from ODIN. Only Auto Reboot and F.Reset.Time are checked.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Ancientwarrior said:
Hi, I need help to root my Note 3 SM- N900T. Following the instructions ( http://forum.xda-developers.com/showthread.php?t=2466423 ) one by one. ODIN can see my phone (COM3), but when I pressed the start button nothing happens. ODIN v3.07 stay as frozen in SetupConnection and no progress bar can be seen anywhere. Not on the phone or ODIN. You can wait 30 minutes and nothing happens. What I am doing wrong? Thanks for your help.
This is the data from ODIN. Only Auto Reboot and F.Reset.Time are checked.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Click to expand...
Click to collapse
Check setting>general>security. Reactivation lock must be off
Ancientwarrior said:
Hi, I need help to root my Note 3 SM- N900T. Following the instructions ( http://forum.xda-developers.com/showthread.php?t=2466423 ) one by one. ODIN can see my phone (COM3), but when I pressed the start button nothing happens. ODIN v3.07 stay as frozen in SetupConnection and no progress bar can be seen anywhere. Not on the phone or ODIN. You can wait 30 minutes and nothing happens. What I am doing wrong? Thanks for your help.
This is the data from ODIN. Only Auto Reboot and F.Reset.Time are checked.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Click to expand...
Click to collapse
You might have a bad/corrupted download of cf-autoroot.
Download it again and give it a try.
If that don't work download a different
version of Odin.
Good luck!
Misterjunky said:
You might have a bad/corrupted download of cf-autoroot.
Download it again and give it a try.
If that don't work download a different
version of Odin.
Good luck!
Click to expand...
Click to collapse
Thanks for the answer. I try many ODIN versions (3.09, 3.07, 3.05) and two cf-autoroot (CF-Auto-Root-hlte-hltexx-smn9005 and CF-Auto-Root-hltetmo-hltetmo-smn900t). The thing is no progress bar can be seeing. ODIN does nothing. In other forums I read about that the reactivation lock must be off. But looking at the security tab, the phone does not have that feature anywhere.
Thank you.
Ancientwarrior said:
Hi, I need help to root my Note 3 SM- N900T. Following the instructions ( http://forum.xda-developers.com/showthread.php?t=2466423 ) one by one. ODIN can see my phone (COM3), but when I pressed the start button nothing happens. ODIN v3.07 stay as frozen in SetupConnection and no progress bar can be seen anywhere. Not on the phone or ODIN. You can wait 30 minutes and nothing happens. What I am doing wrong? Thanks for your help.
This is the data from ODIN. Only Auto Reboot and F.Reset.Time are checked.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Click to expand...
Click to collapse
I had this problem on windows 8. Works fine on windows 7 though.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
toastido said:
I had this problem on windows 8. Works fine on windows 7 though.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
Click to expand...
Click to collapse
I will try on another computer. This machine is Win7. Thanks!
Ancientwarrior said:
I will try on another computer. This machine is Win7. Thanks!
Click to expand...
Click to collapse
I did it! I use the same programs on a Win8.1 machine and it worked! Thanks! Still don’t know want when wrong with the other machine...
Glad you got it. I can't get it to work under 8/8.1... still use 7. Oh well.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
toastido said:
Glad you got it. I can't get it to work under 8/8.1... still use 7. Oh well.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
Click to expand...
Click to collapse
Where is the thank you button? or how can I use the thanks meter?
Ancientwarrior said:
Where is the thank you button? or how can I use the thanks meter?
Click to expand...
Click to collapse
If you're using Tapatalk, click the post, then click the thumbs up button at the top. If you're in the website from a pc, there will be a button that says "thanks" at the bottom left of each post. ?
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
So before all of this, my Sprint S4 was rooted but I don't think I installed a recovery on it as before this ****storm happened, trying to boot into a recovery didn't work, so I'm assuming I never installed one. So long story short, I was trying to install Cyanongenmod using their installer, wouldn't work after a few times and now my phone is stuck in the "firmware upgrade encountered an issue" and I can only boot into download mode, can't do anything else and I've tried using Kies recovery thing and nothing works. I've tried flashing new firmware in odin, everything I've tried always fails, gets stuck at "setup connection" a lot, tried different USB ports, cords, literally everything a few Google searches give me and I just cannot get this thing unbricked, and I'm just shocked why everything I tried to flash on it in odin just keeps failing.
I really, really need help from you guys as I need my phone for work and don't have any backup phones or anything, so I would appreciate 100% if someone can get me out this ****, thank you!
Also usually get this error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
SO, I made a stupid mistake and along with AP CSC and CP flashed BL to my Verizon S7. I tried to go back and do the steps correctly, but the odin flash's are failing now over and over. Get the "software update failed, use verizon repair assist." screen. Issue is in this state I can't get it in software install mode to use said repair assistant. Please tell me someone can help me fix my screw up!? I have googled and tried to solve this, but I came up empty.
T1geR086 said:
SO, I made a stupid mistake and along with AP CSC and CP flashed BL to my Verizon S7. I tried to go back and do the steps correctly, but the odin flash's are failing now over and over. Get the "software update failed, use verizon repair assist." screen. Issue is in this state I can't get it in software install mode to use said repair assistant. Please tell me someone can help me fix my screw up!? I have googled and tried to solve this, but I came up empty.
Click to expand...
Click to collapse
What did you flash, firmware wise? What are you trying to flash?
I was going from the newly updated PH1 (OTA) to Samsung_G930x_QC_Rooted_BOOT.TAR I was just not paying attention ...lol singing and goofing off but yeah I flashed BL AP CP and CSC.
ps. Then I did try to go back and flash the right things, but not surprisingly it was unsuccessful. I after that found a stock tar to try to redo the whole thing (G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.zip) and that was also failed.
T1geR086 said:
I was going from the newly updated PH1 (OTA) to Samsung_G930x_QC_Rooted_BOOT.TAR I was just not paying attention ...lol singing and goofing off but yeah I flashed BL AP CP and CSC.
ps. Then I did try to go back and flash the right things, but not surprisingly it was unsuccessful. I after that found a stock tar to try to redo the whole thing (G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.zip) and that was also failed.
Click to expand...
Click to collapse
I was having flashing issues before. I was doing it on my laptop. What I did was deleted the firmware files and re-downloaded it and was able to flash.
Sent from my SM-G930V using XDA-Developers mobile app
ickedmel said:
I was having flashing issues before. I was doing it on my laptop. What I did was deleted the firmware files and re-downloaded it and was able to flash.
Sent from my SM-G930V using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried re downloading:
BL_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
AP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
CP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
CSC_VZW_G935VVZW4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
HEROQLTE_USA_VZW.pit Tried several more times.
Errors:
"re-partition operation has failed" nearly immediately after start of ODIN flash every time.
On boot attempts it does "erase" and "System Update", reboots and comes up in Android Recovery with "Supported API: 3" and "dm-verity verification failed..."
If someone could point me I don't mind learning and figuring it out, but yeah....tad frusterated so I'm gonna smoke some cancer lol brb.
Are you using the modified odin? The original one wont work. The modified one is in the root guide.
Do what he suggests. Use the modified Odin. If that does not work try swapping cables, computers, etc...
craazy82013 said:
Are you using the modified odin? The original one wont work. The modified one is in the root guide.
Click to expand...
Click to collapse
PrinceComsy version and the ? non PrinceComsy version linked in http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
Neither worked. Everything failed the same way as described previously (re-partition op. failed, and on recovery dm-vert failure)
Will try again.
Flash BL AP CP CSC, or BL AP CP CSC +pit or AP CP CSC?
Want to make sure I at least get this right.
T1geR086 said:
PrinceComsy version and the ? non PrinceComsy version linked in http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
Neither worked. Everything failed the same way as described previously (re-partition op. failed, and on recovery dm-vert failure)
Click to expand...
Click to collapse
Does the phone even boot? USB debugging on?
craazy82013 said:
Does the phone even boot? USB debugging on?
Click to expand...
Click to collapse
It powers on. then go's to recovery, I have turned on USB debugging while trying to figure out wtf I did last night through maintence boot or not sure what its called but it has the option to enable debugging.
T1geR086 said:
It powers on. then go's to recovery, I have turned on USB debugging while trying to figure out wtf I did last night through maintence boot or not sure what its called but it has the option to enable debugging.
Click to expand...
Click to collapse
Check for usb debugging in maintenance mode. Power off device hold volume down and power at same time till maintenance mode shows up.
craazy82013 said:
Check for usb debugging in maintenance mode. Power off device hold volume down and power at same time till maintenance mode shows up.
Click to expand...
Click to collapse
Does it stay enabled or do I need to do it every so often. I will do it again, but I had already last night.
T1geR086 said:
Does it stay enabled or do I need to do it every so often. I will do it again, but I had already last night.
Click to expand...
Click to collapse
I would think it would stay. I know you did some of this. Im not a dev. Just trying to help. Redownload everything. Try a different computer. Different usb cable. Try everything. Gotta get back to it but ill hit up a dev and see what he thinks. Sorry if im no help brother
craazy82013 said:
I would think it would stay. I know you did some of this. Im not a dev. Just trying to help. Redownload everything. Try a different computer. Different usb cable. Try everything. Gotta get back to it but ill hit up a dev and see what he thinks. Sorry if im no help brother
Click to expand...
Click to collapse
Not trying to be short. Sorry if it came off that way. I appreciate hitting up a dev. I've been rather fixated on fixing this...*phone detox itch*
New error (or first I noticed it) when attempting to flash:
BL_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
AP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CSC_VZW_G935VVZW4APH1_CL8875708_QB10880117_REV02_u ser_low_ship_MULTI_CERT.tar
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Auth error instead of re-partition failure.
T1geR086 said:
New error (or first I noticed it) when attempting to flash:
BL_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
AP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CSC_VZW_G935VVZW4APH1_CL8875708_QB10880117_REV02_u ser_low_ship_MULTI_CERT.tar
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Auth error instead of re-partition failure.
Click to expand...
Click to collapse
What version of Odin are you using?
Illogi.xbone said:
What version of Odin are you using?
Click to expand...
Click to collapse
3.12 Princecomsy
I am DLing APE1 zip from sammobile because that's the version that shows up in recovery. heh have 2hrs left on that DL (non premium throttling)
Try using Odin 3.14
T1geR086 said:
3.12 Princecomsy
I am DLing APE1 zip from sammobile because that's the version that shows up in recovery. heh have 2hrs left on that DL (non premium throttling)
Click to expand...
Click to collapse
Dont think you can downgrade ph1. Bootloader supposedly changed. There is a faster download in the forum. Way faster. http://downloadmirror.co/29Uj/G930VVRU2APE1_G930VVZW2APE1_VZW.zip<br />
Illogi.xbone said:
Try using Odin 3.14
Click to expand...
Click to collapse
Ty will try. Best place to find that? Odin downloader lists odin3 3.11.2 as latest? Didn't see any 14 ending versions.