SO, I made a stupid mistake and along with AP CSC and CP flashed BL to my Verizon S7. I tried to go back and do the steps correctly, but the odin flash's are failing now over and over. Get the "software update failed, use verizon repair assist." screen. Issue is in this state I can't get it in software install mode to use said repair assistant. Please tell me someone can help me fix my screw up!? I have googled and tried to solve this, but I came up empty.
T1geR086 said:
SO, I made a stupid mistake and along with AP CSC and CP flashed BL to my Verizon S7. I tried to go back and do the steps correctly, but the odin flash's are failing now over and over. Get the "software update failed, use verizon repair assist." screen. Issue is in this state I can't get it in software install mode to use said repair assistant. Please tell me someone can help me fix my screw up!? I have googled and tried to solve this, but I came up empty.
Click to expand...
Click to collapse
What did you flash, firmware wise? What are you trying to flash?
I was going from the newly updated PH1 (OTA) to Samsung_G930x_QC_Rooted_BOOT.TAR I was just not paying attention ...lol singing and goofing off but yeah I flashed BL AP CP and CSC.
ps. Then I did try to go back and flash the right things, but not surprisingly it was unsuccessful. I after that found a stock tar to try to redo the whole thing (G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.zip) and that was also failed.
T1geR086 said:
I was going from the newly updated PH1 (OTA) to Samsung_G930x_QC_Rooted_BOOT.TAR I was just not paying attention ...lol singing and goofing off but yeah I flashed BL AP CP and CSC.
ps. Then I did try to go back and flash the right things, but not surprisingly it was unsuccessful. I after that found a stock tar to try to redo the whole thing (G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.zip) and that was also failed.
Click to expand...
Click to collapse
I was having flashing issues before. I was doing it on my laptop. What I did was deleted the firmware files and re-downloaded it and was able to flash.
Sent from my SM-G930V using XDA-Developers mobile app
ickedmel said:
I was having flashing issues before. I was doing it on my laptop. What I did was deleted the firmware files and re-downloaded it and was able to flash.
Sent from my SM-G930V using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried re downloading:
BL_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
AP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
CP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
CSC_VZW_G935VVZW4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.tar
HEROQLTE_USA_VZW.pit Tried several more times.
Errors:
"re-partition operation has failed" nearly immediately after start of ODIN flash every time.
On boot attempts it does "erase" and "System Update", reboots and comes up in Android Recovery with "Supported API: 3" and "dm-verity verification failed..."
If someone could point me I don't mind learning and figuring it out, but yeah....tad frusterated so I'm gonna smoke some cancer lol brb.
Are you using the modified odin? The original one wont work. The modified one is in the root guide.
Do what he suggests. Use the modified Odin. If that does not work try swapping cables, computers, etc...
craazy82013 said:
Are you using the modified odin? The original one wont work. The modified one is in the root guide.
Click to expand...
Click to collapse
PrinceComsy version and the ? non PrinceComsy version linked in http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
Neither worked. Everything failed the same way as described previously (re-partition op. failed, and on recovery dm-vert failure)
Will try again.
Flash BL AP CP CSC, or BL AP CP CSC +pit or AP CP CSC?
Want to make sure I at least get this right.
T1geR086 said:
PrinceComsy version and the ? non PrinceComsy version linked in http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
Neither worked. Everything failed the same way as described previously (re-partition op. failed, and on recovery dm-vert failure)
Click to expand...
Click to collapse
Does the phone even boot? USB debugging on?
craazy82013 said:
Does the phone even boot? USB debugging on?
Click to expand...
Click to collapse
It powers on. then go's to recovery, I have turned on USB debugging while trying to figure out wtf I did last night through maintence boot or not sure what its called but it has the option to enable debugging.
T1geR086 said:
It powers on. then go's to recovery, I have turned on USB debugging while trying to figure out wtf I did last night through maintence boot or not sure what its called but it has the option to enable debugging.
Click to expand...
Click to collapse
Check for usb debugging in maintenance mode. Power off device hold volume down and power at same time till maintenance mode shows up.
craazy82013 said:
Check for usb debugging in maintenance mode. Power off device hold volume down and power at same time till maintenance mode shows up.
Click to expand...
Click to collapse
Does it stay enabled or do I need to do it every so often. I will do it again, but I had already last night.
T1geR086 said:
Does it stay enabled or do I need to do it every so often. I will do it again, but I had already last night.
Click to expand...
Click to collapse
I would think it would stay. I know you did some of this. Im not a dev. Just trying to help. Redownload everything. Try a different computer. Different usb cable. Try everything. Gotta get back to it but ill hit up a dev and see what he thinks. Sorry if im no help brother
craazy82013 said:
I would think it would stay. I know you did some of this. Im not a dev. Just trying to help. Redownload everything. Try a different computer. Different usb cable. Try everything. Gotta get back to it but ill hit up a dev and see what he thinks. Sorry if im no help brother
Click to expand...
Click to collapse
Not trying to be short. Sorry if it came off that way. I appreciate hitting up a dev. I've been rather fixated on fixing this...*phone detox itch*
New error (or first I noticed it) when attempting to flash:
BL_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
AP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CSC_VZW_G935VVZW4APH1_CL8875708_QB10880117_REV02_u ser_low_ship_MULTI_CERT.tar
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Auth error instead of re-partition failure.
T1geR086 said:
New error (or first I noticed it) when attempting to flash:
BL_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
AP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CP_G935VVRS4APH1_CL8875708_QB10880117_REV02_user_l ow_ship_MULTI_CERT.tar
CSC_VZW_G935VVZW4APH1_CL8875708_QB10880117_REV02_u ser_low_ship_MULTI_CERT.tar
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Auth error instead of re-partition failure.
Click to expand...
Click to collapse
What version of Odin are you using?
Illogi.xbone said:
What version of Odin are you using?
Click to expand...
Click to collapse
3.12 Princecomsy
I am DLing APE1 zip from sammobile because that's the version that shows up in recovery. heh have 2hrs left on that DL (non premium throttling)
Try using Odin 3.14
T1geR086 said:
3.12 Princecomsy
I am DLing APE1 zip from sammobile because that's the version that shows up in recovery. heh have 2hrs left on that DL (non premium throttling)
Click to expand...
Click to collapse
Dont think you can downgrade ph1. Bootloader supposedly changed. There is a faster download in the forum. Way faster. http://downloadmirror.co/29Uj/G930VVRU2APE1_G930VVZW2APE1_VZW.zip<br />
Illogi.xbone said:
Try using Odin 3.14
Click to expand...
Click to collapse
Ty will try. Best place to find that? Odin downloader lists odin3 3.11.2 as latest? Didn't see any 14 ending versions.
Related
Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.
AlwaysBeen said:
Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.
Click to expand...
Click to collapse
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing
AlwaysBeen said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing
Click to expand...
Click to collapse
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Which file do I exactly download from this link?
AlwaysBeen said:
Which file do I exactly download from this link?
Click to expand...
Click to collapse
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
I really appreciate the registering just to help me out! Do i load the pit file with the MF3 tars? Or before?
bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED
AlwaysBeen said:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED
Click to expand...
Click to collapse
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:
kevp75 said:
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:
Click to expand...
Click to collapse
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
MatthewPresley said:
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
Click to expand...
Click to collapse
yeah... tried all that.
Stock Rooted NC1 ROM
Sent from my A110 using Tapatalk
I was updating my samsung galaxy grand prime duos (SM-G531H) with kies, not knowing my cable was broken while the updating the phone disconnected and i ended up with a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again" i changed the cable and decided to flash the update with odin... process went through and the phone booted up normal with the new update installed... now i decided to factory reset so i went into the stock recovery and did but it came up with a bunch of errors which i didn't take note of... i flashed twrp and repaired the file system, wiped system and then i flashed the the firmware together with the pit file on odin once more... the phone booted up normal and i was using it and eveything when i put it to charge and came back 10 mins later the phone was off.... when i powered it on it just stays on the "samsung galaxy grand prime" screen and doesn't boot... it doesn't go into recovery anymore it just hangs whe're it says "recovery is not seandroid enforcing" i tried flashing the firmware with odin again but every single time i tried it keeps failing at...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried the repair firmware together with the pit file and it gets stuck at
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
it's been like that for over an hour now... any help would be much appreciated guys.
No
Try with orignal firmware
nihu.46 said:
Try with orignal firmware
Click to expand...
Click to collapse
I tried everything and nothing seems to work
I also get this problem. Does anyone know how to fix it?
Ghettovybz said:
I tried everything and nothing seems to work
Click to expand...
Click to collapse
Remove kies. Reinstall samsung drivers.
Find and flash TWRP 3.0.0 with odin ( on recovery is not SEAndroid enforcing hold volume up and home for 5-10 seconds. Also flash the Custom Kernel by eyeless95 on the forum, its sepermissive.
u0aol said:
Remove kies. Reinstall samsung drivers.
Find and flash TWRP 3.0.0 with odin ( on recovery is not SEAndroid enforcing hold volume up and home for 5-10 seconds. Also flash the Custom Kernel by eyeless95 on the forum, its sepermissive.
Click to expand...
Click to collapse
What about for SM-G530H?
Do u have the link for the kernel?
After installing kernel what should I do then?
Two ways. Find stock rom in Sammobile and install via Odin (newest). Or try once again install it via Kies. You sould can restore it with Kies, but dont plug phone to computer. Write down S/N or something like that (it's under battery) and model, and Kies will download system
argounaut said:
What about for SM-G530H?
Do u have the link for the kernel?
After installing kernel what should I do then?
Click to expand...
Click to collapse
I have a g531h so I'm not sure. I'm below ten posts so i cant post links.
There are kernels and recoverys in the development section that work fine for your phone .
I installed the Superstarz ROM and TWRP onto my phone (Samsung Galaxy On5) (SM-G550T). The phone booted, and everything was working fine.
Like an idiot, I decided I didn't need to keep "usb debugging" and "oem unlock" enabled, so I turned them both off. When I restarted my phone, it was stuck at the boot screen ,with "custom binary blocked by frp lock" showing in red.
I cannot boot into recovery or into the system. I'm only able to boot into download (Odin) mode. I tried to flash the stock ROM in Odin, but FRP prevents anything from being flashed. I cannot re-enable "oem unlock" or "usb debugging" because I'm unable to boot into the system.
What are my options here?
halomaster said:
I installed the Superstarz ROM and TWRP onto my phone (Samsung Galaxy On5) (SM-G550T). The phone booted, and everything was working fine.
Like an idiot, I decided I didn't need to keep "usb debugging" and "oem unlock" enabled, so I turned them both off. When I restarted my phone, it was stuck at the boot screen ,with "custom binary blocked by frp lock" showing in red.
I cannot boot into recovery or into the system. I'm only able to boot into download (Odin) mode. I tried to flash the stock ROM in Odin, but FRP prevents anything from being flashed. I cannot re-enable "oem unlock" or "usb debugging" because I'm unable to boot into the system.
What are my options here?
Click to expand...
Click to collapse
You should still be able to flash full stock from recovery, the version of Android you were on or higher. Even with frp.
Sent from my SM-T350 using Tapatalk
Koognod said:
You should still be able to flash full stock from recovery, the version of Android you were on or higher. Even with frp.
Sent from my SM-T350 using Tapatalk
Click to expand...
Click to collapse
This is what happens when I try to flash anything in Odin. Same results in both Odin 3.12.3 and 3.10.7
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Flashing latest firmware will solve this problem...
Or
Other you can try Z3X Box ...
There are many tutorial on youtube..
Was there no answer to this problem or some what of a outcome? I am having the same issues,odin log identical
i have done this same thing - do not know enough about "flashing" and "roms" to understand these solutions. can someone please help?
do i need to just download Odin and try to "flash" from my pc?
fixed mine with this SM-G550T1 BRICK FRP BLOCK FIX
glennnall said:
i have done this same thing - do not know enough about "flashing" and "roms" to understand these solutions. can someone please help?
do i need to just download Odin and try to "flash" from my pc?
Click to expand...
Click to collapse
The stock rom you have is the wrong version. i got the info and fixed mine here..
https://androidforums.com/threads/galaxy-on5-metropcs-t-mobile-stock-firmware.1140060/
then i got the software from:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
the exact firmware for metropcs is:
Country/Region USA
Product Code TMK
OS Version Marshmallow (Android 6.0.1)
Release Date 23.03.2017
PDAG550T1UVU2AQC4
CSCG550T1TMK2AQC4
Phone G550T1UVU2AQC4
once downloaded and extracted it is self explanatory on where to place files in Odin (files are labeled for appropriate slots) hope this helps. mine was bricked for 2 weeks determination is the key to success.
So a few months back I followed PSouza's guide (https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039) to rooting the S7 Edge and everything worked perfectly. As of late, the phone has had many general performance issues and I decided today unrooting may be the best option for right now. So I cracked back open the thread and followed the instructions and low and behold, as always, something had to go wrong. For starters, Odin gives me a fail before it even really gets started (log below).
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!"
The phone itself gives a SW Rev check fail after that (in the download mode).
So I thought to myself I'd just keep it in the meantime and just restart it and use it for now, but low and behold I now can't leave download mode. If I restart regularly, I'm brought back to a software update failed screen, and if I switch to recovery mode (? vol up + home + power) I've wiped the cache partition as another forum suggested, but then going to reboot system now... That restart brings me right back into recovery. I currently have the phone off charger in hopes the battery dies and something changes then.
I'm also downloading the very very latest firmware update for the S7 Edge in hopes that maybe Odin will like it a bit better than this one (VZW_G935VVRU2APE1.zip).
Any ideas? Any solution that gets me a working phone again, I'll definitely make a donation to your PayPal! Thanks in advance for any help!
To anyone reading this having the same issue, follow the instructions in this post (https://forum.xda-developers.com/showpost.php?p=71133959&postcount=27) worked like a charm.
zwroberts1 said:
To anyone reading this having the same issue, follow the instructions in this post (https://forum.xda-developers.com/showpost.php?p=71133959&postcount=27) worked like a charm.
Click to expand...
Click to collapse
Have you tried using smart switch? It is a PC app by Samsung which will automatically choose the correct firmware for you, flash it and also unroot your phone. It is the easiest way to do it.
TheSproker said:
Have you tried using smart switch? It is a PC app by Samsung which will automatically choose the correct firmware for you, flash it and also unroot your phone. It is the easiest way to do it.
Click to expand...
Click to collapse
The issue I was having was that Smart Switch wasn't recognizing my phone off the bat, and when I went to emergency recovery, it would say my serial number was incorrect so it wasn't useable for me.
I had used TWRP to install SuperSU to root. This seemed successful, but a day or two later the phone had powered itself off, and on power-up loops displaying the tiny red "Custom binary is blocked by FRP Lock" message. The phone will boot into download mode, but won't enter recovery mode.
I tried repeating the install of TWRP using ODIN 3.12, but now that fails. Tried installing factory images (\BL_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5 etc.) w/ ODIN, and that fails too.
Is this an indication I don't have the latest image files? ODIN messages below:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Made some progress
Reviewing other threads I found a not that talked about installing only the "AP" file using ODIN. That seems to have worked.
BHarris said:
Reviewing other threads I found a not that talked about installing only the "AP" file using ODIN. That seems to have worked.
Click to expand...
Click to collapse
what worked? and what firmware. I have 2 on5's one sm-G-550T and a sm-g550T1 that both ended up with the "custom binary blocked by FRP lock" on the same day..
Please help!
I just tried a bin I downloaded from S U site and it didn't work. Gotta love the On5 lol.
Custom Binary Lock
The same happened to me: i have not found a complete solution, the closest i get to anything is; i put the On5 in Odin3 v3.12 and select the AP option and putting the recovery.tar file and running it. it goes good till its done and the result is Custom Binary (recovery) blocked by FRP lock in green letters. but still no success. i have tried trwp recovery, the home.tar file, each file by them selves and having trouble. i may not be an expert at this type of programimng but i pick things up quickly if there is any solution to my problem please let me know. thx............ by the way i have also tried kies and wont connect to it as well
Same Problem FRP Blocked Bootlooping
I did all the same as you and have the same problem. Everything was fine till the phone got restarted.
XDA HEEEEEEEELP!!
SeleneKnightress said:
I did all the same as you and have the same problem. Everything was fine till the phone got restarted.
XDA HEEEEEEEELP!!
Click to expand...
Click to collapse
You need to reinstall the firmware using Odin. Then, when you root again, you need to make sure you have oem unlock and usb debugging on in the developer options. Not having those on and rebooting when rooted cause the custom binary problem.