hello all.please help..
i have a big problem with HTC HD2 LEO....this is what i done..
i flash a wrong stock ruu (i dont remember what was) and after of this,wont boot (black scrren)and dosent go to bootload .the phone looks like DEAD..
please any healp wellcome...
regards to every one...
.alex.
Sorry to say this, but wrong section mate. This is the General Section.
Which firmware are u running? I can guide you to the correct forum.
"To err is human, to forgive is divine"
Sent from my SGS II
htc hd2 leo
i dont know what firmware i had.just i try to flash new ruu,and i had that problem.
Windows mobile? EU HD2? US ROM? If so it's dead.... Completely dead, sorry.
If that's not the case then more info is needed to resolve the issue. Also, thread moved.
Sent From My Fingers To Your Face......
i dont know, what firmware was.BUT was for hd2 europe,and mine is US.((((BIG MISTAKE..)))
and now how resolve the issue?
conantroutman said:
EU HD2? US ROM? If so it's dead.... Completely dead, sorry.
Click to expand...
Click to collapse
wrong way around, eu hd2 can take us roms no problems at all. (thats how you unlock teh extra ram on an eu hd2)It's eu roms that destroy us hd2s.
@op. phone got red end key green send key? says t-mobile at the top?
if yes, then it sounds like you killed it with an eu rom (were you trying to change the language by any chance?)
check the battery pins carefully for bent pins, but if it isnt that, if it IS a eu rom meets tmous phone brick, then only a JTAG can repair it.
samsamuel said:
wrong way around, eu hd2 can take us roms no problems at all. (thats how you unlock teh extra ram on an eu hd2)It's eu roms that destroy us hd2s.
Click to expand...
Click to collapse
Lol, shows how long it's been since I hung around these parts.
Sent From My Fingers To Your Face......
yes the phone got red end key green send key.and says t-mobile at the top.
Well if you flashed an EU ROM then you likely radio bricked it. Check for bent pins first since there's a slight chance you may have gotten lucky, but otherwise only a JTAG will fix it.
i check the battery pins ,its ok.
thank you for your help.
do you know another way to brik it up?
I'm not quite sure what you mean by that. If you're asking if there are any other ways you could have bricked then there aren't as far as I know. If you're asking if there are any other ways of fixing it then you could replace the motherboard manually.
Related
I am new in this type of phone and I bricked it. how I flash a rom with out HSPL and the phone dont do nothing only one thing when I connect to the computer it reconize it like Qualcomm CDMA Technologies MSM but now I dont know what to do to fix it. I think the phone is not damage because the pc reconize it. please help me fix it if there is away to . thankyou
sounds like you have flashed an incorrect radio. Did you by any chance try and flash a non tmous stock rom? Cos thats what happens if you flash an incorrect (non tmous) stock rom because they all include a radio that WILL NEVER work on the tmous.
The phone is dead. Sorry.
the rom I flash it work with my phone because I flash it before. The problem was that I flash my phone to stock and I forgot to HSPL to flash the same rom I had. I think there is a solucion for thins because the phone is like he does't have rom install.
I'm not too knowledgeable on this, but I think you flashed a wrong SPL base or something for the ROM you used to use. Having said that, making multiple threads does not accelerate the rate at which people respond to your problem, so please stop it.
what rom did you flash?
this the rom I flash NorgzRom.2.13.1.N0R.6Z tmous. I have it install on my other HD2 right now and it work perfectly. I brick it because I flash it without HSPL. I what to know if someone know's how to fix it. thanks
Let's see if I can sort the problem out, as your grammar leaves much to be desired.
You took a phone with a custom ROM already on it, and flashed it back to the stock ROM. Which stock ROM? The thing is, depending on how/which ROM you flashed, your unlocked version of SPL 2.08 could have been replaced with the updated and locked down SPL 2.10. Attempting to flash a custom ROM would then result in what you're seeing now.
You then decided to flash NorgzRom 2.13.
The phone now does not boot or do anything except for show up on your computer when connected via USB.
Does this cover what happened?
My suggestion is to attempt a Task 29; although I highly doubt it will work.
The symptoms you are having are the same ones that manifest when a bad radio is flashed. At this point if T29 fails call T-mobile, play dumb, and get the phone taken in under warranty. Currently there is no other solution.
Best of luck
kelkey said:
I am new in this type of phone and I bricked it. how I flash a rom with out HSPL and the phone dont do nothing only one thing when I connect to the computer it reconize it like Qualcomm CDMA Technologies MSM but now I dont know what to do to fix it. I think the phone is not damage because the pc reconize it. please help me fix it if there is away to . thankyou
Click to expand...
Click to collapse
Regarding your connection to the PC:
Don't worry about the "Qualcomm CDMA Technologies MSM" message -- many phones (including the HD2) when connected to the PC identify themselves in such a way as to match this driver. So the fact that Windows is seeing the phone and trying to install this driver is a good thing. Once Windows searches Windows Update it will identify the *correct* driver (something like "HTC USB Sync" if I remember correctly) and install it.
I believe you can also install this Windows Mobile Device Center update that will allow you to skip the step of searching for drivers on Windows Update.
tai4de2 said:
Regarding your connection to the PC:
Don't worry about the "Qualcomm CDMA Technologies MSM" message -- many phones (including the HD2) when connected to the PC identify themselves in such a way as to match this driver. So the fact that Windows is seeing the phone and trying to install this driver is a good thing. Once Windows searches Windows Update it will identify the *correct* driver (something like "HTC USB Sync" if I remember correctly) and install it.
I believe you can also install this Windows Mobile Device Center update that will allow you to skip the step of searching for drivers on Windows Update.
Click to expand...
Click to collapse
Ummm...what does that have to do with the fact that his phone will not boot?
I tried with windows mobile device center and active sync. but nothing happens.It keeps saing to install the drivers for this devices (Qualcomm CDMA Technologies MSM) .I hope some one get a anwser for this problem.I all ready got a new one because of the injurent but I wish to fix this one. here is the link for my video, so you can see the problem.Sorry for my bad ingles because I speak spanish,hope you understand http://www.youtube.com/watch?v=NZE70gwHmSc. please live comments. Thankyou!
Hi, I know you assured us the same rom was loadeed onto your other phone, but having just watched yor video, that is exactly what happens when you flash the wrong radio to a tmous. The phone wont turn on, nothing on screen, and when you connect to PC it shows up as qualcomm.
There are a fair number of posts with exactly this behavour, and all of them are down to the wrong radio.
It may be that it is just a coincidence and that the phone has died for some other reason, but I would guess the result is still the same - unrecoverable.
Still under warranty?
I have one question can I clone my new HD2 the one I have from the warranty with the one is damage. Our if there is a program that do this. I mean like transfer all the progaraming from the Hd2 (working) to the damage one. please if someone know's let me know. Thankyou very much!
There is nothing you can do. I know you wish there was because it is a lousy circumstance but you can't do anything once it's bricked. Get a new one if you haven't already and move on. I hate having to be so repetitive but you don't seem to understand. Plenty of people have bricked...just talk to T-mobile, act like you don't know what happened, get a new one under warranty, and move on.
~Jasecloud4
Help for bricked phone
samsamuel said:
sounds like you have flashed an incorrect radio. Did you by any chance try and flash a non tmous stock rom? Cos thats what happens if you flash an incorrect (non tmous) stock rom because they all include a radio that WILL NEVER work on the tmous.
The phone is dead. Sorry.
Click to expand...
Click to collapse
I think this what happened also to my unlocked Tmobile HTC HD2. I now have a bricked phone too...
With all our experts here, is there really no way that we can fix a bricked HTC HD2 besides sending it back to T-mobile?
allanbsutarez said:
I think this what happened also to my unlocked Tmobile HTC HD2. I now have a bricked phone too...
With all our experts here, is there really no way that we can fix a bricked HTC HD2 besides sending it back to T-mobile?
Click to expand...
Click to collapse
There is no way to undo the damage. You have to make sure you know exactly what you're doing when flashing a rom to your phone. All the experts in the world can't help you if you don't do your research first. It is your responsibility to make sure you are flashing a compatible rom or radio. I don't intend to sound harsh but you need to read, read, read then read again for good measure. Good luck and just play dumb when you contact T-Mobile.
Bricked hd2
I am kinda new to this forum. I just purchased my HD2 on June 30th and prior to that I was a Blackberry power user.
I have bricked my Blackberry devices MANY times and each time I was able to recover it so I had no fear of installing a new OS. It got so bad that every time a leaked or official OS was released for my Bold 9700 I would install it and Blackberry OS updates are released several times in a month sometimes.
But in the last couple of weeks of HD2 ownership I have "thought" about installing a cooked ROM but there is no room for error. I would hate to brick this HD2 and I just got it.
Hell.......I work in the IT field on workstations, servers......ect and I have no fear of working on those systems because I know I can recover the data and the system if need be. Since a bricked HD2 is basically a pretty paperweight I will wait until I am seriously comfortable with the process.
Until that time I'll just continue to pick up tips and tricks for this great device!
squire366 said:
I am kinda new to this forum. I just purchased my HD2 on June 30th and prior to that I was a Blackberry power user.
I have bricked my Blackberry devices MANY times and each time I was able to recover it so I had no fear of installing a new OS. It got so bad that every time a leaked or official OS was released for my Bold 9700 I would install it and Blackberry OS updates are released several times in a month sometimes.
But in the last couple of weeks of HD2 ownership I have "thought" about installing a cooked ROM but there is no room for error. I would hate to brick this HD2 and I just got it.
Hell.......I work in the IT field on workstations, servers......ect and I have no fear of working on those systems because I know I can recover the data and the system if need be. Since a bricked HD2 is basically a pretty paperweight I will wait until I am seriously comfortable with the process.
Until that time I'll just continue to pick up tips and tricks for this great device!
Click to expand...
Click to collapse
There is plenty of room for error , but the ONE thing you cannot do is flash an incompatible Radio, out of all the things you can do that is only one, the MAIN one ...
If it is a TMOUS HD2, which I assume it is you cannot flash any radio to be safe, prior to 2.08 or any radio that has x.xx.51.x in it ... Pretty much anything else you do short of a hardware failure there is a recovery option ...
so TMOUS HD2 Nothing but Official TMO ROMs or TMOUS compatible custom ROMs and TMO Compatible Radios ...
EU ROMs , may brick your device if they have a radio ..
HTC ROMs , may brick your device if they have a radio
Hey all! I'm kinda new to this windows mobile stuff also...I used to be a blackberry man, but couldn't resist the hype on the htc hd2 so i jumped on the wagon and got one. I'm paying full price ($400.00) so I am definitly afraid of doing a rom flash. After reading all the horror stories on here and seeing all the different roms out there...it's just to risky for me. The last thing I need in this economy is a $400.00 paper wieght. There has to be an easier way to do this rom stuff. Does anyone know of a rom that works for sure...or are they all problematic?
kelkey said:
I tried with windows mobile device center and active sync. but nothing happens.It keeps saing to install the drivers for this devices (Qualcomm CDMA Technologies MSM) .I hope some one get a anwser for this problem.I all ready got a new one because of the injurent but I wish to fix this one. here is the link for my video, so you can see the problem.Sorry for my bad ingles because I speak spanish,hope you understand http://www.youtube.com/watch?v=NZE70gwHmSc. please live comments. Thankyou!
Click to expand...
Click to collapse
did you try the wmdc update in the prev. post that has the drivers?
nrfitchett4 said:
did you try the wmdc update in the prev. post that has the drivers?
Click to expand...
Click to collapse
This threads from May. His phones probably been replaced...
Hi All,
i installed HSPL2 2.8.0000 i think and i installed Kumar ROM. after a week i installed non tmobile ROM and my phone is dead. it does not show the phone is charging and it does not turn on at all. i try Volume + Power and nothing happens. if i get a replacement phone from tmobile, do you guys think they can find out what went with this phone ? can they hold me any legal terms ? what worst can happen if they find out ?
thanks
I work for tmo customer care and the worst case scenario is that you'll be charged a $100 out of warranty fee as the issue was caused by human error not the manufacturer. As far as I am aware there are no legal ramifications. Just call and say your phone won't turn on and you don't know why. They will run you through all the troubleshooting, just make them understand the issue is NOT with your battery or charger as they may want to replace those first if they believe its a power issue.
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
thank you all.
you guys are the best...
Bricked my tmous HD2
samsamuel said:
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
Click to expand...
Click to collapse
Hi there all,
Just want to confirm one thing as I have read over 100 posts and did not find a clear answer.
So I bricked my TMOUS HTC HD2 and I Have tried all ways to get into bootloader, but no luck (v. down + power) like a million times and every time I hook the phone to the PC i get the Qualcomm Diagnostics interface 3197 com port.
These where the steps I did before it got bricked:
1- Flashed using HSPL3 to 2.08.HSPL from SPL 2.08.0000
2- To change language I Installed the following ROM (_HTC HD2_RUU_Leo_HTC_ARA_1.66.415.4_Radio_Signed_15.30. 50.07U_2.06.51.07_Ship)
3- Got a message that phone was successfully flashed with the new ROM.
4- Phone got shutdown and bricked/dead
These are my phone details before I did any of the above as I saved them before I did anything in case of any damage and forgot to investigate radio issues hehehehehe:
Rom Version: 2.10.531.1 (82076) WWE
Rom Date:02/22/10
Manila Version:2.5.20121412.1
OS Version:5.2.21889 (21889.5.0.87)
Radio Version:2.08.50.08_2
After all the posts I read, I understand that my mistake was that I flashed My tmous HD2 with a .51 radio and that's the cause for the phone to brick.
My question is:
is it possible in any way for me or a tmous service center to enter into bootloader mood using any means. if no than I'm verrrrry happy cuz they will never be able to see the HSPL I flashed.
I would appreciate your confirmation. I know you mentioned it above that they can't, but just wanted to confirm before i send it to them.
Thanks to all the help we get from everyone here. Keep up the good work
***we live and learn***
Yes. Your situation is exactly the same as the OPs. Youre ok. Send it in. Get a new one.
help!!!!!
so i think i just bricked mt hd2, i was flashing the radio rom and now the phone wont do anything......
i was trying to find a radio that worked with android.
the Fing part is that this is the replace phone i just got in and now if i call back to tmobile will they be able to see what i did to the phone, cause they will press charges for misleading info
so plz help with any info
email- [email protected]
thanks
send it in and get another one!
yeah i bricked my hd2 tmobile usa as well. I went to install HSPL again after i took it off and it went trough fine then it crashed. I'm waiting for a new 1 to arrive soon then i will send mine back and hope they cant get into anything. Nothing comes on the screen no lights at all, so i hope i can by pass
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
MLowed said:
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
there is no such thing as a unbrick unless u send your phone to a expert who can do it them selves which you can search for in the forums
ok i have HTC HD2 512 don't know how many versions out there!(just know mine was somthings to do with asian one!) i flashed radio with Radio_Leo_2.15.50.14 and it went till 99% and stucked!i can get to bootloader screen but not be able to unbrick it! funny thing is after puling out my battry for about an houre magldr loads!
i followed forum.xda-developers.com/showthread.php?t=668347 but no nothin!
i want to bye jtag! any tutorial on how to use jtag to fix bricked hd2? or any idea on how to unbrick it without jtag?
thanks
Please help!!!
My hd2 be came a stone after I flash this Asia version 1.48.707.2_Radio
the phone can not turn on, can not do the hard reset, volume + power, no help,
15 day warranty is over!!! when I connect the phone to computer, it need the Qualcomm cdma technologies msm Driver, but still can not turn on and I can not find the driver.
sounds like you have a tmous. (t mobile us) in which case the radio in that ROM you flashed has killed it. bad luck.
Yes, it was the tmobile version, anyone can help
yanrunmei25 said:
Yes, it was the tmobile version, anyone can help
Click to expand...
Click to collapse
Maybe someone can help, but I think it is a brick ....
But you could maybe try This
I hope you just did not get yourself a very expensive paperweight ....
watcher64 said:
But you could maybe try This
Click to expand...
Click to collapse
you need to be able to enter bootloader for that.
you could try the thread called "qualcomm drivers" but i wouldn't hold out much hope, that thread has been there ages, i would have thought it would have been outed as a solution by now. lots of people have killed their tmous with the wrong radio, no ones fixed one.
sorry my friend but your phone is dead as no solution for this has been found. there is a sticky on the tmous hd forum all about flashing radios and it clearly states not to flash any radio other than x.50.xxx.xx radios the one you flashed is a .48
tsalate said:
sorry my friend but your phone is dead as no solution for this has been found. there is a sticky on the tmous hd forum all about flashing radios and it clearly states not to flash any radio other than x.50.xxx.xx radios the one you flashed is a .48
Click to expand...
Click to collapse
(( .48 is the rom version, the radio in that rom is 2.05.51.05, , OP didnt give the whole filename ,,,, effect is still the same tho, , dead tmous ))
I have no Idea for now, except ship it back to HTC repair
Since it's only 15 days out of warranty, maybe you can talk to a manager or somebody at TMO and see if they can work something out for you. Just play dumb (shouldn't be too tough considering you flashed a .51 instead of .50... just kidding ), and say you're not thrilled about the device not turning on just 15 days after the warranty period. You can also tell em you might be forced to switch over to AT&T / Sprint if they don't fix it for free / for a subsidized price .
Somehow I get the felling that you don't use TMO and you don't live in the States, in which case, my sincerest condolences.
thanks for all the suggestions and posting
yanrunmei25 said:
Please help!!!
My hd2 be came a stone after I flash this Asia version 1.48.707.2_Radio
the phone can not turn on, can not do the hard reset, volume + power, no help,
15 day warranty is over!!! when I connect the phone to computer, it need the Qualcomm cdma technologies msm Driver, but still can not turn on and I can not find the driver.
Click to expand...
Click to collapse
如果你是自己刷机造成的话，违反了保修条款的，所以只能收费维修。在深圳原来卖的店铺检查后说是字库坏了。但是可以换新的。我付了450元，现在变成了HTC新加坡版，就是IMEI和SN都变成新加坡认可的。取回来之后，还是先解锁成1.42.0000，然后解锁成2.08。这时去新加坡HTC官网，用新的SN验证后下载亚洲版英文ROM。刷了以后，中文都可以看。中文输入法包括拼音、注音、仓吉等。东南亚有很多华人，另外新加坡是唯一官方使用简体中文的国家，所以选择新加坡比较好。现在一切都正常，中英文都可以，只是系统菜单都是英文，对我来说没有问题。你在美国的话，我想可能还是恢复T-Mobile的美洲版英文。解决的方法一个是不要解锁，安装中文字库和输入法，例如网上流传的雅黑等。我已下载，如果找不到我设法传给你。但是我现在的办法是，先解锁成SPL-1.42.0000，如果不是而是SPL-1.42.***也不行。有软件可以改的。如需要我可以把我用过成功的传给你。解成SPL-2.08后，T版和非T版都可以刷ROM了。我的刷完之后，并没有重新锁上，而还是保持在SPL-2.08。我的经验如此。英文我可以看，但是像这长篇大论我是写不出来的。
tvman said:
如果你是自己刷机造成的话，违反了保修条款的，所以只能收费维修。在深圳原来卖的店铺检查后说是字库坏了。但是可以换新的。我付了450元，现在变成了HTC新加坡版，就是IMEI和SN都变成新加坡认可的。取回来之后，还是先解锁成1.42.0000，然后解锁成2.08。这时去新加坡HTC官网，用新的SN验证后下载亚洲版英文ROM。刷了以后，中文都可以看。中文输入法包括拼音、注音、仓吉等。东南亚有很多华人，另外新加坡是唯一官方使用简体中文的国家，所以选择新加坡比较好。现在一切都正常，中英文都可以，只是系统菜单都是英文，对我来说没有问题。你在美国的话，我想可能还是恢复T-Mobile的美洲版英文。解决的方法一个是不要解锁，安装中文字库和输入法，例如网上流传的雅黑等。我已下载，如果找不到我设法传给你。但是我现在的办法是，先解锁成SPL-1.42.0000，如果不是而是SPL-1.42.***也不行。有软件可以改的。如需要我可以把我用过成功的传给你。解成SPL-2.08后，T版和非T版都可以刷ROM了。我的刷完之后，并没有重新锁上，而还是保持在SPL-2.08。我的经验如此。英文我可以看，但是像这长篇大论我是写不出来的。
Click to expand...
Click to collapse
Hi there and welcome to Xda-Developers.
Per the xda forum rules, it is only allowed to post in English:
4. Use the English language.
We understand that with all the different nationalities not everyone speaks English well, but please try. If you're really unable to post in English use an online translator, You're free to include your original message in your own language below the English translation.
Click to expand...
Click to collapse
Please provide a translation for your post or else your post will have to be removed.
TRANSLATION
您好，欢迎的Xda开发人员。
每次论坛的Xda规则，只允许发布英语：
4。使用英语。
据我们所知，所有不同国籍不是每个人都讲英语，但请尝试。如果你真的无法张贴在英国使用在线翻译，你是自由的，包括你在你下面的英文翻译自己的语言的原始邮件。
Click to expand...
Click to collapse
请为您的文章提供了一个翻译，否则您的帖子将被删除。
留言翻译与Google翻译
yanrunmei25 said:
I have no Idea for now, except ship it back to HTC repair
Click to expand...
Click to collapse
You can send back to your HTC service center, and you have to pay for changing mainboard of the HTC HD2. But I think you still get a tmous back. So you have to unlock first using HSPL 2 or some tools. If you need I will send to you.
Now I got back my "dead brick", but it is a real HTC HD2 Asia version, and I download every thing from HTC Singapore using my new SN(new IMEI). I don't think they are real official version but directly downloaded from HTC official website.
dharvey4651 said:
Hi there and welcome to Xda-Developers.
Per the xda forum rules, it is only allowed to post in English:
Please provide a translation for your post or else your post will have to be removed.
TRANSLATION
您好，欢迎的Xda开发人员。
每次论坛的Xda规则，只允许发布英语：
请为您的文章提供了一个翻译，否则您的帖子将被删除。
留言翻译与Google翻译
Click to expand...
Click to collapse
I delete it but not allow, why? And I put a new reply, it's ok.
thanks tvman;
yeah, I hope they wont charge me any penny on that.
I know there are lots of people have Problem with the T-mobile HD2, if you have your story, please share here.
Yes, but I think my experince is not suitable to here. My Leo now becomes real HD2, I still flash the rom with Tmous official version for testing about one week. Everything is OK. I add Chinese fonts and IME. But I don't like so many useless application in mainland to take about 100M memory. Finally, I flashed a cooked rom in Chinese, no useless applications in it. I have to install my favorite applications and patches. I don't think flash rom frequently is good idea. We are not experts or enthusiasts but cellular users only. It's my opinion.
Hi There,
I have an HTC HD2 T-mobile USA. I was dumb enough to flash the "RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50. 07U_2.04.50_22_2_Ship" into my phone and now it is dead.
I read in some previous posts that I could try to SD-card-flash the stock ROM2.13 (under 4G card, changing extensions and renaming the file, entering the Bootloader, etc.).
I could not find a "stick" post with step-by-step instructions. For instance, I need to know more on how to access the Boot-loader on the HD2
Is there anybody out there that tried this method with success? Replies to previous post are unclear on that.
Thanks
K
its dead. the radio in the rom you flashed has destroyed it.
two options
warranty/repair shop
jtag
samsamuel said:
its dead. the radio in the rom you flashed has destroyed it.
two options
warranty/repair shop
jtag
Click to expand...
Click to collapse
Can you tell me more about the Jtag process? Is it possible for me to do on my own?
Please, advise.
Thank you
K.
Honestly, not to seem like a douche...but if you bricked your HD2 by flashing an incompatible ROM, after all of the warnings and such that are everywhere about the .51 radios, I think that JTAG'ing is a little out of your range of skill. It involves takeing your device completly apart, soldering 5-ish tiny wires to tiny pads, and then reflashing the original SPL to your motherboard...not an easy task by any means. I would phone up HTC or T-Mobile and see what they say about warranty/repair.
Before you send your phone away to HTC or try to get your phone company to replace it, try here:
http://forum.xda-developers.com/showthread.php?t=668347
My very first flash went badly, I think due to a bad usb cable, and this was my only way out.
If this works, you'll be stuck on the test rom, but it is fully functional and still can be customised just about as much as any cooked rom, with a little time and effort.
Best of luck!
I have original T-mobile hd2.I was have lastest wp7 and latest radio and hspl.I tried to install win mobile 6.5 as restart and volume down installed as usb after complete it was showing bootloader hspl.restarted many times but same result.i tried to install older hspl and older radio Leo_RADIO_15.26.50.07U_2.04.50_22_2
now its black.when connect device it ask for qualcomm drivers and windows mobile device cant recognize it.so searched here for drives and found samsung qualcomm cdma drivers.drivers successful but still not synce appeared.tried reame nbh file as leoimg.nbh and volume down.but there is all black on my hd2.only the qualcomm device connected which i seen on device manager.so any 1 can help me?please please please
from what i know that radio is way outdated. 2.15.50.....is a good radio that ive been using
If you can not get to the multicolor bootloader screen by holding down the volume down button wbile your HD2 is booting up then sorry to tell you, your HD2 is bricked. Only using JTAG and a RIFFBOX can save it. Or replacing the mainboard will save it.
Sorry I just reread your post you installed radio version 2.04.50.22 to your HD2. This and any radio version 2.05.50.xx were the radio ersions used in the test tom's for the TMOUS HD2 but were still used in regular HD2's so any of the radio version 2.04.50.xx or 2.05.50.xx will brick a TMOUS HD2 just like any radio version x.xx.51.xx. Sorry bit I know for sure .ow your HD2 is bricked and like I said JTAG or replace your mainboard is the only way to revive it.
T-Macgnolia said:
If you can not get to the multicolor bootloader screen by holding down the volume down button wbile your HD2 is booting up then sorry to tell you, your HD2 is bricked. Only using JTAG and a RIFFBOX can save it. Or replacing the mainboard will save it.
Click to expand...
Click to collapse
but through usb its detecting device as qualcomm cdma or something like that.ok i am also an engineer.hd2 jteg method need any device or just cable carefully and put at place.or need some more tools?
yousufshah said:
but through usb its detecting device as qualcomm cdma or something like that.ok i am also an engineer.hd2 jteg method need any device or just cable carefully and put at place.or need some more tools?
Click to expand...
Click to collapse
First off reread my first post as I edited it. Secound you will need a HTC HD2 JTAG make sure you get tbd solderless one, and a RIFFBOX to connect to the JTAG. You will need the cables to connect the RIFFBOX to the JTAG and to your computer. You will also need a smal hex head screwdriver to take your HD2 apart with. You will have to google to find the software you need or it might come with the RIFFBOX i do not know as I have never done it and I only know the tools you need to do it. Best of luck friend.
T-Macgnolia said:
First off reread my first post as I edited it. Secound you will need a HTC HD2 JTAG make sure you get tbd solderless one, and a RIFFBOX to connect to the JTAG. You will need the cables to connect the RIFFBOX to the JTAG and to your computer. You will also need a smal hex head screwdriver to take your HD2 apart with. You will have to google to find the software you need or it might come with the RIFFBOX i do not know as I have never done it and I only know the tools you need to do it. Best of luck friend.
Click to expand...
Click to collapse
too bad for me bc i dont live at USA.I live at pakistan and here is not htc and t mobile support.and theses tools.bull ****.and currently exams running.**** **** ****.well thanks Macgnolia.do u know here who did that method and can help me?
I also forgot to mention that there is some great videos on Youtube showing how to do yhe whole JTAG procedure. Just type in something like how to use JTAG on HTC HD2.
here http://forum.xda-developers.com/showthread.php?t=668347
is one sloution for me i think
yousufshah said:
too bad for me bc i dont live at USA.I live at pakistan and here is not htc and t mobile support.and theses tools.bull ****.and currently exams running.**** **** ****.well thanks Macgnolia.do u know here who did that method and can help me?
Click to expand...
Click to collapse
You can order the JTAG and RIFFBOX online. here is a link to a site that has them, but I wdjibouti you the RIFFBOX will cost you.
http://www.multi-com.pl/index.php/en_US,details,id_pr,7912,menu_mode,categories.html
Tht link will take you straight to the JTAG but look around some on that site and you will find a RIFFBOX with all the cables included.
Also there is a couple of members here on XDA that can do this for you if you are willing to pay shipping and handling to send them your HD2 plus a small fee for them of course. But it is still cheaper than buying it yourself. Here are two threads you can check out.
http://forum.xda-developers.com/showthread.php?t=743331
http://forum.xda-developers.com/showthread.php?t=987320
yousufshah said:
here http://forum.xda-developers.com/showthread.php?t=668347
is one sloution for me i think
Click to expand...
Click to collapse
No this will not work for you as you have a truly bricked HD2 and can not get to boorloader. A lot of people here have a missconception about what a bricked HD2 is. If you can not get to bootloader you have a bricked HD2,if you can still get to bootloader then the HD2 is not bricked. What that thread is talking about is not a truly bricked HD2, it is a HD2 that either bas a noncompatible ROM are bad a bad ROM flash.Trust me trying the steps in that thread will do you no good.