Related
Hello,
Is it possible to overclock and underclock the galaxy note without custom kernel?
I have root but standart kernel.
Thanks for the help
regards
Sent from my GT-N7000 using xda premium
gofwar said:
Hello,
Is it possible to overclock the galaxy note without custom kernel?
I have root but standart kernel.
Thanks for the help
Best regard
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes you can use Tegrak Overclock (Ultimate) from the market, works on stock kernels
But be very carefull with your voltages, you are warned!
Do you maybe have good settings for the program?
is it possible to underclock to?
Can i leave the voltage standart and only set the cpu to 1.5 or 1.6
Thank you
Sent from my GT-N7000 using xda premium
gofwar said:
Do you maybe have good settings for the program?
is it possible to underclock to?
Thank you
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You might want to look in the kernel threads (FM kernel, Abyss, etc) in development, there is enough info concerning your question, and yes you can underclock with tegrak.
With tegrak you can use any cpu speed you want, is not fixed to a few settings.
I don't recommend overclocking
cpt_shawky said:
I don't recommend overclocking
Click to expand...
Click to collapse
I think i wait with overclocking, its fast enough but sometimes its fun to tweak, but its to mutch risk i think, so after i downloaded the app and set it to 1.5, i did set it to default via the app and removed it
Sent from my GT-N7000 using xda premium
One useful thing to do is underclock and undervolt. This phone works perfectl in 1.0ghz with -50 voltage on all clocks and a maximum of 500mnz with screen off, and itll save u a lot of battery.
Sent from my PocketDock
gee2012 said:
Yes you can use Tegrak Overclock (Ultimate) from the market, works on stock kernels
But be very carefull with your voltages, you are warned!
Click to expand...
Click to collapse
I didn't know you could overclock on stock kernal, thanks for that.
I have installed Tegrak and am run at 1.5Ghz from now on. If I notice any issues at all I will report back.
cpt_shawky said:
I don't recommend overclocking
Click to expand...
Click to collapse
Why not?
Sent from my Galaxy Note using xda premium
AdzUK said:
I didn't know you could overclock on stock kernal, thanks for that.
I have installed Tegrak and am run at 1.5Ghz from now on. If I notice any issues at all I will report back.
Click to expand...
Click to collapse
What voltage are you using?
i want to overclock but when i read the message be carefull with the voltage it scared me a bit, dont want to destroy it so fast haha.
is it faster on 1.5 or almost not?
@viamonte: do you mean underclocking the slowest cpu speed when it is in deep sleep?
Sent from my GT-N7000 using xda premium
gofwar said:
What voltage are you using?
i want to overclock but when i read the message be carefull with the voltage it scared me a bit, dont want to destroy it so fast haha.
is it faster on 1.5 or almost not?
@viamonte: do you mean underclocking the slowest cpu speed when it is in deep sleep?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I've not touched the voltage. If my s2 could handle 1.5ghz I'm sure the Note will be just fine.
Why would you want to overclock the fastest phone ever available?
Yuretsz said:
Why would you want to overclock the fastest phone ever available?
Click to expand...
Click to collapse
Why not? Its never fast enough haha.
I have mine now on standart 1.4, when i think its to slow then i wil overclock it to 1.6 or flash a custom rom and overclock it to 1.7.
Does somebody now what the speed is from the gpu?
Sent from my GT-N7000 using xda premium
i've set my cpu to 1.6 and didn't touch the voltages, i left it at 1250mv and 1100mv for core and internal voltages respectively. been on this setting for 2 days now and i haven't had any problems so far. but i was wondering with that cpu frequency is it possible to undervolt?
Yuretsz said:
Why would you want to overclock the fastest phone ever available?
Click to expand...
Click to collapse
Because you can?
Why wouldn't you?
My PC is a 2.66Ghz which has been running at 4.0Ghz since day 1. Like I said, if more power is available at no risk, and absolutely no extra cost, then the question isn't why, the question is WHY NOT?
AdzUK said:
Because you can?
Why wouldn't you?
My PC is a 2.66Ghz which has been running at 4.0Ghz since day 1. Like I said, if more power is available at no risk, and absolutely no extra cost, then the question isn't why, the question is WHY NOT?
Click to expand...
Click to collapse
True! My PC is a Core i7 2600k 3.4GHz which has has been overclocked to 4.7GHz.
Why? Because you can as you said! It's simply to make an insanely fast product run even faster!!
Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today
Hellou.. i have a question..
I am searching for daily use rom..that has everything worling perfectly.. so with no bugs.
Which one you recomend?
Thanks a lot!!
sent from my HTC - jic.
I am also searching for some guide how to instal cuatom rom.. because i havent found one.
Phone is not rooted and still with android 2.1 eclair..
I have never done anything on samsung's phones.. so i need some help.
And thaaanks a lot!!
sent from my HTC - jic.
papaver said:
I am also searching for some guide how to instal cuatom rom.. because i havent found one.
Phone is not rooted and still with android 2.1 eclair..
I have never done anything on samsung's phones.. so i need some help.
And thaaanks a lot!!
sent from my HTC - jic.
Click to expand...
Click to collapse
Galaxy 3 has officially froyo upgrade but we have cm7/Gb and now cm10 developed by marcell;but it has some bug like camera and video recording but these are stable and daily usable rom.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Rom and kernel list for galaxy 3:-
http://forum.xda-developers.com/showthread.php?t=1234591
Sent from my GT-I5800 using xda premium
Hello.. thank you very much!
sent from my HTC - jic.
I am using kyrillos v9.6 overclocked to 1ghz. It is fast and stable and everything works
Sent from my GT-I5800 using xda app-developers app
schnelle said:
I am using kyrillos v9.6 overclocked to 1ghz. It is fast and stable and everything works
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Thanks..
sent from my HTC - jic.
I'm also on Kyrillos v9.6 JPU OC for daily use. I can totally recommend it, everything works fine, no crashes or strange behaviour whatsoever.
sfand said:
I'm also on Kyrillos v9.6 JPU OC for daily use. I can totally recommend it, everything works fine, no crashes or strange behaviour whatsoever.
Click to expand...
Click to collapse
Thank you..
So i think this will be the one )))
sent from my HTC - jic.
papaver said:
Thank you..
So i think this will be the one )))
sent from my HTC - jic.
Click to expand...
Click to collapse
Don't forget to install setcpu after flashing the rom. My recommendations:
Min 200mhz max 600 for great battery life but slow phone
Min 200 or 300mhz max 800 for average performance
Min 300mhz max 1ghz for good performance and so-so battery life
My phone works stable even on 1.1 and 1.2 ghz but then I get big battery drain.
Another tip: default phone dialer is very slow/laggy. I use exDialer from playstore instead
Sent from my GT-I5800 using xda app-developers app
schnelle said:
Don't forget to install setcpu after flashing the rom. My recommendations:
Min 200mhz max 600 for great battery life but slow phone
Min 200 or 300mhz max 800 for average performance
Min 300mhz max 1ghz for good performance and so-so battery life
My phone works stable even on 1.1 and 1.2 ghz but then I get big battery drain.
Another tip: default phone dialer is very slow/laggy. I use exDialer from playstore instead
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Thanks for advice.
sent from my HTC - jic.
about overclock
iv tried overclock my phone to 1ghz but im kind coward to do it, whats the worst that could happend if you do it?
lfpaulinp said:
iv tried overclock my phone to 1ghz but im kind coward to do it, whats the worst that could happend if you do it?
Click to expand...
Click to collapse
Battery will drain faster, phone will be warmer. Some CPU's can't handle 1GHz so your phone may lag and you will have to change to a non-oc kernel.
Sent from my GT-I5800 using xda app-developers app
For me purumod3.0 is too good
It is non overclocked... simply fast ..no lags... battery charging lasts for >36 hrs depends on ur usage.... impresses with his work(jason)
Sent from my GT-I5800 using xda premium
Thanks for your feedback!, Ive found the best setup!
Higher my friend.
Sent from my R800i using xda app-developers app
JunDavis said:
Higher my friend.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Herro there
So what set cpu setup u rocking?
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thanks man, ill try your set up out after my xplay has charged and will post results later of how smooth it is with mc4 and some other games like rr3
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Pizza_Dox said:
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Click to expand...
Click to collapse
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Sorry man for the mistake
I will try to read better next time,
I am currently using Doom Kernel so i don't have the darkside governor.
I will try the lupus Kernel maby tomorrow as i need my phone for social purposes right now,
OMG!!!
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Awesome stuff man.
I decided to install Lupus Kernel (720p) and I failed so many times because ADB wasn't detecting my phone in fastboot and reason is because i use a mini usb hub (it connects into 1 hub and makes 5 hubs) so adb and fastboot dident have direct conntact with my phone and today i had a strange feeling and pluged it in to main usb port on my pc and it worked like a charm,i flashed lupus and i am enjoying it.
I think it is considerably faster that Doomkernel and smoother AND reliable,i used to get random force closes every now and then but now its super smooth and Touch screen response seems to be 100x better,
I also tried out your setup and shadowgun,Dead trigger(ULTRA GFX setting) and MC4 runs smooth at around 50 FPS
Glad I could help!
Sent from my R800i using xda app-developers app
Lupus ICS+GB Or Just Normal GB
Im Currently seeing what i can get the most speed out of what is better and does zram help with gaming
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Pizza_Dox said:
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Yes, it is true
Hello. I have question. What is the best rom for my defy? I have: CM 7.2 ; Android Gingerbread 2.3.7 and overclocked cpu from 800 mhz to 1100 mhz. Some games have lags, but in csr racing when i play hmm maybe 2 minutes maybe 3 i have no lags in race but in menu still have lags!? My friend told me best android is GB 2.3.4 stock, but i can't find this andoid, and i can't install :/ i'm beginner in android systems. Please help me with choose stable and smooth system for my defy . Oh i use Set CPU (not Set Vsel (****, more lags, cpu still change speed)) and sysctl config. I can wait for your ideas
DjEvill said:
Hello. I have question. What is the best rom for my defy? I have: CM 7.2 ; Android Gingerbread 2.3.7 and overclocked cpu from 800 mhz to 1100 mhz. Some games have lags, but in csr racing when i play hmm maybe 2 minutes maybe 3 i have no lags in race but in menu still have lags!? My friend told me best android is GB 2.3.4 stock, but i can't find this andoid, and i can't install :/ i'm beginner in android systems. Please help me with choose stable and smooth system for my defy . Oh i use Set CPU (not Set Vsel (****, more lags, cpu still change speed)) and sysctl config. I can wait for your ideas
Click to expand...
Click to collapse
I played games with this option:
latest CM7 Euroskank Gingerbread+1.15Ghz Overclock+LMK Set by Autokiller Memory optimizer(extreme)+removed useless system apps
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
runeupo said:
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
What is the taki_jeden rom? Oh i see it's JB . But it's only spain language?
taki_jeden rom is in Polish and in English
Sent from my MB526 using xda app-developers app
runeupo said:
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Lol
Rom has a lot of bugs mate
Xperia d 4.1 is best for gaming
I played almost every hd game in it
Sent from my MB526 using xda premium
Rawwr said:
Lol
Rom has a lot of bugs mate
Xperia d 4.1 is best for gaming
I played almost every hd game in it
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
perhaps some of the common jb bugs, though in my daily use i don't experience bugs, only 2 or 3 fc's when updating in playstore, but that's playstore or my undervolting (57/1100)
other than that, to use your own words in development: "smooth and stable"
don't know about gaming though.
Sent from my MB526 using xda app-developers app