Hey,
Probably this is a noob question, but I´ve searched around xda and google and got a lot of different oppininons and solutions, including another kdz files, so I´m creating this thread.
I´ve got V10K Europe Open Firmware on L7, and, when I try to update to v20a (all drivers installed, everthing working), I got WParam 100 and LParam 4010, and the phones gets on Emergency Mode, so I have to flash v10k again. I heard that I need to pre-flash a diferrent v10k firmware to flash new v20a, and there´s two versions of v20a, so I got confused...
Related
I have an L7 P705 with CM 10 installed above V20A.
After installing CM, I found out that it does not work well with V20A, So I attempted flashing V10k and some other KDZ files, they all give me the same error: Upgrade error Wparam:100 Lparam:6.
I have tried looking up the error, all search results linked to bricked phones, my phone is not bricked.
Edit: RESOLVED, I downloaded the v10 baseband zip and installed it with clockworkmod.
Hello guys,
How can I install a full stock ROM (V10K or V20A) on the P700? I have to send it to LG (under warranty), so I can't have CWM Recovery, Custom ROM, etc...
How can I do this? Thanks.
Hi.
You should flash your stock firmware, and then you'll be as good as new.
You can download your stock firmware from this link.
Then you can flash it with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
When you'll run it, make sure to select CDMA / 3GQCT in the type according to your cellular network (CDMA for CDMA and 3GQCT for GSM / UMTS).
If you don't have MSXML installed, run the msxml.msi file before running LG_KDZ-Flasher.exe file.
Good luck!
Or download LG support tool and install.
http://www.lg.com/uk/support-mobile/lg-LGP700#software
Is it flashing the stock firmware even when it's detecting another OS or a rooted phone?
Is it the same as Software update [KDZ] (KDZ-Flasher)?
If so, I'm really wondering why is this solution less familiar than Software update [KDZ].
Hi all,
I have D802 International 16GB device and D802TR V20C stock rom installed.
In order to install Germany or Open Europe V20H firmware;
* I installed LG drivers : LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2
* I downloaded V20H Kdz file and Lg Flash Tool 2014
* Switch to download mode
Everytime I stack on %2 of process and fail. I tried different combinations with different KDZ file but result is same.
I did not understand what is the problem. (win7 64 Enterprice)
Also I tried on another computer but result is same. (win7 x86 Ultimate)
Can anyone help me please?
Thanks.
You want get rid of root? Or why are you trying to flash stock if you are on stock?
Try this http://forum.xda-developers.com/lg-g2/help/fix-trouble-putting-download-mode-t2979318
hsahin4 said:
Hi all,
I have D802 International 16GB device and D802TR V20C stock rom installed.
In order to install Germany or Open Europe V20H firmware;
* I installed LG drivers : LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2
* I downloaded V20H Kdz file and Lg Flash Tool 2014
* Switch to download mode
Everytime I stack on %2 of process and fail. I tried different combinations with different KDZ file but result is same.
I did not understand what is the problem. (win7 64 Enterprice)
Also I tried on another computer but result is same. (win7 x86 Ultimate)
Can anyone help me please?
Thanks.
Click to expand...
Click to collapse
Dude, try looking for methods on how to do a hard-reset on your device. That would be the first thing you should be looking for.
Sent from my LG-E425g using XDA Free mobile app
I deeply searched into google / XDA and Turkey forums and found an information : You can not install any kind of stock rom which is different than original onto 311K models.
Finally I found a way that is work
I tried TOT method but does not work (different model error) and then I decide to try a different way that never tried before
* I have V20C Turkey Stock rom. (laggy and buggy )
* Rooted and installed TWRP
* Download CloudyFlex custom rom. Opened the zip file and deleted all things under "system"
* I extracted Germany 20H KDZ file (system.img) and copied all things into system folder into CouldyFlex zip file.
* Now I have cloudyflex.zip which includes system folder from V20H (Germany Open firmware 16GB)
* Installed zip file from TWRP. Now my device's LG D802. (was D802TR)
* I use the TOT method and installed V10A firmware (tellcon)
* Then I tried Lg Flash Tool 2014 way - finally it is OK. Now I have stock rom V20H Germany Open.
I had the same issue after flashing Cloudyg2 3.1. When I tried to go back to stock flash tool stopped at %2 and no flashing was possible. Thanks God I had TWRP. My solution was to flash the flashable zip stock rom I downloaded from the below link. After installation I was able to use KDZ method again with no error.
Link:
http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383
turquoise.ht said:
I had the same issue after flashing Cloudyg2 3.1. When I tried to go back to stock flash tool stopped at %2 and no flashing was possible. Thanks God I had TWRP. My solution was to flash the flashable zip stock rom I downloaded from the below link. After installation I was able to use KDZ method again with no error.
Link:
http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383
Click to expand...
Click to collapse
My Lg g3 F400k brick and flash the 400k20c.kdz and stuck at 2% pls help
Read this topic.http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
yerob said:
My Lg g3 F400k brick and flash the 400k20c.kdz and stuck at 2% pls help
Click to expand...
Click to collapse
hi
This is a g2 thread. You might wanna post it on g3 thread instead.
Here's my situation.
I have a D802.
I flashed the D802T kdz file (D802T20D.kdz) using LGFlashTool which is the LTE version of my Phone in Australia. Worked perfectly to my surprise.
Found out that kdz file was NOT for my phones model.
Now I want to flash the CORRECT firmware for my device (D80220C.kdz) which is for D802, but can't seem to get past 2%.
I don't understand, I did this method last week and now it's not working..
Any help possible? Is it because I am technically downgrading my firmware?
NOTE: Drivers are working, COM port is detected, Phone can communicate with PC in Download Mode.
"MODEL DLL Event : (100, 51)" and "Step : TYPE_WPARAM_UPGRADE_ERROR" seem very suspicious.
d00lz said:
Here's my situation.
I have a D802.
I flashed the D802T kdz file (D802T20D.kdz) using LGFlashTool which is the LTE version of my Phone in Australia. Worked perfectly.
Found out that kdz file was NOT for my phones model.
Now I want to flash the CORRECT firmware for my device (D80220C.kdz) which is for D802, but can't seem to get past 2%.
I don't understand, I did this method last week and now it's not working..
Any help possible? Is it because I am technically downgrading my firmware?
NOTE: Drivers are working, COM port is detected, Phone can communicate with PC in Download Mode.
"MODEL DLL Event : (100, 51)"
and
"Step : TYPE_WPARAM_UPGRADE_ERROR" seems very suspicious.
Click to expand...
Click to collapse
Never used this Flash Tool before but have never had an issue with the stock LG version from the same thread but lower down page where it says...
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download
...maybe it would work better but IDK exactly. Guess I'm just throwing in my 2 cents! Hope you get this ironed out!
http://forum.xda-developers.com/showthread.php?t=2432476
Pseudo_Soldier said:
<! -- Omitted for brevity -- !>
Click to expand...
Click to collapse
Thank you but that won't work. .TOT files don't exist for the D802 variant (as far as I know).
I need someone to confirm something for me.
Is it possible to Flash a D802T firmware onto a D802 device (if both reside in Australia)?. Because that's what I have seemed to have done with no errors, yet I'm finding forum posts stating that if you do flash the D802T onto an Australian D802 device you'll get problems.
How can i restore null IMEI after to flash Cloudy g2 3.3 from Cloudy g2 2.2 via TWRP?.
I explain you:
I had installed cloudy g2 2.2, and i tried to flash via twrp the cloudy g2 3.3 (LP) rom, but when the instalation finished, the phone became black screen and appears in the PC many many partitions. (Tipical error Qualcom), then i fix this problem with SKR Tool and all works fine. After via download i flashed with LG FLash Tool a TOT file (orange) 10a, and d805 dll, but when flash finished (with sync error in 94%) and start to welcome and configuration screen, the phone is continuously restarted every 2 minutes and i not have signal.
Then with LG FlashTool 2014 i flashed a 20A ROM from my original brand (Claro) and works fine, without restarts but still no signal and not recognize MTP conecction to PC. (Problems of driver to recognize MTP connection)
When i digit *#06# says IMEI null, and that seem that imei is corrupt (not lose), but is very strange because when i flashed the tot with LG Flash Tool, in the LOG show the IMEI correcly.
I dont have a EFS Backup.
What can i to do?
Exist any method to recover the signal?, maybe flashing basebands?
I hope can you help me
Thanks you!!
well your problem sees to be very strange, once i had a similar issue, first time i bought my g2 i tried to install a cloudyg2 2.1 rom but i ended in fastboot mode, then i try to flash the rom again and it worked but i was getting that same error imei null and baseband unknown, i didn't have an EFS backup so i tought everything was lost, solution for me was easy, i flashed a kdz 20g for my d801 t-mobile and my imei and baseband were working again, maybe you should try reinstall using TOT method, or flash other different kdz for your moddel, sorry for my bad english and regards
Thanks!, i tried to install a 20A kdz, and 10A vi TOT, and cannot recover my signal and imei null, also install cloudy g2 2.2 again, and works fine except for IMEI signal.
I dont know how can fix it