Here's my situation.
I have a D802.
I flashed the D802T kdz file (D802T20D.kdz) using LGFlashTool which is the LTE version of my Phone in Australia. Worked perfectly to my surprise.
Found out that kdz file was NOT for my phones model.
Now I want to flash the CORRECT firmware for my device (D80220C.kdz) which is for D802, but can't seem to get past 2%.
I don't understand, I did this method last week and now it's not working..
Any help possible? Is it because I am technically downgrading my firmware?
NOTE: Drivers are working, COM port is detected, Phone can communicate with PC in Download Mode.
"MODEL DLL Event : (100, 51)" and "Step : TYPE_WPARAM_UPGRADE_ERROR" seem very suspicious.
d00lz said:
Here's my situation.
I have a D802.
I flashed the D802T kdz file (D802T20D.kdz) using LGFlashTool which is the LTE version of my Phone in Australia. Worked perfectly.
Found out that kdz file was NOT for my phones model.
Now I want to flash the CORRECT firmware for my device (D80220C.kdz) which is for D802, but can't seem to get past 2%.
I don't understand, I did this method last week and now it's not working..
Any help possible? Is it because I am technically downgrading my firmware?
NOTE: Drivers are working, COM port is detected, Phone can communicate with PC in Download Mode.
"MODEL DLL Event : (100, 51)"
and
"Step : TYPE_WPARAM_UPGRADE_ERROR" seems very suspicious.
Click to expand...
Click to collapse
Never used this Flash Tool before but have never had an issue with the stock LG version from the same thread but lower down page where it says...
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download
...maybe it would work better but IDK exactly. Guess I'm just throwing in my 2 cents! Hope you get this ironed out!
http://forum.xda-developers.com/showthread.php?t=2432476
Pseudo_Soldier said:
<! -- Omitted for brevity -- !>
Click to expand...
Click to collapse
Thank you but that won't work. .TOT files don't exist for the D802 variant (as far as I know).
I need someone to confirm something for me.
Is it possible to Flash a D802T firmware onto a D802 device (if both reside in Australia)?. Because that's what I have seemed to have done with no errors, yet I'm finding forum posts stating that if you do flash the D802T onto an Australian D802 device you'll get problems.
Related
Folks,
I gave my rooted (mahdi rom) ATT G2 to my teenage son seeing I was no longer using it. He said he tried to update the Mahdi ROM and now it is bricked. From my questioning him all I know is when he was installing the mahdi update, but he did not flash the D800 patch. Noticing there was a problem I think he tried to re-flash recovery or something. All he would get is "fastboot mode".
I think I am a pretty smart guy and have been on XDA for years flashing and what not with no issues - but this one has me stumped. These are the steps I have taken:
1) Finally got it into download mode and when I try to flash the tot file for ATT, it says incorrect model. Says the model is the D801 (t-mobile)! I was like what?
2) So I tried to flash the D801 tot and it seemed to work, but the flash would ultimately "Fail" in the LG Flash Tool. It would boot up into the t-mobile rom but I would get errors and reboots - very unstable. AND the IMEI was wiped!
Does anyone have any ideas what I can try next? I would like to somehow change the model back to the D800 and flash the ATT tot file. Maybe it is truly just bricked!?!?
Any help would appreciated! Thanks!
madgalaxy said:
Folks,
I gave my rooted (mahdi rom) ATT G2 to my teenage son seeing I was no longer using it. He said he tried to update the Mahdi ROM and now it is bricked. From my questioning him all I know is when he was installing the mahdi update, but he did not flash the D800 patch. Noticing there was a problem I think he tried to re-flash recovery or something. All he would get is "fastboot mode".
I think I am a pretty smart guy and have been on XDA for years flashing and what not with no issues - but this one has me stumped. These are the steps I have taken:
1) Finally got it into download mode and when I try to flash the tot file for ATT, it says incorrect model. Says the model is the D801 (t-mobile)! I was like what?
2) So I tried to flash the D801 tot and it seemed to work, but the flash would ultimately "Fail" in the LG Flash Tool. It would boot up into the t-mobile rom but I would get errors and reboots - very unstable. AND the IMEI was wiped!
Does anyone have any ideas what I can try next? I would like to somehow change the model back to the D800 and flash the ATT tot file. Maybe it is truly just bricked!?!?
Any help would appreciated! Thanks!
Click to expand...
Click to collapse
if you can successfully root device with towelroot(best choice since it is not device specific) then your best bet is to copy d800 build.prop(or to play it safe edit the build.prop model number from LG-D801 to LG-D800) into system/ give it rw-r--r-- pemissions and reboot into download mode, it should say you have d800 and you should be able to flash back to d800 tot(might want to be using d800 dll that ignores model check too just in case)
Hi all,
I have D802 International 16GB device and D802TR V20C stock rom installed.
In order to install Germany or Open Europe V20H firmware;
* I installed LG drivers : LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2
* I downloaded V20H Kdz file and Lg Flash Tool 2014
* Switch to download mode
Everytime I stack on %2 of process and fail. I tried different combinations with different KDZ file but result is same.
I did not understand what is the problem. (win7 64 Enterprice)
Also I tried on another computer but result is same. (win7 x86 Ultimate)
Can anyone help me please?
Thanks.
You want get rid of root? Or why are you trying to flash stock if you are on stock?
Try this http://forum.xda-developers.com/lg-g2/help/fix-trouble-putting-download-mode-t2979318
hsahin4 said:
Hi all,
I have D802 International 16GB device and D802TR V20C stock rom installed.
In order to install Germany or Open Europe V20H firmware;
* I installed LG drivers : LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2
* I downloaded V20H Kdz file and Lg Flash Tool 2014
* Switch to download mode
Everytime I stack on %2 of process and fail. I tried different combinations with different KDZ file but result is same.
I did not understand what is the problem. (win7 64 Enterprice)
Also I tried on another computer but result is same. (win7 x86 Ultimate)
Can anyone help me please?
Thanks.
Click to expand...
Click to collapse
Dude, try looking for methods on how to do a hard-reset on your device. That would be the first thing you should be looking for.
Sent from my LG-E425g using XDA Free mobile app
I deeply searched into google / XDA and Turkey forums and found an information : You can not install any kind of stock rom which is different than original onto 311K models.
Finally I found a way that is work
I tried TOT method but does not work (different model error) and then I decide to try a different way that never tried before
* I have V20C Turkey Stock rom. (laggy and buggy )
* Rooted and installed TWRP
* Download CloudyFlex custom rom. Opened the zip file and deleted all things under "system"
* I extracted Germany 20H KDZ file (system.img) and copied all things into system folder into CouldyFlex zip file.
* Now I have cloudyflex.zip which includes system folder from V20H (Germany Open firmware 16GB)
* Installed zip file from TWRP. Now my device's LG D802. (was D802TR)
* I use the TOT method and installed V10A firmware (tellcon)
* Then I tried Lg Flash Tool 2014 way - finally it is OK. Now I have stock rom V20H Germany Open.
I had the same issue after flashing Cloudyg2 3.1. When I tried to go back to stock flash tool stopped at %2 and no flashing was possible. Thanks God I had TWRP. My solution was to flash the flashable zip stock rom I downloaded from the below link. After installation I was able to use KDZ method again with no error.
Link:
http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383
turquoise.ht said:
I had the same issue after flashing Cloudyg2 3.1. When I tried to go back to stock flash tool stopped at %2 and no flashing was possible. Thanks God I had TWRP. My solution was to flash the flashable zip stock rom I downloaded from the below link. After installation I was able to use KDZ method again with no error.
Link:
http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383
Click to expand...
Click to collapse
My Lg g3 F400k brick and flash the 400k20c.kdz and stuck at 2% pls help
Read this topic.http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
yerob said:
My Lg g3 F400k brick and flash the 400k20c.kdz and stuck at 2% pls help
Click to expand...
Click to collapse
hi
This is a g2 thread. You might wanna post it on g3 thread instead.
I just bought a used lg g2. Guy had it unlocked and rooted and used Cyanogen mod for a d801, he used it on metro pcs. He said it was att phone. I verified by disassembling and check the MOBO. The imei also matches a d800. However when trying to return to stock on LG flash tools, I get an error saying device model is different. LG flash tools says its a d801 and im trying to install a d800 file. Anyone have any ideas?
Its running team win recovery v2.7.0.0
and CM 12-20150225 nightly d801
should I flash a d800 rom from recovery and then use lg flash tools?
Have you tried flashing the 801 kdz file? I've seen another thread on here about this specific problem. http://forum.xda-developers.com/lg-g2/help/version-g2-t3042262
No I havent. Just stock d800 tot
Fixed!
Flashed stock as per super sports thread and used the dll file at the bottom of the first post.
Okay so before you start criticizing me for being a completely dumb-***
I am fully aware that I am. Glad we can pass this part.
Now for the real bullpucky,
I installed CloudyLG 3.0 on my D801 not knowing it was only for Korean Versions of the LG G2
I bricked my LG G2 D801, No Download Mode, No LG G2 logo, No recovery, just Fastboot
So I found a thread which helped me with, this problem but my dumb-*** wasn't think and half asleep
So I flashed the wrong files for my phone. Instead of using the D801 .img files, I used the D802 .img files.
I can see the LG G2 logo, Download mode and stock recovery but, where I am stuck is here
I tried flashing the stock rom using the kdz file but nothing is working. and yes my phone is showing up on my computer on COM4/41
Any means of help? or is my phone done for?
I am willing to work with anyone who can help
Extosis said:
Okay so before you start criticizing me for being a completely dumb-***
I am fully aware that I am. Glad we can pass this part.
Now for the real bullpucky,
I installed CloudyLG 3.0 on my D801 not knowing it was only for Korean Versions of the LG G2
I bricked my LG G2 D801, No Download Mode, No LG G2 logo, No recovery, just Fastboot
So I found a thread which helped me with, this problem but my dumb-*** wasn't think and half asleep
So I flashed the wrong files for my phone. Instead of using the D801 .img files, I used the D802 .img files.
I can see the LG G2 logo, Download mode and stock recovery but, where I am stuck is here
I tried flashing the stock rom using the kdz file but nothing is working. and yes my phone is showing up on my computer on COM4/41
Any means of help? or is my phone done for?
I am willing to work with anyone who can help
Click to expand...
Click to collapse
If you have a D801 T-Mobile you should be Returning to Stock using the TOT Method.
Visit the Return to Stock thread.
Scroll down a little and you will find the TOT Method.
Grab your TOT .zip & dll file from here.
Try the TOT method instead of the KDZ method.
d00lz said:
If you have a D801 T-Mobile you should be Returning to Stock using the TOT Method.
Visit the Return to Stock thread.
Scroll down a little and you will find the TOT Method.
Grab your TOT .zip & dll file from here.
Try the TOT method instead of the KDZ method.
Click to expand...
Click to collapse
I tried the TOT method, but since I flashed a ROM that wasn't compatible with my D801, my entire phone now is pointing as if is an F320S, it doesn't even say its D801 model.
When I tried to use the D801 TOT file with the correct .DLL it failed to do so because of the wrong TOT aka my phone saying it's an F320S model when it really isn't.
I'm downloading the F320S TOT file w/ the .DLL, hopefully this works.
Is there any alternatives for this? I would appreciate it! thanks for the reply
internal memory issue , i accidentally flashed a 16 gb stock rom on 32 gb lg g2
Please guys help.....
I got it to work.
You should get the d801 tot file, edit it with hex editor to the line 6010 by copying the line 6010 of f320 tot file save it, and then follow the guide to of going back to stock with lgflashtool with tot file, remember to get dll file that skips version checking, it worked for me, i did the same mistake.
Sent from my Nexus 4 using XDA Free mobile app
Thanks man. But I already fixed it with that method, I actually wrote one tut about it in general lg
Sent from my LG-D801 using XDA Free mobile app
Hello Guys,
I was wondering if you can help me out clarifing a few things about flashing roms in .kdz format.
So i was on Cloudy 2.2 and had a lot of issues and then i decided to revert to stock. I followed the hyelton thread and did the TOT method. Now i have the phone on 4.2.2 working fine. At this moment i want to upgrade to 4.4.2 or 5.0 but when i check for updates i get the information that i'm on the latest SO. So my questions are:
1. How can i force update to 4.2.2 or even 5.0 without rooting? I tried to find the TOT file of a lolipop rom to flash via tool but can't find any.
2. I tryed to flash a .kdz lolipop rom via LG Tool (i extracted the dll and DZ) but i get an previousLoad error... so any suggestions?
3. The last case i could go back on rooting and put a custom recovery and then put the lolipop, but to achieve this, from 4.2.2 wich steps should i follow?
I'm asking this here because i saw multiple threads and discussions but can't get the right ways to do what i want.
Thank you very much.
Cheers
Note: The version is d802, portugal.
Well guys, after much nerves and errors.. here are my conclusions
1. If you want to use Lg Flash tool and flash a stock rom with .kdz extension, you need to put the rom file in the tool folder then run the tool with admin prev. Then select the file and press cse flash. You'll get an error on connecting to servers probably (i got one). Ignore it, but DON'T click on nothing.. the process is still runing, so even with error, just wait... you'll see your phone doing some progress. After a while it will reboot and VOILA
2. About TOT file, i just went with the kdz method.
3. To get the right KDZ file use thiss repo: http://devtester.ro/projects/lg-firmwares/
then you can put your imei and get the rom or just find a rom that fits you.
4. To get the lattest Lg Tool go here: http://lgflashtool.com/
Notes:
. Keep in mind that the .kdz files are big (>1,6gb) so make sure the download is not interupted, use a download manager or firefox. If its corrupted you'll have problems.
. All the files and sites are not mine, i'm just mentioning them.
Now running stock lolipop with no prob.
Cheers