Hi. I think I bricked my phone...... All I get now is Black screen, nothing happens when I try to start the Bootloader , and also nothing happens when I try to start the hard reset (holding the volume + and power button) ... All i get is a black screen , my phone is recognized by the RTD Lite, I tried flashing stock software but I still get the same Black screen , and the thing is that I also get a white LED when i connect it to RTD Lite , after I finish my flashing ( I tried many stock softwares) the RTD says that the phone is rebooting but the screen just turns off and remains black , that's it..... I tried removing the battery and such, I have 2 batteries both of them are fully charged... I have all the drivers installed on my pc , I think that how this happened is I flashed by mistake a DEFY + stock soft... is there and hope ??
Thank you.
looperman said:
Hi. I think I bricked my phone...... All I get now is Black screen, nothing happens when I try to start the Bootloader , and also nothing happens when I try to start the hard reset (holding the volume + and power button) ... All i get is a black screen , my phone is recognized by the RTD Lite, I tried flashing stock software but I still get the same Black screen , and the thing is that I also get a white LED when i connect it to RTD Lite , after I finish my flashing ( I tried many stock softwares) the RTD says that the phone is rebooting but the screen just turns off and remains black , that's it..... I tried removing the battery and such, I have 2 batteries both of them are fully charged... I have all the drivers installed on my pc , I think that how this happened is I flashed by mistake a DEFY + stock soft... is there and hope ??
Thank you.
Click to expand...
Click to collapse
anyone???
Flash dfp 231 sbf. If stuck on Motorola logo wipe data from stock recovery
Sent from my MB526 using xda premium
thekguy said:
Flash dfp 231 sbf. If stuck on Motorola logo wipe data from stock recovery
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
where can I find this sbf ?
looperman said:
where can I find this sbf ?
Click to expand...
Click to collapse
I hope this helps http://forum.xda-developers.com/showthread.php?t=966537
Before I bricked my phone , I think I flashed a SBF for Defy+ ......
is there still any hope ?
Looks like you're trying to flash an sbf with a bootloader version lower than the one you had. Flash the DFP 231 CEE sbf as suggested above. That should work.
Root it and flash one of the custom kernel builds. Hope this helps.
Sent from my MB526 using xda premium
heip me
Hai guys, i am currently using defy+ mb 526 2.3.6. it is rooted but not installed cmw. it is stuck with logo M. its loading boot. suggest me some custom sbf stack to flash
Related
I flashed my defy to android 2.3.6 and after that because of some problem I flashed back to 2.3.4 (Im new user and I didnt know its not possible to downgrade) and then my defy never boot up and never go to recovery or boot menu .I have the full chartered battery ( I can charge battery directly with special charger like Mcgyver battery fix) but when i flashed my phone with rsd lite it never boot up and screen shows black pages always please help me ( what can i do?
Flash 2.3.6 full SBF again with RSDLite. Try before, if you can access the stock recovery, to do a wipe data wipe cache
Just wipe cache and factory reset u will skip boot loop
Sent from my MB525 using xda premium
Thanks for you reply but I had flashed to 2.3.6 before but nothing happened ,I cant access to recovery menu
when I press Power + up or down key it never goes to recovery or boot menu
Pull battery off for a while. Put it back. Hold volume- button and power on your phone. You should see android with exclamation mark.push both volume buttons at same time. Voila. You should be in stock recovery.
Sent from my MB526 using XDA App
unfortunately nothing was happened
amirhosein.r said:
unfortunately nothing was happened
Click to expand...
Click to collapse
when u flash 2.3.6 with RSDLite everything is ok ? u get some checksum errors ?
my cell phone is defy but finally I flashed with 2.3.6 defy+ and it works !
now wifi and gsm antenna are very weak
Try baseband switcher and set to your region properly. Being in the wrong baseband may give signal quality weak and consume additional battery resources.
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
sterver1 said:
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
Click to expand...
Click to collapse
see this http://forum.xda-developers.com/showthread.php?t=1150155 try to charge your battery fully. hope it works..
you tried in another PC o USB cable ?
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
sterver1 said:
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
Click to expand...
Click to collapse
Try to enter stock recovery ab do a factory reset
If your battery is really empty you can use ab old Nokia wallcharger out else ....... just figure out what is plus and what is minus....
Sent from my MB526 using xda app-developers app
Do you have the appropriate drivers installed on your pc for rsd? You have to be able to flash an sbf, a failed Cm update flash won't brick your Defy, it's much harder to brick it...
Sent from my MB525 using xda app-developers app
lexer98: Yes I tried it... It is same.
bone101: I can not enter to any recovery.
sa3e1: Yes, I have all drivers.
I try the other.
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
sa3e1 said:
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
When I do that, on screen show: Battery Low - Cannot program.
But all is OK because I bought universal charger and now I'm charing battery..:cyclops:
Next I flash correct SBF file via RSD Lite. Is it ok?
And the phone isn't charging when it's off?? I hope it will be ok after charging battery with external charger! Then go to stock bootloader and flash a stock sbf, or if you want to go straight to CM10 try Easy Recovery sbf:
http://forum.xda-developers.com/showthread.php?t=1787541
Sent from my MB525 using xda app-developers app
Done
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
sterver1 said:
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
Click to expand...
Click to collapse
Why 2?
Only 1 is enough
Also AICS that is older version of CM7…
Flash froyo and root it...
Install 2ndInit and using cwm install CM10
If you screw up...I am not responsible!
Sent from my MB525 using xda app-developers app
All is ok.... Now I'm using CM10.
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
andr0idfreak said:
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
Click to expand...
Click to collapse
The first SBF i put, there rom_froyo.sbf (original from motorola i think)
before i try to upgrade to CM10-20120904 i have kernel 2.3.4 and i think that the same "rom_froyo.sbf", because i made only one time Flash with RDSLite...
from first and unique flash with RDSLite, only i made update from recovery mode - install zip from sd
only put cm7, cm9 and cm10, then the Gapps... and the last time when upgrade to cm10 i made, install cm10.zip, install kernel 2.3.4, and install gapps...
Any idea about the firmware version?
andr0idfreak said:
Any idea about the firmware version of rom_froyo.sbf ?
Click to expand...
Click to collapse
i have no idea..
i think that is 2.2 from motorola
i get it from HTCMania
w w w. htcmania.com/showthread.php?t=219893
but now links are not valid...
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
andr0idfreak said:
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
Click to expand...
Click to collapse
I have normal defy, with red lense (bayer)
the principal problem now is that can not made nothing... only it put in white led when i connected to usb...(no combination (power+vol+ or power vpl-) made nothing)
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
andr0idfreak said:
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
Click to expand...
Click to collapse
I'm trying to charge the battery via USB cut,
red wire to positive and black to negative,
I'll leave loading an hour or more, and try again.
what "sbf" do you recommend that put in defy? BL6 or BL7 ...
Could you put the recommended "sbf" links?
thanks.
Charging on unregulated USB for an hour can kill your battery
Sent from my MB526
Moved to Q&A. Please post all questions there.
Sent from my HTC Glacier using xda premium
did you fix it?
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
ela1103 said:
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
Click to expand...
Click to collapse
What defy you have: red, green or plus? You cant install lower rom than 188. If you have plus - you'll have all things working, red - battery can make work with batt fixes, green - camera will never work on BL7, only on CM10,CM9.1 or other roms with custom kernel. You're stuck on BL7 so try flash 231 sbf. Read this post, you'll find more info: http://forum.xda-developers.com/showpost.php?p=12419400&postcount=3
Plz Help
gark81 said:
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Click to expand...
Click to collapse
Hi Frnd,
How you solve this problem, I have the same problem...
Plz, help me.... in Advnc Thanx......
Hi there,
I bricked my Defy Plus from CM10, 2ndInit. I've wanted to flash again the original .sbf cause of warranty issues. I wasn't sure witch version I had on the original so I thought I'll go from one to one in the list of droid developers SBF( can't create link )
After flashing with RSD light there was 2 possible outcome:
1. Flashing completed normally but after device rebooted, it hanged at the Motorola Logo infinetly.
2. Flashing completed, but the device turned off itself, and after trying to turn on, nothing was rendered, HOWEVER I've noticed, that it can be still booted into bootloader mode, cause I could see it listed in the RSD Lite device list.
I thought that was the worst case scenario, turns out its not:
After flashing DFP-137 device cannot be turned on, won't apper in RSD Lite, nothing.
A symptem is, that if connected the white led glows.
Is it possible I bricked it to such state, that I've got no options? If not, what should I do.
I think the cell got supply, cause I licked it, and felt normal ( electricity was riding trough my thoung ).
Any tipps are welcome, hit me!
Maybe it's low on battery, did you factory reset from stock recovery?
Sent from my MB525 using xda app-developers app
sa3e1 said:
Maybe it's low on battery, did you factory reset from stock recovery?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
No, I figured for removing rooted state, I should reflash the full .sbf.
As I said, it feels charged, mb I'll try go for McGuyver charing method.
If I can reanimte my Defy into bootloading state, how do I know witch .sbf is the correct one??
defy problem
Dear All,
I had flashed Motorola defy plus with kitkat a month ago. As it was getting hanged, i tried to switch it to stock rom but the RSD lite is giving error while flashing everytime.
i have tried many sbf but it diidnt worked out. kindly let me know the correct procedure and the SBF should i flash.
Now its showing Motorola logo only and doesnt move ahead neither i am unable to reach stock recovery.
i did it all by charging battery from universal charger as i cant even charge my battery.
I am in need of urgent help and didn't want let die my DEFY PLUS
Regards
Abhishek
Hello and happy holidays!
I have recently bought a Defy+ and i wanted to root after about 2 weeks of use mostly for removing some bloadware and killing ads and more thingies...
As you can guess from this thread title i freaking bricked it...
So let me tell you what i have done until now.
A)I followed this one
http://www.ozbargain.com.au/node/82806
so i can flash it because no program like SuperOneClick was working.
My baseband was somewhere in the mid of these 2 (something like 60 i can't recall anymore)
According to some posts there even another one with my baseband could follow the second procedure
(http://forum.xda-developers.com/showthread.php?t=1595013 ) and end up with a rooted defy+.
I flashed it and was the screen stayed black... Well at the time i could thing that this was bad... I flashed the other 2 and i was waiting in vain...
B) after this complete failure came the funny part... I DONT REMEMBER anything about my stock sbf :angel: ... Seriously it didnt cross my mind to write it down.
So i started trying to flash it with the Unbrick your Defy+ guides.
http://forum.xda-developers.com/showthread.php?t=1828639
Tried the site http://sbf.droid-developers.org/umts_jordanplus/list.php
i even tried this one http://forum.xda-developers.com/showthread.php?t=1820282 in case it had a good effect. Well it hadnt
Until now i am still in the company of a lovely black screen...
MY CONDITION NOW :
RSD 5.6 at first before B step went to 5.9.
1) Insert battery = black screen
2)Power button = black screen
3)Power button pressed with VOL + or - , insert battery = black screen!
4)My pc (win7) finds the phone + White Led
5)RSD detects it cause i can flash it. (about 10 times now...)
6)Phone can be charged (Thank you God)
7)Every single one sbf goes Finished- PASS...
Some more information.
- I am from Greece and the Rom used Greek(localization stuff)
- The Rom had Blur (God Damn it)
- Android was 2.3.6
/EDIT
-RSD report that i have Bootloader version v0x000910 on phone...
Android Play store reports my Defy+ as "Vodafone Motorola MB526". (Should i go for Vodafone singed packages?)
I have read almost any thread for the broken Defy+ but the real problem is that i can not recall my stock sbf
And the questions from here...
a) Is there a way to see my bootloader version while in this messed up state? (and does it even matter?)
b) If it was a Vodafone Blur there would some dinstict features i could have seen? ( so i can start flashing vodafone sbf again...)
c) http://sbf.droid-developers.org/umts_jordanplus/list.php has only full sfb right?
d) Suppose i had a v6 sfb,If i tried a higher sfb version wouldnt the phone worked?
e) I have tried all the http://sbf.droid-developers.org/umts_jordanplus/list.php that is Retail Central Europe (GR_SIGN) but i have failed should i tried them again?
-EDIT- (forgot questions after my chrome crashed)
f) Should i try all 2.3.6 Roms from http://forum.xda-developers.com/showthread.php?t=966537
g) DEFYPLUS_U3_4.5.x . This x does it play any role? If anything fails should i try the last chinese one(DFPRC_U_4.5.3) ?
I am sorry for the long post but i am a little at loss here...
Thank you for your time even if you have just read all this and dont know anything
Flash a sbf with the name dfp 231 (bl7)
Wipe data from stock recovery later and you should be good to go
Sent from my MB526 using xda premium
thekguy said:
Flash a sbf with the name dfp 231 (bl7)
Wipe data from stock recovery later and you should be good to go
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Well i tried about 6 sbf with dfp 231. From DEFYPLUS_U3_4.5.1-134_DFP-231_CN that is used for bl7 root (the first one that made the black screen my lovable partner) to British/retail CEE/unknown/ o2 / vodafone /german / nordic and nothing happened. All Finish /pass and all black screen + white led.
RSD report that i have Bootloader version v0x000910 on phone. I hope this can help in some way...
I decided to try all the 2.3.6 sbfs... let's see...
Hm...
i just flashed
DEFYPLUS_U3_4.5.1-134_DFP-312_TMOUK_SIGN_USADEFYEMARAB1B8TMDE011.0R_PDS03C_USAJRDNGIBRTMDE_P029_A033_M008_Service1FF
and phone stuck at reboot manually your phone. and now is dead. Cant connect to pc. nice...
You may have ran out of battery. If the dfp 231 flashing resulted in a black screen after a data wipe then you should try selecting the blank flash option. Also try a different cable. If still there's a problem then it'd reckon it's hardware failure
About the boot loader code, yeah it's fine but unfortunately is no help
Sent from my MB526 using xda premium
enigma9 said:
Hm...
i just flashed
DEFYPLUS_U3_4.5.1-134_DFP-312_TMOUK_SIGN_USADEFYEMARAB1B8TMDE011.0R_PDS03C_USAJRDNGIBRTMDE_P029_A033_M008_Service1FF
and phone stuck at reboot manually your phone. and now is dead. Cant connect to pc. nice...
Click to expand...
Click to collapse
if you dont fix it yet
charge your battery and put this sbf with RSDlite
http://dl.dropbox.com/u/43690836/An...gerbread_2.3.6_4.5.1-134_DFP-231_CEE_CGv7.zip
after you charge the battery check if rsd see your phone when is in OFFmode and flash the sbf in this way
THANK YOU for your time and your responses.
What do you mean blank flash? Its the first time i come across this term.
My speculations was also that i am out of battery so i ordered an external battery charger from ebay just to be sure.( i have seen the mcgyer way but i am afraid to do it cause everything are going south at the moment so just to be sure )
I have also came across the idea of the factory cable. From the threads here in xda there is a user who actually tried one on a defy (MB525) so i am thinking of ordering one of these.
NEW INFO. Android Play store reports my darling dead Defy+ as "Vodafone Motorola MB526". I think i should turn to Vodafone Blur singed packages. What do you think?
vaserbanix said:
if you dont fix it yet
charge your battery and put this sbf with RSDlite
http://dl.dropbox.com/u/43690836/An...gerbread_2.3.6_4.5.1-134_DFP-231_CEE_CGv7.zip
after you charge the battery check if rsd see your phone when is in OFFmode and flash the sbf in this way
Click to expand...
Click to collapse
I download your sbf as i write.
I have some problems with this damn battery. I left it all day plugged in at the pc but it doesnt want to charge. I will leave it for another day and i will go for the result tomorrow after some time in the wall charger.If all fail i will wait for the external wall charger i bought yesterday
enigma9 said:
THANK YOU for your time and your responses.
What do you mean blank flash? Its the first time i come across this term.
My speculations was also that i am out of battery so i ordered an external battery charger from ebay just to be sure.( i have seen the mcgyer way but i am afraid to do it cause everything are going south at the moment so just to be sure )
I have also came across the idea of the factory cable. From the threads here in xda there is a user who actually tried one on a defy (MB525) so i am thinking of ordering one of these.
NEW INFO. Android Play store reports my darling dead Defy+ as "Vodafone Motorola MB526". I think i should turn to Vodafone Blur singed packages. What do you think?
Click to expand...
Click to collapse
you say "blank flash"
ok, i tell phone in OFFmode wich mean phone is stop, out of function
usb cable you can check it with a MAVO device if is good or not
ps.for more succes try a pc with XP system or change the usb port
reinstall the drivers if the pc doesnt see the phone
I will change the usb and i ll reinstall the drivers.
Thank you for the info on the term!
I will wait for the power to charge and i will try again.
And btw, blank flash is to be selected from rsd file flash/flex options
Sent from my MB526 using xda premium
thekguy said:
And btw, blank flash is to be selected from rsd file flash/flex options
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
So i ll choose it before i flash.Ok i ll try it that too.
I am currently waiting my external battery wall charger and my factory cable from ebay.
I used the pc usb charge all night trick and nothing happened... :crying:
So i will wait to charge the battery by normal means and then if this also fails i will try for the factory cable.
Anyone has any thoughts on the factory cable?
Mcgyer trick is the factory cable, using which one can flash without battery
Sent from my MB526 using xda premium
thekguy said:
Mcgyer trick is the factory cable, using which one can flash without battery
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Wait.Factory cable loads directly the bootloader while Mcgwer trick just gives power to the phone.
And i think factory cable its safer when you use it because the phone is actually waits to be given a 5V supply in that pin and there is not a chance of frying anything,
I think... :S
Boot into bootloader "power+vol up"
If battery is down you will read
Battery down cannot progamn"
Charge Battery, flash sbf reboot to stockrecovery(power button + vol down) faktory reset reboot
MB525 red lense
bone101 said:
Boot into bootloader "power+vol up"
If battery is down you will read
Battery down cannot progamn"
Charge Battery, flash sbf reboot to stockrecovery(power button + vol down) faktory reset reboot
MB525 red lense
Click to expand...
Click to collapse
The problem is that i can no longer boot to anything. THE only thing that my defy+ does is the white led when connected to pc. nothing else. nothing at all.
And the battery,power button, vol + or vol - doesnt work with nothing because i can only stare at the blank screen of my defy+...
:crying:
Pull battery out ,Hold vol. Up connect to usb ..push battery in
MB525 red lense
bone101 said:
Pull battery out ,Hold vol. Up connect to usb ..push battery in
e
Click to expand...
Click to collapse
The light goes on for a moment
the i push the battery
nothing happens
@enigma9 try the mygyer trick it just has to work, regardless of almost any issue
Sent from my MB526 using xda premium