Database Users

8125 Dead

I have a 8125 and I was able to unlock it fine. After unlocking it I upgraded to the underground crossbow edition rom - which the 8125 rebooted and was running. I tried out a couple things and everything seemed to be running/working fine. It was getting late so I put it down and went to bed. This morning when I got up the phone was off so I went to turn it on and nothing happened. I figured it just ran out of battery power plugged in the charger and guess what no red light on. I have tried everything under the sun but I cant get it to charge or startup. Anyone have any ideas? It was working fine.

i know u said u've tried everything and i don't mean to sound like i'm takin the buscuit, but leave it on charge for n hour, then try bootloader. taking the battery out completely for a while could work.
i had so many problems with crossbow! think this was one of them.

Unplugged
Well so far I left the charger plugged into the phone with the battery in it for over an hour now - with no luck. The red charging light doesn't even come on. Did you have that problem? I also left the battery out and plugged in - still nothing. Tried taking the battery out and then putting it back in while plugged in - no go.
I have not tried the "bootloader" - but the phone will not turn on at all or respond in anyway. Its in a powered down state (or so it seems) - I dont think bootloader will work?? But I dont know anything about bootloader - is it on the ftp site and how do I use it?

Any chance the battery could have been completely discharged?..just a thought. I think i read that completely flat batteries wont charge up via usb. Disregard if thats a silly suggestion, just thought id offer my two cents.

try getting a new battery and see if it boots up...it can be your battery.and you are trying to charge with an AC adapter right?

Wall Charger
I am charing it via the wall charger (not usb) and I am going to try to get another battery. Just weird that I never had a battery problem until I install the wm6??!! Unless the damn thing drained my battery dry and somehow damaged the battery. I called Cingular and they are sending me another unit as its still in warranty. So we'll see when I get it - I will try the new battery. Strange. Very Strange - because everything was working last night.

Strange
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?

Could be a bad battery. You need to test out with some one else battery
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse

HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
u shud have plugged it in while it was booting...did u?

New Battery
Well I finally got the new battery I ordered today. When I put it into my phone it will boot into wm6 fine but will not sync with activesync 4.0 or charge via USB or plugged into the wall. I uninstalled activesync, rebooted my computer and installed Activesync 4.5 - but still no luck with the phone via usb syncing with my pc. Also when the phone in plugged into the wall via the wall charger it does not charge. I am beginning to think the port on the bottom somehow was disabled from the rom update, although I dont see any posts with people having that problem. I guess my next option is trying to reflash it to stock rom via a sd card since it wont connect via USB - however I can not find the information step by step how to do this. Can someone point me in the right direction?

Try going to the bootloader screen: Turn off your phone and then hold the camera button while you turn it on. When you are at the Rainbow screen (thats the bootloader) plug in your USB cord. You should see in the bottom left (above the left soft key) where it says USB. If it doesn't then I'd say your USB port is broken (I'm not aware of any ROM being able to disable that).
As for flashing from the SD card, I believe thats documented in the Wiki...

USB connected msg when not

I have yet to see this issue reported anywhere so was wondering if anyone was having the same problem.
After having the phone charging in the wall my vibrant has started piping up with a notification that usb has connected even though it's not plugged into anything. Rebooting doesn't seem to help.
Any ideas?
Sent from my SGH-T959 using XDA App

Does that when I charge it in my car. I just ignore it.
Sent from my Samsung Vibrant using the XDA app

Does that with my wall charger but I suspect it is happening bc my puppy chewed on the cord. Didn't get all the way thru though and it still charges fine
Sent from my SGH-T959 using XDA App

My phone has been doing the same thing. Says usb connected when nothing is plugged in. stovk firmware, only rooted. Just happened this morning. Apparently many other people have been having the same problem. Can't seem to find a solution yet. Reboot into recovery and wore cache sill no luck. I heard wiping data doesnt work either.

I'm having the same issue but on the Fascinate. I thought that this was do to the Voodoo lagfix so I removed that but it's still happening.
I'm rooted and have CWM loaded but no other modifications.
For me, the USB notifier keeps popping up every second or so. I can't reboot the phone as it still thinks it's connected and shows a battery symbol that isn't charging and then dims. To complete boot I have to either 1) plug in a powered usb cable or 2) pull the battery.
I've had the battery out for 15 minutes and that usually stops this from happening for a day or so. I have no idea what's causing this but I'm leaning towards this being hardware related. Possibly bad battery? I don't know. I have experienced this in my car too.
Some other thoughts, does this phone react differently to different USB cables? I know it's odd, but when I plug into my wall jack using a generic cable I don't get the notifier at all, when I plug into my car with the Samsung cable, sometimes it appears. Of course, it's more of a problem when it appears when no cable it pushed in and it cycles on and off.
Does anyone with this problem have a spare battery they could try?

That happened to me before. I rebooted and that didn't fix it, so I did a master reset and that cleared it up. It was kind of pain to redo everything, but not too bad.

Someone else posted over at Something awful the following:
Stunt Rock posted:
I had a really fun day with my Vibrant yesterday. Interested in seeing if it repeats today. I was on the phone when it just randomly shut down. I was a little surprised, since it was plugged into the car charger and shouldn't have run out of batteries. Then without me pressing any buttons, it boots itself up. Then over the course of the evening it does the following:
* Repeatedly turn itself on then shut itself down while plugged in.
* Repeatedly display the "USB Connected" dialogue while not connected
* Refuse to recognize USB actually IS connected while plugged in to the computer.
* Randomly turn itself off if not connected to USB
* Automatically turn itself on whenever plugged into the USB port.
* Refuse to turn on if the battery cover isn't attached.
Plus some other stuff I'm probably forgetting. I have no idea what started all this.
This continued in more hilarious fashion yesterday when I took it to the T-Mobile store and the rep couldn't get it to boot (it would just give the spinning wheel for a few seconds). The rep called in for a warrant replacement.
I told him it would get past that screen if plugged in. Sadly, I was going out of town and left my USB charger. So I found out if I blew into the USB charging port right as I pushed the power button it would boot.
I charged it overnight and today it continued the errors (repeatedly USB connected while unplugged, etc). T-Mobile tried to push the JI-6 update again. It bricked my phone, again. I went into Odin and restored it to stock, again.
Then I manually applied the JI6 update via ODIN. Phone has been working flawlessly since then.
Click to expand...
Click to collapse
Maybe coincidental but I just blew into my USB port and the notifier stopped flashing on and off.

Serveral ways to do it and it is actually all over this thread as it appears to be a pretty major issue lately. I also had it on my phone, called tech support and they said it was a known issue and JI6 had the fix. I couldn't get the fix since i was on a third party ROM but was able to find Bionix 1.9.1 that has the JI6 update built in and flashed it and have been without the USB annoyance since. So, to fix you can flash a ROM with the JI6 update built in OR use Odin to flash the JI6 to your phone. For me using Rom Manager is easier than Odin.

Read my thread for a fix that worked for me. Its in Q&A
Sent from my SGH-T959 using XDA App

homerbrew said:
That happened to me before. I rebooted and that didn't fix it, so I did a master reset and that cleared it up. It was kind of pain to redo everything, but not too bad.
Click to expand...
Click to collapse
I've done a Factory Reset before when I went back to stock and that didn't help me.

deez1234 said:
Read my thread for a fix that worked for me. Its in Q&A
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I suppose this wouldn't be possible for me as I have the Verizon Fascinate. Our update 2.1 - Update 1, DI01 didn't include a USB fix that I'm aware of.

any body have fix usb connected ?
i've done all which is writes around the internernet after reading 400+ web site threads/posts still not able to solve, Please if anybody have done please share with us
thanks

the vibrant seems to do that when you have a cable that is wired for data transfer, the vibrant sometimes gives you the message even when your not connected to a computer, (I.E. connected to the wall) if you use a cable that does not do data transfer (it will specifically say not for data transfer on the package) then it will never pop up. Rocketfish makes one of these type cables, its usually more convenient to just deal with the notification rather than getting a special cable though. I only got the charging cable cause the data transfer cables were pretty expensive at best buy. the power only cables are a bit cheaper.

@firely
i think you don;t know my all story ;-)
actually without connect charger or usb cable i'm not able to turn on my phone,
after on usb connected message appear at left side top,
i want to trade my phone (its brand new like get before 2 weeks)
that's way i want to solve this problem, Phone Should be on without any power connected like usb and charger,
its my story

USB Issue Perhaps Larger Then It Seems
My update on this, no one seems to have presented a solution. Flashes, kernels, etc don't fix. The problem is it incapacitates your phone, as there is no internal SD card mounted since it thinks USB is plugged in. Can't download songs on SD card, can't power on without it plugged in and seeing battery indicator first. Then last night on top of everything, my market showed downloads that I didn't authorize. Strange behavior, I have put bionix, know how to ODIN, etc, but nothing so far has fixed this USB connected / mounted issue and it seems like I have to return this. I'm worried there is a virus associeted with this behavior. I don't download apps that appear dangerous, (sex related, obscure, not without many downloads or robust developer site). I have a friend who has JI6 but has never rooted or modded and around the same time, Halloween his started this too. Power indicator still indicates charging after unplugged, USB connected constantly flashes off and on, battery life is worse. There is soemthing deeper seemingly happening because rebooting, resetting data, wiping dalvik cache, does not give me the basic ability to turn on phone without USB connection. App settings, I say choose on connect. Finally got computer to recognize again as a drive, but inconsistent, tried to reinstall USB drivers on win7. over all really wonky behavior since it powered down while on charger a week or so ago. Sometimes plugging into wall charger gives error. Only way to get it to stop showing USB message was to unmount phone storage, but now I don't even get options to mount or unmount phone storage. love this screen and have loved modding but frustration is sinking in, will try to get tmo to replace with this, but hoping it's not a larger virus related issue, would be scary deal.

hey said it was a known issue and JI6 had the fix
Click to expand...
Click to collapse
I don't think so: I have the rooted JI6 on the phone incl. Clockw.
Yesterday I see also that the USB cable "should" be connected, after I have enable the Debug-Mode, the red Triangle comes too in the status bar.
That's all in the Underground station
A reboot helps on my side.

USB Woes Continue, Phone Meltdown
This is not just a debugging / reboot issue in my case, it is also effecting my friends who doesn't have bionix, just the JI6 build TMO OTA update. THis is a serious bug, perhaps brought on by a virus who knows, but my buddy who has this same problem is now going ballistic and running into the arms of apple. there is no resolution to this issue throughout the forums. Tmo is exchanging with me, and I have installed multiple ROMs, know how to search forums, kernels, ODIN, all that. Now my radio for cellular doesn't turn on and I have to reboot, it just seems pretty hosed at the moment and I find it coincidental that my friends phone (he is a technical design guy) is having the same mounting SD card issue, basically bottom line is, the thing won't turn on without being plugged in and flashing back to stock, different roms, still will not mount the internal SD card, or recognize it in many cases. I have reformatted, cleared davlik cache, most options from recovery, no dice. can't download to SD card, because it always thinks USB is connected, even when the device is turned off. i hope this resent one works fine and I will document the details since this happened for the hard working devs to have details that maybe can be discovered, but the most worrisome part is that it seems like it may be virus related. I hope that's not the case and just odd coincidence. There is no changing USB settings or debugging combinations that will solve this issue in my experience.
sad but hopeful vibrant owner,
jellyculligan
vibrant with stock (after bionix fusion), oc / uv JAC kernel.

I just got this issue as well and nothing has worked for me so i'll be replacing it with a new vibrant but I wont have a phone for about a month! Does anyone know if tmobile rents out phones?

deez1234 said:
Read my thread for a fix that worked for me. Its in Q&A
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
would you happen to have a link to said thread?

Mine does it when I plug into the wall charger. I just went ahead and synced with the house. Now I can turn the lamps on/off from anywhere.

usb connector not functional only charges! :(

So last week i was trying to plug my Galaxy S using the standard usb cord that Samsung gives us..
however i didnt get any response from my laptop..
then i will unplug the usb..and the device will still say is plug...so i tried to restart the device and it wont start up..the only way to start it is by plugin it in a usb.
so i tried reseting everything....nope the issue wont go away.
i tried flashing to a different rom..had the JPO rom from kies..
and nope the issue wont go away...
flashed actually 2 different roms..and nothing...and yes at the stage that i was flashing the problem seemed to come intermittent.. so whilst i was able to connected it to the pc i decided to odin..
but yes the problem occured.
now the problem is even worst..it just wont start at all...dont know what to do?!
may need to take it to my carrier...
i believe is a hardware issue...
anyone had experiences like that???

Just to clarify, it has worked prior to last week?
My Galaxy S wasn't being detected in USB Mass Storage mode properly last night, but a restart of my pc fixed that.

nandihno said:
So last week i was trying to plug my Galaxy S using the standard usb cord that Samsung gives us..
however i didnt get any response from my laptop..
then i will unplug the usb..and the device will still say is plug...so i tried to restart the device and it wont start up..the only way to start it is by plugin it in a usb.
so i tried reseting everything....nope the issue wont go away.
<SNIP>
?
Click to expand...
Click to collapse
Maybe it's just a bad battery. Does (or did) it start up when you plug it into a wall charger?

No is not the battery..as that charges correctly .my theory is that the data cable of the USB connector has somehow become short..and so is not accepting any data signal

Phone almost Died!

Hey Guys!
So this morning I almost had a heart attack. I left my phone connected to the charger overnight and when I woke up this morning it wouldn't respond! The power button did not work and I couldn't unlock the phone or even put it on silent. The touchscreen froze up or something. I tried removing the battery but no luck. So I had to factory reset the phone, now it works but I lost my apps/widgets and customizations
Any idea why this happened? I don't want it happening again.

Proteus27 said:
Hey Guys!
So this morning I almost had a heart attack. I left my phone connected to the charger overnight and when I woke up this morning it wouldn't respond! The power button did not work and I couldn't unlock the phone or even put it on silent. The touchscreen froze up or something. I tried removing the battery but no luck. So I had to factory reset the phone, now it works but I lost my apps/widgets and customizations
Any idea why this happened? I don't want it happening again.
Click to expand...
Click to collapse
Any recent changes to the phone software-wise? New widgets, Launcher, or something like that? How far in the boot process did you get after the battery pull? Did the animation start, etc?
If you're running clockwork recovery (and you should be! ) then I would have tried wiping cache and dalvik-cache (if you didn't) first before resorting to a full factory wipe.

I'm running stock. The only change I made the night before was the wallpaper. After battery pull it would go to the lock screen, except it wouldn't respond at all not even the power button would respond. T
I want to root the phone but I've been having USB problems. The cable I have apparently doesn't allow transfer of data so I orderd an OEM cable that I'm still waiting on.

The cable is just a cable, never heard of a cable that wouldn't allow data to be transfer... And the problems you told seems to be hardware issues and to me It sounds like you have a faulty phone, you should just replace it.
Sent from my Nexus S using XDA App

I can't... bought it off of eBay. I was told to get another cable, some other people seemed to have that problem and a new cable fixed the problem.

Proteus27 said:
I can't... bought it off of eBay. I was told to get another cable, some other people seemed to have that problem and a new cable fixed the problem.
Click to expand...
Click to collapse
i can actually vouch this is true, my brother had a G2 and i used my usb cable to transfer data, nothing. then i got the white one that came with the phone and it worked.

gratti said:
The cable is just a cable, never heard of a cable that wouldn't allow data to be transfer...
Click to expand...
Click to collapse
I've used cables with some pins shorted (in effect disabling data transfer), for a generally faster charging experience. I've owned a few cables bought from everywhere and some doesn't allow for data transfer especially cheap ones I picked up from eerie places.
In any case, if he was using the cable that came in with the phone, I'm pretty sure it is data-enabled unless he pulled it hard enough to damage the data line. That OR he doesn't have the correct drivers installed.

Well, lets just hope its a cable issue & not a hardware issue. Let us know how it goes.
Sent from my Nexus S using XDA App

Same happened with myphone after some app updates (think it was Google earth). Tried restart multiple times without any luck. Then I changed my sim and it worked magically this time!
Came back to my original sim and everything was fine after that.
Sent from my Nexus S using XDA App

I tried taking the sim in and out, didn't help.
After factory reset its working really great now. I'm assuming it was an app or something. Sucks how I lost everything though.
I'm still waiting on the OEM USB. Just to let you know, the USB cable I have lets the phone charge, when I connect it to my MBP or any other computer but there is no option to go into USB mode on the phone and its not detected by the laptop.
I did manage to transfer music using a very great app that I bought, AirSync. Just wirelessly transferred my music over so the USB not being able to transfer data isn't to much of a big deal anymore.

UPDATE:
So I just received an OEM cable and charger. IT WORKS!
I can finally connect my MBP to my Nexus S.
Next step: Root

[Q] Have a brick...at least for the night

I tried wiping my phone before I went from 3 to 3.1 gingerblur. Know I didn't have to just wanted to clean it up...bad idea. If you get that bright idea do yourself a favor and slap yourself instead! Now it will boot sometimes to give me the option to choose launcher or set up and reboots quickly after. Was going to flash with RSD lite but was worried battery was low so I tried plugging in but keeps booting up and now the red light is on (saying im dead) and i guess i made the right choice. Now i cant recharge to battery because when I plug in it automatically tries to boot which kills the battery. I can get a universal battery charger tomorrow but wanted to see if anyone had any ideas. I've searched forums and google but to nothing useful.
[EDIT] I know to charge up and how to flash...not my first rodeo =D thanks for replies though!i!
Right now im charging my batterey with a universal charger at Radio Shack(Cat # 23-972) and it's charging. Brought my laptop & HDD with RSD installed (v5.x) and proper drivers. Just playing the waiting game... Will update, just hope it helps someone else at this point.

Download RSD Life, 1.83 sbf, and flash jing that method. How to's are in the Dev Secetion.
Sent from my MB860 using XDA App

Without a question - CHARGE IT FIRST!! Otherwise it will be a brick not just for the night

Thanks guys but I know how to flash and I know to charge the battery. Just seeing if theres a way to charge without auto booting or if anyone had ideas. I'm sure I'll be fine just wanted to check...it's hard going a night without a my phone ^_^

Ok, maybe a stupid noobie observation, but can't you just charge with the power off?

turn phone on without plugging in and hold the down button (i think its the right one) so you get the boot options (dont choose any), than plug it in and it should recharge i think (not sure tho), second thought, try that one first tho, put battery out for 10 mins than back in and start charging.

RSD read my device!
crnkoj said:
turn phone on without plugging in and hold the down button (i think its the right one) so you get the boot options (dont choose any), than plug it in and it should recharge i think (not sure tho), second thought, try that one first tho, put battery out for 10 mins than back in and start charging.
Click to expand...
Click to collapse
awesome! thanks! Never read about all those options!
I'm having a devil of a time getting RSD to pick up my device. Have access to another atrix so I know its not the device. Im in rsd mode, drivers and rsd 5.3.x strait from gititbia.ch[ http://gitbrew.org/atrix/?sort=tag ], in win 7 Ive ran as admin, tried every cable (my nexus one cable worked last time), tried starting rsd first then plugged in phone, vis-averse, loaded file first/last, tried running file from desktop and C:/ ,EVERYTHING. I know I'll get it but what a PITA. Last time I used XP machine and I have the same problem, and I had the problem the first time I flashed but it was a stupid rsd-newb mistake. Just gotta keep trying, but I've read just about everything Google gave me and I have no idea WTF's up? thanks for all replies BTW...
[EDIT] Oh and windows, under devices and printers, shows NS FLash Olympus as a device!? ARRGG....Finally got it on XP machine dwith RSD 5.3 and nexus one usb cord

Try rebooting your comp, than start rsd on the comp and let it load, meanwhile start the phone in rsd mode, than connect to usb, thats what works for me. And copy the sbf file to your c:/flash or so, so that its on the system drive + short and basic directory name.