Hello.
I rooted my cell and then install the ics cm9 to my l3 but now a blue robot stuck and cant do anything.
Please help!!!!!!!!!!!!
Probably it is the first boot,it takes 15-20-30 min. to finish.
Just wait.
but im waiting about 2 hours...
Try reflashing again and wipe cache,wipe dalvik and wipe data from recovery.
but how?i cant do anything
even push the buttons
annachtz said:
but how?i cant do anything
even push the buttons
Click to expand...
Click to collapse
try taking the battery of then start phone by pressing (vol up+vol down+menu button+power) combined.
then do the wipe data/cash/dalvik
best wishes
i pressed the buttons u told me and now its shows me emergency mode and nothing else!
ok i found the recovery mode i pressed wipe data and cash and back up and restore but still appear this robot :crying::crying::crying::crying:
finally opeeeeeeeeeeeeeen!
and last question please.
how can i remove this cyanogenmod 9 and make it as it was before with android 2.3?
annachtz said:
finally opeeeeeeeeeeeeeen!
and last question please.
how can i remove this cyanogenmod 9 and make it as it was before with android 2.3?
Click to expand...
Click to collapse
Did you make a back up before you flashed cm9? if you did open the back up and restore menu and select your back up
If not... one of the ways to return is to use the KDZ...as if your bricked your phone. This is how you downgrade/upgrade and unbrick when your phone is in emergency mode,
Do you have a standard l3? you know E400 not E400F,G or R?
Also are you open (unlocked) or are you on a network/carrier, like tmobile. LG Firmware... is where you will get your stock rom to flash in kdz
I guess your new.. but i dont want to write out all the steps.. im sure you can find them if you google or search on here.
Not when you back in stock, you know 2.3 you will have to re root your phone.
FlowUK said:
If not... one of the ways to return is to use the KDZ...as if your bricked your phone.
Click to expand...
Click to collapse
There's also a stock .zip installable from CWM. You might find it if you search the forums.
i fixed it
thanks to everyone
Related
Hi everybody, i got a nice big problem with Onecosmic's 4.0.3 RC2.
I flash it for the first time some day ago and all works good, yesterday i need to restore as factory by the menu and then..it is witch off!
My smartphone now:
If i plug the device to usb it doesn't do nothing, sometimes the little wheel appears , sometimes no.
If i press the central button appears again.
If touch the back and menu button they switch on.
If i switch on the device appears the logo Galaxy S gt i9000 and the color of picture of boot for 0.01 sec and then switching off, sometimes it reboot endlessly.
And then, i can sent my mobile in Downloading mode (Menu - Vol DWN - PWR) but i can't sent my mobile in the other mode (Menu - Vol UP - PWR).
Please i need help cos i really dont know what i can do
Onestly, is my first big problem with costum mod :s
EDIT: I fix up my phone, i need use Odin for flash stock rom and a .pit file, i think it is a good BUG report for One cosmic's 4.0.3 RC2. I can't post in dev. forum
This is a bootloop not a bug. Way too many people without a clue flashing ICS at the mo.
One moment, i dont like it. I think it is a bug or something becouse i went in setting and the i touch on restore data as factory (oh, i dont know the right translation cos i am italian) and the mobile phone bootlopping.
Its a no wipe rom
So for example you can
wipe
instal rom
use
or
wipe
instal rom
wipe
instal custom kernel
use
and can not
wipe
instal rom
wipe
Im having the same problem as you! I'll keep you posted
Sent from my GT-I9000 using XDA App
qpakao said:
Its a no wipe rom
So for example you can
wipe
instal rom
use
or
wipe
instal rom
wipe
instal custom kernel
use
and can not
wipe
instal rom
wipe
Click to expand...
Click to collapse
Thank you i didnt know that RC2 is a no wipe rom.
josueciz said:
Im having the same problem as you! I'll keep you posted
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Let me know when you have some news I fix up my phone with Odin, flashing a stock rom and original .pit file but, as you can read, i lost ICS. I think i will waiting for a Stable release
This is a good site for troubles
ics.samsung-updates.com/trouble
see:
Phone is in boot loop
can't get to Recovery (I9000)
Put phone in Download mode and use FixRecovery.tar.md5 in Odin as PDA, uncheck auto-reboot option.
After flash reboot to recovery with 3-button-combo and CWM flash proper ICS kernel and reboot
For trouble after follow instructions from HOW TO FLASH section proper for Your device
beardedwonder said:
This is a bootloop not a bug. Way too many people without a clue flashing ICS at the mo.
Click to expand...
Click to collapse
I doubt anyone knows what they are doing until they actually do it.
5nakedoc said:
I doubt anyone knows what they are doing until they actually do it.
Click to expand...
Click to collapse
All you need to do is read the relevant thread or the multiple threads in general and q&a to see a the people that have had the problem and the solution. I've posted the solution at least 5 times already
need help! urgent! i was using cm 7.2 lastest maniacs and then made a wipe data because i wanted to go back to froyo, but when i restared the phone cm7 was still there so i decided to flash .sbf the nordic one (the one that i installed when i changed from Android 2.1 to Android 2.2) .. it started good but when it shows "Please Manually Power Up This Phone" Excecuted 100% In Process, the defy screen is just looping in Android boot, it shows the motorola logo then the android boot but it get stuck in there, i removed battery and change it but did not work and the phone just get stuck in Android boot. what can i do?
you must go to stock recovery and clear wipe data chace and you will be ok
nikolas60 said:
you must go to stock recovery and clear wipe data chace and you will be ok
Click to expand...
Click to collapse
But how to do it if the 2nd init isn't installed???
Sent from my MB525 using XDA
Try one new
You should try to flash a diferent sbf... a stock one, look here http://forum.xda-developers.com/showthread.php?t=966537
carlosmebratt said:
You should try to flash a diferent sbf... a stock one, look here http://forum.xda-developers.com/showthread.php?t=966537
Click to expand...
Click to collapse
Thanks men... but i got an answer that helped me out from twa_priv
"You need to wipe in Stock (Motorola) recovery, which is always there.
Shutdown the phone and then:
power + vol down
then push volume up and down at the same time"
at first there is just an android with a triangle but then you should do the vol up and down at the same time and there will be a stock motorola recovery!
thanks for everyone that helped me out with this stuff!
I have rooted my phone and flashed custom firmware b4... when i installed 2int to flash again.... it won't boot up the OS instead it keeps booting 2int... how do i boot into my os again... thx in advance
I am running android 4.1.1 jellybean
hotshot545 said:
I have rooted my phone and flashed custom firmware b4... when i installed 2int to flash again.... it won't boot up the OS instead it keeps booting 2int... how do i boot into my os again... thx in advance
I am running android 4.1.1 jellybean
Click to expand...
Click to collapse
Unfortunately, you cannot flash 2ndinit if you've already installed cyanogenmod, since it already has a bootloader. Goes for all versions of CM. I made the same mistake and had to flash the sbf.
I'm assuming that when you reboot normally you get stuck at the "red M" screen and your capacitive touch buttons might flicker. If that's the case, you will have to flash the sbf, because your bravo is boot looping. Go to this post here and follow the tutorial to the letter.
http://forum.xda-developers.com/showthread.php?t=1559109
If you are having further trouble, post it there.
And don't forget to say thank you to josuearisty
dr. Orange said:
unfortunately, you cannot flash 2ndinit if you've already installed cyanogenmod, since it already has a bootloader. Goes for all versions of cm. I made the same mistake and had to flash the sbf.
I'm assuming that when you reboot normally you get stuck at the "red m" screen and your capacitive touch buttons might flicker. If that's the case, you will have to flash the sbf, because your bravo is boot looping. Go to this post here and follow the tutorial to the letter.
http://forum.xda-developers.com/showthread.php?t=1559109
if you are having further trouble, post it there.
And don't forget to say thank you to josuearisty
Click to expand...
Click to collapse
thank u sooo much
hotshot545 said:
thank u sooo much
Click to expand...
Click to collapse
ok i just wanted to know is there a way to charge phone b4 doing this
hotshot545 said:
ok so if i flash it using sbf lite... will it run stock android 2.2 or will it's still run 4.1.1 and also will it still be rooted or will i have to restore root. and btw b4 i do this can i charge my phone in this "boot loop mode"... srry i am not the best at this kind of stuff... so I would greatly appriciate if you assisted me step by step if you could... thx in advance again..
**don't wanna brick my bravo xD
Click to expand...
Click to collapse
It will run stock 2.2.1 yes. If you follow the instructions from the tutorial, and you have at least a little battery left you should be fine, since you will have your phone plugged into your computer. You will have to re-root as well. When you sbf, you have to start all over, including rooting. Just make sure you follow the tutorial step by step. It does a much better job explaining how to fix everything.
Dr. Orange said:
It will run stock 2.2.1 yes. If you follow the instructions from the tutorial, and you have at least a little battery left you should be fine, since you will have your phone plugged into your computer. You will have to re-root as well. When you sbf, you have to start all over, including rooting. Just make sure you follow the tutorial step by step. It does a much better job explaining how to fix everything.
Click to expand...
Click to collapse
ok thx sooooo much.. approximatly how long will this take
hotshot545 said:
ok thx sooooo much.. approximatly how long will this take
Click to expand...
Click to collapse
Maybe an hour to get you back to jelly bean. It's worth it to take your time before each step so you don't mess anything up.
Dr. Orange said:
Maybe an hour to get you back to jelly bean. It's worth it to take your time before each step so you don't mess anything up.
Click to expand...
Click to collapse
Dude thx a bunch... i'm up and running jelly bean again using 2nd init btw next time i flash how would i do it without 2nd init
hotshot545 said:
Dude thx a bunch... i'm up and running jelly bean again using 2nd init btw next time i flash how would i do it without 2nd init
Click to expand...
Click to collapse
To reboot into recovery, hold the power/hold button down til that menu pops up, then select reboot, then select recovery. It was my pleasure helping. If you have any other questions just ask in the bravo general section and eventuality someone will help. Everyone with bravo is very supportive.
Edit: in recovery you will have options like reboot, wipe cache, wipe data, flash zip, backup/restore, that sort of thing. Usually I backup first just as a precaution, before wiping data and cache and then flashing a new rom. For other zips like gapps, cpu governors, or anything else you can just flash the zip without wiping.
Dr. Orange said:
To reboot into recovery, hold the power/hold button down til that menu pops up, then select reboot, then select recovery. It was my pleasure helping. If you have any other questions just ask in the bravo general section and eventuality someone will help. Everyone with bravo is very supportive.
Edit: in recovery you will have options like reboot, wipe cache, wipe data, flash zip, backup/restore, that sort of thing. Usually I backup first just as a precaution, before wiping data and cache and then flashing a new rom. For other zips like gapps, cpu governors, or anything else you can just flash the zip without wiping.
Click to expand...
Click to collapse
I'm gonna add, since the recovery option in the power button menu doesn't always access 2nd-init recovery (depends on the rom), nor is that option available in all roms, you just need to push the volume up button when the led light turns green when booting up to access the bootmenu. I've had cases where reboot menu recovery went to stock recovery instead of 2nd-init.
Its also a good idea to wipe cache\dalvik cache when flashing things like lockring mods, framework themes, and most theme related mods in general.
skeevy420 said:
I'm gonna add, since the recovery option in the power button menu doesn't always access 2nd-init recovery (depends on the rom), nor is that option available in all roms, you just need to push the volume up button when the led light turns green when booting up to access the bootmenu. I've had cases where reboot menu recovery went to stock recovery instead of 2nd-init.
Its also a good idea to wipe cache\dalvik cache when flashing things like lockring mods, framework themes, and most theme related mods in general.
Click to expand...
Click to collapse
When i start the phone up the led turns blue a few seconds before the boot animation appears... its that when i want to press the volume up key
hotshot545 said:
When i start the phone up the led turns blue a few seconds before the boot animation appears... its that when i want to press the volume up key
Click to expand...
Click to collapse
My fault, its Volume Down, and yes, the green blink before the blue is when you push it.
I got it confused with Stock Recovery, which is Power Button+Volume Up while turning on the phone.
Hi . I purchased a used LG G2 and didnt know that teamwin was installed or if it was stock or rooted.
I noticed an update available and downloaded the same, post which my phone restarted and is now in a bootloop of Team Win recovery Projects menu.
I am not able to get the phone to boot Android anymore
Request all of my senior colleagues to help me as I am a total Newbie and tried to get it fixed from the LG service center but even they couldnt do it as the process is getting stuck at the same place each time.
Recovery-Mode
Can u acsses recovery menu?
Turn phone completly off then hold volume down and home button when screen shows LG then again volume down and homebutton.
Then it should popup a white screen that says Hard Reset.
Now press Home button twice.
Now recovery should load.
Now u select wipe data factroy reset and swipe to right.
Now select reboot device.
What carrier? AT&T, VZW, TMOB.....
Sent from my LG-D800
rahul_puri said:
Hi . I purchased a used LG G2 and didnt know that teamwin was installed or if it was stock or rooted.
I noticed an update available and downloaded the same, post which my phone restarted and is now in a bootloop of Team Win recovery Projects menu.
I am not able to get the phone to boot Android anymore
Request all of my senior colleagues to help me as I am a total Newbie and tried to get it fixed from the LG service center but even they couldnt do it as the process is getting stuck at the same place each time.
Click to expand...
Click to collapse
have you tried this http://forum.xda-developers.com/showthread.php?t=2451696
theefim said:
Can u acsses recovery menu?
Turn phone completly off then hold volume down and home button when screen shows LG then again volume down and homebutton.
Then it should popup a white screen that says Hard Reset.
Now press Home button twice.
Now recovery should load.
Now u select wipe data factroy reset and swipe to right.
Now select reboot device.
Click to expand...
Click to collapse
Hello.. I am afraid that in panic i might have formatted everything with TWRP. That might include a rom file.
I tried the power volum buttom---- Got to the white screen----pressed power button to confirm format----It rebooted and got me to the same Team win screen
I also tried putting the following in the terminal command but ended up stuck at the LG boot screen Logo
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Yes I did. It asked me to reboot, so I did. and after reboot it gets stuck at the LG boot Screen logo.
NevetsDrassel said:
What carrier? AT&T, VZW, TMOB.....
Sent from my LG-D800
Click to expand...
Click to collapse
Its an unlocked International version purchased in India.
Then reset via lg recovery Tools
Sent from my LG-D802 using XDA Premium 4 mobile app
lg g2 sprint phone unlock
Can anyone help guide me through unlocking my lg g2 sprint phone. I have tried all I could but still couldn't call out. I received call on it and sent messages but each time I tried calling out, it returns an error message
XxZombiePikachu said:
have you tried this http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
theefim said:
Then reset via lg recovery Tools
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OK..Do i also need to download some rom along with that? And will it also remove the Team WIN RP?
I want a clean back not normal recovery with nothing extra installed.
rahul_puri said:
OK..Do i also need to download some rom along with that? And will it also remove the Team WIN RP?
I want a clean back not normal recovery with nothing extra installed.
Click to expand...
Click to collapse
that should put you to the moment before you took ota if you want stock you have to use this thread http://forum.xda-developers.com/showthread.php?t=2432476 after you get out of bootloop
If teamwin is actually loading you could just flash a rom through there?
XxZombiePikachu said:
that should put you to the moment before you took ota if you want stock you have to use this thread http://forum.xda-developers.com/showthread.php?t=2432476 after you get out of bootloop
Click to expand...
Click to collapse
is there any way we can live chat on whatsapp while im doing it so that you are aware of every step?
I know im asking too much but im worried coz someone told me nothing can fix it and the board has to be replaced and that will cost hell.lot of money
please help. I will be most grateful to u
AzaG2 said:
If teamwin is actually loading you could just flash a rom through there?
Click to expand...
Click to collapse
yes teamwin ia loading. apparently a couple of software guys in the market tried loading it through teamwin but failed as it gets stuck at a certain point.
can u please provide me with a link of the lg rom so that I can try myself today
rahul_puri said:
yes teamwin ia loading. apparently a couple of software guys in the market tried loading it through teamwin but failed as it gets stuck at a certain point.
can u please provide me with a link of the lg rom so that I can try myself today
Click to expand...
Click to collapse
To go back to completely stock you will have to do it with a kdz, there is a guide here : http://forum.xda-developers.com/showthread.php?t=2625044
Otherwise the easiest solution would to be to flash a flashable rom either stock or aosp, there are now stock kitkat versions flashable but for me to help you with this i need to know what recovery version you are on and your phone variant.
I am having a similar issue, I've wiped my stock rom using TWRP, unfortunately the Rom I was trying to install is corrupted and now I am stuck. For some reason Mount and ADB sideload options arent doing anything for me i.e. my phone does not show up on my PC.
Any help would be appreciated.
LG G2 802
---------- Post added at 10:05 PM ---------- Previous post was at 09:36 PM ----------
tariqsaleem said:
I am having a similar issue, I've wiped my stock rom using TWRP, unfortunately the Rom I was trying to install is corrupted and now I am stuck. For some reason Mount and ADB sideload options arent doing anything for me i.e. my phone does not show up on my PC.
Any help would be appreciated.
LG G2 802
Click to expand...
Click to collapse
Ok so the phone does show up under device manager but Windows is complaining that the drivers arent installed. I know the drivers are installed because I used the same machine to root the phone not too long ago via ADB and everything worked fine. I've tried downloading drivers from LG site and re-installing them but for some reason the phone still isnt getting recognized under device manager
AzaG2 said:
To go back to completely stock you will have to do it with a kdz, there is a guide here : http://forum.xda-developers.com/showthread.php?t=2625044
Otherwise the easiest solution would to be to flash a flashable rom either stock or aosp, there are now stock kitkat versions flashable but for me to help you with this i need to know what recovery version you are on and your phone variant.
Click to expand...
Click to collapse
I will get back to you with the same tomorrow as I will get my phone tomorrow. Thanks
AzaG2 said:
To go back to completely stock you will have to do it with a kdz, there is a guide here : http://forum.xda-developers.com/showthread.php?t=2625044
Otherwise the easiest solution would to be to flash a flashable rom either stock or aosp, there are now stock kitkat versions flashable but for me to help you with this i need to know what recovery version you are on and your phone variant.
Click to expand...
Click to collapse
Did understand some part of . Is this KDZ file a ROM? And how and where should I paste these to Install the ROM?
If TeamWin is failing to install the rom, Is there any other way to flash the rom?
AzaG2 said:
To go back to completely stock you will have to do it with a kdz, there is a guide here : http://forum.xda-developers.com/showthread.php?t=2625044
Otherwise the easiest solution would to be to flash a flashable rom either stock or aosp, there are now stock kitkat versions flashable but for me to help you with this i need to know what recovery version you are on and your phone variant.
Click to expand...
Click to collapse
I'll tell u the situation now. the twrp version is 2.6.3.2. and the phone version is d802 I guess as its an indian version
rahul_puri said:
I'll tell u the situation now. the twrp version is 2.6.3.2. and the phone version is d802 I guess as its an indian version
Click to expand...
Click to collapse
Ok one of your problems will be that that version of TWRP is very outdated now and has a lot of issues,
Start by downloading this version http://forum.xda-developers.com/showthread.php?t=2449679 and flashing it via twrp that will give you version 2.7.0.0
(You can use adb to push this file to your phone to flash or alternatively, the easiest method is either a usb otg cable or otg flashdrive then you can just put the files you need on flashdrive and plug into your phone).
Then if you want a stock based rom and don't wont to follow the instructions from the link i gave you the other day you can install this one http://forum.xda-developers.com/showthread.php?t=2505682
Just follow the instructions on the page, this ROM is basically completely stock with some added tweaks.
The issues you have been facing with the rom installs failing will most likely just be caused by the outdated version of twrp you are using.
Hope this helps and good luck.
I recently purchased a lg g2, the korean variant f320s, it was running kitkat with a lot of bloatware on top. I successfully rooted the phone and after that i found a cwm recovery installer for this version of the phone and i hooked up the phone and ran the installer on my pc, it finished installing and the phone rebooted into the custom recovery which was in chinese i went into a menu option and then pressed the back button on the screen and the phone instantly rebooted and got stuck at lg boot logo. Is there anyway to fix this? i have tried wiping cache, dalvik and factory reset from the recovery that i can access(chinese or something) but to no avail. I can access the download mode but my pc does'nt recognize the phone and this step is crucial for i guess installing the stock rom through lg flash tools. The phone however is recognized when im in recovery and i plug it in but it only shows as a drive that is faded out and entering it shows nothing. please help me i just got it two days ago
Have you tried to use adb to sideload a rom?
playerone_ said:
Have you tried to use adb to sideload a rom?
Click to expand...
Click to collapse
i'm sorry im a complete noob in this regard could you explain a bit on how to go about doing that? i am downloading the stock kitkat rom for the model its in kdz format
.
I flashed cloudy flex rom on it through external sd in recovery and now when i boot it up it stays on lg logo for a while then screen goes black and botts up again directly into CWM recovery, please help someone...
Same problem
sheroy1995 said:
I recently purchased a lg g2, the korean variant f320s, it was running kitkat with a lot of bloatware on top. I successfully rooted the phone and after that i found a cwm recovery installer for this version of the phone and i hooked up the phone and ran the installer on my pc, it finished installing and the phone rebooted into the custom recovery which was in chinese i went into a menu option and then pressed the back button on the screen and the phone instantly rebooted and got stuck at lg boot logo. Is there anyway to fix this? i have tried wiping cache, dalvik and factory reset from the recovery that i can access(chinese or something) but to no avail. I can access the download mode but my pc does'nt recognize the phone and this step is crucial for i guess installing the stock rom through lg flash tools. The phone however is recognized when im in recovery and i plug it in but it only shows as a drive that is faded out and entering it shows nothing. please help me i just got it two days ago
Click to expand...
Click to collapse
EXACT same problem as you... Every detail is exactly the same.
I am trying to find a solution. Any luck?
.
naleyb01 said:
EXACT same problem as you... Every detail is exactly the same.
I am trying to find a solution. Any luck?
Click to expand...
Click to collapse
Yeah you just need to flash a different rom through the sd card i tried cloudy rom but it didnt work then a i tried Lamhoang rom and it did the trick im on jellybean now though and i'll try flashing something else in a month or so
ALL FIXED
You are a legend!! Device back up and running.
Okay so I installed that same rom you did but the home/back/menu buttons weren't working so not wanting to muck around, I did some quick searching (which I should have done before >.<) and worked out how to get the Cloudy roms working on a korean device.
You need "Philz cloudy f320 recovery", the kitkat baseband and the rom. LINK
1 - Install the new recovery from zip and then boot back into recovery after this. You will now be greeted with philz recovery which is awesome.
2 - From here, proceed to install the rom as noted on the rom page.
This process worked for me for the Cloudy G3 V1.3 rom.
Thanks a lot for your help!! happy to return the favour! But i am hoping the above info already does that. :victory:
naleyb01 said:
You are a legend!! Device back up and running.
Okay so I installed that same rom you did but the home/back/menu buttons weren't working so not wanting to muck around, I did some quick searching (which I should have done before >.<) and worked out how to get the Cloudy roms working on a korean device.
You need "Philz cloudy f320 recovery",
1 - Install the new recovery from zip and then boot back into recovery after this. You will now be greeted with philz recovery which is awesome.
2 - From here, proceed to install the rom as noted on the rom page.
This process worked for me for the Cloudy G3 V1.3 rom.
Thanks a lot for your help!! happy to return the favour! But i am hoping the above info already does that. :victory:
Click to expand...
Click to collapse
Good to know you got it working again i still cant figure out why this problem occurred in the first place why did the phone brick from the recovery when the recovery was working fiblne after? Also i can just get the new recovery over the one already on the phone without removing the previous one right? Thanks for the info im gonna try out the cloudy roms soon
I have no idea.. something to do with that chinese recovery I am guessing.. There are still a few issues I am going to address but for now my phone is 95% working.
The only issue is that if I try go into download mode, it still doesn't go to the second screen (All i get is the small blue dots). Bit of a pain because that's something nice to fall back on if you ever need to.
I'll search around and try and figure these out in the next week or two, but I am happy with what I have for the moment.
Yep, you literally install the new recovery over your current one and then you can restart phone back into your rom and then reboot back into recovery using an app or the button method.
naleyb01 said:
I have no idea.. something to do with that chinese recovery I am guessing.. There are still a few issues I am going to address but for now my phone is 95% working.
The only issue is that if I try go into download mode, it still doesn't go to the second screen (All i get is the small blue dots). Bit of a pain because that's something nice to fall back on if you ever need to.
I'll search around and try and figure these out in the next week or two, but I am happy with what I have for the moment.
Yep, you literally install the new recovery over your current one and then you can restart phone back into your rom and then reboot back into recovery using an app or the button method.
Click to expand...
Click to collapse
Yeah i have the same issue with the download mode as well and the phone cant seem to sync properly with the lg mobile support tool either.Do let me know if you figure something out