Database Users

help me with my Desire HD

hi guys .. i have HTC Desire HD it was working very well on version 2.3.3 then i decide to downgrade it to 2.2 so i can get root + recovery by following this guide :
http://forum.xda-developers.com/showthread.php?t=1152233&highlight=downgrade
i followed the instruction EXACTLY as it was posted after i get to bootloader and i made the update the phone restart and died for almost 5 mints then it switched on HTC logo and keeps vibrating for 2 mints then it works normally .
each time i switch it off it needs 5 mints to turn on after that it keep vibrating as i have said even i cant go to bootloader mode (by pressing volume down + power ) but only with terminal command or by using Ultimate Multi Tool .
by the way :- my phone is 2.2 + S-Off + recovery .

Install rom manager and flash recovery again. Then try and flash a new rom.

Scottymeuk said:
Install rom manager and flash recovery again. Then try and flash a new rom.
Click to expand...
Click to collapse
i have tried 3 different ROMs but still the same
( late to switch on and keeps vibrating )​

rdewa said:
i have tried 3 different ROMs but still the same
( late to switch on and keeps vibrating )​
Click to expand...
Click to collapse
I think the problem is that you are using stupid fonts on the forum haha
Erm, try and use a full wipe script, look in the Android Revolution thread.

Probably a corrupt bootloader, maybe try flashing it again?
Sent from my Desire HD using XDA App

uros0104 ...
you mean flash it by installing another ROM or flash bootloader ?

Scottymeuk said:
I think the problem is that you are using stupid fonts on the forum haha
Erm, try and use a full wipe script, look in the Android Revolution thread.
Click to expand...
Click to collapse
no need to use those words man ,,, i tried full wipe by using this FULL_WIPE_1.5_EXT4_.zip

wipe it, Reflash and maybe re-root!

re
Just the bootloader...

I had a similar problem when I tried to root and flash ROM's on to mine.
In the end I started the whole process again. I went right back to the beginning as if my phone wasn't rooted. It seemed to work, I don't know but maybe first time round I made a stupid mistake and was a little more careful on my second run.
Anyway, I would suggest re-rooting your phone, then flashing a ROM again. I know it's long but sometimes it's the only way!
Good luck!

To op.
I would recomend using ROM Manager from market, and from there, flash Clockwork Recovery (CWM).
I don't know what recovery or what rom you have tried, but i could point you in the direction of a CM7 rom (Cyanogenmod) or something like this http://forum.xda-developers.com/showthread.php?t=840040 . That might do the trick..

First time flasher

Finally got my tab back and I am now thinking of flashing a custom from on to it. So I just wanted to know which is the best rom to install on my version P7500 and one that as the least problems. This will be the first time i have done this so how easy is it and what's the best way to do it with out effecting your flash count

I can suggest 2 different ROM´s.
Overcome v2.3.1, all is working, but is Honeycomb 3.2.
Or, when you not need the camera, use ICS 4.03.
(Camera driver is not available at the moment for ICS)
My favorite is AOKP, Version Milestone-4 and update build28.
http://forum.xda-developers.com/showthread.php?t=1459287
Here are some hints:
Installation:
Make sure you're on the latest CWM (root your TAB)
MAKE A NANDROID Backup (in CWM)
wipe data/factory reset in recovery
flash ROM
flash Gapps
reboot

wait for the ICS its coming soon

yogeshmha said:
wait for the ICS its coming soon
Click to expand...
Click to collapse
How longs the wait though

slash0 said:
Installation:
Make sure you're on the latest CWM (root your TAB)
MAKE A NANDROID Backup (in CWM)
wipe data/factory reset in recovery
flash ROM
flash Gapps
reboot
Click to expand...
Click to collapse
When you make a nandroid backup how restore it as last time i tried this when I did the wipe data/factory reset it wiped the phone clean including the back up
[ I bought my tab already rooted and had to restore it to get it fixed]

freddy0000 said:
How longs the wait though
Click to expand...
Click to collapse
Your guess is as good as everyone elses. I've seen estimated times pass already, and several say another month and longer.
Seems the only agreement you'll get is either soon or later, to never.
Sent from my GT-P7510 using XDA Premium HD app

freddy0000 said:
When you make a nandroid backup how restore it as last time i tried this when I did the wipe data/factory reset it wiped the phone clean including the back up
[ I bought my tab already rooted and had to restore it to get it fixed]
Click to expand...
Click to collapse
Nandroid make backups in /mnt/sdcard/clockworkmod/backup,
factory reset does nothing there.

I would also suggest overcome 2.3.1 while waiting for ICS release. I actually use the camera :-(. Otherwise I would be using a custom ICS ROM.
Sent from my GT-P7500 using XDA

Masklinn said:
I would also suggest overcome 2.3.1 while waiting for ICS release. I actually use the camera :-(. Otherwise I would be using a custom ICS ROM.
Sent from my GT-P7500 using XDA
Click to expand...
Click to collapse
How good is overcome 2.3.1 am on the original rom 3.2 and it still feels like it struggles at times

Give the rom a change and flash it, you will see it is awesome,
but the custom ICS roms are also for daily use ready.
The only possibility to determine which rom is better for you,
is to flash it all.
You can not damage your TAB, and with Odin you can anytime back to stock samsung firmware, which were found on sammobile homepage.

Will this effect your flashcount

How do you root the 3g version there used to be a guide on here but i cant find it

This guide is the best and it works for the 3g model as well
http://forum.xda-developers.com/showthread.php?p=17070949
EDIT: if you have your driver already installed and you are able to use ODIN you don't need to use the one that is provided in the thread
Sent from my GT-P7500 using XDA

freddy0000 said:
How good is overcome 2.3.1 am on the original rom 3.2 and it still feels like it struggles at times
Click to expand...
Click to collapse
Overcome is really an excellent ROM. not a single problem since I flashed it and no lags
Sent from my GT-P7500 using XDA

freddy0000 said:
How do you root the 3g version there used to be a guide on here but i cant find it
Click to expand...
Click to collapse
freddy0000 said:
How good is overcome 2.3.1 am on the original rom 3.2 and it still feels like it struggles at times
Click to expand...
Click to collapse
Take a look at this, it can also be helpful...
http://forum.xda-developers.com/showthread.php?t=1348533

I've just installed it now and am about to do a factory reset I was just wondering if there was any way to make GSM Voice call on this yet

ICS ................ and everything else
freddy0000 said:
How longs the wait though
Click to expand...
Click to collapse
Samsung has already rolled out ICS for galaxy S II and the ICS for GT 10.1 is supposed to be released soon but soon is such a bad word to use since its always used to evade responsibilities!
Anyhow I am hopefully Samsung will push it out before end of Q2 as promised before but what saddens me is that the next Android Jelly bean is right around the corner yet all the companies are struggling to update their devices to ICS. Android's biggest problem as of right now is fragmentation and Google should look into it seriously!
freddy0000 said:
Finally got my tab back and I am now thinking of flashing a custom from on to it. So I just wanted to know which is the best rom to install on my version P7500 and one that as the least problems. This will be the first time i have done this so how easy is it and what's the best way to do it with out effecting your flash count
Click to expand...
Click to collapse
And also I would suggest ICS rom from AOKP as even though Task did an amazing job with his Task14 rom it struggles at time to do very simple things where as ICS is blazing fast even though u might find hiccups once in a while !

freddy0000 said:
I've just installed it now and am about to do a factory reset I was just wondering if there was any way to make GSM Voice call on this yet
Click to expand...
Click to collapse
Did you also flashed the correct file,
there are two full versions available?
GT-P7500 / 3G-WiFi
Overcome_10.1_Series_v2.3.1_P7500_Full.zip
http://www.rosanoscorner.com/p7500/downloads/Overcome_10.1_Series_v2.3.1_P7500_Full.zip
GT-P7510 / WIFI only
Overcome_10.1_Series_v2.3.1_P7510_Full.zip

First of all there is no way to avoid that 'flash count' thing...
Now, there is no need of rooting if u are going to flash a custom rom like ICS (preferably AOSP) or Overcome....coz they come pre-rooted...
1) Grab the latest odin flashable CWM recovery from http://droidbasement.com/galaxy/recovery/cwm5/p4/recovery.tar.md5
2) Flash the above downloaded CWM in the PDA section of Odin. in the Download mode (press the vol down button while turning on the tab...when two icons appear, press the vol up button and again confirm by the vol up)
3) Also Download the required Custom Rom .zip file and copy it to the SD card root of ur Tab..
4) Turn the tab off and while restarting again enter bootloader mode by keeping the vol down key pressed...now use the vol down key to navigate to the left icon nd use the vol up key to confirm...now u'll enter CWM recovery...
5) Use the volume keys to navigate...nd power switch to confirm.
6) Wipe user data...cache nd dalvik cache (in advanced)...
7) Now go to 'install zip from SD card' nd 'choose zip from sd card'
8) Now choose the zip file dat u copied earlier nd confirm...(if u flash ICS then u also hav to Flash Gapps without a reboot in between)
9) After everythng is done reboot your tab...nd ur done...
10) Enjoy....nd Happy Flashing..!!!

slash0 said:
Did you also flashed the correct file,
there are two full versions available?
GT-P7500 / 3G-WiFi
Overcome_10.1_Series_v2.3.1_P7500_Full.zip
http://www.rosanoscorner.com/p7500/downloads/Overcome_10.1_Series_v2.3.1_P7500_Full.zip
GT-P7510 / WIFI only
Overcome_10.1_Series_v2.3.1_P7510_Full.zip
Click to expand...
Click to collapse
Ye i flashed the right version

Stuck at Language selection . . . . Help Needed

Been thru a every post possible , flashing between 6-8 stock roms and 3-4 custom roms , I still get the same problem from every one of them . Whenever the phone starts up , either I click on the green android logo or language selection , I will be stuck . The phone just freeze or reboot after a min or two . At times , I will get stuck at a bootloop at the " Samsung " screen .
All these started when I downgraded from Criskelo v7 back to Gingerbread using PC Odin , flashing stock pre-rooted LC2 rom . After a boot up from LC2 , I get this problem suddenly and it hasn't go away since . Even try changing kernels from speedmod to franco to CF root yet I still get the same problem . Any suggestion will be helpful and appreciated .
P/S : Sorry for my poor english

No guarantees it'll with for you, but I have had similar symptoms some time ago, after downgrading from ICS to GB. What helped in my case was wiping cache and dalvik from recovery (or using jbroid script). Operation should be safe on GB kernels, but, should you want to try, check again on superbrick causes to avoid disaster.
Sent from my GT-N7000 using xda premium

p107r0 said:
No guarantees it'll with for you, but I have had similar symptoms some time ago, after downgrading from ICS to GB. What helped in my case was wiping cache and dalvik from recovery (or using jbroid script). Operation should be safe on GB kernels, but, should you want to try, check again on superbrick causes to avoid disaster.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Tx for the help but I tried wiping everything and also using jbroid before I flash a new kernel just to be sure yet it's' still the same .

Try flashing Stock KL3 rom via pc odin.

Rulinglionadi said:
Try flashing Stock KL3 rom via pc odin.
Click to expand...
Click to collapse
Did that ...... Same problem ... Just noticed that whenever I boot up and get stuck at language selection , pressing the power button doesn't bring out any menu . It's blank . I have to either take out the battery or long press the power button to turn it off . Not sure if it's the case for official stock rom but i have this problem as well on custom roms .

can you use the 'press all four corners to skip setup' trick?
I had this issue when coming from ICS to GB, and had to clear data from google services framework

LemonPowerForce said:
can you use the 'press all four corners to skip setup' trick?
I had this issue when coming from ICS to GB, and had to clear data from google services framework
Click to expand...
Click to collapse
Havent tried that as I havent encounter it before . How does it work ? Mind to share please . Thank you

[FIX] Auto rotate and accelerometer bricked on JB roms

Hello! I have been observing for the past few weeks how the accelerometer on my device stopped working after i flashed a jellybean rom. The curious thing is that if i installed any other rom (sense or non-sense ICS or GB) my accelerometer started working perfectly.
So i followed a few recomendations from other users who told me to use Aahk and return to full stock then re-root flash recovery and flash jb rom.
I did that and guess what everything was fine until today when i switched from a sense 4 rom back to jb and the problem with auto rotate was back.
I am not a dev but something in the sense 4 rom is killing the accelerometer for any/all jb roms flashed afterwards ( yes i have wiped everything 3x even with ARHD superwipe script)
And now the good part, i was experimenting today to see how i could get back accelerometer functionality without going through aahk re-stock procedure and i found a way:
1. Download this stock rooted rom: http://forum.xda-developers.com/showthread.php?t=1382235
2. Put it on your sd card , reboot in recovery , wipe everything except sd card (obviously) and install it
3. Let it boot at least once, go through initial setup, reboot recovery wipe everything, and now you are ready to flash jb with working auto rotate
P.S. to reboot in recovery with stock rooted rom you have more options ( no advanced power menu)
1, From adb : adb reboot recovery
2. Download quick boot from playstore ----> https://play.google.com/store/search?q=quick+boot&c=apps
3. Pull battery out then put it back in keep volume down and power buttons pressed until you enter bootloader from here navigate to recovery and you are done.
I hope i am right. I had but only one dhd to test.

don't work for me :s
have test with this stock rom (full) and super stock rom 3.20 from inspire 4G thread;
i have a DHD.
with hboot 0.85 it work (before have hboot 2.0 from aahk)

there are 2 files with no extensions, how do I flash it ?

tripleR123 said:
there are 2 files with no extensions, how do I flash it ?
Click to expand...
Click to collapse
extract with 7zip

bondocel said:
Hello! I have been observing for the past few weeks how the accelerometer on my device stopped working after i flashed a jellybean rom. The curious thing is that if i installed any other rom (sense or non-sense ICS or GB) my accelerometer started working perfectly.
So i followed a few recomendations from other users who told me to use Aahk and return to full stock then re-root flash recovery and flash jb rom.
I did that and guess what everything was fine until today when i switched from a sense 4 rom back to jb and the problem with auto rotate was back.
I am not a dev but something in the sense 4 rom is killing the accelerometer for any/all jb roms flashed afterwards ( yes i have wiped everything 3x even with ARHD superwipe script)
And now the good part, i was experimenting today to see how i could get back accelerometer functionality without going through aahk re-stock procedure and i found a way:
1. Download this stock rooted rom: http://forum.xda-developers.com/showthread.php?t=1382235
2. Put it on your sd card , reboot in recovery , wipe everything except sd card (obviously) and install it
3. Let it boot at least once, go through initial setup, reboot recovery wipe everything, and now you are ready to flash jb with working auto rotate
P.S. to reboot in recovery with stock rooted rom you have more options ( no advanced power menu)
1, From adb : adb reboot recovery
2. Download quick boot from playstore ----> https://play.google.com/store/search?q=quick+boot&c=apps
3. Pull battery out then put it back in keep volume down and power buttons pressed until you enter bootloader from here navigate to recovery and you are done.
I hope i am right. I had but only one dhd to test.
Click to expand...
Click to collapse
Doubt it has to do with the rom you had installed before, but it has to do with the kernel etc. Have not checked the link you posted above but I am certain you have tried the JellyTime Rom and it is true that the accelerometer does not work. However, jellybean is still more than anything still new at best to our device and it will take time for it to be fully stable, taking into the account that HTC never had plans on upgrading us to JellyBean
Sent from my HTC Inspire 4G using xda app-developers app

It has nothing to do with kernel, flash a sense 4 rom and then a jb rom , any jb rom ( paranidandroid for examlpe) and the auto rotate doesn't work and you can change kernels and the auto rotate doesn't work

bondocel said:
It has nothing to do with kernel, flash a sense 4 rom and then a jb rom , any jb rom ( paranidandroid for examlpe) and the auto rotate doesn't work and you can change kernels and the auto rotate doesn't work
Click to expand...
Click to collapse
Just to clarify things... There is a cahce partition in our phones (Im not talking about Dalvik Cache)
The data in this cache partition won't be erased even with a full wipe.
When you install a JB rom, you CAN have conflicts in it ( not all users experince this ... )
So the only way , was to use the RUU, because the process it is using include wiping this cache partition ....
However , the cause of this conflict is still unkown , even if one day , if i rememeber, Synergy pointed out that the problem had to do with the upstream in custom JB roms.

Rikodu said:
Just to clarify things... There is a cahce partition in our phones (Im not talking about Dalvik Cache)
The data in this cache partition won't be erased even with a full wipe.
When you install a JB rom, you CAN have conflicts in it ( not all users experince this ... )
So the only way , was to use the RUU, because the process it is using include wiping this cache partition ....
However , the cause of this conflict is still unkown , even if one day , if i rememeber, Synergy pointed out that the problem had to do with the upstream in custom JB roms.
Click to expand...
Click to collapse
Shiiittt, i have only stock RUU sense 2.1 and arhd 6.3.3 can i do this because i try arhd it doesnt work ..
Sent from my hTC Desire HD powered CM10 by Syngergy(e)™

qazsxdcfv said:
Shiiittt, i have only stock RUU sense 2.1 and arhd 6.3.3 can i do this because i try arhd it doesnt work ..
Click to expand...
Click to collapse
Have a look here if it can help you http://forum.xda-developers.com/showthread.php?t=1970972

Worked for me! Thanks!
Sent from my Desire HD using xda app-developers app

Have had this bug, too. Now it works. Thank you

Rikodu said:
Just to clarify things... There is a cahce partition in our phones (Im not talking about Dalvik Cache)
The data in this cache partition won't be erased even with a full wipe.
When you install a JB rom, you CAN have conflicts in it ( not all users experince this ... )
So the only way , was to use the RUU, because the process it is using include wiping this cache partition ....
However , the cause of this conflict is still unkown , even if one day , if i rememeber, Synergy pointed out that the problem had to do with the upstream in custom JB roms.
Click to expand...
Click to collapse
The first time i returned to stock i used aahk and i fully returned to stock ( s-on ) and then i rerooted and flashed recovery but with the help of the aahk devs i realized that i didn't have to go full stock actualy you don't even have to use ruu you just need a stock rooted rom zip to flash in recovery and allow it to run once.
This is easy to do just flash it like any other rom in recovery let it power on and let sense start then reboot recovery and flash jb and you have working accelerometer and auto-rotate

bondocel said:
The first time i returned to stock i used aahk and i fully returned to stock ( s-on ) and then i rerooted and flashed recovery but with the help of the aahk devs i realized that i didn't have to go full stock actualy you don't even have to use ruu you just need a stock rooted rom zip to flash in recovery and allow it to run once.
This is easy to do just flash it like any other rom in recovery let it power on and let sense start then reboot recovery and flash jb and you have working accelerometer and auto-rotate
Click to expand...
Click to collapse
First point, returning to stock doesnt mean you are making your device S-on again
Second point, I did not say that your solution isnt working.. It is just that it did not work for everyone (see my thread)
Third point, Accelerometer is stil working on JB even if your auto rotation doesnt work... The proof ??? you can use manual rotation with an application form the PlayStore( unfortunatly, I forgot its name)

Bingo ! :good::good:
Thank you very much...

Rikodu said:
First point, returning to stock doesnt mean you are making your device S-on again
Second point, I did not say that your solution isnt working.. It is just that it did not work for everyone (see my thread)
Third point, Accelerometer is stil working on JB even if your auto rotation doesnt work... The proof ??? you can use manual rotation with an application form the PlayStore( unfortunatly, I forgot its name)
Click to expand...
Click to collapse
The accelerometer in my case didn't work at all on jb roms. I have tried, exactly as you suggested using andro sensor from play store, and my accelerometer was on a gray background and nothing was changing in read values as i tilted the phone. But from what i have heard it is also a radio related issue plus that pesky cache partition.
But i'm sure that the devs will figure a out an easyer way my friend.

bondocel said:
The accelerometer in my case didn't work at all on jb roms. I have tried, exactly as you suggested using andro sensor from play store, and my accelerometer was on a gray background and nothing was changing in read values as i tilted the phone. But from what i have heard it is also a radio related issue plus that pesky cache partition.
But i'm sure that the devs will figure a out an easyer way my friend.
Click to expand...
Click to collapse
Mysteries ... There are still a lot of mysteries
Anyway, the important is that we can use auto rotation again whatever the solution is....
However, I hope too that devs will figure out what is the real culprit even if I see this as not being their priority for now

Rikodu said:
Mysteries ... There are still a lot of mysteries
Anyway, the important is that we can use auto rotation again whatever the solution is....
However, I hope too that devs will figure out what is the real culprit even if I see this as not being their priority for now
Click to expand...
Click to collapse
+1 you are right my friend

Brick? Hardware/Software bug?

Hi guys,
Yesterday, i turned off my device to sleep. When i turnet it on, it restart 3 times in sequence, than i take off battery , waited 1min e turned on again. But, it wasnt load OS, it freezed at Samsung logo.
So i decided to try restore the custom room (Google Edition), but i cant entered at cwm recovery, freezed downloading mode screen. Than i tried to flash with odin cwm again. Flash sucessfully but could not load cwm.
Than im started to getting panic, nervous and patience gone. I downloaded from sammobile the stock room and flash with odin. It isnt work again. After flash, the phone boot and freeze for loooooong time at screen with blue text recovering boot and Samsung logo.
I tried from KIES too, but have no sucess...
I dont know what I must have to do anymore. My ideas, knowlodge are now over. Is that any possible about triangle way cause this ? My device doesnt boot anymore. Always freezing screen. I waited for many minutes, like 20minutes and nothing.
Files that i downloaded:
- I9505_VJUBMG3_STOCK_RECOVERY.tar.md5
- I9505VJUBMG3_STOCK_KERNEL.tar.md5
- I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
- I9505VJUAMDM_I9505ZTOAMDM_I9505VJUAMDM_HOME.tar.md5
- and Philz recovery, CWM recovery.
Guys, what really happened?

funny thing
tha same happened to me last week.
I fixed it by downloading another version of Stock Rom for s4 and flashing it with odin.
The stock rom I used had only 1 file (1.7gb) and flashed it using only the pda button.
maybe it will work for you also.
oh and by the way
I used team win recovery project instead of CWM recovery

j1miroquai said:
funny thing
tha same happened to me last week.
I fixed it by downloading another version of Stock Rom for s4 and flashing it with odin.
The stock rom I used had only 1 file (1.7gb) and flashed it using only the pda button.
maybe it will work for you also.
oh and by the way
I used team win recovery project instead of CWM recovery
Click to expand...
Click to collapse
I9505VJUAMDM_I9505ZTOAMDM_I9505VJUAMDM_HOME.tar.md 5 this is a stock room, 1.7gb. After i flashed this, it freezed at Samsung Logo with blue text recovering boot
i will try team win recovery too.
Man what else you did to fix it? im going for 2nd day without mobile...

I used this one
hxxp://hotfile.com/dl/231752980/98f5969/EUR-I9505XXUBMEA-20130624154055.zip.html
it's a stock Greek Rom (I'm from Greece )
I just installed it via odin 3.07 , placed the rom on the pda button and that`s it.
after that I installed team win recovery project via Odin again .(and again on the pda button)
the link is this one hxxp://teamw.in/project/twrp2/182
hope it will help you

j1miroquai said:
I used this one
hxxp://hotfile.com/dl/231752980/98f5969/EUR-I9505XXUBMEA-20130624154055.zip.html
it's a stock Greek Rom (I'm from Greece )
I just installed it via odin 3.07 , placed the rom on the pda button and that`s it.
after that I installed team win recovery project via Odin again .(and again on the pda button)
the link is this one hxxp://teamw.in/project/twrp2/182
hope it will help you
Click to expand...
Click to collapse
Yeah, i think my problem isnt the room, because i have 2 here, one default from sammbile and other I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
My problem is after flash the room, it isnt boot. It stop at Samsung logo with blue text recovering boot. How long did you waited for this? Or you just disconnect cable after reboot and flash again to teamwin ?

GuiCunha said:
Yeah, i think my problem isnt the room, because i have 2 here, one default from sammbile and other I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
My problem is after flash the room, it isnt boot. It stop at Samsung logo with blue text recovering boot. How long did you waited for this? Or you just disconnect cable after reboot and flash again to teamwin ?
Click to expand...
Click to collapse
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).

RATOz said:
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
Click to expand...
Click to collapse
Ok, i did. Waiting recovering boot....

GuiCunha said:
Ok, i did. Waiting recovering boot....
Click to expand...
Click to collapse
Did you try what I've told you?
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT

dandroid13 said:
Did you try what I've told you?
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
Click to expand...
Click to collapse
Yes buddy, but that room is flashable with recovery mode and i cant entered into recovery. Or i made a mistake and download the wrong room?

GuiCunha said:
Yes buddy, but that room is flashable with recovery mode and i cant entered into recovery. Or i made a mistake and download the wrong room?
Click to expand...
Click to collapse
That was a Odin file...
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT

dandroid13 said:
That was a Odin file...
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
Click to expand...
Click to collapse
OMG!
Give me the download link please! I've downloaded a lot, lot of links...
Please. I pay you a beer soon.

RATOz said:
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
Click to expand...
Click to collapse
Are you sure that it delays 20 minutes?

Tried entering recovery with TWRP?

I think there is something before enter recovery system. That is my problem.

GuiCunha said:
I think there is something before enter recovery system. That is my problem.
Click to expand...
Click to collapse
But you should try it too!

dandroid13 said:
But you should try it too!
Click to expand...
Click to collapse
I've alredy tried. :\
Thanks anyway.

GuiCunha said:
I've alredy tried. :\
Thanks anyway.
Click to expand...
Click to collapse
TWRP isn't CWM, didn't see you mention it yet.

Today i must to give up, because time is against me. I leave the device at samsung assistence. Lets see what they will say for me.
I dont have screenshots, but im sure that i follow all those steps correctly. I tried many ways with odin, ticking unticking things, step by step.
By the way, im so happy with all here tried to help me. The beautifull word that i can say is Thanks, thanks guys!
Weird think: Switching from S4 for X10 is a punishment! My old and warrior X10 have no more battery life, like a mini screen now, slow cpu... but its ok, is better than my x810i.
Thank You guys (all people that help me), for everything.