Database Users

Phone wont turn on

Hello!
Sorry if I posted this thread wrong, but I really need help from you guys. I've been searching trough the forum for hours, bit didn't find how to fix my Elf. When i turn it on it only show "smart mobility" and then turns off again. I can get it to bootloader via usb-cabel, but how do I flash it with a new rom from here? I need a original english rom, and my phone info is:
Device ID : ELF010000
CID : HTC_H10
IPL : 1.11.0002
SPL : 1.11.0000
ROM version : 1.11.409.1B
Ext ROM version : 1.11.409.101
Operator version : None
Language : Norwegian --> but I need english
I really hope you guys can help! Spent a lot of money on this phone

I have also run into this problem when I flashed to Onyx stable. Win 6.1
Is there a fix for this or must a new ROM be loaded?
Thanks!!

Try downloading the official rom first from http://forum.xda-developers.com/showthread.php?t=442391. It comes as an installer and no need for spl's or uspl's etc etc since it is an official rom. It should work and you'll have a usable phone again

Cool thanks, I managed to sort it out this morning by opening the bootloader screen
and reflashing the uspl and ROM.

[Q] T-Mobile MDA Touch Firmware problem

Hey guys,
i have a big problem,
my t-mobile mda touch (htc touch) (elfin 256/128) is stuck at the operator logo, i have tried the CID unlock and the software says all OK, i have tried to flash a new rom ... error!
10 hours later i know this:
my htc elfin is not unlocked (cid) , i have forgot to save my original firmware,
i have found a firmware with same device id and cid id but its says errorcode 270 ^^
the bootloader is OK with spl 2.26 and ipl 1.17.0002 and mtty connection is possible.
now my question is: can i save my elfin only with the "goldcard" method or i have now a BIG problem?
i dont know now what i can do, im tired, i sit 12 hours with google and forum search and my elfin is bricked...
help pls
thank you
(sorry for my english)
device:
Touch version : Elfin
Device ID : ELF030050
CID : T-MOB101
IPL : 2.26.0002
SPL : 2.26.0000
ROM Version : 2.26.111.53
ExtROM Version : 2.26.111.153
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEL001-00

Magna00 said:
Hey guys,
i have a big problem,
my t-mobile mda touch (htc touch) (elfin 256/128) is stuck at the operator logo, i have tried the CID unlock and the software says all OK, i have tried to flash a new rom ... error!
Click to expand...
Click to collapse
What exactly did you do to end up stuck at bootscreen?
Was this the result of trying to CID-unlock?
Magna00 said:
10 hours later i know this:
my htc elfin is not unlocked (cid) , i have forgot to save my original firmware,
Click to expand...
Click to collapse
That's not really a problem..
Magna00 said:
i have found a firmware with same device id and cid id but its says errorcode 270 ^^
Click to expand...
Click to collapse
Which rom did you use?
Magna00 said:
the bootloader is OK with spl 2.26 and ipl 1.17.0002 and mtty connection is possible.
Click to expand...
Click to collapse
Given the fact that you have an Elfin and your IPL is 1.71.0002, my guess is that you flashed a rom meant for the Elf(128/64).
Magna00 said:
now my question is: can i save my elfin only with the "goldcard" method or i have now a BIG problem?
Click to expand...
Click to collapse
Follow the steps from the first post here...
Regards!

oops i see my problem ... holy sh...
i have used this here - first post
http://forum.xda-developers.com/showthread.php?t=408637
have i bricked the phone?
because the "unbrick" firmware dont help me and give error invalid vender id 294

can anyone help me? what can i do now? goldcard is at the moment not possible, because i dont have a compatible card reader or phone...

answer
try spl 3.10 and ipl 3.10
your problem may be resolved

i used this here
http://forum.xda-developers.com/showthread.php?t=408637&highlight=ipl+3.10
update error 270

i think ur phone is not cid unlocked try hardspl3.10 and ipl 3.10 again.
After that try to flash with onyx 6.14 rom
I think your phone will come alive,because my phone also hav the same problem when i unlocked the different spl and ipl.

i have post it, that the phone is not cid unlocked,
i tryed hardspl 3.10 from here
http://forum.xda-developers.com/showthread.php?t=445666&highlight=hardspl
see picture for my problem
he dont know the image from my phone, normal?

Are you able to boot into windows (on your pda)?
YES
Then you can use SoftSPL (aka "white screen method") to flash a HardSPL (or a USPL) in order to CID-Unlock your pda.
NO
Then you CAN NOT use SoftSPL (aka "white screen method") to flash a HardSPL (or a USPL) in order to CID-Unlock your pda.
Is there any other solution?
Flash an Official Shipped ROM with CID & MID that match your pda's
Flash the "Unbricker rom"(try both via usb and from sd-card)
Use the "GoldCard" method (which requires an Official Shipped ROM with MID that matches your pda's)
Good luck!
PS: I'm not posting ANY links in order to make you search on your own.
Sorry, but I feel that I have posted the same things over and over again...

thx for your answer, anyone read my post here?
1. im not able to boot into windows on my pda ...
2. i have read a lot of threads here in this forum
3. i dont find a shipped rom with my cid and mid .... when you have one for me, post the link please!
4. with the unbricker rom per usb i get the message error 270 (see post 6)
and flash with sd-card .. no error .. no flash .. i see the bootloader (i tried 2 micro sd cards)
5. goldcard method (see post 4) i dont have the hardware here and nobody has a windows or android pone ^^
and now?
other question:
i need for the goldcard exactly my original rom? i have think i can use any rom with this method ... damn it

so now i have it ... i have read the sd card cid with my gps device ... that run on win ce ...
then i have great a goldcard image and then i used the o2 rom update and now its fully functional
48h working and nothing happend and only what i need is a goldcard -.-

[Q] NEED HELP FOR P3450 pls

Hi i'm sebastiano, can someone help me pls?
i've buyed an htc p3450 with windows 6 , but i don't know the id and other codes.
i only know theese: ipl 2.20.0002
spl 1.11.0000
this morning i tried to change original rom with onyx 5.6
i've made this things:
i've installed cert.spcs.cab and enablerapi.cab
after using ELF_USPL_2.26.0000 i made the procedure for charge rom
and all were ok.
after i used the new os and its worked good. i made an hard reset before using definitively it. but after 10 minutes the system didn't start yet.
It run the image of Tim Operator and shut down.
The boot loader work now. i tryed to reinstall the sistem, the procedure finish without problem but when the system try to initialize the new rom , display the tim logos and after shut down..
someone know what i do and why system not reboot?
i read that i need the original italian rom for retry all my operations..but i don't know hot to find the id of my precedent rom...
pls help me

What's your actual IPL/SPL ? (you can see it in bootloader)

ipl 2.20.0002
spl 1.11.0000
theese are now

Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.

tito12 said:
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
Click to expand...
Click to collapse
yes it's surely elf because on the box the name is htc p3450/3452 Ita S
so elf isn't S i think is the xl model

now i'm going out, but if you can help me to know what is the problem, tomorrow we can meet again
i want to remove tim's brand and i will put in a good rom with large buttons
see you bb and thanks

As far as I know xl is elfin, and if you flashed the wrong rom maybe that's why you got this problem. Anyway here's a link to a good friend who's probably more expert on Italian roms than me, Flaviopak, send him a pm http://forum.xda-developers.com/member.php?u=778494

Issue with my HTC Touch P3450 in Lock screen

Hi Guys,
I have this issue with my Touch P3450...while entering password for unlocking the phone...it automatically backspaces evey digit i enter to unlock the phone...due to which i am unable to use it...any body facing the same issue and any soutions for the same...have tried removing all the hardware keys to check if any thing wrong with hardware...but the same issue...have been using the phone frm last 2 yrs without any issues.... Any solutions...
Thanks in advance...
Sent from my HTC Desire S using xda premium

Very strange, try mobiler to input from desktop... But maybe it won't connect in locked mode.

Sounds like your digitizer may be damaged to me. Try my mobiler as suggested above. But I think he it right, it may not work when locked.
Sent from my Desire HD using Tapatalk

i need help on HTC-3450
i have download onyx 6.0 very and try to install it. every time it just goes to 2% and then stop n says image maybe corrupted. check your update rom utility.
even from this forum i have downloaded cid patch, and hardspl still when i go to update same error comes,
so if plz can some one guide me step by step what i should really do to update this rom on my htc p-3450 n i have brought this from uae so i dnt think its sim lock or something but plz do guide me as soon thx in advance

If you tried to flash rom before you unlocked the cid, then you are in trouble. Does your device boot normally? If yes use this tool http://forum.xda-developers.com/showthread.php?t=418892 to let us know more about it.

CID is unlocked and am using a custom rom...will sure check the link and give it a try....thanks for the info....
Sent from my HTC Desire S using xda premium

Great to hear
Could you please explain how you solved your problem so others can enjoy too ?
P's: the link was intended for madicoot

thx for the help
ok like you gave the link i followed that link, with that i got my device info, after that now what i have to do, like you said i have to unlock my cid , in that no file is include like cid unlock or something, or do i have to run that onyx 6.0 directly

Post your device info here so we can get an idea

my device info
HTC Touch device information - by dsixda
Touch version : Elf
Device ID : ELF010000
CID : HTC__J15
IPL : 1.17.0002
SPL : 1.17.0000
ROM Version : 1.17.415.3
ExtROM Version : 1.17.415.103
Operator Version: None
AKU Version : 0.2.3
Page Pool (MB) : 8
RAM Size (MB) : 64
ROM Size (MB) : 128
Model No. : ELF0300
Part Number : 99HDM058-00
SIM Unlock Code : 35219311
MCC+MNC :
ok this is my device info, now what ahead i have to do, so i can install
onyx_6_release14 but still when i run custom ruu, it goes to 2 % n says image corrupt n installation stops. plz help thx in advance

I asked you to post info so we can tell you what to do next... And obviously you're Cid locked, trying to install rom can brick your device! Can you boot normally? if not your only option is to find your original stock rom .

hi tito
yeah my phone is HTC P-3450
n other info which i got from that device info file i posted in the earlier post, yes my phone is still booting in normal mode, it just that when i try to install the onyx it gives me error of image corrupt n then it reboot n start in normal window. thx for guiding me

Ok, go to this thread and follow instructions for cid unlock and Rom flashing: http://forum.xda-developers.com/showthread.php?t=1402104&page=2 especially from post 12.

thx for the help
hi bro thanks for helping me
just one question is that i download this ELF_USPL_1.17.0000 ver as u give me the link. there are few others ver also, so which u prefer i used this one first n then in future i can upgrade others.
and one another question is that before running this patch of uspl does i have to put onyx 6.0 in the same folder of this uspl or first i have to install this verson only n it has its customer rom
then i can update to onyx 6.0
thx in advance
plz guide me for this. as i dnt want to mess my mobile before i get ur proper guide lines thx once again.

I think you should read at least 10 pages so you feel comfortable with uspl procedure, last time I did it was 2 years ago... After you get 2.28 or 3.10 you can flash hspl and only then flash onyx.

hi bro
hi tito bro thanks for your guide lines i really appreciate for ur all the help you have given me, yeaterday first i install the uspl 1.17.0000 n then it went to update rom utility itself n then i could see it was showing version spl 1.17.0001 something n ipl 1.17.0002. then i see it reboot n went like the windows i had same one. then i flash the onyx n it took n install it completely. but i still want to know that can i still update to like 2.28 spl buz i have read ur comment n then i went to few pages of those n i see that most are saying to use 2.26 n then update to 2.28 spl n 2.26 ipl to get better speed and to have fast application run, so now can i do that spl 2.28 n ipl 2.26 update ?
and after i do that update does i have to flash onyx 6.0 again ?
thanks for your time

You are running too fast mate, you have to get higher SPL then upgrade to corresponding Hspl and only then install Onyx. Read the FAQ in Onyx thread!
Ps: you can directly upgrade to 2.28 SPL

hi
hi bro
well as u said i upgrade the spl to 2.28 but i dnt know still ipl is showing 1.17.0002 only, does that i have to install in another way, buz last time when i install spl 1.17.000 after update i see the ipl was showing 1.17.0002 but now when i update it to 2.28 spl. still ipl is showing the older ver only n not showing 2.27, or does its like i have to copy that .nbh file to that rom utility n replace with the one inside have n then update it?
n another problem is that b4 doing spl first time i forgot to take the backup of my original rom, so now i am afraid that if i do anything wrong maybe phone will stop completely working.

When using ruu make sure there's only one nbh, and as for backup, well it's too late to worry, think positive

thx
Hi bro
thx for your guide lines, ok now today i have updated ipl and now the version is showing
IPL : 2.27.0002
SPL : 2.28.0000
so now what next time i should do.
ok but one thing i want to tell u is that the windows my mobile boot is onyx only,
as i dint had back i dint took risk of formating n start to install all from first, so i am just doing updating as u guiding, so now as the ipl & spl is update, what step i have to do, pls let me know. so i will go n read n then take ur more guide lines to move ahead
thx alot in advance to helping me

[Q] HT ELF 0100 stuck at bootloader tricolor

IPL 1.15.0002
SPL 2.28.0000
thats what i got after i tried to upgrade to RUU_Elf_HTC_ARA_1.17.415.3B_4.1.13.47_02.98.90_BLUE_Ship . i know i got it CID locked again and cant fix this problem , i searched every bit over net about a solution but i faild im so piss off , my phone was t-mobile , any ideas pls i love this phone its a gift from my brother , regards and thx for ur time