Hello everyone.
I've created Individual CSC Packages - CWM flashable for i9300/i9305, click here for more info.
Now I've prepared test file for N7100 and I need someone to try if this method works with N7100/N7105 as I don't own this device
EFS backup is required (just in case if something goes wrong..)
CHECK WITH ROOT-EXPLORER IF "/efs/imei/mps_code.dat" IS PRESENT IN ROOT DIRECTORY:
1. if so flash it an report how it goes please
2. if NOT - DON'T USE IT !!!!! and REPORT it ASAP please
CSC_BTU_CWM - it'll change CSC code to BTU(UK) NO Factory Reset required!!
How to install it?? follow instructions from i9300 thread
Another thing is HD Voice on custom ROM, is dialing *#197328640# brings Service Mode?? If so, please check if WB-AMR status exists? Should be inside [UMTS]
If this method works, I'll change this Thread to the same as for i9300/i9305 with loads of CSC_CWM flashable files
Re: Tester NEEDED
djembey said:
Hello everyone.
I've created CSC changer for i9300/i9305, click here for more info.
Now I've prepared test file for N7100 and I need someone to try if this method works with N7100/N7105 as I don't own this device
EFS backup is required (just in case if something goes wrong..)
CHECK WITH ROOT-EXPLORER IF "/efs/imei/mps_code.dat" IS PRESENT IN ROOT DIRECTORY:
1. if so flash it an report how it goes please
2. if NOT - DON'T USE IT !!!!! and REPORT it ASAP please
CSC_BTU_CWM - it'll change CSC code to BTU(UK) NO Factory Reset required!!
Another thing is HD Voice on custom ROM, is dialing *#197328640# brings Service Mode?? If so, please check if WB-AMR status exists? Should be inside [UMTS]
If this method works, I'll change this Thread to the same as for i9300/i9305 with loads of CSC_CWM flashable files
Click to expand...
Click to collapse
It's not that I messed up but CSC changer shows blank box in front of sales code . Can you make one for India? I had myself edited the wanam lite rom to have India CSC by moving the required CSC files and change swconfig and cscversion file. Also the mps_code.dat has inu(that is for india). But still it shows blank.
If you could explain me how to check this wbamr thing. I couldn't figure out. I mean I want help but can't figure what you demand.
this is XXXDDDAAA
UtkarshGupta said:
If you could explain me how to check this wbamr thing. I couldn't figure out. I mean I want help but can't figure what you demand.
this is XXXDDDAAA
Click to expand...
Click to collapse
Thanks for quick response
First of all can you confirm is there "/efs/imei/mps_code.dat" in your root folder???? THIS IS MOST IMPORTANT TO ME!
WB-AMR is a codec responsible for HD VOICE feature. To make it work, CSC must match your network provider and also HD must be supported by network.
When I dial *#197328640# on my i9305, ServiceMode is activated and there's all technical info, just look for "WB-AMR status" (can be under [UMTS]) and click on it. If it's working you should see:
WB-AMR SETTING: ON
GSM WB: OFF
UMTS WB: ON
I can modify some entries if it doesn't work
CSC_INU_CWM try to flash with this update.zip
Re: Tester NEEDED
djembey said:
Thanks for quick response
First of all can you confirm is there "/efs/imei/mps_code.dat" in your root folder???? THIS IS MOST IMPORTANT TO ME!
WB-AMR is a codec responsible for HD VOICE feature. To make it work, CSC must match your network provider and also HD must be supported by network.
When I dial *#197328640# on my i9305, ServiceMode is activated and there's all technical info, just look for "WB-AMR status" (can be under [UMTS]) and click on it. If it's working you should see:
WB-AMR SETTING: ON
GSM WB: OFF
UMTS WB: ON
I can modify some entries if it doesn't work
CSC_INU_CWM try to flash with this update.zip
Click to expand...
Click to collapse
Yep mps_code.dat is at the place. But I don't think your method would work because I have replaced all of the files that are found in your zip. But it looks like it makes a nill CSC or I might just be doing it wrong.
As for the wbarm thing it is in WB-AMR status folder or whatever you call it which is 8th in service Mode and yeah it is off. But I don't want the HD voice nor do I know what it is but there is no harm in testing though.
this is XXXDDDAAA
Re: Tester NEEDED
Thanks for confirming.
People reported "Unknow" CSC but it's ROM related issue. Flash stock rom and all will be back to normal.
Do me a big favour and try my zip.
Use the CSC_INU
Ready to test !
CHECK WITH ROOT-EXPLORER IF "/efs/imei/mps_code.dat" IS PRESENT IN ROOT DIRECTORY:
OK it is present and it contains the text KOR (maybe for Korea)
I am on Wanalite v3.3 with xxdlk7 modem and kernel Perseus v34-2.
I did test the string *#197328640# and for my french Operator SFR status is OFF.
I did backup :
/efs/imei/mps_code.dat
/system/csc/contents.db
/system/csc/customer.xml
/system/csc/feature.xml
/system/csc/others.xml
/system/csc/sales_code.dat
/system/SW_Configuration.xml
/system/CSCVersion.txt
Can't find the files in /system/etc/.
Maybe you can make a version with XEF as my N7100 is not simlocked by operator.
Or tell me if I can edit the file directly /efs/imei/mps_code.dat
Ok, I go for the flash and come back !
nerfiaux said:
CHECK WITH ROOT-EXPLORER IF "/efs/imei/mps_code.dat" IS PRESENT IN ROOT DIRECTORY:
OK it is present and it contains the text KOR (maybe for Korea)
I am on Wanalite v3.3 with xxdlk7 modem and kernel Perseus v34-2.
I did test the string *#197328640# and for my french Operator SFR status is OFF.
I did backup :
/efs/imei/mps_code.dat
/system/csc/contents.db
/system/csc/customer.xml
/system/csc/feature.xml
/system/csc/others.xml
/system/csc/sales_code.dat
/system/SW_Configuration.xml
/system/CSCVersion.txt
Can't find the files in /system/etc/.
Maybe you can make a version with XEF as my N7100 is not simlocked by operator.
Or tell me if I can edit the file directly /efs/imei/mps_code.dat
Ok, I go for the flash and come back !
Click to expand...
Click to collapse
Don't worry about "etc", not important
Use this, it's Open French CSC_XEF_CWM
let me know how it goes, to check if it worked properly , use this app and compare your CSC with the one from *#1234#
Re: Tester NEEDED
djembey said:
Don't worry about "etc", not important
Use this, it's Open French CSC_XEF_CWM
let me know how it goes, to check if it worked properly , use this app and compare your CSC with the one from *#1234#
Click to expand...
Click to collapse
That's what I am saying I did almost everything but CSC changer doesn't shows it changed.
this is XXXDDDAAA
UtkarshGupta said:
That's what I am saying I did almost everything but CSC changer doesn't shows it changed.
this is XXXDDDAAA
Click to expand...
Click to collapse
There must be something wrong with your phone, as I said, it's happening to people who flashing their phones quite often, STOCK CSC changer getting stuck and doesn't work properly anymore. Use Odin, flash STOCK ROM, Factory Reset and all will be back to normal. Later you can root and flash any Custom ROM and your CSC will change every time you flash it with my update.zip
Why did you replaced files? I've asked to flash in CWM recovery or MOBILE ODIN PRO ....
Re: [CSC_CWM] Tester NEEDED :)
No I modified the flash file. I'll try your way.
this is XXXDDDAAA
Wb amr off
djembey said:
Don't worry about "etc", not important
Use this, it's Open French CSC_XEF_CWM
let me know how it goes, to check if it worked properly , use this app and compare your CSC with the one from *#1234#
Click to expand...
Click to collapse
Ok I did try the 1st zip (BTU) operator
Reboot Ok
The /efs/imei/mps_code was modified to BTU after reboot.
I did it too with the XEF.
I install the app Galaxy S / note /SIII CSC and checked that the CSC is XEF : OK
But the WB AMR is not ON
WB-AMR SETTING : OFF
GSM WB : OFF
UMTS WB : OFF
Re: [CSC_CWM] Tester NEEDED :)
Well can you make India too? I want to try as well.
this is XXXDDDAAA
nerfiaux said:
Ok I did try the 1st zip (BTU) operator
Reboot Ok
The /efs/imei/mps_code was modified to BTU after reboot.
I did it too with the XEF.
I install the app Galaxy S / note /SIII CSC and checked that the CSC is XEF : OK
But the WB AMR is not ON
WB-AMR SETTING : OFF
GSM WB : OFF
UMTS WB : OFF
Click to expand...
Click to collapse
Thanks! It works! Main job is to change CSC code - DONE! I'm relief....
Download XEF again, I've modified it for you. WB-AMR should be ON now
UtkarshGupta said:
Well can you make India too? I want to try as well.
this is XXXDDDAAA
Click to expand...
Click to collapse
Already did..... Look on 1st page....
never mind, here it goes again CSC_INU_CWM try to flash with this update.zip
The WB is disabled as standard, what's your Network Provider name/code?? I'll modify it to make it work
Re: [CSC_CWM] Tester NEEDED :)
Damn CSC changer still not show inu in sales code. Never mind could be wrong with my phone or maybe custom rom.
this is XXXDDDAAA
CSC xxdmb6
Maybe I have to try the SFR one ?
You will find the /System/CSC folder from the rom wanamlite v3.3 based on xxdmb6.
I shared it by mail on your donation address.
UtkarshGupta said:
Damn CSC changer still not show inu in sales code. Never mind could be wrong with my phone or maybe custom rom.
this is XXXDDDAAA
Click to expand...
Click to collapse
Mate, you need to wake up!! It showing INU because I've gave you INU!!!
Use BTU or XEF or any other just to check if your CSC changed. Later use INU to go back to CSC for India...
nerfiaux said:
Maybe I have to try the SFR one ?
You will find the /System/CSC folder from the rom wanamlite v3.3 based on xxdmb6.
I shared it by mail on your donation address.
Click to expand...
Click to collapse
Here it comes, CSC_SFR_CWM
Re: [CSC_CWM] Tester NEEDED :)
Csc changed to sfr but still wb amr set to OFF
Envoyé depuis mon GT-N7100 avec Tapatalk
nerfiaux said:
Csc changed to sfr but still wb amr set to OFF
Envoyé depuis mon GT-N7100 avec Tapatalk
Click to expand...
Click to collapse
Hmm... As I said, HD VOICE activating is tricky, it's a NETWORK FEATURE so not always can be enabled from phone level... everything is enabled in your customer.xml file....
Few people reported that it suddenly started working, maybe it needs a bit of time, network activation....
Thanks anyway for testing it for me. CSC is changing and that's MOST important to me
cheers
Re: [CSC_CWM] Tester NEEDED :)
nerfiaux said:
Ok I did try the 1st zip (BTU) operator
Reboot Ok
The /efs/imei/mps_code was modified to BTU after reboot.
I did it too with the XEF.
I install the app Galaxy S / note /SIII CSC and checked that the CSC is XEF : OK
But the WB AMR is not ON
WB-AMR SETTING : OFF
GSM WB : OFF
UMTS WB : OFF
Click to expand...
Click to collapse
I had to do a factory reset and after changing CSC to activate HD voice (wb-amr) both on my note II and galaxy S III.
Sent from my GT-N7100 using Tapatalk 2
colman1982 said:
I had to do a factory reset and after changing CSC to activate HD voice (wb-amr) both on my note II and galaxy S III.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
That's the thing, using my method allows changing CSC and enabling WB-AMR (HD VOICE) Without Factory Reset
The only problem is that it's a NETWORK feature and not all providers supporting........
Related
GT-I9000_I9000JHJP8_I9000PTRJP8_I9000JHJP5_OIP-MID
Code version: I9000JHJP8
Baseband version: I9000JHJP5
CSC version: I9000PTRJP8
Converted to a "middle" package so there will be no problems when flashed with Odin (re-partition possible).
Use with 512 mapping (.pit) if necessary.
I know from past symbian phones that certain israel providers use 850 on 3g.
Does this modem support that frequency and if not can you find any froyo modem for 9000m or 9000t cause those do.
Anyways thanks for this.
Sent from my i9000M
I love this thread. He has converted it to a middle package.
Richthofen said:
GT-I9000_I9000JHJP8_I9000PTRJP8_I9000JHJP5_OIP-MID
Code version: I9000JHJP8
Baseband version: I9000JHJP5
CSC version: I9000PTRJP8
Converted to a "middle" package so there will be no problems when flashed with Odin (re-partition possible).
Use with 512 mapping (.pit) if necessary.
Click to expand...
Click to collapse
In the title, can you change [R] to [ROM]? R isn't understood by many people.
very very nice.
i've been using this version for few days now (dumped from another orange israel device)
what's hot
RTL support is nearly perfect:
gmail reversed hebrew lables is fixed
mail app now aligns hebrew text to the right as should
sms hebrew perfect
if location set to hebrew dialer has heb/eng smart dialing search
swype supports heb/rus/arabic/english
also includes samsungs snap n' go program
what's not
android menus on hebrew are ugly as hell since alignments is to the left.
calendar shows all event from the left.
usb debugging mode is translated as "fix bugs in usb"
speed wise i didn't notice any difference from jpo.
gps looks to be the same, sucks in my tracks, works with waze.
csc contains some garbage from orange, can be easily removed with titanium and root.
ragin said:
In the title, can you change [R] to [ROM]? R isn't understood by many people.
Click to expand...
Click to collapse
release. bla-bla
can someone please extract SWYPE and create an update.zip from it?
THANX!!
i can do it, i already did actually...but.. as far as i know it's 2 files, swype.apk and libswype
but i also see swype.apk.odex
do you need it also?
in any case u can always try just backup your files:
http://www.2shared.com/file/6RDCe52q/swype-285012867.html
apk to system/app
lib to system/lib
Good to see you in Froyoland Richthofen - WB
apk and lib in update.zip
not sure if it works but you can try
Thanks bro!!!
wonder why the archive file extension is .exe
[EDIT] Never mind. It's the 7zip self extractor.
Richthofen said:
GT-I9000_I9000JHJP8_I9000PTRJP8_I9000JHJP5_OIP-MID
Code version: I9000JHJP8
Baseband version: I9000JHJP5
CSC version: I9000PTRJP8
Converted to a "middle" package so there will be no problems when flashed with Odin (re-partition possible).
Use with 512 mapping (.pit) if necessary.
Click to expand...
Click to collapse
sorry for being a noob, but can I ask what it means when it is converted to a middle package?
(I have a fixed 3BR phone - does this have anything to do with the low package you talked about that can bring back the no 3br fix?)
Sorry if the question makes no sense .. trying to find my hands and feet in this
I wonder if this has better radio. JPP eats a lot of power. Going to try it. Same baseband like UK and Asia?
Lot of operator crap inside!. 997 Quadrant. Not so specially speedy. JPO still rules for me.
guys all froyo builds are same speed...stop this jpa > jpo >jp* thing
thanx for the swype extract!
is there a way to remove arabic and russian?
does is really bother you? you can change language quicly by swyping from the swype icon to Q...
What is the build date on this puppy? Any newer than JPO/JPA, or is this just appears to be another carrier customized version of those?
Moxen21 said:
sorry for being a noob, but can I ask what it means when it is converted to a middle package?
(I have a fixed 3BR phone - does this have anything to do with the low package you talked about that can bring back the no 3br fix?)
Sorry if the question makes no sense .. trying to find my hands and feet in this
Click to expand...
Click to collapse
From Thread 823635
"Originally Posted by Richthofen . . .
The firmware was originally a high package, meaning it is a update patch.
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
I converted it to a middle level package, which can be flashed with Odin MDL with re-partition enabled.
It is now a OSP (Odin Separate Package) rom, so the CSC can be selected separately. It was originally a OIP (Odin Integrated Package) so the CSC was fixed to the one used in the original release (OXA in this case)."
Can someone please upload the latest firmware avaialable for spica that has romanian language and it is unbranded. i installed a french firmware but it doesn't have ro language.
boditza said:
Can someone please upload the latest firmware avaialable for spica that has romanian language and it is unbranded. i installed a french firmware but it doesn't have ro language.
Click to expand...
Click to collapse
original firmware but eclair 2.1
http://www.multiupload.com/VS9QWXDV4W
yamen.meddeb said:
original firmware but eclair 2.1
http://www.multiupload.com/VS9QWXDV4W
Click to expand...
Click to collapse
thank you for that but it does not ave romanian. installed I570EXXJH7 and it has romanian, but its branded with 3-4 apps . its ok i guess, at least i got the desired language
boditza said:
thank you for that but it does not ave romanian. installed I570EXXJH7 and it has romanian, but its branded with 3-4 apps . its ok i guess, at least i got the desired language
Click to expand...
Click to collapse
I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1
I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
3.which one do you recon is enough if english is used as the primary language as i have already have Jh1 version
boditza said:
installed I570EXXJH7 and it has romanian, but its branded with 3-4 apps
Click to expand...
Click to collapse
Just flash without CSC (cache.rfs) -> no branding at all. AFAIK the pre-configured APNs are in there also, so you'll have to configure those manually, even if you didn't before.
boxy44 said:
I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1
I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
3.which one do you recon is enough if english is used as the primary language as i have already have Jh1 version
Click to expand...
Click to collapse
You just tick one package option.
New .ops file you can find at the bottom of samfirmwares page.
Gud Luck!
fallenguru said:
Just flash without CSC (cache.rfs) -> no branding at all. AFAIK the pre-configured APNs are in there also, so you'll have to configure those manually, even if you didn't before.
Click to expand...
Click to collapse
I already have jh7 installed. will it still work if i reflash it without csc? apns are for acces point names? if they are i don't need them since they are from south africa operators and i use mainly wifi. i think that with the apps the operator installed in the firmware the memory is drasticly reduced so i can install only 4-5 apps then i get the low memory message.
p.s. does anyone know why the low battery sound isn't present?? i just get the on screen message in wich it tells me i have under 15% left but no message tone whatsoever. just shuts down and never tells me
Hello Everyone!
I made a custom firmware based on S8530DDLC2_S8530ODDLC2_INU, and I got a problem:
when I touch the screen, it responds about one cm upper.
Any solution?
Anybody?
can you please state what you were trying to do ??
And what you exactly did ???
Best Regards
mylove90 said:
can you please state what you were trying to do ??
And what you exactly did ???
Best Regards
Click to expand...
Click to collapse
I made a costum firmware for wave 1, and it works fine, and then I decided to do it for wave 2, so I just change the .bin files in csc rc1 shpapp and ffs, to wave 2 .bin files.
And all works fine, but this is my only problem, the touch response about one cm upper from the point that I press.
Clear?
Use WinMerge to find out if there is any different files
I guess you may find difference in RC1 dump but not in CSC
I always recommend editing the FW itself & not taking the files just as you did
let me know if you find your bug
Best Regards
mylove90 said:
Use WinMerge to find out if there is any different files
I guess you may find difference in RC1 dump but not in CSC
I always recommend editing the FW itself & not taking the files just as you did
let me know if you find your bug
Best Regards
Click to expand...
Click to collapse
I dont know why but I flashed my fimware with the orginal ffs file and it works fine.
Thank you for your answers
Another problem that I found, I can't backup/restore by kies.. and after I flashed my firmware with original shpapp I was able to do that.
HELP??
hi all.
link 4 Tools and driver
http://www67.zippyshare.com/v/65155760/file.html
here are some EUROPEAN GDR2 ROMS (data sense is include):
(only flash if your csc code is available)
http://hotfile.com/dl/233814859/a432057/I8750XXBME1_OXABME1_R_Signed_WP8.rar.html
(thx to spalvin, here are a Gdr2 Rom with More csc codes!)(dont use costum csc in this download Folder if you not know for what it is!))
https://disk.yandex.ru/public/?hash...UI5Sv3ogkMx+ycwSplwl+DA=:/Прошивка/&locale=ru
it Looks like this Rom is for the Italien market (not sure) but you can choose by the flashtool Default csc DBT, ATO,BTU,ITV,XEF,XEO
step by step instruction:
1. Download Flashtool+Driver and ROM with CSC file.
2. Install Driver on your PC (i had problems with win 8.1 X64, win7 X64 installation fine)
3. Put your phone in Download modus
Shut down your phone
press and hold volume up + camera button and press shortly power button (still hold volume up and camera buttons!)
download modus must appear.
4. Start flashtool and load Rom (.WP8 file) and csc file into the flashtool
in the yellow folder load Rom. (.WP8 file)
in the green folder load CSC file
5. Choose your default CSC Code under DL Options-->CSC sale Codes. (for example DBT is Germany)
6. Plug in your phone to your PC over USB cabel.
7. Press start in the flashtool (if you cant press start, something wrong with drivers or phone--PC connection)
Flashtime about 10 min....
I am NOT responsible for any damage to your device!
You do everything on your own risk!
Interesting... I wonder what GoodDayToDie thinks about this
I took a quick look but haven't investigated yet. Unfortunately, I have the other model of ATIV S - the T899M - and there's no way I'm going to risk flashing an I8750 ROM onto it; that never ends well. On the other hand, I *would* be very interested in Samsung WP8 flashing tools. One of the biggest problems my phone has is that its firmware is badly outdated and there seems to be no updates for it (the I8750 has had at least two updates so far, one of which fixed a known issue that also affects my phone and breaks WiFi tethering).
Obviously, the interest in custom ROMs is also quite significant. We'll have to wait and see about that, though.
GoodDayToDie said:
Obviously, the interest in custom ROMs is also quite significant. We'll have to wait and see about that, though.
Click to expand...
Click to collapse
I think that the ativ's bootloader is locked. Huawei coders could miss checking a signature, but not samsung, I think. But who knows?
Oh, it's undoubtedly locked. All WP8 devices are supposed to have locked bootloaders. However, that doesn't mean we can't find bugs in those systems to let us past the signature checks, or to let us replace the bootloader entirely, anyhow. This was possible (via various approaches) on devices from multiple different OEMs (including Samsung) with WP7.
I got the ROM if anyone need it.
please
djtonka said:
I got the ROM if anyone need it.
Click to expand...
Click to collapse
can you please send me the link to download this rom
i have a samsung ativ s and want to flash it
many thanks in advance
mega!
megasounds said:
can you please send me the link to download this rom
i have a samsung ativ s and want to flash it
many thanks in advance
mega!
Click to expand...
Click to collapse
I am at work now so will upload on free server later
djtonka said:
I got the ROM if anyone need it.
Click to expand...
Click to collapse
yeah please post a link. i will edit it in the first post i already have found GDR2 roms and post links.
Flash Tool and ROM Download Links can be found here: http://www.pocketpc.ch/samsung-ativ...8-8-0-10327-77-fuer-ativ-s-2.html#post1790079
Seems people have already tried it out and it works fine on their I8750s. Haven't tried it myself yet as I'm still downloading the ROM.
tooly26 said:
hi all.
link 4 Tools and driver
http://www67.zippyshare.com/v/65155760/file.html
here are some GDR2 ROMS (data sense is include):
http://hotfile.com/dl/233814859/a432057/I8750XXBME1_OXABME1_R_Signed_WP8.rar.html
http://www.moulnisky.com/index.php?dir=Samsung/Firmwares/GT-I8750/
it Looks like this Rom is for the Italien market (not sure) but you can choose by the flashtool Default csc DBT, ATO,BTU,ITV,XEF,XEO
i will make a step by step instruction later if i will get time!
I am NOT responsible for any damage to your device!
You do everything on your own risk!
Click to expand...
Click to collapse
Thanks you very much, waiting for the manual :good:
I'd like to flash, but I want some feedbacks from this forum before...
I got GT-I8750_XXAMB1_R_signed.wp8 so is worth posting?
djadry said:
I'd like to flash, but I want some feedbacks from this forum before...
Click to expand...
Click to collapse
Well, I just install it. My phone is German, so I have chosen DBT csc. Working fine. Thanks to all!!
Rotry83 said:
Well, I just install it. My phone is German, so I have chosen DBT csc. Working fine. Thanks to all!!
Click to expand...
Click to collapse
Do you have all languages on it?
djtonka said:
Do you have all languages on it?
Click to expand...
Click to collapse
Yes, has all languages and is free. I'm Spanish, for example :good:
Please write down current OS and firmaware version and what exacly link you used?
djtonka said:
Please write down current OS and firmaware version and what exacly link you used?
Click to expand...
Click to collapse
Rom: GT-I8750XXBME1
I use this link: http://www.moulnisky.com/index.php?dir=Samsung/Firmwares/GT-I8750/ITV/
Version S.O: 8.0.10327.77
The rom XBME1 is free and is Italian but CSC allows many countries.
Sorry for my English
And you have radio FM, DataSence, etc?
djtonka said:
And you have radio FM, DataSence, etc?
Click to expand...
Click to collapse
The radio is not included. Data sense, etc is installed. Ativ Beam works fine
hey , this tutorial show how to interop unlock your phone with sd card support and without windows phone internal
ya its extra+info's hack...again work after some kinda trick
step-1 ) uninstall extra+info from the phone storage by changing date+time to 2200yr
step-2) set new install app to sd card into the storage setting app
step-3) change your region to china and reboot phone
step-4) register your phone for devloper using devloper register app
step-5) open the store and download(nokia update) http://www.windowsphone.com/s?appid=443f4d2f-4182-43ea-b732-841a2ccbdd7b
step-6) open nokia update app . you can see the two extra+info and extra+info(universal) .now download extra+ info ...at that time store dont give popup like "this app must install on phone storage" .by this hack you can install into SDcard..:highfive:
so, we are ready to interop
step -7) set storage sense to phone
step-8) download and sideload CustomWPSystem6.0 on phone storage http://forum.xda-developers.com/windows-phone-8/development/xap-customwpsystem-patch-xaps-wpsystem-t2975419
step-8) download vcreg v1.2 and put root directory of sdcard http://forum.xda-developers.com/windows-phone-8/development/xap-vcreg-lumia-reg-editor-live-interop-t3135326
step-9) open CustomWPSystem set the sdcard permission>>> chose Extra+info as target app>>>select vcreg.xap>>>hit apply
step-10) open setting app>>>like"D:\WPSystem\apps\23___" and open template(...)>>>hit apply live/permenent intrope unlock..
done
change u r region to original
MOD
extra+info : {4C2AAE0A-5E94-4D47-99E3-2608E34C536A}
tutorial
https://youtu.be/s0U8x3o_oFo
I cannot sideload CustomWPSystem6.0 with "http://forum.xda-developers.com/wind...ystem-t2975419". Any solution?
hahaha1111 said:
I cannot sideload CustomWPSystem6.0 with "http://forum.xda-developers.com/wind...ystem-t2975419". Any solution?
Click to expand...
Click to collapse
are you register your phone for devloper using "Windows Phone Developer Registration 8.1"
then you can sideload or install 2 xap
A AJAY said:
are you register your phone for devloper using "Windows Phone Developer Registration 8.1"
then you can sideload or install 2 xap
Click to expand...
Click to collapse
okay now,thx. But why no people reply your post?The post is good
hahaha1111 said:
okay now,thx. But why no people reply your post?The post is good
Click to expand...
Click to collapse
actually ,
---> almost lumia which have 1GB or more ram is running on windows mobile 10. so,its easy to intrope by intrope tool.
--->remaining 512 mb ram device used this trick before but after arrive windows phone internal its easy to introp and boot unlock.
--->but if u dont need to to boot unlock then you can use this method ..its easy but lts lengthy. so most of them use WPI....
amd also its a good tool..i also used that to introp unlock....but i posted this because it can helpful to someone.
:highfive:
app not available error
app not available error is popping up when trying to install extras + info app
ajaikumarnadar said:
app not available error is popping up when trying to install extras + info app
Click to expand...
Click to collapse
Changed your phone region to china...?
Yup i did it.. I followed all your steps as mentioned in the tutorial
ajaikumarnadar said:
Yup i did it.. I followed all your steps as mentioned in the tutorial
Click to expand...
Click to collapse
After step 1 shouldn't the phone be reset to actual date i. e. 2016? With that you should be able to download extras+info.
malvo26 said:
After step 1 shouldn't the phone be reset to actual date i. e. 2016? With that you should be able to download extras+info.
Click to expand...
Click to collapse
it showing up an error while trying to developer unlock the phone in my lumia 630
for more detail see the attached pic !
A AJAY said:
Changed your phone region to china...?
Click to expand...
Click to collapse
after everything done finally while installing the extras + info app this error comes up refer the screenshots please !
ajaikumarnadar said:
after everything done finally while installing the extras + info app this error comes up refer the screenshots please !
Click to expand...
Click to collapse
please watch tutorial....its working... i have to rollback from wm10 to 8 to make tutorial :good:
Nice tutorial BUT ...
Sorry, but no. It's NOT working.
I am also unable to install Extras + Info. Same error as in post 11.
Please give us working settings for region/language etc so we can install the app in step 6 of your tutorial.
BTW I'm trying to do this on 640 XL, OS 8.1.2
mike640 said:
Sorry, but no. It's NOT working.
I am also unable to install Extras + Info. Same error as in post 11.
Please give us working settings for region/language etc so we can install the app in step 6 of your tutorial.
BTW I'm trying to do this on 640 XL, OS 8.1.2
Click to expand...
Click to collapse
Region: China
Language/speech: English (India)
This combination may worked for me
Switch your phone language to English (in) then try it......ot must be work
A AJAY said:
please watch tutorial....its working... i have to rollback from wm10 to 8 to make tutorial :good:
Click to expand...
Click to collapse
i am sorry to say .... but it's not working with respect to your video.... in lumia 630 with windows phone 8.1 denim update... i think it may be patched my microsoft... what do you say ajay about this ? actually, i checked the WMManifest.xml file its conatins are kind of encoded... maybe, that is the real problem behind this.. and maybe.. it is not working with all phones... maybe your phone might not be patched for that bug....
ajaikumarnadar said:
i am sorry to say .... but it's not working with respect to your video.... in lumia 630 with windows phone 8.1 denim update... i think it may be patched my microsoft... what do you say ajay about this ? actually, i checked the WMManifest.xml file its conatins are kind of encoded... maybe, that is the real problem behind this.. and maybe.. it is not working with all phones... maybe your phone might not be patched for that bug....
Click to expand...
Click to collapse
First....
Don't rename apps>appsxx...and open wmmanifest.xml....n u can see its not encoded.....
After renaming its encoded....
So you have to past vcreg to that folder without rename this folder ...
If you rename then its always show loading.....bcz you put file don't decode because it actually not encoded......
A AJAY said:
First....
Don't rename apps>appsxx...and open wmmanifest.xml....n u can see its not encoded.....
After renaming its encoded....
So you have to past vcreg to that folder without rename this folder ...
If you rename then its always show loading.....bcz you put file don't decode because it actually not encoded......
Click to expand...
Click to collapse
does this method works in other apps like mixradio or preview for developers.
i couldn't install that extra + info app it's showing up that " it's not available in my region or software is not upto date. " i changed the region to china as mentioned but its not working !
--------------------------------------------------------------SEE THE SCREENSHOTS------------------------------------------------------
ajaikumarnadar said:
does this method works in other apps like mixradio or preview for developers.
i couldn't install that extra + info app it's showing up that " it's not available in my region or software is not upto date. " i changed the region to china as mentioned but its not working !
--------------------------------------------------------------SEE THE SCREENSHOTS------------------------------------------------------
Click to expand...
Click to collapse
Install language: English (India)
Set the combination of region and language
Region: China
Language: India
Restart phone ...
Try to install extra+info
Language is also important for this hack...u also need to change it
A AJAY said:
Install language: English (India)
Set the combination of region and language
Region: China
Language: India
Restart phone ...
Try to install extra+info
Language is also important for this hack...u also need to change it
Click to expand...
Click to collapse
i already have english(india) language installed.... i mean its my default language..
even though i tried to do it again but didn't work... and issue persists.. " extras + info not available for my phone "
We do not have the whole picture here
A AJAY said:
Install language: English (India)
Set the combination of region and language
Region: China
Language: India
Restart phone ...
Try to install extra+info
Language is also important for this hack...u also need to change it
Click to expand...
Click to collapse
I have followed your instructions to the letter, but setting region, phone language and speech language is not enough.
I think that phone model & country variant might be responsible for the problem. I have 640XL RM-1067 059X1H4 country variant.
OS is window phone 8.1 update2 , latest for the 640XL.
What phone are you using? Model, country variant and operating system version?