Hey guys,
I have LG Optimus L7, right after info about Jelly Bean I wanted to flash it. While in flash there was errors becouse I didn't installed new drivers (ver with recovery etc.). After that I have tried to install MIUI (get through installation without any troubles), but after booting into MIUI I think every possible app crashed, and now after holding vol up+power I can't even boot into Emergency Mode. After every installation I did every possible wipe in recovery. Right now my phone i working on CM10 but it can't mount SIM card and speakers even headphones doesn't work. PLZ help me. Thanks in advance.
PS. sorry for my bad Eanglish.
Odp: [P700]Can't boot phone into Emergency Mode
Made IT XD. Got into emergency right after activating reboot in Phone (installed backup in CWM) and finally instalation went without any problems.
Wysyłane z mojego LG-P700 za pomocą Tapatalk 2
How do you got the emergency mode? I stuck in recovery mode
Do you have any rom installed? If not then try to install. If yes turn on your phone, hold power button, chose reboot and hold buttons to get into emergency mode. This worked for me. Sorry for bad English and good luck.
Wysyłane z mojego LG-P700 za pomocą Tapatalk 2
Related
Hi, mam problem z moim Nexus 7. I installed Clemsyn's Elite Kernel (UNDERVOLTED), and system has stopped working.Android does not start, it shows only the Nexus logo. Restore to default in recovery not work and do not know how to fix it now tablet.
Please help me. I'll send a beer (paypal)
Restore factory image.
Sent from my SPH-D710/Nexus7 using Tapatalk v2.4.1
If you only flashed a new kernel, it should be sufficient to flash the original kernel again. If recovery is not working, out can do that in fastboot mode. If you do not have the a backup of your kernel, you can extract it from the factory image.
Sent from my Nexus 7 using xda app-developers app
You could use the Nexus toolkit to flash stock rom. Here's the link: http://forum.xda-developers.com/showthread.php?t=1809195
laki_luk said:
Hi, mam problem z moim Nexus 7. I installed Clemsyn's Elite Kernel (UNDERVOLTED), and system has stopped working.Android does not start, it shows only the Nexus logo. Restore to default in recovery not work and do not know how to fix it now tablet.
Please help me. I'll send a beer (paypal)
Click to expand...
Click to collapse
Connect to a computer USB with the original cable that it came with. Then turn on by pressing buttons to enter vootloader (power button+volume down button). If it doesn't work, turn it off and give it 3 to 5 minutes and try again. Try this about 10 times. Lmk how it goes.
I rooted phone nicely. Then tried to flash the recovery through the CWM app, and after finishing installing, the app rebooted the phone, but it never booted to the menu. The phone worked fine, though. After, I found the new firmware update V20W_00.KDZ and tried to install it through the KDZ_FW_UPD app on the computer. When the program finished doing the process and showing me a message it has suceessfully finished, the phone tried to boot. It displayed the LG logo and the sound that comes with the animation. It stayed there for an hour. Phone can't boot. I can perfectly go through the emergency mode, and misteriously I can now go to the recovery CWM and emergency mode, too. Besides, when phone's completely off, it shows the charging battery animation when plugged to power adapter. Is there a way I can install any rom or something else from the recovery? I already tried the LG mobile support tool, but after downloading the update, it seems it has some sort of connection problem with the phone even though it's on emergency mode. HELP!
Hello,
Hard reset.Search on google.
Sent from my LG-P700 using Tapatalk 2
bogdan109 said:
Hello,
Hard reset.Search on google.
Sent from my LG-P700 using Tapatalk 2
Click to expand...
Click to collapse
Dude, thanks! It worked and can't understand why I have a newer android version, f**k!
What version do you have now?
Sent from my LG-P700 using Tapatalk 2
Sorry if the problem was written about before, but I've been looking through this forum and google for two days already and I've really run out of ideas. I had bought an used GT 540 from a friend and it worked remarkably well when I flashed it to SDSL 4.0 After having fun with learning the smartphone, since it was my first one, I decided to switch to it as my main phone.
First I wanted to take my simlock off, since it was locked to Orange (PL) and I'm in another network. I've read that it's possible to unlock phones only on stock ROMs, so I decided to use LG Support Tool for it (which I swear to never use again). It said that a new version is available and has flashed my phone to V20B.
Here the problems begin, because the boot is looping at the Android logo. The animation is playing for around half a minute, pauses for a half of a second, then the screen goes black and it appears again.
I've tried to flash the phone using KDZ_FW_UPD_EN and various ROMs in "download mode" by pressing vol - and power buttons.
The first few times it gave me an error:
13:55:00 : Smart : wParam = 100, lParam = 6
13:55:00 : Step : Upgrade Error error code =6
Click to expand...
Click to collapse
but for the past few times it seems to have completed successfully.
I don't know how to enter fastboot, it's possible that it's been removed along when I flashed the phone using the LG app.
I'm new to Android in general, what other info should I provide to help troubleshooting?
hey
to enter fastnoot u need to press camer(hold long)+ power button
if this dont work search on the google a kdz file with fastboot
flash it via KDZ UPDATER 3QGCT and CS_Eemregency try it without battery and simcard :d
Wooby said:
to enter fastnoot u need to press camer(hold long)+ power button
if this dont work search on the google a kdz file with fastboot
flash it via KDZ UPDATER 3QGCT and CS_Eemregency try it without battery and simcard :d
Click to expand...
Click to collapse
Thanks a lot I wasn't sure of the combination or thought that I checked it earlier and it didn't work.
I've managed to flash a fastboot ROM and then use fastboot to wipe the partitions. Afterwards I flashed the stock ROM (if anybody's curious, it's called FranceOrangeV20C_Fastboot.kdz). Apparently the wipe fixed the bootloop problem along the way, the data on the partitions must've conflicted with the stock rom, not allowing it to boot.
Nice too hear it
Wysłane z mojego GT-540 przy użyciu Tapatalka
hello guys, my milestone 2 has bricked on bootloader, i tried to pass sbf vivo 2.3.6 original rom from him, but when finished my milestone as reboot on bootloader again, and i remove my baterry and input again and he his turn on again on bootloader without i'm turn on my cellphone.
my milestone has bricked with i am try to put CM 10 but i'm found an article and says my original rom's don't do this.
sorry for bad english, i need a help..
thanks
adding a reply, when i finished to pass cm10 from recovery, i have made a wipe/data and cache, and put to reboot in recovery, after this my cell is bricked . i'm tryed to put dowgrade bl = 3 via sbf, i tried to put the original rom vivo 2.3.6 and nothing works . my cellphone always reboot on bootloader
Try to enter in boot menu, after flash vivo sbf 2.3.6, when turning on you hold x from the keyboard, or @, than you must see a "!" after see it pull volume down, you have to see a option to do a factory reset, do it. Than rebot.
I did it a loot!
Any problem ask again.
Sent from my Xperia SP using XDA Free mobile app
but i cannot do this, because after flash sbf rom vivo, my milestone 2 reboot on bootloader mode again, i remove my batery and insert again and reboot again, if i not touch any bottom to power on. i think no have soluction about this problem :/ thanks for help !!
rapha34 said:
but i cannot do this, because after flash sbf rom vivo, my milestone 2 reboot on bootloader mode again, i remove my batery and insert again and reboot again, if i not touch any bottom to power on. i think no have soluction about this problem :/ thanks for help !!
Click to expand...
Click to collapse
hi, same here, im rebooting whit x pressed, doing everithing on the menu, whipping cache... whipping data... doing reboot.... Still bricked.
Now i'm trying this: http://forum.xda-developers.com/showthread.php?t=1437682
Hello guys!
After upgrade my phone to Android 7 It falls into a bootloop. Recovery mode not work, and not have debbug mode enable, I flashed the rom stock of the same Android versiom but didn't work! Someone can help me please??
LucasSartori said:
Hello guys!
After upgrade my phone to Android 7 It falls into a bootloop. Recovery mode not work, and not have debbug mode enable, I flashed the rom stock of the same Android versiom but didn't work! Someone can help me please??
Click to expand...
Click to collapse
I JUST got this same issue as well. Is it a t1625_13mp xt1625 athene_retusa_cust?
My phone is xt1626 athene_13mp ... Do you have some idea of how solve this problem?
LucasSartori said:
My phone is xt1626 athene_13mp ... Do you have some idea of how solve this problem?
Click to expand...
Click to collapse
Not yet. I've been on customer support and they redirected me to this:
ICANT ROMVE LINKSmotorola-mobility-en-in.custhelp.com/app/answers/prod_answer_detail/a_id/110826/p/30,6720,9686
It hasn't worked for me though. If I try to go to recovery mode a black screen with the android logo and a red triangle appears with the text "No command"
Did this work for you?
Not work for me too, if I try to go recovery, show the Motorola logo then the phone fall again into a bootloop ?
LucasSartori said:
Not work for me too, if I try to go recovery, show the Motorola logo then the phone fall again into a bootloop [emoji29]
Click to expand...
Click to collapse
Did you get your phone working again. O have the same problem with my G4. Constant bootloop. Even in recovery mode.
Wysłane z mojego SM-G955F przy użyciu Tapatalka