Database Users

Milestone 2 reception problems

Hi. ive flashed the latest MIUI rom on my Milestone 2 and since that i have really poor reception problems which i never had with the stock or cm7. ive read about baseband and stuff and found on the Defy forum an apk for baseband switch. problem is i dont know if i should tamper with it without some knowledge about it. can anyone plz help me?

from what i gather i need to change my baseband to 900/1800 but have no clue about how to do that

Everytime I change the ROM my MS2 is using I change the baseband, because I need to have 3g in 850MHz. Install the Milestone 2 Baseband, change the baseband and you're good to go, you only need to have a rooted MS2.

i chose the EU baseband but it has no effect

[Q] CM9 Correct Baseband For India

Hi all, I'm new to this so go easy please!
I am travelling in India and cannot get a data signal, only normal calls/texts.
Can you tell me which baseband I should select from the baseband switcher in advanced settings (Defy Parts)? I don't see an option for India...
I am running Eppy's CM9 13-Jun-12 & CM7 Froyo Kernal.
Thanks in advance.

Select southeast Asia 3.4.3-331. If the settings doesn't persist, then install bbswitcher(you can find the thread in dev section) and use that baseband. Enjoy.
Sent from my MB526 using XDA App

Thanks, tried both, but with no luck, also tried other southeast Asia baseband's and China baseband's without success...
Any other ideas?
Sent from my MB525 using XDA

Default cee-europe also works actually. Are the settings persistent, did you try installing baseband switcher?
Sent from my MB526 using XDA App

Yes tried the baseband switcher app also. What do you mean by are the settings persistent?
I also tried a full wipe, flash sbf & reinstall CM9 with latest 13-Jun kernel, still same problem...
Sent from my MB525 using XDA

Baseband Switcher V 4.1 | Signal intelligent monitoring
This version support show the dBm asu to you.
THIS Baseband solve u r problem
1. Support English well.
2. Adjust the layout file
3. Add Tab icon and un-selected effect of selected effect
4. Add some new baseband config
5. Optimized code for each module
6. Modified the execution order and the interface
7. Adjust the configuration of the prompt box displays, more intuitive
8. Add Confirm boxes to prevent misuse verification.
9. Adding real-time display the current signal strength to facilitate the players view
10. When the baseband is not displayed when the unknown is identified
11. When a user accidentally deleted the baseband configuration, the assistant can provide the baseband recovery.
http://forum.xda-developers.com/showthread.php?t=1203297

use china 850Mhz/2100Mhz baseband...it works

International 900/2100 works for me
in the list select " International" mode it works for me..

green.jersey said:
Hi all, I'm new to this so go easy please!
I am travelling in India and cannot get a data signal, only normal calls/texts.
Can you tell me which baseband I should select from the baseband switcher in advanced settings (Defy Parts)? I don't see an option for India...
I am running Eppy's CM9 13-Jun-12 & CM7 Froyo Kernal.
Thanks in advance.
Click to expand...
Click to collapse
It depends on your provider. what provider are you using?

Thank you for the replies everyone.
Unfortunately I have tried all of the suggestions and I still can't get the data connection to work.
My provider is T-Mobile UK. Perhaps they are blocking the data connection? I've never had a problem in other countries though...

Than its not your baseband. Contact your provider.

Defy baseband query
Hey folks,
I have changed the baseband selection option to South East Asia 3.4.3-331.
After this I am getting dedicated mobile network without any disruptions.
But unfortunately after this change when I accept any incoming call or make any call then I am not able to talk(The other person is not able to hear me and I am not able to hear another person voice).

Settings for Base band switcher in Defyparts in quarx cm10 in india

hi,
I am having data connectivity problems with my defy. It periodically loses data connectivity and even switching off and switching on of the data toggle isnt helping. I have to restart every time i have to connect to net and then eventually it again looses the connection after sometime. So i am wondering it might be some problem with my settings in base band switcher.Quarx Cm10 dont have india in the South east asia region. So can any one suggest the settings for india? Also if some one else also faced the same problem kindly suggest how you overcome it.
Thanx in advance.
My Defy is Red lens running 28 th Aug Quarx build of Defy+

adix149 said:
hi,
I am having data connectivity problems with my defy. It periodically loses data connectivity and even switching off and switching on of the data toggle isnt helping. I have to restart every time i have to connect to net and then eventually it again looses the connection after sometime. So i am wondering it might be some problem with my settings in base band switcher.Quarx Cm10 dont have india in the South east asia region. So can any one suggest the settings for india? Also if some one else also faced the same problem kindly suggest how you overcome it.
Thanx in advance.
My Defy is Red lens running 28 th Aug Quarx build of Defy+
Click to expand...
Click to collapse
Hey install baseband switcher.. i have defy and had same issue. flashing baseband switcher and restart the phone after selecting India fixed the issue.

Rodefy said:
Hey install baseband switcher.. i have defy and had same issue. flashing baseband switcher and restart the phone after selecting India fixed the issue.
Click to expand...
Click to collapse
Quarx Cm10 has a baseband switcher in Defy parts. Wont it work??

Delete the extra APNs in mobile networks. Seems to be working for me.
Sent from my MB526 using xda app-developers app

adix149 said:
hi,
I am having data connectivity problems with my defy. It periodically loses data connectivity and even switching off and switching on of the data toggle isnt helping. I have to restart every time i have to connect to net and then eventually it again looses the connection after sometime. So i am wondering it might be some problem with my settings in base band switcher.Quarx Cm10 dont have india in the South east asia region. So can any one suggest the settings for india? Also if some one else also faced the same problem kindly suggest how you overcome it.
Thanx in advance.
My Defy is Red lens running 28 th Aug Quarx build of Defy+
Click to expand...
Click to collapse
Use Manual APN you can easily create it.

base band settings ?
please suggest base band settings for my mb526 in india

gajularaju1988 said:
please suggest base band settings for my mb526 in india
Click to expand...
Click to collapse
I use the default Central Europe 3.4.x.. It's working for me..

chandujram said:
I use the default Central Europe 3.4.x.. It's working for me..
Click to expand...
Click to collapse
Works for me too.
Sent from my MB526 using xda app-developers app

Try the south east Asia 3.4.3-331. Should work fine.
Sent from my MB526 using xda premium

How to select proper settings
Hello. After testing of this program I (and some of my acquaintances) have not doubt that basebandswitcher really changes frequencies. But I feel that this program is just additional unlocker of operator (or locations) at operating system level.
For example:
I and two my acquaintances live in Ukraine. Frequencies:
2G 900/1800
3G 2100
All devices has been flashed equally:
At first flashed sbf 4.5.1-134_DFP-10;
then flashed radio EPU93_U_00.61.00;
after getting root and installing last version official CM7.2, which used by default this baseband settings: central_europe_34x (it is equivalent Central Europe Hong Kong, Taiwan, Arabia, France, Nordic 3.4.x United Kingdom 4.5.1-85 900/2100MHz)
The first device (from central Europe) start to work correctly after choice Europe RT 3.4.2-145;
The second (from Poland, was locked under orange) began to work correctly after choice Poland Orange 3.4.2-131z
My device from the USA (was locked under t-mobile). It works only with US T-Mobile 3.4.2-107-4 or US T-Mobile 3.4.2-107-9.
So, 3 devices equally flashed and used at one country, but worked on a miscellaneous (depending on from where has been brought). After a choice of settings for the INITIAL OPERATOR OR LOCATION (instead of current basebands values of current region) devices began to behave equally.
Sorry for bad English

Defy+ plus no network - change baseband doesn't fix

so.. I have this phone parked in my drawer for almost a month and finally decided to seek for online help.
Last rom installed is cm7 (but i've tryed several others cm7.2 cm9 cm10 cm10.1). I've tryed using both the baseband switcher included in the rom settings (where avaiable) and the standalone apk. I live in Italy so I chose Italy in the baseband selection (again.. I've tryed several others basebands just in case...). The sim card is a working VodafoneIT sim card and it is recognized by the phone.
the problem is that my phone does not lock to any network and I see the message "emergency calls only".
I also tryed to flash original sbf from here.
I don't know if it matters but logcat reports these errors:
Code:
E/GSM ( 6427): RIL implementation has returned an error where it must succeedcom.android.internal.telephony.CommandExcep tion: GENERIC_FAILURE
D/RILSWITCH( 2018): RILD unknown at cell -1
E/GSM ( 6427): Wrong network type: 0
I remember that at the time of when the problem showed up the first time, looking on the internet, in addition to the advice of changing the baseband, I found a thread where someone was talking about a possible hardware fail.. but I can't find it anymore.
any suggestion?
thanks

up????

i'm also having this problem
anyone found the fix?

Does the same error occur in stock? If so then I think it's a hardware issue. You could try a different sbf of your carrier and region(a newer one), but I do not think it would help much.
Sent from my MB526 using Tapatalk 2

I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work

romanoqz said:
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
Click to expand...
Click to collapse
Try with different bands from your country or another country with the same frequencies.
Pull the batery out for a few seconds.
Use the latest version of the standard app (not defy parts).
Regards,

It works for me with a different company of my country
My chip is Personal_AR and with this don't work, but with Claro_Ar works fine...
THX it's make me crazy

{Help} G4 plus Xt1643 Network Issue

G4 plus xt1643 bought via amazon indian varient
i had lost network after i flashed to stock rom from a custom rom.i have tried blank flash also and currently running nougat on it.the sim is detected and showing imei no of both sim slots but not getting signal.am able to manually search for my network and the network operator is shown on the list but wont let me register to the network,when i select my network from list it shows "selected network unavailable".rest of the phone worked perfect wifi bluetooth etc no issue.
phone details
Os-7.0 nougat
Baseband- M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST
Security Patch - December 1,2017
Build No-NPJS25.93-14-13
Kernal Version- [email protected]#1 Thu Nov 23 09:34:10 CST 2017

I believe it is an issue of the APN. All the custom roms i had tried had this issue. But it was only later (Like 5-6 different rom tryouts that i understood that changing the APN worked. For me it was set to "portalnmms" for my sim by default. Changed it to "www". You can try this method. Settings->more->mobile networks-> Access point names

Jibingeorge said:
I believe it is an issue of the APN. All the custom roms i had tried had this issue. But it was only later (Like 5-6 different rom tryouts that i understood that changing the APN worked. For me it was set to "portalnmms" for my sim by default. Changed it to "www". You can try this method. Settings->more->mobile networks-> Access point names
Click to expand...
Click to collapse
Nope that didnt resolve the issue.

I think you are having a baseband problem . Even if you flash it you will not be able to change the baseband version. I was having the same problem but if fixed it .

Fevex Yumnam said:
I think you are having a baseband problem . Even if you flash it you will not be able to change the baseband version. I was having the same problem but if fixed it .
Click to expand...
Click to collapse
How you fixed it?

joaopaulo_ said:
How you fixed it?
Click to expand...
Click to collapse
Bro I have same problem ,is it fixed ?

Issue continue...
Hi bro did u fixed this issue... Now am also facing same issue for Moto g4 plus XT1643. Everything is fine but network signal not coming. I flashed multiple times with stock rom. But failed to get Network signal. I flashed with fast boot options... Please help me....

hello...after the oreo ubdate of moto g4 plus...not getting netork in my sim it shows no service and when i call someone it shows turn pfff aeroplane mode...any idea plz help