Hi all, I'm new to this so go easy please!
I am travelling in India and cannot get a data signal, only normal calls/texts.
Can you tell me which baseband I should select from the baseband switcher in advanced settings (Defy Parts)? I don't see an option for India...
I am running Eppy's CM9 13-Jun-12 & CM7 Froyo Kernal.
Thanks in advance.
Select southeast Asia 3.4.3-331. If the settings doesn't persist, then install bbswitcher(you can find the thread in dev section) and use that baseband. Enjoy.
Sent from my MB526 using XDA App
Thanks, tried both, but with no luck, also tried other southeast Asia baseband's and China baseband's without success...
Any other ideas?
Sent from my MB525 using XDA
Default cee-europe also works actually. Are the settings persistent, did you try installing baseband switcher?
Sent from my MB526 using XDA App
Yes tried the baseband switcher app also. What do you mean by are the settings persistent?
I also tried a full wipe, flash sbf & reinstall CM9 with latest 13-Jun kernel, still same problem...
Sent from my MB525 using XDA
Baseband Switcher V 4.1 | Signal intelligent monitoring
This version support show the dBm asu to you.
THIS Baseband solve u r problem
1. Support English well.
2. Adjust the layout file
3. Add Tab icon and un-selected effect of selected effect
4. Add some new baseband config
5. Optimized code for each module
6. Modified the execution order and the interface
7. Adjust the configuration of the prompt box displays, more intuitive
8. Add Confirm boxes to prevent misuse verification.
9. Adding real-time display the current signal strength to facilitate the players view
10. When the baseband is not displayed when the unknown is identified
11. When a user accidentally deleted the baseband configuration, the assistant can provide the baseband recovery.
http://forum.xda-developers.com/showthread.php?t=1203297
use china 850Mhz/2100Mhz baseband...it works
International 900/2100 works for me
in the list select " International" mode it works for me..
green.jersey said:
Hi all, I'm new to this so go easy please!
I am travelling in India and cannot get a data signal, only normal calls/texts.
Can you tell me which baseband I should select from the baseband switcher in advanced settings (Defy Parts)? I don't see an option for India...
I am running Eppy's CM9 13-Jun-12 & CM7 Froyo Kernal.
Thanks in advance.
Click to expand...
Click to collapse
It depends on your provider. what provider are you using?
Thank you for the replies everyone.
Unfortunately I have tried all of the suggestions and I still can't get the data connection to work.
My provider is T-Mobile UK. Perhaps they are blocking the data connection? I've never had a problem in other countries though...
Than its not your baseband. Contact your provider.
Defy baseband query
Hey folks,
I have changed the baseband selection option to South East Asia 3.4.3-331.
After this I am getting dedicated mobile network without any disruptions.
But unfortunately after this change when I accept any incoming call or make any call then I am not able to talk(The other person is not able to hear me and I am not able to hear another person voice).
Related
hi,
I am having data connectivity problems with my defy. It periodically loses data connectivity and even switching off and switching on of the data toggle isnt helping. I have to restart every time i have to connect to net and then eventually it again looses the connection after sometime. So i am wondering it might be some problem with my settings in base band switcher.Quarx Cm10 dont have india in the South east asia region. So can any one suggest the settings for india? Also if some one else also faced the same problem kindly suggest how you overcome it.
Thanx in advance.
My Defy is Red lens running 28 th Aug Quarx build of Defy+
adix149 said:
hi,
I am having data connectivity problems with my defy. It periodically loses data connectivity and even switching off and switching on of the data toggle isnt helping. I have to restart every time i have to connect to net and then eventually it again looses the connection after sometime. So i am wondering it might be some problem with my settings in base band switcher.Quarx Cm10 dont have india in the South east asia region. So can any one suggest the settings for india? Also if some one else also faced the same problem kindly suggest how you overcome it.
Thanx in advance.
My Defy is Red lens running 28 th Aug Quarx build of Defy+
Click to expand...
Click to collapse
Hey install baseband switcher.. i have defy and had same issue. flashing baseband switcher and restart the phone after selecting India fixed the issue.
Rodefy said:
Hey install baseband switcher.. i have defy and had same issue. flashing baseband switcher and restart the phone after selecting India fixed the issue.
Click to expand...
Click to collapse
Quarx Cm10 has a baseband switcher in Defy parts. Wont it work??
Delete the extra APNs in mobile networks. Seems to be working for me.
Sent from my MB526 using xda app-developers app
adix149 said:
hi,
I am having data connectivity problems with my defy. It periodically loses data connectivity and even switching off and switching on of the data toggle isnt helping. I have to restart every time i have to connect to net and then eventually it again looses the connection after sometime. So i am wondering it might be some problem with my settings in base band switcher.Quarx Cm10 dont have india in the South east asia region. So can any one suggest the settings for india? Also if some one else also faced the same problem kindly suggest how you overcome it.
Thanx in advance.
My Defy is Red lens running 28 th Aug Quarx build of Defy+
Click to expand...
Click to collapse
Use Manual APN you can easily create it.
base band settings ?
please suggest base band settings for my mb526 in india
gajularaju1988 said:
please suggest base band settings for my mb526 in india
Click to expand...
Click to collapse
I use the default Central Europe 3.4.x.. It's working for me..
chandujram said:
I use the default Central Europe 3.4.x.. It's working for me..
Click to expand...
Click to collapse
Works for me too.
Sent from my MB526 using xda app-developers app
Try the south east Asia 3.4.3-331. Should work fine.
Sent from my MB526 using xda premium
How to select proper settings
Hello. After testing of this program I (and some of my acquaintances) have not doubt that basebandswitcher really changes frequencies. But I feel that this program is just additional unlocker of operator (or locations) at operating system level.
For example:
I and two my acquaintances live in Ukraine. Frequencies:
2G 900/1800
3G 2100
All devices has been flashed equally:
At first flashed sbf 4.5.1-134_DFP-10;
then flashed radio EPU93_U_00.61.00;
after getting root and installing last version official CM7.2, which used by default this baseband settings: central_europe_34x (it is equivalent Central Europe Hong Kong, Taiwan, Arabia, France, Nordic 3.4.x United Kingdom 4.5.1-85 900/2100MHz)
The first device (from central Europe) start to work correctly after choice Europe RT 3.4.2-145;
The second (from Poland, was locked under orange) began to work correctly after choice Poland Orange 3.4.2-131z
My device from the USA (was locked under t-mobile). It works only with US T-Mobile 3.4.2-107-4 or US T-Mobile 3.4.2-107-9.
So, 3 devices equally flashed and used at one country, but worked on a miscellaneous (depending on from where has been brought). After a choice of settings for the INITIAL OPERATOR OR LOCATION (instead of current basebands values of current region) devices began to behave equally.
Sorry for bad English
Hi,
I couldn't find anything related to this on the forum so here it goes.
I know that google has disabled LTE support in latest baseband release. And one would be able to flash the old baseband to regain LTE support. However there's many steps that one need to do to get it enabled (type in service code, change LTE setting, enter APN etc.), not to mention you also loose some enhancements/bugfixes.
So my question is that, is there any way one can build a custom ROM + modified latest baseband (4.2.2) to have default enabled LTE support directly? (means no service code change, APN change etc. and with all the possible enhancement from the baseband build)
If yes, please direct me to the post or instruction, if not, why not?
Thanks for answering!
bluefoxreg said:
Hi,
I couldn't find anything related to this on the forum so here it goes.
I know that google has disabled LTE support in latest baseband release. And one would be able to flash the old baseband to regain LTE support. However there's many steps that one need to do to get it enabled (type in service code, change LTE setting, enter APN etc.), not to mention you also loose some enhancements/bugfixes.
So my question is that, is there any way one can build a custom ROM + modified latest baseband (4.2.2) to have default enabled LTE support directly? (means no service code change, APN change etc. and with all the possible enhancement from the baseband build)
If yes, please direct me to the post or instruction, if not, why not?
Thanks for answering!
Click to expand...
Click to collapse
You can just use the old baseband and have LTE on any ROM.
Sent from my Nexus 4 using Tapatalk 2
Thanks for your reply. Yes, as I stated in my OP, I'm well aware of the ability to use old baseband on the other ROMs to have LTE. However, I'd like to have LTE on latest baseband, and also native LTE support without fiddling with the settings.
I would like to learn how to do it if there's no one already doing it, just need some direction to the right documentation/guides or explain why its not feasible.
bluefoxreg said:
Thanks for your reply. Yes, as I stated in my OP, I'm well aware of the ability to use old baseband on the other ROMs to have LTE. However, I'd like to have LTE on latest baseband, and also native LTE support without fiddling with the settings.
I would like to learn how to do it if there's no one already doing it, just need some direction to the right documentation/guides or explain why its not feasible.
Click to expand...
Click to collapse
I don't believe the baseband software is open source. Since the LTE functionality was removed from the baseband itself, flashing a ROM is not going to restore it to the .44 baseband.
JaiaV said:
I don't believe the baseband software is open source. Since the LTE functionality was removed from the baseband itself, flashing a ROM is not going to restore it to the .44 baseband.
Click to expand...
Click to collapse
I see, that's what I'm afraid of, so I guess the best one can do is pack a .39 baseband with custom 4.2.2 ROM with default LTE configuration then? So I guess my follow up questions is how much of the LTE operation is controlled by the basedband module?
Can a ROM have LTE as Preferred Network setting?
I think its possible to have default APN configured baked into the ROM?
Sorry for my english
I have a problem.
I was on this rom
http://forum.xda-developers.com/showthread.php?t=2044797
after all i flashed this one
http://forum.xda-developers.com/showthread.php?t=2192807
but i didnt like it and i came back to negan rom.
(Yes, I did full wipe)
Now i habe problem with 2g and 3G internet.
Google play and browser detect no internet, but i can log into my google account.
My chat (Gadu-Gadu) works fine...
I tryed to go back to stock rom, and root, instal 2ndboot, and flash one more time negan Rom.
Problem is still there.
what i can do?
Checked baseband to match your region already?
Was it working before? Doesn't seem like a baseband issue.
Sent from my MB526 using xda premium
3G do not work
i've a similar problem with the last nightly:
Every think working fine except the 3G reception only.
I've try to change the base hand configurations but the problem still there.
Wi-fi working fine
Sms OK
Gsm seems OK
Just the 3G
Any suggestion?
Tnks
(i have a Brazilian network "vivo")
base band selection
kindly suggest base band selection for mb 526 ....having network problem with my moto defy plus after installation of cm 10
so.. I have this phone parked in my drawer for almost a month and finally decided to seek for online help.
Last rom installed is cm7 (but i've tryed several others cm7.2 cm9 cm10 cm10.1). I've tryed using both the baseband switcher included in the rom settings (where avaiable) and the standalone apk. I live in Italy so I chose Italy in the baseband selection (again.. I've tryed several others basebands just in case...). The sim card is a working VodafoneIT sim card and it is recognized by the phone.
the problem is that my phone does not lock to any network and I see the message "emergency calls only".
I also tryed to flash original sbf from here.
I don't know if it matters but logcat reports these errors:
Code:
E/GSM ( 6427): RIL implementation has returned an error where it must succeedcom.android.internal.telephony.CommandExcep tion: GENERIC_FAILURE
D/RILSWITCH( 2018): RILD unknown at cell -1
E/GSM ( 6427): Wrong network type: 0
I remember that at the time of when the problem showed up the first time, looking on the internet, in addition to the advice of changing the baseband, I found a thread where someone was talking about a possible hardware fail.. but I can't find it anymore.
any suggestion?
thanks
up????
i'm also having this problem
anyone found the fix?
Does the same error occur in stock? If so then I think it's a hardware issue. You could try a different sbf of your carrier and region(a newer one), but I do not think it would help much.
Sent from my MB526 using Tapatalk 2
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
romanoqz said:
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
Click to expand...
Click to collapse
Try with different bands from your country or another country with the same frequencies.
Pull the batery out for a few seconds.
Use the latest version of the standard app (not defy parts).
Regards,
It works for me with a different company of my country
My chip is Personal_AR and with this don't work, but with Claro_Ar works fine...
THX it's make me crazy
Hi Guys,
I'm from Australia and recently bought an Optus Galaxy S4 4G. Strangely, the model number is i9507. I double-checked this online and usually weird model numbers are just carrier-spin-offs. So I went ahead to root and flash just like you would with an International i9505.
So far no problems - 4.3.x PA rom works absolutely fine.
BUT:
I've tried some Kit Kat roms recently and they all flash fine but give me 'mobile network not available'. Strangely though, I can receive calls/text and talk on the phone, but when I try to dial or send text messages, I can't do it. My reception bar is completely empty as well.
WiFi is totally fine, just no data and mobile network
I've tried messing with the 'network operators' setting and if i select my carrier (I have a Vodafone sim) I'll get network reception until I turn off the screen and then my mobile network becomes unavailable again
Not sure what the problem is; modem? APN? or roms not suitable for my phone?
Current info:
ROM - [ROM] KOT49H【4.4.2】 GOOGLE EDITION 4.4.2 by Danvdh, Kryten2k35 & Ktoonsez
Baseband - i9507XXUAMH2
Kernel - [email protected]oonsez-VirtualBox #1
I've been flashing for a while now but it's usually just basic stuff so you can probably tell I'm pretty amateur lol.
Any help is greatly appreciated!
Thanks =)
Richard
richard_huang70 said:
they all flash fine but give me 'mobile network not available'. Strangely though, I can receive calls/text and talk on the phone, but when I try to dial or send text messages, I can't do it. My reception bar is completely empty as well.
WiFi is totally fine, just no data and mobile network
...
Current info:
ROM - [ROM] KOT49H【4.4.2】 GOOGLE EDITION 4.4.2 by Danvdh, Kryten2k35 & Ktoonsez
Baseband - i9507XXUAMH2
Kernel - [email protected]oonsez-VirtualBox #1
Click to expand...
Click to collapse
Hi Rich
As your baseband is quite out of sync with the firmware you are trying to run (MH2 is from 4.2.2 ,,, right?) I would suggest you change your baseband (modem) flashing an equivalent to the ROM firmware from here.
I've got yesterday the exactly same behaviour when finally and reluctantly I've added a data plan. I was running a successful low-baseband + high-firmware because was setted to "GSM Only" (try it ... will work flawless). When I've switched to LTE got what you've described in the face too . I've promptly updated my baseband and now all is fine :angel:
EDIT: please do nothing of the above described BEFORE taking a EFS backup with every tool you can find and preserving them in several highly fortified locations and 2 or 3 K7 Tapes too . Have an ODIN flashable copy of your MH2 baseband is advisable too.
Hope I've helped and please share your experience.
Nice regards.
.
Hey thanks for the reply! Helps heaps =)
While I still had those roms installed I did try flash a few modems within Odin, all failed though =S
Which one should I be flashing?
I believe I tried XXUFNA1 but the flash just doesn't go through
Does it make a difference which rom I flash the new modem from? I.e. flash when the new modem now or flash the new modem on the kitkat rom?
I'm currently using Pacman 4.3.1 since it's perfectly fine. Just can't wait to get on a KitKat rom though! haha
richard_huang70 said:
Hey thanks for the reply! Helps heaps =)
While I still had those roms installed I did try flash a few modems within Odin, all failed though =S
Which one should I be flashing?
I believe I tried XXUFNA1 but the flash just doesn't go through
Does it make a difference which rom I flash the new modem from? I.e. flash when the new modem now or flash the new modem on the kitkat rom?
I'm currently using Pacman 4.3.1 since it's perfectly fine. Just can't wait to get on a KitKat rom though! haha
Click to expand...
Click to collapse
Hi Rich
Sorry, may be my fault, but quite didn't got your
You may proceed having the below as a rule of thumb:
Your baseband (modem) version should always match your ROM (firmware) version.
Failure to flash something is never good signal. As you have an i9507 (I own the 5) is very advisable to flash a modem built for your S4 flavour.
The above rule should apply to it too so, if the only modem available for the i9507 is the MH2 your firmware have to match or these issues reported will return.
Did you tested the "GSM Only" option to corroborate (or not) my hyphothesis? With this config, you should perceive no signal drops when waked. I know it isn't a viable operational mode but ... just for fun
Nice regards and keep sharing :laugh:
.