Hi there,
i don´t know what to do. Since 3 days now i have only a bootlogo which disappears after 5 seconds and than my screen is just black. There is no chance to turn the device on again or to do anything with it.
Even connecting it to my pc isn´t working with a factory cable or a fastboot cable at all.
My device was rooted but i had not installed anything with my fastboot cable because i just received it 2 days ago.
What can i do now to reinstall a clean rom? Is there any idea?
m4soN said:
Hi there,
i don´t know what to do. Since 3 days now i have only a bootlogo which disappears after 5 seconds and than my screen is just black. There is no chance to turn the device on again or to do anything with it.
Even connecting it to my pc isn´t working with a factory cable or a fastboot cable at all.
My device was rooted but i had not installed anything with my fastboot cable because i just received it 2 days ago.
What can i do now to reinstall a clean rom? Is there any idea?
Click to expand...
Click to collapse
What did you do to get your device in a bootloop? Also, Are you sure your fastboot cable isn't faulty, Have you tried it before?
To be honest, i don´t know?! My girlfriend just told me that the device is offline and i tried to switch it on again, but i failed every time i tried.
I assume that the cable is working, because when i plug it into the device, for a short second the fastboot logo is coming up, but then i have the black screen again.
My problem is, that i dont know what to do now at all. Can you give me any proposal?
m4soN said:
To be honest, i don´t know?! My girlfriend just told me that the device is offline and i tried to switch it on again, but i failed every time i tried.
I assume that the cable is working, because when i plug it into the device, for a short second the fastboot logo is coming up, but then i have the black screen again.
My problem is, that i dont know what to do now at all. Can you give me any proposal?
Click to expand...
Click to collapse
Press lightly up or down on the micro USB connection,sometimes it is not good connection,
AW: Stuck in Bootloop without USB connection!
Try to hold on/off button for more than 30secs and look if it resets
m4soN said:
Hi there,
i don´t know what to do. Since 3 days now i have only a bootlogo which disappears after 5 seconds and than my screen is just black. There is no chance to turn the device on again or to do anything with it.
Even connecting it to my pc isn´t working with a factory cable or a fastboot cable at all.
My device was rooted but i had not installed anything with my fastboot cable because i just received it 2 days ago.
What can i do now to reinstall a clean rom? Is there any idea?
Click to expand...
Click to collapse
I have this problem too. It doesn't connect to adb or load into recovery mode.
Was there any changes in the last 3 days?
Related
Dear Bros,
I have a very serious problem here with my 818pro, which noone may have encounter in this forum, let me tell you in sequence:
1)First, after I downgrade my rom with this file Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar, I was unable to power up from USB. I can only power up using the wall mains.
2)After powering up from my wall mains, I upgrade my OS using this file
AKU3.3.07.ASERG .
3)After upgrade and hard reset, I am unable to boot up using both the wall mains and even the USB! My display just went blank, and my two leds (orange and blue) keep blinking on and off.
4)I connect my 818pro using USB to PC but cannot go into the bootloader mode nor boot up into the OS.
5)I connect using my wall mains (but not link to PC) and is able to go into bootloader screen, but still unable to boot up into the OS.
Here, I am unable to perform any upgrade/downgrade of ROM using the mains power as I cannot connect to my PC at all!
6)Worst case, I do not have any ROM backup file on my SDcard, therefore am unable to do anything at all!
7)Lastly, can any of you expert brothers here able to advise me wat to do now, or able to provide me with any SDcard rom backup for the 818pro, as I guess that is the only option out for me now???
Would be deeply grateful to the kind brothers here for helping me out! Sorry for the long story which may be confusing.
Best Regards
valiance said:
Dear Bros,
I have a very serious problem here with my 818pro, which noone may have encounter in this forum, let me tell you in sequence:
1)First, after I downgrade my rom with this file Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar, I was unable to power up from USB. I can only power up using the wall mains.
2)After powering up from my wall mains, I upgrade my OS using this file
AKU3.3.07.ASERG .
3)After upgrade and hard reset, I am unable to boot up using both the wall mains and even the USB! My display just went blank, and my two leds (orange and blue) keep blinking on and off.
4)I connect my 818pro using USB to PC but cannot go into the bootloader mode nor boot up into the OS.
5)I connect using my wall mains (but not link to PC) and is able to go into bootloader screen, but still unable to boot up into the OS.
Here, I am unable to perform any upgrade/downgrade of ROM using the mains power as I cannot connect to my PC at all!
6)Worst case, I do not have any ROM backup file on my SDcard, therefore am unable to do anything at all!
7)Lastly, can any of you expert brothers here able to advise me wat to do now, or able to provide me with any SDcard rom backup for the 818pro, as I guess that is the only option out for me now???
Would be deeply grateful to the kind brothers here for helping me out! Sorry for the long story which may be confusing.
Best Regards
Click to expand...
Click to collapse
Hey man,you're not alone.. my 818pro do act like that sucks things as yours...
hoping expert's help ,too.....
solved...just replace a new battery...haha..
really? replace a new battery will help? why is that so??? my battery is still good , and the only thing i did to **** up the pda is just reflashing the rom to a wrong one.
what happen when u replace a new battery? can share?
get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that
hey thanks! i've successfully unbricked my 818pro and flashed it with os 1.013, a very early version, and only that seems to work! I had tried flashing to aku3.3 clean rom from pdamoviz but it stuck at the splash screen after successful flashing.
another funny thing, although i unbricked my 818pro, i can still only soft reset it thru my charger instead of usb. If i soft reset while on usb power, the device will just shut off and show blue and orange flashing leds. Do u have a workaround for this problem?
valiance said:
hey thanks! i've successfully unbricked my 818pro and flashed it with os 1.013, a very early version, and only that seems to work! I had tried flashing to aku3.3 clean rom from pdamoviz but it stuck at the splash screen after successful flashing.
Click to expand...
Click to collapse
hI,How did you flash the rom? You could not go into bootloader mode, nor connect through usb. Please give the procedure used, because I have the same problem. Thanks.
no and there are still a lot of problems for me... I bricked 2 batterys already for example but I'm working on it ... but its a little bit different as I flashed a Wizard bootloader and I have no idea what happened with your phone^^ but something else... I know the problem though, often my phone doesn't even bootup after soft reset if its connected to the charger...
cr0ssy said:
get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that
Click to expand...
Click to collapse
|I tried the same with my G3 JAMin and it worked. I have a G4 JAMi wth the same problem. I tried the above solution but di'd not succeed. Any ideas?
please need help!
i try to downgrad my "prophet" and now i have (boot loader mode) only with AC adaptator and i see this: "
"get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that"
but my english is not well, can you try to explend me in french or by a graphic please?
I have a PPC6800 with US CELLULAR. I have never done any rom updates whatsoever. Earlier today my sound was acting funny as it does sometimes so I did a soft reset of my phone. It brought me into the bootloader screen where it says:
TITA100
SPL-1.07.0000
CPLD-9
and Serial at the bottom or USB if I plug in the USB cord.
If I plug in the USB and reboot my phone works as normal but if i disconnect it and reboot its back to the bootloader. I have used titan_exitbl.exe and it works of course until I reboot without the USB plugged in. Why would this be happening and how could I remedy the situation. Seems simple as everything works fine when I boot up with the USB plugged in.
Thanks for any replies.
Brandon
You are having a hardware failure. Time to get it replaced.
I had that same issue, eventually after upgrading it stopped. Hasn't done it in over 8 months now.
rcaryl said:
I had that same issue, eventually after upgrading it stopped. Hasn't done it in over 8 months now.
Click to expand...
Click to collapse
How did you upgrade it?
I have mine stuck in the bootloader. But it has SPL-2.06.0000 CPLD-9 . My phone locked up while I was trying to use it as a modem and reset it with the usb cable still pluged in and got the rainbow screen. Whenever I tried to reset it or hard reset, it would show a screen for a split second that said No image found. I have since then flashed it via the SD method and the USB method with two different sprint roms. The newest one on the HTC site and the last one. I also used the boot exit program and that doesn't work.
Hey guys I tried to connect my nexus 7 to my Windows 7 laptop but nothing popped up it just showed as charging on my n7 I've tried update the drivers and different cables and different laptops too but it's all the same, even fastboot doesn't show up or mtp in twrp, any ideas how to fix this guys?
Anyone got any idea how to fix this problem?
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Fobos531 said:
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Click to expand...
Click to collapse
Cheers mate but yep I tried that and nothing changed
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Armeddy said:
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Click to expand...
Click to collapse
Do you twrp installed mate?
No, I do not.
Hello everyone,
I think I've completely bricked my phone. I had a problem with security boot and after patching wrong "aboot.bin" it doesn't work Currently when i'm trying to turn it on, it only vibrates and nothing else happen. When I plug in the USB and connect it to the PC, phone also vibrates but isn't detected. When i put the battery off and connect the charger or usb it shows screen about not battery plugged.
Please help me and explain how to make it detected again.
nalif20 said:
Hello everyone,
I think I've completely bricked my phone. I had a problem with security boot and after patching wrong "aboot.bin" it doesn't work Currently when i'm trying to turn it on, it only vibrates and nothing else happen. When I plug in the USB and connect it to the PC, phone also vibrates but isn't detected. When i put the battery off and connect the charger or usb it shows screen about not battery plugged.
Please help me and explain how to make it detected again.
Click to expand...
Click to collapse
Unfortunately, there's nothing you can do at this point.. If you are still under warranty, just return the phone, they will probably change its motherboard or just change the phone itself. I have also been in the same situation as you, I tried everything, but nothing worked..
nalif20 said:
Hello everyone,
I think I've completely bricked my phone. I had a problem with security boot and after patching wrong "aboot.bin" it doesn't work Currently when i'm trying to turn it on, it only vibrates and nothing else happen. When I plug in the USB and connect it to the PC, phone also vibrates but isn't detected. When i put the battery off and connect the charger or usb it shows screen about not battery plugged.
Please help me and explain how to make it detected again.
Click to expand...
Click to collapse
Can you get into the download mode? Vol + and then plug a cable into your phone
And i have same problem,but no one dont know how to resolve this...
Are you install corect LG USB drivers ?
Hello everybody, I own an Xperia XC and a couple of months ago I’ve rooted it and I flashed 34.1.A.1.198 firmware, Advanced Stock Kernel and TWRP-recovery. All worked fine, until two weeks ago it lost suddenly the USB connectivity. I tried different USB-cables on different PC’s but neither the phone, nor the PC’s act in any way. Even in fastboot- or flashmode it doesn’t appear in the device manager of the PC’s. I made for a couple of times factory reset, I even changed the phone’s USB charging port with a new one, but nothing changed. I could load the phone only over a power strip with USB-power-supply. I tried to flash the firmware 34.1.A.1.198 again using flashfire (I made a pre-rooted .zip-file with PRFCreator) but now I get a boot-loop. The phone starts till Sony-Logo and after a few seconds it turns off and boots again. Trying to get in recovery mode has no effect (pressing volume up or down and Power-button).
Has anyone any idea, how can I solve this problem? Is there any possibility to make a hard reset without USB-connection?
man why did mess with your phone when you knew you cant use usb connection???
try this: press all buttons and hold them to turn the phone off then try to get access to twrp(or any recovery on your phone) then use a usb type-c flash memory with your phone to flash another zip and hopefully just bring the phone back to life
Kianush said:
man why did mess with your phone when you knew you cant use usb connection???
try this: press all buttons and hold them to turn the phone off then try to get access to twrp(or any recovery on your phone) then use a usb type-c flash memory with your phone to flash another zip and hopefully just bring the phone back to life
Click to expand...
Click to collapse
Thanks for your ansver Kianush, but it seems the phone can't handle any connected devices at the USB-port. Besides of that, when I try to connect it in flash- or fastboot mode, the LED goes green or respectively blue, but none of my PC's doesen't recognize it as a connected device in any way.
I tested the PC connection with an other Xperia XC (my daughter's), it worked without any problems. It was shown in the dewice manager as an "SOMC Flash Device".
It seems like some USB-kernel drivers are lost (?)
I think an option could be using s1tool, but I don't find something for Xperia XC and I don't know yet where the testpoint is for this phone.