Is it just me or are WiFi speeds on these tablets very slow? If anyone know Of a fix it would be appreciated.
Sent from my Nexus 7 using xda premium
I've seen other posts where people have found a small gap in the shell resulting in poor contact inside for the wifi leads. Some were able to squeeze the shell tighter to help and some opened the back and tried to carefully adjust the pins to make better contact. At least one person broke a contact pin, so be careful if you try that. My wi-fi connection and speeds are very good.
I can download a 100 Mb file in less than a minute, and web pages take less that 3 second to load.
Though, I have a 30 Mb/s connection from Charter that I can constantly get up to 45 for some reason.
Last night I transferred GBytes of data via ADB (i did a full tablet wipe and a bunch of restores) and couldn't help but notice that sustained data transfer via (wired) ADB is only about 1.4 Mbytes/sec. Sort of pathetic waiting around for a half-hour to transfer a 2.5 GB file.
Anyway, not to jack the OP (which is about WiFi), but I wanted to try and figure out what my best options are for high-speed backup (I have a 32 GB N7!) - including WiFi as an option.
Ran a couple of file transfer trials this morning using a ROM file that was 150,137,068 bytes.
Results first, more detail on each setup follows. (The results are compared in terms of data payload per second; in the cases where protocol overhead is high, the wire-speeds would be higher than calculated)
[1] SMB/CIFS write via WiFi : 518sec => 2.32 Mbits/sec. UGH (best of three trials)
[2] FTP put via WiFi : 109sec => 11.06 Mbits/sec
[3] FTP get via WiFi : 121sec => 9.9 Mbits/sec
[4] adb pull via USB : 78sec => 15.4 Mbits/sec
[5] adb push via USB : 117sec => 10.3 Mbits/sec
[6]* OTG VFAT write via USB: 33sec => 36.4 Mbits/sec
[7]* MTP copy via USB 13sec => 92.4 Mbits/sec
In the WiFi cases:
- Linksys WRT54G (802.11g) router circa 2006 [ 802.11g theoretical bw 54 Mbps ] 6' away -35 dBm signal
- SMB/CIFS "server" Windows Xp SP3 laptop on 100 Mbps Ethernet segment attached to router
- N7 SMB client app ES File Manager
- FTP Server app (Andreas Liebig) on N7
- FTP client app Windows Xp default ftp app for both push and pull
- Windows box on Ethernet, N7 only on WiFi.
In the OTG case:
- 8 GB Sandisk Class 2 microSD card on a card reader attached to OTG cable; single partition, empty card, VFAT formatting.
In the ADB case:
- adb v 1.0.31, Win 7 Pro x64, Quad-Core i5, USB 2.0
Observing the WinXp task manager performance tab during CIFS or FTP transfers, the wired (Ethernet) link would show a high degree of variability, oscillating between 5 Mbps to 15 Mbps instantaneous rates. Hard to say whether this is a router performance issue or something else (11 Mbits/sec approaches 1000 pkts/sec at a MTU of 1500 bytes).
* The numbers for the OTG and MTP transfer tests are possibly questionable as the role of file caching is unknown - the times given here are only the times that the file transfer dialog(s) remain on-screen. (The writes could be completing in the background out of cache with nothing showing on the screen) In particular, note that the OTG copy involved a "Class 2" microSD card - and yet the write speed seemed closer to 4.5 Mbytes/sec, rather than 2 Mbytes/sec
The SMB/CIFS transfer times are quite pathetic; but as with all performance measurements, any participant in the test could be the long pole in the tent. For instance, the issue might be the ES File Manager app. I did not test with a N7 CIFS-capable kernel.
Also, it would also appear that performance of ADB for file transfers are quite poor - well, in comparison to MTP anyway. Too bad MTP doesn't preserve file timestamps (as well as all sorts of other oddities).
Apologies in advance for using file transfer as a network benchmarking method - my connection to the outside world (DSL) peaks at only 3.8 Mbits/second, so I would need to set up some kind of LAN server to benchmark network performance in absence of flash-memory or hard-drive writes.
Anybody have any performance numbers to share for:
- OTG mounts of hard drives or SSD devices with NTFS or ext4 file systems
- CIFS/SMB network mounts with CIFS-capable kernels
- WiFi speed tests when remote server is via FiOS or U-Verse fiber connection?
========================================================================
[Edit] -- Added some network-only test results.
FWIW, I ran a couple of tests using the "netcat" tool to evaluate the same setup without writing files to mass storage devices. It turned out that a terminal emulator app that I have has a busybox with netcat built in, so I booted the WinXp laptop into a Ubuntu Live CD (10.04LTS), and ran netcat TCP write tests in both directions. I also used "iptraf" to look at peak bit rates.
Result? Peak observed speeds were about 16.6 Mbits/second, and sustained-average results were in the 11-12 Mbit/second range. From that I conclude that that the FTP transfer tests were probably network-limited, as testing involving file writes were really no slower than this. Whether that means the "N7 is WiFi limited" or something else is not deducible from the data I collected. In this case, it takes three to tango (N7 - router - laptop).
I do note however that blahman179 said above "100 MB in less than a minute" - 100 MB in 60 seconds is about 14 Mbits/second. Only a little faster than what I observed - right in the same neighborhood.
Note that I had my WiFi router set to G-only. I suppose that the basic bit rate with huge signals in the -30 dBm range means that the radios are indeed transferring packets at a 54 Mbit/sec bit rate - but with a duty factor of less than 30%.
@OP:
fwiw, I did a little searching. Some XDA N7 users with high speed ISP connections report peak download rates of 20-30 Mbps when connected to networks that can do much better than this using PCs.
That "speedtest.net" app reports peak values recorded over short intervals - I suppose that sustained (average) transfer rates are somewhat worse than this.
bftb0 said:
@OP:
fwiw, I did a little searching. Some XDA N7 users with high speed ISP connections report peak download rates of 20-30 Mbps when connected to networks that can do much better than this using PCs.
That "speedtest.net" app reports peak values recorded over short intervals - I suppose that sustained (average) transfer rates are somewhat worse than this.
Click to expand...
Click to collapse
Also Comcast and probably others boost your speed for the first part of your download making burst speeds optimistic.
Sent from my SCH-I605 using xda premium
I have 60 megabit, ive not sat and worked it out, but I often get speeds of 5500kb/s on torrents over wifi. Maybe not making use of all my bandwidth, but the downloads come in quick enough for me.
Sent from my Nexus 7 using Tapatalk HD
Having trouble with all wifi connections on my nexus 7... When i am on my home wifi I get 5mbps where all other g connected devices pull 25mbps. That's not so much of a problem. When I am tethered to my cellphone via wifi I get 600kbps with the nexus 7, but my cellphone tethered via wifi to my pc is 4mbps. I'm concluding something is wrong with the link speed on my nexus 7 but don't know what to do about it. Any help would be appreciated cause I really need more then 600kbps when not at home, especially when my phone regularly pulls 10mbps in my area.
I agree with the WiFi connection being slow with the n7.IMho I've seen better download speeds with my galaxy tab 2. I've also noticed with certain kernels the WiFi is faster.stock to me is the best and now I'm running the faux kernel and it ain't too bad.
I just tried the speedtest.net app and averaged about 9.4Mbs down and .68 up. Stock rom, rooted JB.
Related
I've noticed the following problem:
When trying to download (file copy/video play) from my LAN to the HD, download speeds maximum is about 340 kbps (LOL...that's like EDGE) . With the same setup (wireless "G" router) I can download on the HD from internet with speeds 2 000+ kbps. LAN operations between my PCs/laptops are @ 60 000 kbps wired and 20 000 kbps wireless (using the same setup). To access my LAN from the HD I'm using Resco Explorer....and at that 340 kbps speed it's not possible to watch movies from my LAN. No such problem with my other PDA (iPAQ HX4700) which is not even "G" but "B" device - speed is about 3 000 kbps. Can anyone confirm this and suggest a solution? Can anyone watch movies from LAN encoded with more than 400 kbps?
p.s.: Speeds are measured using DU Meter (for PC)
p.s. 2: Same low (340 kbps) speed with another wireless router
kokopipi said:
I've noticed the following problem:
When trying to download (file copy/video play) from my LAN to the HD, download speeds maximum is about 340 kbps (LOL...that's like EDGE) . With the same setup (wireless "G" router) I can download on the HD from internet with speeds 2 000+ kbps. LAN operations between my PCs/laptops are @ 60 000 kbps wired and 20 000 kbps wireless (using the same setup). To access my LAN from the HD I'm using Resco Explorer....and at that 340 kbps speed it's not possible to watch movies from my LAN. No such problem with my other PDA (iPAQ HX4700) which is not even "G" but "B" device - speed is about 3 000 kbps. Can anyone confirm this and suggest a solution? Can anyone watch movies from LAN encoded with more than 400 kbps?
p.s.: Speeds are measured using DU Meter (for PC)
p.s. 2: Same low (340 kbps) speed with another wireless router
Click to expand...
Click to collapse
if you are using the default memory card that came with the phone, it is only a class 2. the write speed isn't spectacular, this may not be the reason. but it's the only variable i see right now. since your can download stuff to your phone from web at good speeds. i think it's more of a problem with the machine that is "uploading" or hosting the video. check the upload speed of that machine.
I think the memory has nothing to do with the problem. And I've tried with different host machines - the same result.
Slow network speed through WIFI
I have to same problems on my HD. I am using a home server at home which holds all of my videos. When connecting to it and watching a video with my old Eten X800 everything works fine and runs smoothly. But doing the same on my HD results in an unwatchable video. If I copy and paste this video on my mem card on the HD the video runs smoothly. There are some strange things going on with the WIFI speeds on the HD
Anyone worth investigating this issue?
Yeah... the strange thing is LAN speed is much lower than Internet speed using same network equipment
do better help me to help you, can you give me the numbers again in the follow format (some of them were missing from your original post)
Internet->Host:
Host->Internet (may not be relevant, but give it anyway):
Internet->HD:
HD->Internet:
Host->HD:
HD->Host:
arrows indicating direction of the traffic (ie. downloading or upload).
buggybug0 said:
do better help me to help you, can you give me the numbers again in the follow format (some of them were missing from your original post)
Internet->Host:
Host->Internet (may not be relevant, but give it anyway):
Internet->HD:
HD->Internet:
Host->HD:
HD->Host:
arrows indicating direction of the traffic (ie. downloading or upload).
Click to expand...
Click to collapse
Internet->Host: 7825 kbps (currently)
Host->Internet (may not be relevant, but give it anyway): 506 kbps
Internet->HD: 1560 kbps (currently)
HD->Internet: can't measure
Host->HD: 340 kbps
HD->Host: 340kbps
Also
Host->another PC 60 000 kbps (wired)
another PC->Host 60 000 kbps (wired)
Host->Laptop 20 000 kbps (wireless)
Laptop->Host 20 000 kbps (wireless)
The Host could be PC/another PC/Laptop - the results concerning the HD are identical, which means the problem is not from the Host nor the network setup.
Did you check the power saving settings in the WiFi parameters ?
Coude said:
Did you check the power saving settings in the WiFi parameters ?
Click to expand...
Click to collapse
YEAH!
it could be toggled/switched on "better performance" for better speed and "best performance" for g protocol. But the device will be hotter!
Coude said:
Did you check the power saving settings in the WiFi parameters ?
Click to expand...
Click to collapse
These settings affect both Internet and LAN performances but Internet speed is OK and LAN speed is slow. And yes, I did play with the settings - results are the same. (because I'm 2-3 meters away from the wireless router). I'll be glad if someone with HD, actually tests a connection between his HD and a PC in a LAN and not just giving "blind" suggestions. What I want to know is if it's a problem with all HDs or just my device is faulty.
kokopipi said:
Internet->Host: 7825 kbps (currently)
Host->Internet (may not be relevant, but give it anyway): 506 kbps
Internet->HD: 1560 kbps (currently)
HD->Internet: can't measure
Host->HD: 340 kbps
HD->Host: 340kbps
Click to expand...
Click to collapse
the nerd in me just want to go to your house and troubleshoot this for you in person. LOL... anyway...
what is the file you used to test in each case? the reason i'm asking is that some files are more compressed than others, and the speed we see is the NOT the raw speed -- the capability of the wifi card. but the combined speed of the CPU processing power and the network speed.
long story short, if you are downloading, the data is broken up and transfered piece by piece -- a movie is broken up and transfered bit by bit. depending on the file, the receiver side needs to process these bits and recombine them back together. it's much easyer to recombine a webpage, text file or equivalent. but mp3s, rar/zip or movies are already compressed/encoded with special algorithm, so the receiver processor needs to chew through these data to recombine them, so it won't accept faster than it can "chew".
of course this may not be the reason for your problem at all, but try transferring a large text file (copy and paste text from a website to notepad and c+p over and over, till you have a ~ 10MB txt file).
Even on copy files (not trying to play them, hence no decompression) just copy from PC to HD, no matter what the file type is, the speed is that - 340 kbps. Why don't you just try it yourself?
Take a look at his article: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6440
tnyynt said:
Take a look at his article: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6440
Click to expand...
Click to collapse
Does it really improve speed? I find WIFI a bit slower with the yweak installed.
kokopipi said:
Even on copy files (not trying to play them, hence no decompression) just copy from PC to HD, no matter what the file type is, the speed is that - 340 kbps. Why don't you just try it yourself?
Click to expand...
Click to collapse
With my HD the same slow speeds. Tried several different hardware. Only HD is slow as hell. WIFI speed tweak does'nt do much, btw.
Some speed results:
WIFI Setting Best Battery / Resco Explorer 7.05: 45 KB/s
WIFI Setting Best Performance / Resco Explorer 7.05: 300 KB/s
WIFI Setting Best Performance / Total Commander/CE v2.51: 600 KB/s
So Resco does not work well with local shares. won't be using that anymore when c/p'ing. Altough speeds are doubling with TC it still is'nt fast imho.
Noone else tried this and encountered the same problem?
Ever find a fix for this?
I noticed the exact same problem last night when trying to play some TV shows over Wi-Fi from my PC. The file played OK for a couple seconds, then stalled
Using "Network Plugin for File Explorer" from HTC, I get an ave. speed of ±340kbps. The speed is the same whether I save to memery MC or phone memory. So the write speed of the MC has no bearing on the problem.
PS. Just tried on my work network with the same results...
Lucky you guys... I at best performance get ~120kb transfer and at optimal I get ~80kb transfer (copy) with Resco on wrt54gl with ddwrt on it
I have a wireless router(Asus WL-600G) in my room that support:
802.11g:6,9,12,18,24,36,48,54 Mbps
802.11b:1,2,5.5,11 Mbps
My PC connected to this router with wired lan and ofcource my HTC-HD connected to this router with wireless connection.
But in my phone's wireless LAN setting, in the box of Tx-Rate shows 54Mbps and in the box of Rx-Rate shows 1 Mbps(usually)(some times shows 54Mbps and then change to 1Mbps)
ofcource, I set power save mode to Best Performance.
When I use Resco File Explorer to transfer my files like .avi files, from my pc to my phone, my speed is up to 300KByte/s and it taking too long time, transfering my files.
And I can't watch my movies directly from my local Lan and continiusly my movie player(Core Player) buffering when i want to watch my movie so i can't use it to watch my movies directly from my LAN.
My question is, why my phone's rx-rate is 1Mbps when I have a router that support up to 54Mbps and why my transfer speed is up to 300Kbyte/s
Note: my devices are not so far(1 meter), and my signal progress bar is about 80%, although my Laptop in the same distance has VERY GOOD signal.
Have you tried the following http://forum.xda-developers.com/showthread.php?t=471910
i checked it, don't have any effect on my device !!!
have you tried changing the power settings to better perfomance??
zuadao said:
have you tried changing the power settings to better perfomance??
Click to expand...
Click to collapse
As i wrote before, I set power save mode to Best Performance !!!
In the thread to "make the wifi faster", they got a "wonderfull" speed up to 1900kbps... kiloBITS per seconds ! As kiloBYTES (the only interesting measure) it's an incredible ~240kB/s. It's just BAD for this kind of connection...
The WiFi on HTC devices is just there to be on the description of the device, cause it's just slower than a good HSDPA (around 4Mb/s or 500kB/s).
I can confirm I only got around 300kB/s using my G router. It's just not useable (you can expect a minimum of 1MB/s for a WiFi G and a max of 700kB/s for a B).
lpaso said:
In the thread to "make the wifi faster", they got a "wonderfull" speed up to 1900kbps... kiloBITS per seconds ! As kiloBYTES (the only interesting measure) it's an incredible ~240kB/s. It's just BAD for this kind of connection...
The WiFi on HTC devices is just there to be on the description of the device, cause it's just slower than a good HSDPA (around 4Mb/s or 500kB/s).
I can confirm I only got around 300kB/s using my G router. It's just not useable (you can expect a minimum of 1MB/s for a WiFi G and a max of 700kB/s for a B).
Click to expand...
Click to collapse
Thx Ipaso
I want to know in this device we don't have a real speed wifi !!? or all other pda like omnio, Xpersia and iphone have same wifi speed
And with 200 kByte/s i can't see my movies from my LAN? because Core player continiusly buffering
It is important for me, I can watch my movies with my HTC-HD device
do u know any other solution to watch my movies directly from my LAN without pouse ?
dr1361teh said:
Thx Ipaso
I want to know in this device we don't have a real speed wifi !!? or all other pda like omnio, Xpersia and iphone have same wifi speed
And with 200 kByte/s i can't see my movies from my LAN? because Core player continiusly buffering
It is important for me, I can watch my movies with my HTC-HD device
do u know any other solution to watch my movies directly from my LAN without pouse ?
Click to expand...
Click to collapse
I totally understand your problem, cause I'm trying to do the exact same thing (transfert avi and watching vids on my phone from my server using WiFi).
Yes - have exactly the same problem!!!
Router G mode, wifi G patch on HD, and speed about 200-300kB
I have the same speed problem with my home router ASUS WL-500w + sometimes it keeps disconnecting and connecting every 2 seconds.
I tried different WIFI router (Huawei) and it seems to work fine.
Tx-Rate shows 54Mbps and Rx-Rate shows 54 Mbps too.
+ with this router it was working on really long distance.
So i think the problem is in my ASUS router.
Today I'll try to use alternative firmware in my ASUS router. Maybe it will help.
Tried with 3 different radio roms, and with each ones, never more than ~300kByte/s... We don't even need WiFi G for this speed !
I wonder... is it because the device is defaulting to 802.11b instead of 802.11g?
one test could be to set your router to ONLY 802.11g......
Hi,
I recently got myself a new Type N WiFi router. On my old B/G Wifi router my SGS connected with 54MBit/s as it is supposed to do.
I was expecting to see a connection speed of 300MBit/s now (I'm not talking about the effective transfer rate, just the connection speed) but instead my SGS connects with very variable speeds to the router but never exceeding 65MBit/s.
Is this normal or do I have to do some specific settings in the phone or in the router?
my notebook computer connected at 300Mb/s while my SGS is at 72Mbps. HD(720p) playback through network is smooth.
its normal, sgs has only one antenna, look it up, for 300 Mbit u need 3 antenna.
Sent from my GT-I9000 using XDA App
no matter what kernel or rom i have on my i9000 I am getting on my N router maximum of 6-7Mbits (using wifi file explorer)
s3icc0 said:
no matter what kernel or rom i have on my i9000 I am getting on my N router maximum of 6-7Mbits (using wifi file explorer)
Click to expand...
Click to collapse
You are talking about the transfer rate, I asked instead about the connection speed. You might be able to see this logging into your router. Your slow transfer speed probably depends of the fact that you are connected with your PC through Wi-Fi too. Connect the PC by cable and your transfer speed will at least double.
Sent from my GT-I9000 using XDA App
my all-time maximum is 72Mbps
and its not even effective
when transferring files it uses about half of that speed
720p is indeed smooth
I'd like to move video files from my Linux server to my Nexus 7. But I can't seem to get good transfer speeds. All transfers are over the LAN; no Internet hops involved.
Part 1:
I've tried using cafeFTP for SFTP and I consistently get speeds around 300 KB/s.
I've tried using AndSMB for Samba and I consistently get speeds around 400 KB/s (and Samba has file name issues).
I tried getting MTP to work, but it was really flaky; and I'd prefer a wireless solution.
My laptop (running Linux) transfers the same files via SFTP at up to 3 MB/s.
What kinds of speeds are people usually getting?
This is my first Android device so I have no other experience with Android transfer speeds.
Part 2
Best solution for transferring files from Linux to Nexus 7 without interacting with Linux machine (headless server)?
Also, does anyone have a solution that actually works to queue up a large transfer and keep trying until it's done? Both cafeFTP and AndSMB disconnect arbitrarily and then I have to reconnect and restart the transfers. This is incredibly inconvenient when trying to move a couple of movies overnight.
Misc. Info
My router is a WRT54GL running Tomato; I've been through its settings, but didn't find anything I thought would help.
I have done tons of searching about this; but there are so many garbage sites with no useful information covered in ads. I'm having a really hard time finding reputable information.
Thanks.
What sort of speeds do you get on a PC vs a PC?
EDIT: Blind.
What link speed are you getting in wireless info?
My speed with amdsmb copying from win 7 network drive to tablet
Mines fine. Using Linksys E-1500 2.4GHz 802.11n
Sent from my Nexus 7 using xda app-developers app
Mutilatory said:
What sort of speeds do you get on a PC vs a PC?
EDIT: Blind.
What link speed are you getting in wireless info?
Click to expand...
Click to collapse
Showing 54 MB/s for both the laptop and the Nexus 7: Full 802.11g connection. Server is 100 MB/s.
Edit: I'm going to check the information when I get home to make sure I'm not idiotically mixing up bits and bytes...
Edit2: Checked info (updated original post for clarity):
SFTP: Laptop 802.11g transferring at 1.9 MB/s. Nexus 7 802.11g transferring at ~300KB/s
tylerwatt12 said:
Mines fine. Using Linksys E-1500 2.4GHz 802.11n
--Can't quote the image location--
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Isn't 800 KB/s pretty slow for an 802.11n connection?
My laptop transfers the same files at up to 3 MB/s over 802.11g (shouldn't you be getting like 3x that on 802.11n?) . But I'm only getting around 1/10th that on my Nexus 7.
Using FTP I get ~2MB/s. Strange
Sent from my Nexus 7 using xda app-developers app
Amitola85 said:
Isn't 800 KB/s pretty slow for an 802.11n connection?
My laptop transfers the same files at up to 3 MB/s over 802.11g (shouldn't you be getting like 3x that on 802.11n?) . But I'm only getting around 1/10th that on my Nexus 7.
Click to expand...
Click to collapse
Well 800 kB/s is slow even for wireless G which should go 2.5-3 MB/s.
As for N these devices don't have 40 MHz channels so rather than 150 Mbps they are limited to 65 or 72 Mbps link rate, which should translate to about 3.5 MB/s
well i wonder what my problem is then. I have a netgear N300 and my win 7 drive is hardwired to it with ethernet.
I setup a plain FTP server which is getting transfer speeds of ~2100 KB/s. So that's MUCH better.
Perhaps the Nexus 7 just struggles with SFTP (encryption overhead makes this understandable) and Samba (not sure why it's so slow, just cause Samba is lame?).
Guess I'll be doing all my transfers over FTP. This makes me much less grumpy.
Just to recap, here are the transfer speeds I was seeing over 802.11g (54 Mbs connection) from a wired server running Linux:
SFTP: ~300 KB/s (cafeFTP)
Samba: ~400 KB/s (AndSMB)
FTP: ~2,100 KB/s (cafeFTP)
Edit: Current hypothesis is that SFTP and Samba were both maxing out the CPU. I haven't checked with a app to measure it, but the tablet did get hot during those transfers. If that's the case it may be implementation specific and other SFTP / Samba implementations may be more efficient and achieve higher speeds.
Using ES File Explorer and logging onto my windows share, I got file transfers of 700-900KB/sec, pretty poor.
So I set up an FTPServer on android and FileZilla on desktop and I get around 2.8MB/sec on transfers.
Salty Wagyu said:
Using ES File Explorer and logging onto my windows share, I got file transfers of 700-900KB/sec, pretty poor.
So I set up an FTPServer on android and FileZilla on desktop and I get around 2.8MB/sec on transfers.
Click to expand...
Click to collapse
Sorry for resurrecting a year-old thread but I just wanted to thank you for the suggestion of using FTP as the transfer mode as opposed to Samba. It's definitely a bit faster (~700-850KB/s vs 1.5-1.7MB/s). I don't know why you installed FTPServer on your Nexus 7 though, since ES File Manager is an FTP client as well.
I have the same issue:
During copy/move large file i.e. 2-3GB from Nexus 10 to Qnap NAS with ES file explorer I get max. 2.5Mb/s .
Is that normal or pretty slow?
My access point is this one: TP-link tl-wa901nd
karasuhebi said:
I don't know why you installed FTPServer on your Nexus 7 though, since ES File Manager is an FTP client as well.
Click to expand...
Click to collapse
There's a big difference between an FTP server and an FTP client. if you use a client on Android, you need a server on your PC.
Sent from my Nexus 7 using Tapatalk 4
garryknight said:
There's a big difference between an FTP server and an FTP client. if you use a client on Android, you need a server on your PC.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Right, thanks. Don't know what I was thinking lol.
---------- Post added at 11:06 AM ---------- Previous post was at 11:05 AM ----------
friend1 said:
I have the same issue:
During copy/move large file i.e. 2-3GB from Nexus 10 to Qnap NAS with ES file explorer I get max. 2.5Mb/s .
Is that normal or pretty slow?
My access point is this one: TP-link tl-wa901nd
Click to expand...
Click to collapse
What's normal on your network is whatever is normal for your network. We wouldn't be able to tell you since there's so many factors that could affect speed. There is something you could use as a sort of measure though: Try a PC-to-NAS file transfer and check what kind of speeds you get there. It's not a scientific way to do it by no means but it should give you a rough estimate of the speed you should expect on transfers to your N10.
I have a Galaxy S4 with the newest firmware from samsung I9505XXUGNF1 (Kitkat 4.4.2). My router is a Asus RT-AC66U to which My S4 connects to with max speed of 433 Mbps. My internet connection is 120 Mbps.
When I do a speedtest on the S4 I get results of over 110 Mbps, but when I'm downloading a file over LAN from the disk connected directly to the router I get download speed only of ~20Mbps (2.4 MB/s) which is very sucky!
My Laptop have only a N network card, and connects to the router with max 300 Mbps and when I download the same file I get over 7.5 MB/s!! (~65 Mbps).
Speedtest also shows results of over 110 Mbps...
I remember when the phone was new, and it had Android 4.3, I had LAN download speed of over 9-10 MB/s...
I tried with different file managers like X-Plore and others, but it looks like it is not the app problem.
Have you tried transferring a file over FTP?
Hi,
I would like to ask if it's normal to have <1MBps wifi transfer rate on my Galaxy S4. I'm trying to transfer a movie file from my phone to my PC (gigabit-lan) via my TP-LINK N750 router.
I checked my phone and it's currently connected using 2.4Ghz spec with 72Mbps linkspeed. Theoretically.. the wifi transfer speed should be around 8MBps not <1MBps.
Any clues why my transfer speed is slow? My forte is more on network stuffs so I'm not really sure if my phone is causing the bottleneck here or not. See attached for reference.
Thanks guys!
Sent from my GT-I9505 using XDA Premium 4 mobile app
I have the same issue across several different ROMs and modems. Laptop with external HD is connected to router with gigabit LAN, phone connected to router via wireless-N and I get roughly 1mbyte/s. However download speeds with my phone via WiFi is roughly 8 megabyte/s (fiber optic) so I know higher speeds are possible.
My other desktop PC achieves around 11-12megabytes through WiFi but my phone just gets nowhere near it.
Odd thing is when I stream videos to my phone though my WiFi from a hard drive the phone buffers at well over 5megabytes/s but file transfers are somehow limited... I could never figure this one out
Swizzy88 said:
I have the same issue across several different ROMs and modems. Laptop with external HD is connected to router with gigabit LAN, phone connected to router via wireless-N and I get roughly 1mbyte/s. However download speeds with my phone via WiFi is roughly 8 megabyte/s (fiber optic) so I know higher speeds are possible.
My other desktop PC achieves around 11-12megabytes through WiFi but my phone just gets nowhere near it.
Odd thing is when I stream videos to my phone though my WiFi from a hard drive the phone buffers at well over 5megabytes/s but file transfers are somehow limited... I could never figure this one out
Click to expand...
Click to collapse
Thanks Swizzy!
I also noticed this.. somehow I thought it was because of my router. So I decided to buy 450Mbps Dual Band router to test it. Unfortunately, it is still capped @ ~1MBps transfer rate even I used the 5Ghz spectrum
Complain to google
I have done some testing with a fast windows 7 system as the target and a Nexus 5 and an xperia neo v. I have also tested with XP and Linux smb clients. Basically the maximum I get get with stock 4.4.2 or 4.0.4 is about 4.5 Mbps (550KBps) pull down and 9Mbps push up. Wifi is 11g and XP gets 15 down and 19 up. openSUSE linux gets more or less the same as XP. The problem exists with ES Explorer and File Manager. I tried SFTP into linux with ES Explorer and that was a little slower. The standard USB transfer from windows explorer is really fast to the N5. This looks like a design or configuration problem in android 4. Complain to GOOGLE.
I am glad I found this just before I spent a lot of money on an ac router to speed up large wifi file transfers
So a device running pre version 4 should not have the limitation?
I have a Galaxy S4 with the newest firmware from samsung I9505XXUGNF1 (Kitkat 4.4.2). My router is a Asus RT-AC66U to which My S4 connects to with max speed of 433 Mbps. My internet connection is 120 Mbps.
When I do a speedtest on the S4 I get results of over 110 Mbps, but when I'm downloading a file over LAN from the disk connected directly to the router I get download speed only of ~20Mbps (2.4 MB/s) which is very sucky!
My Laptop have only a N network card, and connects to the router with max 300 Mbps and when I download the same file I get over 7.5 MB/s!! (~65 Mbps).
Speedtest also shows results of over 110 Mbps...
I remember when the phone was new, and it had Android 4.3, I had LAN download speed of over 9-10 MB/s...
I tried with different file managers like X-Plore and others, but it looks like it is not the app problem. Maby is a KitKat problem??
In short blame Broadcom or Samsung for using Broadcom BCM4335's BCM4335 wifi chipset. You need to understand how 802.11n works. To achieve 300mbps speed, you will need 2-3 spatial antennas which can be found on modern laptops with Intel Wifi chipset (such as 6300). Our galaxy note has only one antenna (should be 1 for each radio band (a/n, b/g/n), but it is "N" compatible. Unfortunately this is a case of the manufacturer misleading it's customers ( I would say out right lying to us). Its is compatible with N, however it can not support N speeds, as far as I have seen all phones that claim 802.11n are actually limited to 65mbps. So really are not 802.11n at all, rather just a little faster than 802.11g.
part of the problem is the maximum number of data spatial streams the radio can use. Also assuming equal operating parameters to an 802.11g network achieving 54 megabits per second (on a single 20 MHz channel with one antenna), an 802.11n network can achieve 72 megabits per second (on a single 20 MHz channel with one antenna and 400 ns guard interval); 802.11n's speed may go up to 150 megabits per second if there aren't other Bluetooth, microwave or WiFi emissions in the neighborhood by using two 20 MHz channels in 40 MHz mode. If more antennas are used, then 802.11n can go up to 288 megabits per second in 20 MHz mode with four antennas, or 600 megabits per second in 40 MHz mode with four antennas and 400 ns guard interval. Because the 2.4 GHz band is seriously congested in most urban areas, 802.11n networks usually have more success in increasing data rate by utilizing more antennas in 20 MHz mode rather than by operating in the 40 MHz mode, as the 40 MHz mode requires a relatively free radio spectrum which is only available in rural areas away from cities. Thus, network engineers installing an 802.11n network should strive to select routers and wireless clients with the most antennas possible (one, two, three or four as specified by the 802.11n standard) and try to make sure that the network's bandwidth will be satisfactory even on the 20 MHz mode.
Data rates up to 600 Mbit/s are achieved only with the maximum of four spatial streams using one 40 MHz-wide channel. Various modulation schemes and coding rates are defined by the standard and are represented by a Modulation and Coding Scheme (MCS) index value. The table below shows the relationships between the variables that allow for the maximum data rate. GI (Guard Interval) : Timing between symbols.[6]
Refrence: http://blogs.intel.com/technology/2010/02/the_black_and_white_worlds/
reference: http://en.wikipedia.org/wiki/IEEE_802.11n-2009#Data_rates
I see similar speeds on my S4 when doing wifi transwer. varies depending on which network i am on and what I am transferring to.
still faster than crappy USB connection..
@XeoNoX thank you for educational lesson.
WiFi Powersave mode
You may check if the WiFi power save mode is on. If it is on, you may turn it off and check if the speed improves.
To enter Service Menu, open dialer and press *#0011#
In the service menu, select menu > wifi
check if the WiFi power save mode is on or off. Turn it off.
If it was off, then you've wasted your time trying this