Yes, there's a similar thread, but i really wish somebody could help me with this, i have already flashed so many stock roms in order want to fix, but still doesnt help,
I was so regret that i pressed "NAND ERASE ALL", the other post said he fixed by flashing the new stock rom, but that's for N8010, while i am having N8000...
http://forum.xda-developers.com/showthread.php?t=2104538
and this is the same situation for me , video below
https://www.youtube.com/watch?v=-9gFJBz0THc
i am downloading some custom rom, if there's any know how to fix this problem...please help me...thank you sooooo much....
Related
Hi all,
I really need you guys help there..
I own a Asian version galaxy tab...
I first wanted to try out modaco r3 kernel so i flash the non-EXT4 version and it brings me to boot loop( doesn't get pass first samsung screen....)
then i had no clue about what to do and decided to flash back to HK rom with odin and when it is done it does get pass the first screen but it is now stuck and the samsung screen...where it occasionally vibrate and is stuck there
I really have no clue what's going on and it's the first time i encountered such problem since I've been a member in xda
I really hope if anyone can help out and lead me somewhere i can just turn my tab on and use it..
many thanks..
-Wilson
Also I've root my phone before and when i am done with the odin flash for the firmware...it actually gets me into recovery instead of to reboot directly
not sure what else is needed for you guys to help out...but if i can provide anything, please let me know
@season007
I encountered a similar problem just yesterday night while trying to flash to the New Modaco Kernel and Rom. While flashing the kernel, ext4 conversion took place and since then it just took me to a samsung boot window where a yellow window with half written text along with constant vibrations occurred.
I was able to get rid of it by installing Roto JMI v2 rom using Odin. ( Just put the "pit" file and the PDA rom and start. It takes about 5 minutes and my device is working again! P.S its a pretty good rom. Blazing fast!
You can get it here along with instructions : http://forum.xda-developers.com/showthread.php?t=939360
Cheers!
My original issue got resolved thanks to s15274n. This mans ROOT walkthrough is amazing!!!!!
NOW I have a problem getting my ROM to load.
Im trying to Install the Malice ROM. and nothing is going quite as smoothely as I think it should.
This is attempt 2, the first time I waited an hour to try and install this rom, straight from SD, and I think the furthest it got was "installing ROM"
nothing. pull the batery out (I assume thats a total noob move, and at beast ill-advisable.) rebooted, went about my day. well, im trying again, and now the furthest ive gotten is "Installing update" the status bar is never filling or scrolling though.
Whats the problem? (going on about 15 minutes with no change btw)
You must use Odin to either
-Flash back to stock so you can reinstall packages
or
-Flash a voodoo integrated kernel so you can flash roms w/ CWM/Voodoo Recovery
Download a voodoo kernel and flash it using odin.
ok, I have the kernal and I have ODIN. once again I have never used ODIN< I definately used a one click root.
does anybody have a link to a thread with *detailed*, hold my hand, walk me through it and pat me on the butt at the end Instructions on this? It's a learning process and damn if im not learning something by the time this is all said and done lol.
last time it sat still for me when it said installing update, it was a bad download. I redid my download of the rom and it went through fast and smoothly. Thats how i fixed my prob maybe it will fix it for u.
I really need some help i want to cry
I got the samsung galaxy s(vibrant) and it doesnt go pass the welcome screen im trying to install a rom but i dont know how have looked over thing i installed odin3 and everything else but when i plug it to the usb it doesnt show on my computer idk why and nothing shows on the id com for odin someone plz tell me this can be fixed please can someone plz plz help me i begg you from the bottom of my heart
i always odin to stock whenever i flashed a new rom, works like a champ all the time.
elmoslonely said:
I got the samsung galaxy s(vibrant) and it doesnt go pass the welcome screen im trying to install a rom but i dont know how have looked over thing i installed odin3 and everything else but when i plug it to the usb it doesnt show on my computer idk why and nothing shows on the id com for odin someone plz tell me this can be fixed please can someone plz plz help me i begg you from the bottom of my heart
Click to expand...
Click to collapse
do you have the .pit and .tar files? Also, are you turning your phone off? There is an awesome guide by s15274n called the noob guide. It goes over very specifically how to root, it also has a small tutorial on rooting using ODIN3. Search the q&a forum, i believe thats where the guide is.
Also just to clarify, im not saying ur a noob or inept, im just saying its a super awesome guide. My phones neen rooted for three days now, ive flashef a bunch of roms and i always flash nack to stock...REALLY helpful tutorial. Good Luck!
Hey guys,
I have a bad problem here and I can not find a solution for it...
here it is..
youtube.com/watch?v=rNY_HhYJQ9Y
can some one please help me?
I'm not professional or anything, but I think if you have boot loop problem like this, it's best to re-flash the ROM.
I've tried it but I always get an "170/171 Error" error. I cant solve it!
Does this thread help?
http://androidforums.com/incredible-tips-tricks/161463-ruu-error-170-171-solution-windows-7-a.html
What are you doing regarding reinstall of the ROM?
Wipe Cache? etc.
Dont work & I want to root it..
OK, what about this?
http://forum.xda-developers.com/showthread.php?t=646663
Sorry for my bad english!
I am form Austria and I need your help. Yesterday I flashed Omega Rom 13.2 and all worked fine (Flashed the Modem for the old Bootloader). After rebooting my phone I can not call anymore because the display turns black and the notification bar starts to blink ...
Also I can not play any music .
So i thought the Modem is wrong and flashed some for my country but that was useless.
Then I thought to go back to the BlackBox Rom (which has worked very well but after some time my display turns black and the led lights up but i cant use my phone and have to reboot it fter this all was fine) after flashing it worked but i also cant call or hear music.
I am not new at Flashing (Rooted and Flashed : Lg Optimus Speed/Galaxy S/Galaxy S2/Galaxy S3 and my new S4) but I do not know what to do.:crying:
Hope you can help my and I am also sorry that I have opened a new thread.
Greetings; Chris
ChrisK1996 said:
Sorry for my bad english!
I am form Austria and I need your help. Yesterday I flashed Omega Rom 13.2 and all worked fine (Flashed the Modem for the old Bootloader). After rebooting my phone I can not call anymore because the display turns black and the notification bar starts to blink ...
Also I can not play any music .
So i thought the Modem is wrong and flashed some for my country but that was useless.
Then I thought to go back to the BlackBox Rom (which has worked very well but after some time my display turns black and the led lights up but i cant use my phone and have to reboot it fter this all was fine) after flashing it worked but i also cant call or hear music.
I am not new at Flashing (Rooted and Flashed : Lg Optimus Speed/Galaxy S/Galaxy S2/Galaxy S3 and my new S4) but I do not know what to do.:crying:
Hope you can help my and I am also sorry that I have opened a new thread.
Greetings; Chris
Click to expand...
Click to collapse
Hi, I'm from Italy,
yesterday I had the same problem after installing the new Omega rom 13.2 and the XXUEMJ5 modem. After many different attempts (flashing stock roms, modems, etc.) finally I solved the problem with this method:
- I flashed the italian stock rom "I9505XXUAMDM_I9505ITVAMDB_ITV" (you can find it in the Samfirmware website) selecting the file with Odin "PDA" button , adding to the configuration of Odin (3.07) a pit repartition file named "CSB_signed_Fusion3_EUR_0325_V2.pit" (attached).
- After this action, you have a stock firmware installed with no custom recovery and obviously with no root.
- Then I start the phone into stock recovery (Volume Up+Home+Power) and I select to erase all user data.
The phone, at the end, boot up, ..... with sound, wifi, and ....... everything WORKING !!!.
Now you have to root again the phone, ....... but it works... !!!!
I hope that this can be a solution also for you.
Not fixed
caneegatto said:
Hi, I'm from Italy,
yesterday I had the same problem after installing the new Omega rom 13.2 and the XXUEMJ5 modem. After many different attempts (flashing stock roms, modems, etc.) finally I solved the problem with this method:
- I flashed the italian stock rom "I9505XXUAMDM_I9505ITVAMDB_ITV" (you can find it in the Samfirmware website) selecting the file with Odin "PDA" button , adding to the configuration of Odin (3.07) a pit repartition file named "CSB_signed_Fusion3_EUR_0325_V2.pit" (attached).
- After this action, you have a stock firmware installed with no custom recovery and obviously with no root.
- Then I start the phone into stock recovery (Volume Up+Home+Power) and I select to erase all user data.
The phone, at the end, boot up, ..... with sound, wifi, and ....... everything WORKING !!!.
Now you have to root again the phone, ....... but it works... !!!!
I hope that this can be a solution also for you.
Click to expand...
Click to collapse
Today I tried your solution 4 or 5 times but it does not fix my problem :/
Hope somebody could help me and thanks for your help !
Before I forget it, I am on the new Knox Bootloader and my knox warranty void is 0x1 ...
Greetings Chris
ChrisK1996 said:
Today I tried your solution 4 or 5 times but it does not fix my problem :/
Hope somebody could help me and thanks for your help !
Before I forget it, I am on the new Knox Bootloader and my knox warranty void is 0x1 ...
Greetings Chris
Click to expand...
Click to collapse
Hi Chris,
you wrote that you flash Omega Rom, so I supposed you are not on Knox.... like me.
This method was a solution for me but I had a free bootloader. I'm afraid .... Good luck !!!!
caneegatto said:
Hi Chris,
you wrote that you flash Omega Rom, so I supposed you are not on Knox.... like me.
This method was a solution for me but I had a free bootloader. I'm afraid .... Good luck !!!!
Click to expand...
Click to collapse
Yeah :/
I do not know why I got this new bootloader ... befor flashing Omega I had the BlackBox Rom which was very well.
O maaannn I want to use my S4 and not my S3 or LG ...
Does anybody know a solution ??
So you still have the old bootloader? And even with 4.2.2 custom roms your sound and wifi do not work?
If it were my device, I would pick a 4.2.2 stock Knox free rom. Put in the .pit file and set repartition to on. This way you will get a clean device again.
Only use that method is you are sure the flashing will succeed! If you fail, you're device is dead. So be carefull.
You first have to test if the flasing will succeed. You have to flash the stock rom first WITHOUT the .pit file and repartiton. If that goes well, then you can use the same stock rom and now with .pit an repartition.
So if you know what you are doing and you know that the Odin flash will succeed, then you could try it.
/edit, i see you have the knox bootloader. I think the same applies, only now with a 4.3 stock rom.
Solved it
:victory:
I solved my problem !!!
I am not at the old bootloader !!! I am on the new with a locked knox system ...
My Knox is flagged but my S4 works perfectly
The solution is that you have to flash a new rom !!! You can´t flash a Rom with the old opened bootloader
I ask myself why I do not thought about this ... Because the Lg has the same problem ^^
Hope everyone with the same problem can read this
Thank you for your help and if somebody needs help you can ask me
Greetings Chris:highfive:
No Sound Problem!!
ChrisK1996 said:
:victory:
I solved my problem !!!
I am not at the old bootloader !!! I am on the new with a locked knox system ...
My Knox is flagged but my S4 works perfectly
The solution is that you have to flash a new rom !!! You can´t flash a Rom with the old opened bootloader
I ask myself why I do not thought about this ... Because the Lg has the same problem ^^
Hope everyone with the same problem can read this
Thank you for your help and if somebody needs help you can ask me
Greetings Chris:highfive:
Click to expand...
Click to collapse
Hi, I'm having similar problems I have no sound at all coming from the device, I've read most threads that say no sound on the heading for I9505 and for many people flashing I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar resolved the problem but not in my case.
Last night I tried flashing I9505XXUEMI8_I9505OXAEMI8_I9505XXUEMI8 and after I changed the kernel I got some sound when turning the volume up and down but the phone was running very slow.
Today I tried flashing Omega rom v15 flashing the right modem for the new bootloader before flashing the zip and no sound, I tried changing the kernel, still nothing.
So now I'm in build number XXUEMJ9 and baseband MJ5.
I've also tried flashing stock with a pit file but didn't make a difference!
I don't really understand what you said about You can´t flash a Rom with the old opened bootloader!
I'm new to samsung, I've leaned to root and do all this with HTC and I do it with the cmd, now I'm using odin so need good explanations!
Hi, i have a sprint samsung galaxy s4. i rooted it and all was good, i tried to change boot image, and failed. then realized i needed to add a rom. i tried to add cyagenmod (sorry, i probably botched that spelling) and now the custom boot image works, but it wont load past that. what do i do. i can still get to recovery mode, but it all just confuses me. somebody, anybody, please help. my greatest thanks in advance.
esuser2442 said:
Hi, i have a sprint samsung galaxy s4. i rooted it and all was good, i tried to change boot image, and failed. then realized i needed to add a rom. i tried to add cyagenmod (sorry, i probably botched that spelling) and now the custom boot image works, but it wont load past that. what do i do. i can still get to recovery mode, but it all just confuses me. somebody, anybody, please help. my greatest thanks in advance.
Click to expand...
Click to collapse
First you need to be sure what version of galaxy s4you have, l720 or l720t. Then simply go to www.sammobile.com/firmwares/ and in the search box type your s4 model, download stock firmware and flash it trought odin. I will link a youtube link to be easier for you. Please search other forums posts to understand this process better. I am here to help you just pm me
https://www.youtube.com/watch?v=Q-UQVhuGO5Y
So which recovery did you install?
Also what do you mean it won't go past the recovery?
Do you mean it won't boot normally?
Have you installed a ROM (cm zip file for example) in the recovery and let it finish, then try booting?
Let me know how it goes