Hi all,
I really need you guys help there..
I own a Asian version galaxy tab...
I first wanted to try out modaco r3 kernel so i flash the non-EXT4 version and it brings me to boot loop( doesn't get pass first samsung screen....)
then i had no clue about what to do and decided to flash back to HK rom with odin and when it is done it does get pass the first screen but it is now stuck and the samsung screen...where it occasionally vibrate and is stuck there
I really have no clue what's going on and it's the first time i encountered such problem since I've been a member in xda
I really hope if anyone can help out and lead me somewhere i can just turn my tab on and use it..
many thanks..
-Wilson
Also I've root my phone before and when i am done with the odin flash for the firmware...it actually gets me into recovery instead of to reboot directly
not sure what else is needed for you guys to help out...but if i can provide anything, please let me know
@season007
I encountered a similar problem just yesterday night while trying to flash to the New Modaco Kernel and Rom. While flashing the kernel, ext4 conversion took place and since then it just took me to a samsung boot window where a yellow window with half written text along with constant vibrations occurred.
I was able to get rid of it by installing Roto JMI v2 rom using Odin. ( Just put the "pit" file and the PDA rom and start. It takes about 5 minutes and my device is working again! P.S its a pretty good rom. Blazing fast!
You can get it here along with instructions : http://forum.xda-developers.com/showthread.php?t=939360
Cheers!
Related
Hello all!
My wife just bought the Galaxy S in Mexico city, It came loaded with a lot of the carrier crap, and with some blocked apps.
I unbranded the phone through Odin and loaded the JM8 firmware, for leave it ready to some froyo ROM.
I am new using the Odin tool, and its way of flashing (I came from wizard-kaiser-X10), but i believe i get it working quite well.
Now, I need some advice, when I was trying to flash JPM the Odin application keeps running trying to install the modem .bin, and just hangs in there.
I got a couple of Phone-!-PC screens, but I was able to get in to download mode, but every time I tried to flash JPM or JP6 I get stuck in there.
I just read the whole Readme pin topic, but I cant get any answer to this prolem, so if anyone can point me to right direction its going to be very much appreciated.
I believe I have to gain root access in the actual firmware installed and then flash JPM, is this right?
PD I was very scared at the first Phone-!-PC screen, but the can easily get in to downlad mode after leaving the battery out for a couple of minutes. XD
So I tried to flash the rom of my galaxy tab.
I first flashed it to JM6, everything fine
Then to JMA, everything fine
Then to JMF, and the tab did not reboot, it went into recovery mode.
I tried rebooting again, it got stuck at Samsung logo, I went to recovery mode and wiped data and rebooted again and it again was stuck at the Samsung logo, I tried doing this 3-4 times and it was always stuck at samsung logo.
I tried flashing it again and no luck.
Then I tried flashing a different rom, the JHA from Roto, and odin failed.
Now my tab has picture I havent seen anywhere else, A phone picture - A PC picture and in between there is a yellow triangle with ! in it.
I can not go to download mode, can not go to recovery mode!
Stuck like this, can anyone help?
ok so when I have the phone+yellow exclamation+computer pics, i used odin to flash it again, and it did flash!
after the flash the screen became the normal download mode, i rebooted and it got stuck again at samsung logo, i did the wipe data thing on recovery mode but it still does not boot, gets stuck at samsung logo.
help please
solved !
went back to base rom jm6, pit csc pda modem files, did boot
then flashed again to jma
now using jma
dont know which rom i should use now, cause jmf did not reboot
Hello everyone,
I have the same problem since yesterday, after wanting to do things too fast. I have a french Tab bought from SFR.
Coming from Roto JME V4, i flashed OC Kernel v2, all fine.
Then when modaco's ext4 kernel drop, i flashed it and did the ext4 conversion : all fine.
On top of that i tried to flash new OC Kernel v6 for ext4, i ended up with freezing home after analysing storage, just like others.
Here's what i did wrong : i didn't backup recovery with CKW has i should have, i tried to flash JME V4 again, thinking it would wipe and i would have started all over again, no matter.
So here i am, odin flash didn't end well, i restart the tab and i have this frightening logo.
Now i would have liked doing like you, flash with odin while this logo's on, but i think the battery's out : whatever i do, tab keeps alterning logo/black screen(like off)/logo/black screen/logo, while pluged ; doesn't show anything if not plugged ; odin can't see anything.
Has anybody got an idea? Just let me know if you need more info (no logcat or screenshot though).
Thanks in advance. Regards,
FF
It sounds like you've probably both had a problem a lot of us have experienced in the past because the JM series ROMS after JM6 do not include dbdata.rfs and this often causes Tabs to error when you enter the recovery console after a flash (or hang at the Samsung logo if you don't go into the recovery console). The way to solve this is either to make sure that the ROM you flash includes dbdata.rfs or flash the dbdata.rfs file from JM6 with Heimdal after you have flashed another ROM. If you look in the topic for the JMG ROM you'll see a number of posts about this and there's a link posted on page 3 to a stock JMG ROM that includes the dbdata.rfs from JM6 and can be flashed straight with Odin.
Hello everyone,
I'm still with the same problem, the Tab don't seem to charge while plugged in, it keeps alternating showing the logo then nothing like the tab's off.
Odin can't see anything as the Tab just keeps turning on & off.
What do you think? screwed? go to shop and play the idiot to get a new tab?
Thanks.
FF
JayJayaa said:
solved !
went back to base rom jm6, pit csc pda modem files, did boot
then flashed again to jma
now using jma
dont know which rom i should use now, cause jmf did not reboot
Click to expand...
Click to collapse
where can I download jm6?
Samfirmware.com
Sent from my GT-P1000 using XDA App
hope u got this fixed man
bdl1969 said:
It sounds like you've probably both had a problem a lot of us have experienced in the past because the JM series ROMS after JM6 do not include dbdata.rfs and this often causes Tabs to error when you enter the recovery console after a flash (or hang at the Samsung logo if you don't go into the recovery console). The way to solve this is either to make sure that the ROM you flash includes dbdata.rfs or flash the dbdata.rfs file from JM6 with Heimdal after you have flashed another ROM. If you look in the topic for the JMG ROM you'll see a number of posts about this and there's a link posted on page 3 to a stock JMG ROM that includes the dbdata.rfs from JM6 and can be flashed straight with Odin.
Click to expand...
Click to collapse
hi! can u give me a link for this exact thread u're refering to! as i searched it on the forum and could not find it! i too have a tab with the same problem! itjust hangs at samsung logo! but no issues with the bootloader! it came to me this way! i think the dbdata.rfs is missing! as i tried flashing a older rom too but didn't fix the issue!
WBR
ReyTech.
Hello All,
I've been using Darky's rom on my SGS for a while now. It Works perfectly! i am very glad about it. (now running on Darkys_v9.3 Extreme Final)
but when i heared about overclocking my Galaxy S from 1ghz to 1.2ghz I was a little over exited.
I found this link on XDA-developers:
http://forum.xda-developers.com/showthread.php?t=746343
here was the link/kernal/zimage posted i used to flash my phone:
http://www.multiupload.com/8UM79T8VNE
I used Odin3 v1.3 and flashed the Zimage 0.06 on it,.
after that it rebooted, and a white screen appeared with a blue kinda looking globe and the words at&t (not really interesting.. so forget about that)
it just didn't came further then that screen, didnt matter how often i restarted my phone.
so I was a little in panic.. so i tried to flash it back with the normal Zimage.tar (CF-Root-JP6-v1.2-Busybox-1.17.1) i used to flash/root my Dark's rom with (I might use the wrong words for these kind of stuff, but ill hope you guys understand it) think that Zimage.tar file is something to root your phone...
anyway, after I did that, I started up, i saw the words "Samsung Galaxy S I900"
just as usual.. but still stucks with it..
I hope somebody could help me with my problem!
I would really appreciate it!
Thanks in advance,
Sten
Flash stock rom with Odin or read Darky pages he has recovery rom or something .
jje
Fixed it by flashing the Speedmod kernel in odin
Thanks anyway! =)
close
I got different problem. After unsuccesful update I get only icon which look like no connection between pc and phone. Unable to turn on phone, only this icon. Any ideas please????????
Remove battery, boot into DL-Mode, reflash with Odin.
My original issue got resolved thanks to s15274n. This mans ROOT walkthrough is amazing!!!!!
NOW I have a problem getting my ROM to load.
Im trying to Install the Malice ROM. and nothing is going quite as smoothely as I think it should.
This is attempt 2, the first time I waited an hour to try and install this rom, straight from SD, and I think the furthest it got was "installing ROM"
nothing. pull the batery out (I assume thats a total noob move, and at beast ill-advisable.) rebooted, went about my day. well, im trying again, and now the furthest ive gotten is "Installing update" the status bar is never filling or scrolling though.
Whats the problem? (going on about 15 minutes with no change btw)
You must use Odin to either
-Flash back to stock so you can reinstall packages
or
-Flash a voodoo integrated kernel so you can flash roms w/ CWM/Voodoo Recovery
Download a voodoo kernel and flash it using odin.
ok, I have the kernal and I have ODIN. once again I have never used ODIN< I definately used a one click root.
does anybody have a link to a thread with *detailed*, hold my hand, walk me through it and pat me on the butt at the end Instructions on this? It's a learning process and damn if im not learning something by the time this is all said and done lol.
last time it sat still for me when it said installing update, it was a bad download. I redid my download of the rom and it went through fast and smoothly. Thats how i fixed my prob maybe it will fix it for u.
I really need some help i want to cry
I got the samsung galaxy s(vibrant) and it doesnt go pass the welcome screen im trying to install a rom but i dont know how have looked over thing i installed odin3 and everything else but when i plug it to the usb it doesnt show on my computer idk why and nothing shows on the id com for odin someone plz tell me this can be fixed please can someone plz plz help me i begg you from the bottom of my heart
i always odin to stock whenever i flashed a new rom, works like a champ all the time.
elmoslonely said:
I got the samsung galaxy s(vibrant) and it doesnt go pass the welcome screen im trying to install a rom but i dont know how have looked over thing i installed odin3 and everything else but when i plug it to the usb it doesnt show on my computer idk why and nothing shows on the id com for odin someone plz tell me this can be fixed please can someone plz plz help me i begg you from the bottom of my heart
Click to expand...
Click to collapse
do you have the .pit and .tar files? Also, are you turning your phone off? There is an awesome guide by s15274n called the noob guide. It goes over very specifically how to root, it also has a small tutorial on rooting using ODIN3. Search the q&a forum, i believe thats where the guide is.
Also just to clarify, im not saying ur a noob or inept, im just saying its a super awesome guide. My phones neen rooted for three days now, ive flashef a bunch of roms and i always flash nack to stock...REALLY helpful tutorial. Good Luck!
Hello everybody, seriously i think I broke my phone but i did it to learn a bit, basically what happened, I installed TWRP Recovery and routed my phone everything gone well. after i have seen a guy talking about ROMs And stuff. I go Samsung Galaxy s7 edge SM-G935F Exynos. I tried to install The ROm via TRWP like everyone do, i followed all steps. on this thread :
http://forum.xda-developers.com/s7-edge/development/rom-bobcatrom-mm-6-0-1-t3404008
I installd this ROM : [ROM][SM-G935/930F]{~BoBCaTROM~}[v.1.0.4][APF2] ~MM 6.0.1~
after the phone stuck booting up and booting up again stuck on samsung logo and then turn off and boot up again, wont finish. after i tried to do the installation again. ive done it 4 times. but still stuck on booting. it made me crazy i thought if i wipe everything gonna work, i made it worse i wiped everything lol even the back up, and the ROM. Im newbie, so maybe i will learn from that. could someone tell me, if i can make the phone like it was ? and how about the efs is it important, how can get it back ? and can i install other ROMs, or thats it im stuck on the original Firmware. thank you.
kingshine2017 said:
Hello everybody, seriously i think I broke my phone but i did it to learn a bit, basically what happened, I installed TWRP Recovery and routed my phone everything gone well. after i have seen a guy talking about ROMs And stuff. I go Samsung Galaxy s7 edge SM-G935F Exynos. I tried to install The ROm via TRWP like everyone do, i followed all steps. on this thread :
http://forum.xda-developers.com/s7-edge/development/rom-bobcatrom-mm-6-0-1-t3404008
I installd this ROM : [ROM][SM-G935/930F]{~BoBCaTROM~}[v.1.0.4][APF2] ~MM 6.0.1~
after the phone stuck booting up and booting up again stuck on samsung logo and then turn off and boot up again, wont finish. after i tried to do the installation again. ive done it 4 times. but still stuck on booting. it made me crazy i thought if i wipe everything gonna work, i made it worse i wiped everything lol even the back up, and the ROM. Im newbie, so maybe i will learn from that. could someone tell me, if i can make the phone like it was ? and how about the efs is it important, how can get it back ? and can i install other ROMs, or thats it im stuck on the original Firmware. thank you.
Click to expand...
Click to collapse
Just use Odin to flash a stock rom.
Install stock via Odin and try again.
If at first you do not succeeded, try and try again.
Out of interest, When you installed the ROM, how long did you wait before restarting the device.
(How long did you leave it on the Samsung Startup logo)
I know Stock modded ROMS when first install can sometimes take upto 10 - 15 minutes to Boot for the first time.
(I remember waiting 20 minutes one time on my note 3)
Delete
Thank you
My phone come back to normal thank you very much guys
The way to fix this is pretty straight forward and there are many tutorials online on how to do this.
You will need your stock rom (can be acquired from SamMobile) and Odin (i recommend using 3.0.7) and then plugging your device in to your windows computer (does not work on any other os) and reflashing back to your stock rom. This will 100% work and you should just go to YouTube and search for "How to reflash stock Galaxy S7" after downloading your stock rom.
Joshpace92 said:
The way to fix this is pretty straight forward and there are many tutorials online on how to do this.
You will need your stock rom (can be acquired from SamMobile) and Odin (i recommend using 3.0.7) and then plugging your device in to your windows computer (does not work on any other os) and reflashing back to your stock rom. This will 100% work and you should just go to YouTube and search for "How to reflash stock Galaxy S7" after downloading your stock rom.
Click to expand...
Click to collapse
i have a question, how do i know what firmware to get
i mean there are a lot of them from different countries and different pda csc numbers
do i have to choose one that matches my base band or something like that?
jcpineda said:
i have a question, how do i know what firmware to get
i mean there are a lot of them from different countries and different pda csc numbers
do i have to choose one that matches my base band or something like that?
Click to expand...
Click to collapse
You must choose the firmware that is correct for your model for example if I had a Galaxy S7 and the model number for it is SM-G9358 i'd then choose the one that says its for the SM-G9358 as well as my carrier for example Optus if there is no correct carrier version then just choose one that is from your country it wont make a huge difference you'll be fine.
If you do not know how to find the model number for your phone it should be somewhere in Settings>About or when you are booting on your device.
Let me know if you need any further assistance.