Database Users

[Q] I believe I have also soft bricked my Rogers (Canadian) S4 i337m

Hi all,
I think I have soft bricked my S4 i337m rogers Canadian variant.
I had rooted / unlocked the bootloader with motochopper successfully.
- I am using CWM
First thing I tried to do was backup the phone onto the external SD which would not work so I just went onto the next step.
I tried flashing a ROM onto the phone after doing phone restore and clearing cache. All installed correctly (apparently) and now when I boot up the phone the Samsung logo will appear for about 5 seconds then the phone will go black and try to boot up again.
The good:
- i have access the recovery mode still
The bad:
- no recovery made for the phone
- seems to be boot looping
As a side not I have tried installing a couple other ROMs which all result in the same issue.
Is there anything that can possibly be done?
I would happily put the stock ROM back on the phone.
All help would be greatly appreciated!
Rob.

9 times out of 10 a factory reset will get you out of a boot loop. Do that in recovery and reboot.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Hi thanks for the reply. I have tried the factory reset and still does not fix the issue

Robby29 said:
Hi thanks for the reply. I have tried the factory reset and still does not fix the issue
Click to expand...
Click to collapse
If you are flashing a custom ROM that is not specifically for your phone, say a i9505 rom, you need to flash a Canadian kernel right after or you will bootloop. You also cannot flash any loki based roms either. As for the CWM backups, are you trying to back up to your external SD? If so, ensure the card is formatted fat32. To help get through your softbrick, just get into download mode and flash with odin

kiru said:
If you are flashing a custom ROM that is not specifically for your phone, say a i9505 rom, you need to flash a Canadian kernel right after or you will bootloop. You also cannot flash any loki based roms either. As for the CWM backups, are you trying to back up to your external SD? If so, ensure the card is formatted fat32. To help get through your softbrick, just get into download mode and flash with odin
Click to expand...
Click to collapse
Okay great I will try these. Does the kernel have to be specific to the ROM?

Robby29 said:
Okay great I will try these. Does the kernel have to be specific to the ROM?
Click to expand...
Click to collapse
The kernel is specific to your device. so you would use the i337M kernel.
So the procedure would be flash the rom of your choice, then before you boot flash YOUR i337M kernel, it will boot.
Good luck.

And make sure you do not flash a rom for the i9500 as you will hard brick

Also,
Make sure you choose the right i337m kernel. ie. a TouchWiz kernel for TW Roms and an AOSP kernel for CM10.1/AOSP Roms.
You should be able to:
remove your sdcard,
format it to fat32,
download the correct rom and kernel for you i337m to your freshly formatted sdcard,
put the card back into your phone,
boot into recovery,
install ROM zip from ext-sdcard,
install Kernel zip from ext-sdcard,
reboot.
phew....sounds like a lot of steps but not really I guess.

we good up in here....

Soft Brick S4
TheAxman said:
we good up in here....
Click to expand...
Click to collapse
Hello,
Greetings to you, I am sorry you have come to this point. I myself have bricked my phone just yesterday from flashing a bad ROM and not backing up my ROM properly. But I hope I can help you with some tips that i did to recover my phone fully. I apply some links to help you out but I recommend some patience lots of HW. ( Kies didn't work for me bugger =p.)
Unbrick S4 [Guide] -- http://forum.xda-developers.com/showthread.php?t=2265477&page=40
there is a user by the name of samersh72. you can request for a link to download your correct firmware it's best to get back to stock, ( don't forget to thank the user . )
this is someones video on youtube: http://www.youtube.com/watch?v=3a3qghhpDxg ( this helped me out as well)
I have these files/programs readied when I reverted back to stock
odin 1.3 ( i have odin 3.0 and didn't work for me reverting stock as it couldnt detect my tar.md5 file, but for some reason it worked for odin 1.3)
have your correct firmware ( I downloaded mine from http://www.sammobile.com, but for some reason I can't find yours, there is one on this site for sure just have the patience to look) make sure its for your correct carrier too.
im pretty sure you know how to do the DL mode, but just incase ill assume that you may or may not know, ill type this in anyway:
Get your S4 Download mode, [pressing up+power+home], (sometimes if i feel its not kicking in, just quick release then do it again)
open your odin 1.3, plug your phone in, tick auto-reboot, and F. reset time. PDA ticked, then find your correct firmware. hit start, then i hope from this something good will come out.
Best of wishes in your journey here in xda.
Cheers!

car154 said:
Hello,
Greetings to you, I am sorry you have come to this point. I myself have bricked my phone just yesterday from flashing a bad ROM and not backing up my ROM properly. But I hope I can help you with some tips that i did to recover my phone fully. I apply some links to help you out but I recommend some patience lots of HW. ( Kies didn't work for me bugger =p.)
Unbrick S4 [Guide] -- http://forum.xda-developers.com/showthread.php?t=2265477&page=40
there is a user by the name of samersh72. you can request for a link to download your correct firmware it's best to get back to stock, ( don't forget to thank the user . )
this is someones video on youtube: http://www.youtube.com/watch?v=3a3qghhpDxg ( this helped me out as well)
I have these files/programs readied when I reverted back to stock
odin 1.3 ( i have odin 3.0 and didn't work for me reverting stock as it couldnt detect my tar.md5 file, but for some reason it worked for odin 1.3)
have your correct firmware ( I downloaded mine from http://www.sammobile.com, but for some reason I can't find yours, there is one on this site for sure just have the patience to look) make sure its for your correct carrier too.
im pretty sure you know how to do the DL mode, but just incase ill assume that you may or may not know, ill type this in anyway:
Get your S4 Download mode, [pressing up+power+home], (sometimes if i feel its not kicking in, just quick release then do it again)
open your odin 1.3, plug your phone in, tick auto-reboot, and F. reset time. PDA ticked, then find your correct firmware. hit start, then i hope from this something good will come out.
Best of wishes in your journey here in xda.
Cheers!
Click to expand...
Click to collapse
Thanks for posting this. I hope many people read it. Anyone who flashes needs to know how to return to stock before they start flashing roms. You will need it someday!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Please can anyone help? "Kernel is not seandroid enforcing" N910C Apologies in advanc

Please can anyone help? "Kernel is not seandroid enforcing" N910C Apologies in advanc
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....

Buggereditup said:
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Click to expand...
Click to collapse
You could have flashed a Stock ROM first / fresh and then try out other ROMSs.

Buggereditup said:
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Click to expand...
Click to collapse
yeah , a stock rom would really help.. (try flashing cf-auto root if you only wanna root it)

Captain Droid said:
You could have flashed a Stock ROM first / fresh and then try out other ROMSs.
Click to expand...
Click to collapse
Yes, possibly...
However, what I did was try to back up the supplied ROM first.
So that I would be less likely to bugger it up
I'm not sure that it has the OEM ROM tbh.

ArmanFGT said:
yeah , a stock rom would really help.. (try flashing cf-auto root if you only wanna root it)
Click to expand...
Click to collapse
Hi,
I don't think I can flash anything at the moment ?
All I'm getting is "Kernel is not seandroid enforcing" in a loop.
Not sure where or how to start
V+ & home & power does go to Team Win Recovery Project v2.8.7.0
Can I do anything useful from there ?
TIA...

well, by flashing i meant downloading a frimware from sammobile or... and using odin to install the stock rom , dont let that "kernel not seandroid enforcing" get on you nerve that one doesnt really matter , only way to solve your prob is to install a stock frimware...
about the slow download speed try searching the latest frimware name on google and a direct link from another download site might probably come up...

ArmanFGT said:
only way to solve your prob is to install a stock frimware....
Click to expand...
Click to collapse
I don't have a stock firmware, I'm not even sure what the correct firmware is.
I'm in exactly the situation I was trying to avoid....
I have tried to install a firmware from TWRP but it failed.
I'm not sure where to start or what I can do with the phone as it is...

Buggereditup said:
I don't have a stock firmware, I'm not even sure what the correct firmware is.
I'm in exactly the situation I was trying to avoid....
I have tried to install a firmware from TWRP but it failed.
I'm not sure where to start or what I can do with the phone as it is...
Click to expand...
Click to collapse
of course it would fail . which country do you live in?
try using this :
http://www.sammobile.com/firmwares/database/SM-N910C/
PDA Name is your Correct frimware Name...

ArmanFGT said:
of course it would fail . which country do you live in?
try using this :
http://www.sammobile.com/firmwares/database/SM-N910C/
PDA Name is your Correct frimware Name...
Click to expand...
Click to collapse
Hi,
I'm in the UK, though it did say Poland in the settings (can't access them now) it also mentioned the united arab emirates ?
I don't think I can find the PDA if the phone won't boot ?

Buggereditup said:
Hi,
I'm in the UK, though it did say Poland in the settings (can't access them now) it also mentioned the united arab emirates ?
I don't think I can find the PDA if the phone won't boot ?
Click to expand...
Click to collapse
i bought the phone when i was in india and i flashed the ROM which was released in some other country. Now im in saudi. Its working for me perfectly.
I guess the only solution for your problem is to download a stock version and flash using Odin. Then you can start trying other ROMs and so.
It will work 100% for sure.
Thanks.

Captain Droid said:
I guess the only solution for your problem is to download a stock version and flash using Odin. Then you can start trying other ROMs and so.
It will work 100% for sure.
Click to expand...
Click to collapse
I'm trying - but as I was trying to back up the ROM is came with and failed I don't have a back up.
I'm looking at some ROMs but I don't know which one would be stock or correct for this phone.
How do I tell ?
TIA

Hi,
I could really do with being pointed in the right direction.
I am trying to get a working ROM onto a N910C - nothing I've tried so far is even close to working.
The N910C has WKRP installed now, which I am not familiar with, having only used CWM before.
Will this work ? http://www.ibtimes.co.uk/samsung-releases-android-5-1-1-ota-update-galaxy-note-4-sm-n910c-1517429
Can I install from TWRP ?
How do I tell if a ROM is compatible ?
Is there any way of telling if on of these might be work ? http://www.sammobile.com/firmwares/database/SM-N910C/
Still very stuck
TIA...

Buggereditup said:
Hi,
I could really do with being pointed in the right direction.
I am trying to get a working ROM onto a N910C - nothing I've tried so far is even close to working.
The N910C has WKRP installed now, which I am not familiar with, having only used CWM before.
Will this work ? http://www.ibtimes.co.uk/samsung-releases-android-5-1-1-ota-update-galaxy-note-4-sm-n910c-1517429
Can I install from TWRP ?
How do I tell if a ROM is compatible ?
Is there any way of telling if on of these might be work ? http://www.sammobile.com/firmwares/database/SM-N910C/
Still very stuck
TIA...
Click to expand...
Click to collapse
Download this. This is the latest Lollipop ROM for SM-N910C. Download and flash this using Odin.
Vol down + Home Button + Power Button, Then connect the phone to the Pc and flash with odin.
If its confusing for you then READ THIS tutorial. Read completely and follow the instructions . . . this will work because i used the same method.

Captain Droid said:
Download this. This is the latest Lollipop ROM for SM-N910C. Download and flash this using Odin.
Vol down + Home Button + Power Button, Then connect the phone to the Pc and flash with odin.
If its confusing for you then READ THIS tutorial. Read completely and follow the instructions . . . this will work because i used the same method.
Click to expand...
Click to collapse
Hi,
Thanks that's what I've been trying to do, downloaded 3 ROMs before you suggested that one. Finally worked out that unzipping them in windows was causing errors (reason unknown) switched to a different zip program and the ROMs are ok now. Still wouldn't install in Odin, switched to a different PC - same problem - bought a new quality USB lead and I've now installed the ROM suggested by you, I don't know whether the other ROMs would have installed as I didn't try with the new USB cable.
All the operations in Odin carried out successfully, I've now got a slightly different problem - when Odin finished, the phone booted:
"Samsung Galaxy Note 4" "powered by Android" then just SAMSUNG logo in the middle of the screen with some music - then back to the "Samsung Galaxy Note 4" "powered by Android"
I've had to take the battery out to stop the bootloop - I have looked for answers to this: https://www.androidfilehost.com/?fid=23501681358554645
I'm a bit reluctant to randomly try fixes in case I make it worse ?
If anyone can help me out of the boot loop ?

Buggereditup said:
Hi,
Thanks that's what I've been trying to do, downloaded 3 ROMs before you suggested that one. Finally worked out that unzipping them in windows was causing errors (reason unknown) switched to a different zip program and the ROMs are ok now. Still wouldn't install in Odin, switched to a different PC - same problem - bought a new quality USB lead and I've now installed the ROM suggested by you, I don't know whether the other ROMs would have installed as I didn't try with the new USB cable.
All the operations in Odin carried out successfully, I've now got a slightly different problem - when Odin finished, the phone booted:
"Samsung Galaxy Note 4" "powered by Android" then just SAMSUNG logo in the middle of the screen with some music - then back to the "Samsung Galaxy Note 4" "powered by Android"
I've had to take the battery out to stop the bootloop - I have looked for answers to this: https://www.androidfilehost.com/?fid=23501681358554645
I'm a bit reluctant to randomly try fixes in case I make it worse ?
If anyone can help me out of the boot loop ?
Click to expand...
Click to collapse
i am not sure why the boot loop, you sure you followed the right steps while flashing using ODIN ?
and the link you have mentioned , its for Note 3 right ??

Buggereditup said:
Hi,
Thanks that's what I've been trying to do, downloaded 3 ROMs before you suggested that one. Finally worked out that unzipping them in windows was causing errors (reason unknown) switched to a different zip program and the ROMs are ok now. Still wouldn't install in Odin, switched to a different PC - same problem - bought a new quality USB lead and I've now installed the ROM suggested by you, I don't know whether the other ROMs would have installed as I didn't try with the new USB cable.
All the operations in Odin carried out successfully, I've now got a slightly different problem - when Odin finished, the phone booted:
"Samsung Galaxy Note 4" "powered by Android" then just SAMSUNG logo in the middle of the screen with some music - then back to the "Samsung Galaxy Note 4" "powered by Android"
I've had to take the battery out to stop the bootloop - I have looked for answers to this: https://www.androidfilehost.com/?fid=23501681358554645
I'm a bit reluctant to randomly try fixes in case I make it worse ?
If anyone can help me out of the boot loop ?
Click to expand...
Click to collapse
Maybe the version that your phone was running was "coj5" Build of 5.1.1. this is the latest build of 5.1.1 and it basically locks down your phones bootloader you can't flash any old 5.1.1, 5.0.1 or 4.4.4 firmwares just go to http://www.sammobile.com/firmwares/database/SM-N910C/PAK/ and download the top firmware which is coj5. flash it and it might take you out of the bootloop (do a factory reset first) it will lock your bootloader to run only 5.1.1 or newer builds but since you have already tried other roms i think its worth it atleast you will have a working phone. (don't worry about csc being PAK it does not have any additional bloat)

Just in case it's of any help to anyone in the future.....
The unzipping problem was down to unzipping inside windows - as soon as I used winrar, no more corrupt files.
The install from Odin problem was down to a knackered USB cable.
Many thanks to Captain Droid and everyone else.
I got out of the last bootloop by repeatedly wiping the caches, after about 3 wipes it booted and seems to be running ok...
I'm very pleased to have it working again
Is there's a safe/best way to try other ROMs or is it a case of best leave alone ?
Less bloatware would be nice - or is there a way to properly remove some of it ?
I have N910CXXU2COL2_N910COLB2COL1_THL installed atm
What's the best currently available custom ROM for the N910C ?

Do not be afraid to ask dumb questions; they are easier to handle than dumb mistakes
Is there any obvious reason why Rom Manager can't install a custom recovery with this Rom ?

Captain Droid said:
Download this. This is the latest Lollipop ROM for SM-N910C.
Click to expand...
Click to collapse
Hi,
I've installed this and am grateful to have a working ROM. I thought that after installing this, I would be able to install other ROMs ?
I would like to back up EFS and the current install before trying to install another ROM, ROM Manager won't work, so I have tried to back up EFS from Philz Touch Recovery, that hasn't worked either. It couldn't write to SD1 but claimed to have written to the phone, but hadn't.
I've also tried to install Sixperience from Philz, without any success - another bootloop. I eventually managed to reinstall the THL ROM via Odin.
Is it possible to back up EFS from the THL ROM ?
Can I install sixperience from Odin ?
Is sixperience the best ROM to try ?
TIA.....

Buggereditup said:
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Click to expand...
Click to collapse
Hi
I face the same problem last 2 month ago ,,, & Solution it was very Easy but not seen ,,, ok listen first you should do start with the following steps & your phone will be alive again ^_^ :
1. Download & install Kies ======>> http://www.samsung.com/us/smart-switch/assets/downloads/SmartSwitchPC_setup.exe
2. Choose Recovery Mode in Kies.
3. Follow the steps on Kies & do what he is saying
4. Don't' forget to put your phone in Download Mode.
Fi you need any help Contact me Thx ^_^
.

I've tried everything - someone please help

The Core Prime will not boot into recovery, or safe mode, or to the home screen. The only way to sometimes get it into download mode is leave it plugged into the wall charger for a couple minutes, then it will SOMETIMES go into download mode to charge. Holding down every combination of keys does not work, please don't suggest holding down keys.
All I ever see is a mmc confirmation fail movinand checksum confirmation fail error no matter what I try. I never see the Samsung intro, boot intro, or tracfone intro anymore, just a black screen that leads to that error message in red letters.
Regardless of which computer or cable I use, Windows never sees the phone. Doesn't try to install the drivers, doesn't make a sound that something was plugged in, nothing shows up in device manager, nothing (even in download mode)
I called 800 Samsung (4 times asking the same thing to different people to make sure I didn't just get helped by a noob over the phone). I went and talked to the Samsung guys inside worst buy (didn't do anything except informing me there is a Samsung store in LA). I called the Samsung store in LA and talked to a technician and the technician supervisor (I could drive there if their answer wasn't factory reset)
But EVERYONE from Samsung is saying all that can be done is factory reset.
I do not need a factory reset. I need my data.
I have posted numerous threads, and even though there was good advice given, none of it worked.
All I did before this error was try to update Google maps. The phone has never been backed up/rooted/nothing its stock.
At this point, I'm willing to negotiate paying someone to get my data back.
Someone please help.

Sorry To Hear that this is really a big problem but every thing has a solution ..
As you say the windows doesn't read the device and so as Odin try http://tinyurl.com/Heimdall-oa on Linux (don't use virtual machine )
OK if Heimdall read the device flash stock firmware (same version) if the device open congratulations
else flash custom recovery (you can find one in cyanogen discussion) and launch aroma file manager pull out your data so you're safe to reset ?? hope to be helped you .

The x man said:
Sorry To Hear that this is really a big problem but every thing has a solution ..
As you say the windows doesn't read the device and so as Odin try http://tinyurl.com/Heimdall-oa on Linux (don't use virtual machine )
OK if Heimdall read the device flash stock firmware (same version) if the device open congratulations
else flash custom recovery (you can find one in cyanogen discussion) and launch aroma file manager pull out your data so you're safe to reset ���� hope to be helped you .
Click to expand...
Click to collapse
Thank you for trying to help me. I do not yet have a Linux box set up. Can you recommend a distro, version, or live cd of Linux to use?

You can use Ubuntu 14.04

The x man said:
You can use Ubuntu 14.04
Click to expand...
Click to collapse
I will post my results here as soon as I try

If your phone is still stuck, flash TWRP (google it if you don't know it) for s820l. After TWRP is installed backup your data to your Internal or External Storage. Once the backup is complete factory reset (I highly suggest bakcking up to an SD card) if it still only boots to this screen try flashing the Stock ROM.
If your phone is messed up after the factory reset, i suggest SD card for files and everything if your computer has an SD adapter and reader you won't need to turn the device on. Hopefully this fixes it for you.
P.S. By no means do I know exactly what I'm doing, I flashed the wrong TWRP for mine and only got a download screen. This is the method i used to fix it. Also i am not allowed to post links or I would. so google sm-s820l custom recovery and to get a Stock ROM. Above the page for it should be a bunch of tabs that look like this " Android Area 51 > Forum > Straight Talk/Net10 > Samsung Phones > Samsung Galaxy Core Prime > Recovery Releases" Click on Samsung GCP and then your all set. Hope this helps.

AJOKER21 said:
If your phone is still stuck, flash TWRP (google it if you don't know it) for s820l. After TWRP is installed backup your data to your Internal or External Storage. Once the backup is complete factory reset (I highly suggest bakcking up to an SD card) if it still only boots to this screen try flashing the Stock ROM.
If your phone is messed up after the factory reset, i suggest SD card for files and everything if your computer has an SD adapter and reader you won't need to turn the device on. Hopefully this fixes it for you.
P.S. By no means do I know exactly what I'm doing, I flashed the wrong TWRP for mine and only got a download screen. This is the method i used to fix it. Also i am not allowed to post links or I would. so google sm-s820l custom recovery and to get a Stock ROM. Above the page for it should be a bunch of tabs that look like this " Android Area 51 > Forum > Straight Talk/Net10 > Samsung Phones > Samsung Galaxy Core Prime > Recovery Releases" Click on Samsung GCP and then your all set. Hope this helps.
Click to expand...
Click to collapse
Core prime model is also G-360* (main number) not just SM-820L .

The x man said:
Core prime model is also G-360* (main number) not just SM-820L .
Click to expand...
Click to collapse
True so if it's not the SM-S820L just input your model number instead of the one I posted that was my bad I assumed TracFone. Also don't think just because the phone is the same they will all work if you do use the wrong TWRP or ROM because the model is different it will brick your device. Again it was my mistake but overall I hope this helps.

AJOKER21 said:
True so if it's not the SM-S820L just input your model number instead of the one I posted that was my bad I assumed TracFone. Also don't think just because the phone is the same they will all work if you do use the wrong TWRP or ROM because the model is different it will brick your device. Again it was my mistake but overall I hope this helps.
Click to expand...
Click to collapse
Never mind i just wanted to share info. + mine reply was before twrp or cwm being ported to core prime ,and at this time no custom roms for 360* Models

Is TWRP ported to other versions of this phone? It seems like it is atleast the VE one has it and my TracFone version does I'm sure most of the others ones do and you also do not need a Custom ROM just a stock one which is probably floating around out there somewhere. For the OPs phone which if the model was posted this would be a billion times easier. So Mr. OP please post your model for us to help if your issue is still happening.

G360 Rom
AJOKER21 said:
True so if it's not the SM-S820L just input your model number instead of the one I posted that was my bad I assumed TracFone. Also don't think just because the phone is the same they will all work if you do use the wrong TWRP or ROM because the model is different it will brick your device. Again it was my mistake but overall I hope this helps.
Click to expand...
Click to collapse
I have a SM-S820L that i flashed with a 360 and now its bricked

Hii @android_n this is also happen with me on My core 2 G355H I also try to flash Offical frimware but it only boot for few second and shut down
I replace battery with new one and it booted
Problem is in battery it only boot when charger is connect or you can charge your phone battery by booster charger hit thanks if I help

I tried that what i need is a new OS. It keeps telling me No OS is installed but Havent been able to get it installed

noxqes said:
I tried that what i need is a new OS. It keeps telling me No OS is installed but Havent been able to get it installed
Click to expand...
Click to collapse
Check out this thread here http://forum.xda-developers.com/gal...stock-rom-deodex-busybox-root-t3378999/page1. Hope this helps
Sent from my SM-G360T1 using XDA Labs

Phone stuck in bootloop after device reset and installing stock rom

The phone of my girlfriend has been stuck in a bootloop for a few days. It happened while she watched a video. Apparently at the same time she got a message that her phone ran out of space. Then it crashed and has been stuck in the loop since then. Her phone is not rooted. She did restore the device to default settings using recovery mode. This didn't do anything however.
I've tried using ODIN 3.12.3 to flash the newest rom from sammobile since her carrier is T-Mobile. I followed a guide from adnroid central since I never had done anything like this before. It all worked as far as ODIN goes but is still stuck in the bootloop. I'd link the guide but I need 10 posts before I can include outside links.
I'm not sure what the next step would be. If I should try an older ODIN version or use a different stock rom. Before the whole incident her android version was 6.0.1 I believe. Also in the download mode the product name is SMG-900T.
I hope someone can point me in the right direction on what to do. Thank you!

beerbat123 said:
The phone of my girlfriend has been stuck in a bootloop for a few days. It happened while she watched a video. Apparently at the same time she got a message that her phone ran out of space. Then it crashed and has been stuck in the loop since then. Her phone is not rooted. She did restore the device to default settings using recovery mode. This didn't do anything however.
I've tried using ODIN 3.12.3 to flash the newest rom from sammobile since her carrier is T-Mobile. I followed a guide from adnroid central since I never had done anything like this before. It all worked as far as ODIN goes but is still stuck in the bootloop. I'd link the guide but I need 10 posts before I can include outside links.
I'm not sure what the next step would be. If I should try an older ODIN version or use a different stock rom. Before the whole incident her android version was 6.0.1 I believe. Also in the download mode the product name is SMG-900T.
I hope someone can point me in the right direction on what to do. Thank you!
Click to expand...
Click to collapse
Have you tried flashing the marshmallow boot loader in odin?

RomBetaTester said:
Have you tried flashing the marshmallow boot loader in odin?
Click to expand...
Click to collapse
I'm not sure what you mean since I'm quite new to anything android. Would this be what you are talking about? I know it says only for S5 G900F and I have the G900T but would the overall process be the same?
Thank you for the reply though!

beerbat123 said:
I'm not sure what you mean since I'm quite new to anything android. Would this be what you are talking about? I know it says only for S5 G900F and I have the G900T but would the overall process be the same?
Thank you for the reply though!
Click to expand...
Click to collapse
Google search for marshmallow bootloader and flash it through Odin. I am very good with android. I can fix your problem. Is there anyway you could direct message me?

is there any very helpful s8 owner who could take a complete system backup

is there any very helpful s8 owner who could take a complete system backup and i can restore that should i used this? would rlly appreciate it. I failed with rooting very hard and dumb of me. and i got help from a other guy that fixed a lot. but when we want to reboot it bootloops on my samsung flashing screen. and the guy that helped me didnt know either what to do anymore because he tried already a lot. so he's last idea was using a complete system backup from a s8 owner. i cant use my Phone since sunday and i rlly had some important message i need to read. thank you for reading this far i will hope for a good respond.
you can add me on discord: Peter r de Vries#3776

jesseija said:
is there any very helpful s8 owner who could take a complete system backup and i can restore that should i used this? would rlly appreciate it. I failed with rooting very hard and dumb of me. and i got help from a other guy that fixed a lot. but when we want to reboot it bootloops on my samsung flashing screen. and the guy that helped me didnt know either what to do anymore because he tried already a lot. so he's last idea was using a complete system backup from a s8 owner. i cant use my Phone since sunday and i rlly had some important message i need to read. thank you for reading this far i will hope for a good respond.
you can add me on discord: Peter r de Vries#3776
Click to expand...
Click to collapse
Ummmm Flash your current firmware through odin you dont need a s8 users backup there is a barage of stock firmwares to restore from all over the internet

yeah that doesnt work already tried that

jesseija said:
yeah that doesnt work already tried that
Click to expand...
Click to collapse
What is the error you are receiving. Odin will flash and fix all but knox 0x1

My phone flashes ROM fine, But it gets stuck at pulsing Samsung logo after flashing them, It was fine before rooting the device.

jesseija said:
My phone flashes ROM fine, But it gets stuck at pulsing Samsung logo after flashing them, It was fine before rooting the device.
Click to expand...
Click to collapse
Which model 950 U,f,w.
You know it takes about 5 to 10 min to also boot from that.

My model is SM-G950F and yeah i know that it can take like 10 minutes to boot

jesseija said:
My model is SM-G950F and yeah i know that it can take like 10 minutes to boot
Click to expand...
Click to collapse
Last time I reset my phone it took forever to reset. Try redoing the process but give it plenty of time. Also, don't worry about it heating up.
If you had any message saved on the phone you won't be able to view it after a reset.
Try taking these precautions next time you reinstall firmware:
Make sure you have the right firmware for your country code (it's usually on a sticker on the box or when you go in download mode: power+volume up+bixby)
Make sure you have the latest Samsung Drivers for Mobile installed on your pc, this usually leads to bootloops if not installed before flashing
Ensure you have the original cable that came with the box connected as it has information that's not found on other wires
Make sure you have the most recent version of Odin. I recommend uninstalling anything you have on your pc and reinstalling the files from the beginning so nothing mixes up
These really helped when I got MY phone stuck in a bootloop...twice...

It happened after only official released binaries are allowed to be flashed. but got someone a s8 backup?

bump
bump