Hello all!
My wife just bought the Galaxy S in Mexico city, It came loaded with a lot of the carrier crap, and with some blocked apps.
I unbranded the phone through Odin and loaded the JM8 firmware, for leave it ready to some froyo ROM.
I am new using the Odin tool, and its way of flashing (I came from wizard-kaiser-X10), but i believe i get it working quite well.
Now, I need some advice, when I was trying to flash JPM the Odin application keeps running trying to install the modem .bin, and just hangs in there.
I got a couple of Phone-!-PC screens, but I was able to get in to download mode, but every time I tried to flash JPM or JP6 I get stuck in there.
I just read the whole Readme pin topic, but I cant get any answer to this prolem, so if anyone can point me to right direction its going to be very much appreciated.
I believe I have to gain root access in the actual firmware installed and then flash JPM, is this right?
PD I was very scared at the first Phone-!-PC screen, but the can easily get in to downlad mode after leaving the battery out for a couple of minutes. XD
Related
Hi all,
I really need you guys help there..
I own a Asian version galaxy tab...
I first wanted to try out modaco r3 kernel so i flash the non-EXT4 version and it brings me to boot loop( doesn't get pass first samsung screen....)
then i had no clue about what to do and decided to flash back to HK rom with odin and when it is done it does get pass the first screen but it is now stuck and the samsung screen...where it occasionally vibrate and is stuck there
I really have no clue what's going on and it's the first time i encountered such problem since I've been a member in xda
I really hope if anyone can help out and lead me somewhere i can just turn my tab on and use it..
many thanks..
-Wilson
Also I've root my phone before and when i am done with the odin flash for the firmware...it actually gets me into recovery instead of to reboot directly
not sure what else is needed for you guys to help out...but if i can provide anything, please let me know
@season007
I encountered a similar problem just yesterday night while trying to flash to the New Modaco Kernel and Rom. While flashing the kernel, ext4 conversion took place and since then it just took me to a samsung boot window where a yellow window with half written text along with constant vibrations occurred.
I was able to get rid of it by installing Roto JMI v2 rom using Odin. ( Just put the "pit" file and the PDA rom and start. It takes about 5 minutes and my device is working again! P.S its a pretty good rom. Blazing fast!
You can get it here along with instructions : http://forum.xda-developers.com/showthread.php?t=939360
Cheers!
I tried to install CWM earlier today and its gone wrong and now i get the dreaded error message
Firmware upgrade encountered an issue etc
Kies wont recover it either.
Now im hoping i can get it going again quickly
Just from skimming through here while trying to pack i gather i need to use odin to reflash the stock firmware.
I wouldnt normally ask but could some nice person spoon feed me given the circumstances of time constraints
Gavin01 said:
I tried to install CWM earlier today and its gone wrong and now i get the dreaded error message
Firmware upgrade encountered an issue etc
Kies wont recover it either.
Now im hoping i can get it going again quickly
Just from skimming through here while trying to pack i gather i need to use odin to reflash the stock firmware.
I wouldnt normally ask but could some nice person spoon feed me given the circumstances of time constraints
Click to expand...
Click to collapse
All you need to do is search google. No one spoon feeds you in real life so no one shouldn't spoon feed you here also.
http://forum.xda-developers.com/showthread.php?t=2261573
You need to follow these instructions but you need to download your correct firmware.
Sent from my SAMSUNG-SGH-I337
Use Odin to flash stock firmware by following this guide, I assume that you have the i9505, if so then flash this CWM,
thanks i need to find the right rom now
thanks fingers crossed
EDIT
im guessing this is the right rom
I9505XXUBMEA_I9505OXXBMF1_XEF.zip
thanks guys weve done it!
its resurrected!
cheers
I stuffed my phone up again and thought id post here instead of making a new thread.
flashed the latest modem which in turn has for some reason fubored all my dialling out and messages etc so i cant use the phone for anything other than browsing .....
I9505XXUBMEA_I9505OXXBMF1_XEF.zip<<<<<<<<<<<<this is what i used last time and it didnt work this time
so ive now tryed this one I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5
my phone is a sim free s4.
the second one appears to work but wont get passed the lock screen with out continuous errors. (i note i now have the knox label in the bootloader)
How do i find the latest stock rom for my phone? so i can start again?
thanks
I had exact same issue so i falshed XXUFNB9 from sammobile and now im rooted runnin cm11 m9 .
Do suggest UNISTALLING samsung usb drives from pc and reinstalling fresh new ones for your device snd then flashing. I flashed 4 different firmwares. It was only until i reinstalled s4 usb drives my phone becsme alive. Dunno how but i reckon usb drives is the issue
Well, I broke my phone.
My earpiece boost stopped working and I could barely hear on the phone, the new Facebook app was crashing Facebook constantly and I was getting random reboots yesterday so I figured I would go for something new.
Because this was my first rom on my S4, I figured I should go back to stock first, bad idea. I loaded Odin up, went to flash the stock firmware to install the newest version of Sacs rom, and it failed right at NAND write start!!
I even went online and downloaded a newer firmware (February) and that failed also. I can't do the emergency fix in Kies and I can't use the other option in Kies because it says my serial is incorrect
I don't know what to do at this point, but I desperately need my phone ASAP in case my boss calls me.
Any help appreciated.
April
Well you REALLY don't give much info.
What version of Android were you on when you got your phone?
Do you have the T version of the phone or just the standard.
What ROM are you talking about 'bening your first'?
How did you install it?
What file did you try and Odin?
It is recommended you read, read some more, search and then read some more to keep just such things from happening.
Just a wild guess but you tried to Odin a .tar to a version 'previous' to the version you started with.
OR you tried to Odin a .tar for the wrong model - tried a non T .tar on a T model or vice-versa
Search for the FULL NAE .tar if you are on the 'standard' model and Odin that one.
Or, if on the T variant, hit up those threads, find the lates .tar and Odin that.
@aprilx
So great to see you posting back after asking for help.
So cool when people contribute to what worked and didn't so that others can be helped and help to contribute to the community at large.....
Oh, wait you didn't.
Guess all is good.
smmmeeesh.
Sorry, I worked 16 hours yesterday, so checking the forums was the last thing on my mind considering I got up at 5am and got home at 9:30pm.
I figured out what it was, after trying a million different things. I found a MJA stock firmware and I was able to flash that, and now I finally have Kitkat on my device.
Hello all!
First of all i want to thank this site (and the people behind it) that makes everything android possible.
I feel privileged to be a member of this forum specially on rough times like what i am facing right now.
I rooted my Galaxy A8-A800i the other day and everything went great. I followed the instructions that i found here. Unfortunately, yesterday i turned off the OEM Unlock on my phone. Now, as the thread title says it. it is stuck on the Logo Screen with the annoying " Custom Binary blocked by FRP Lock ". i read a guide that ashyx made and i felt stupid. I didn't know that turning the OEM Unlock will do that to my Phone.
Right now, I am digging deep on this forums to try and revive my phone that is currently in Brick state.
i am downloading a firmware from sammobile for my phone, the problem i have is... i don't know how to use it. I don't know much about my phone but I do want to learn a lot and i know that this is the right place. I would like to ask assistance on how to use the firmware that I am downloading right now, and also, can i make the Knox Counter go "0" again?
Thanks for everything guys. I highly appreciate everything i've learned here so far.
rissered said:
Hello all!
First of all i want to thank this site (and the people behind it) that makes everything android possible.
I feel privileged to be a member of this forum specially on rough times like what i am facing right now.
I rooted my Galaxy A8-A800i the other day and everything went great. I followed the instructions that i found here. Unfortunately, yesterday i turned off the OEM Unlock on my phone. Now, as the thread title says it. it is stuck on the Logo Screen with the annoying " Custom Binary blocked by FRP Lock ". i read a guide that ashyx made and i felt stupid. I didn't know that turning the OEM Unlock will do that to my Phone.
Right now, I am digging deep on this forums to try and revive my phone that is currently in Brick state.
i am downloading a firmware from sammobile for my phone, the problem i have is... i don't know how to use it. I don't know much about my phone but I do want to learn a lot and i know that this is the right place. I would like to ask assistance on how to use the firmware that I am downloading right now, and also, can i make the Knox Counter go "0" again?
Thanks for everything guys. I highly appreciate everything i've learned here so far.
Click to expand...
Click to collapse
you can try flashing the official firmware I hope it fixes your phone.
and knox cannot be reset to 0
nepalbiraj said:
you can try flashing the official firmware I hope it fixes your phone.
and knox cannot be reset to 0
Click to expand...
Click to collapse
Thank you!... i downloaded the stock firmware from sammobile. but whenever i extract it there's a rar message saying it is corrupted so i DLed a new one, it has the same result. I haven't tried using it to fix my phone but i will try right now. Ill give an update on how it goes.
Tried flashing the new firmware but Odin can't detect my phone. i have the latest Driver for SAMSUNG and i have the latest Odin. I tried restarting my phone and my computer several times but it still fails. i am really frustrated and our of options right now. Even if Odin detects my phone there's no guarantee that the stock firmware will be installed properly since it always shows corrupt when i extract it from zip
rissered said:
Tried flashing the new firmware but Odin can't detect my phone. i have the latest Driver for SAMSUNG and i have the latest Odin. I tried restarting my phone and my computer several times but it still fails. i am really frustrated and our of options right now. Even if Odin detects my phone there's no guarantee that the stock firmware will be installed properly since it always shows corrupt when i extract it from zip
Click to expand...
Click to collapse
Install the Samsung drivers first, reboot your pc.
Start odin in Admin mode then put your device in download mode, plug in the usb cable. Your device should be detected.
Don't try flashing a corrupt firmware, it will be rejected anyway as it will fail the md5 check.
I suggest you use a different browser to download.
@ashyx hey! thanks for all your help. my internet went offline while i was trying to respond to the other thread. my phone is now fixed with your help. Thank you so much! only took 3 mins for the while Odin flashing to complete
This issue is now FIXED
rissered said:
This issue is now FIXED
Click to expand...
Click to collapse
but how? I have installed official firmware and flashed via odin and it shows"success", but then it gets stuck in the samsung logo. please help
Hello everybody, seriously i think I broke my phone but i did it to learn a bit, basically what happened, I installed TWRP Recovery and routed my phone everything gone well. after i have seen a guy talking about ROMs And stuff. I go Samsung Galaxy s7 edge SM-G935F Exynos. I tried to install The ROm via TRWP like everyone do, i followed all steps. on this thread :
http://forum.xda-developers.com/s7-edge/development/rom-bobcatrom-mm-6-0-1-t3404008
I installd this ROM : [ROM][SM-G935/930F]{~BoBCaTROM~}[v.1.0.4][APF2] ~MM 6.0.1~
after the phone stuck booting up and booting up again stuck on samsung logo and then turn off and boot up again, wont finish. after i tried to do the installation again. ive done it 4 times. but still stuck on booting. it made me crazy i thought if i wipe everything gonna work, i made it worse i wiped everything lol even the back up, and the ROM. Im newbie, so maybe i will learn from that. could someone tell me, if i can make the phone like it was ? and how about the efs is it important, how can get it back ? and can i install other ROMs, or thats it im stuck on the original Firmware. thank you.
kingshine2017 said:
Hello everybody, seriously i think I broke my phone but i did it to learn a bit, basically what happened, I installed TWRP Recovery and routed my phone everything gone well. after i have seen a guy talking about ROMs And stuff. I go Samsung Galaxy s7 edge SM-G935F Exynos. I tried to install The ROm via TRWP like everyone do, i followed all steps. on this thread :
http://forum.xda-developers.com/s7-edge/development/rom-bobcatrom-mm-6-0-1-t3404008
I installd this ROM : [ROM][SM-G935/930F]{~BoBCaTROM~}[v.1.0.4][APF2] ~MM 6.0.1~
after the phone stuck booting up and booting up again stuck on samsung logo and then turn off and boot up again, wont finish. after i tried to do the installation again. ive done it 4 times. but still stuck on booting. it made me crazy i thought if i wipe everything gonna work, i made it worse i wiped everything lol even the back up, and the ROM. Im newbie, so maybe i will learn from that. could someone tell me, if i can make the phone like it was ? and how about the efs is it important, how can get it back ? and can i install other ROMs, or thats it im stuck on the original Firmware. thank you.
Click to expand...
Click to collapse
Just use Odin to flash a stock rom.
Install stock via Odin and try again.
If at first you do not succeeded, try and try again.
Out of interest, When you installed the ROM, how long did you wait before restarting the device.
(How long did you leave it on the Samsung Startup logo)
I know Stock modded ROMS when first install can sometimes take upto 10 - 15 minutes to Boot for the first time.
(I remember waiting 20 minutes one time on my note 3)
Delete
Thank you
My phone come back to normal thank you very much guys
The way to fix this is pretty straight forward and there are many tutorials online on how to do this.
You will need your stock rom (can be acquired from SamMobile) and Odin (i recommend using 3.0.7) and then plugging your device in to your windows computer (does not work on any other os) and reflashing back to your stock rom. This will 100% work and you should just go to YouTube and search for "How to reflash stock Galaxy S7" after downloading your stock rom.
Joshpace92 said:
The way to fix this is pretty straight forward and there are many tutorials online on how to do this.
You will need your stock rom (can be acquired from SamMobile) and Odin (i recommend using 3.0.7) and then plugging your device in to your windows computer (does not work on any other os) and reflashing back to your stock rom. This will 100% work and you should just go to YouTube and search for "How to reflash stock Galaxy S7" after downloading your stock rom.
Click to expand...
Click to collapse
i have a question, how do i know what firmware to get
i mean there are a lot of them from different countries and different pda csc numbers
do i have to choose one that matches my base band or something like that?
jcpineda said:
i have a question, how do i know what firmware to get
i mean there are a lot of them from different countries and different pda csc numbers
do i have to choose one that matches my base band or something like that?
Click to expand...
Click to collapse
You must choose the firmware that is correct for your model for example if I had a Galaxy S7 and the model number for it is SM-G9358 i'd then choose the one that says its for the SM-G9358 as well as my carrier for example Optus if there is no correct carrier version then just choose one that is from your country it wont make a huge difference you'll be fine.
If you do not know how to find the model number for your phone it should be somewhere in Settings>About or when you are booting on your device.
Let me know if you need any further assistance.