[Q] Multiple issues with DVP. Any Help? - Venue Pro General

Off late I have been facing multiple issues with the DVP. For info I have the TMO DVP - unlocked and updated it up to 7.8 using the cabsender.
The issues have been present even before for some time and I had imagined they would be fixed after upgrade but no luck. Any help is highly appreciated.
1. When ever I call someone or receive a call the screen keeps on flickering - even if I want to disconnect a call I am not able to end the call as the screen keeps on flickering. Only if the other person disconnects the call can I then use the phone. I cleaned the front sensor etc but no luck. Is there anyway or if anyone else faced a similar issue and can be rectified somehow by changing proximity / sensor settings?
2. Once a call is complete I cannot make another call immediately. I have to wait for anywhere from 2-5 minutes to make another call or switch off and switch on the phone to be able to call again.
3. USSD commands like to know info etc using *AAA# etc work only after I switch off and switch on the phone and for the first time. After I use the phone for any other function the USSD command wont work.
Any help? Thanks

Sorry to be bumping the thread, but any help is highly appreciated regarding the above issues.

Related

Some oddities...

Hi there,
I have a few small questions...
I was trying to help someone the other day with this problem on their HTC Touch HD, but I had the same problem also.
When setting the End Key to lock the handset, its not actually locking it.
Any ideas? The end key works to disconnect open connections, but not to lock?
Also, when someone phones me, with a custom ringtone set on my Phone, it rings once, then doesn't continue ringing, just stops but the person calling remains calling.
Can this be fixed in anyway?
Thank you,

Pushing buttons in call problem

Hi, every time i call somebody or they call me my face touches the screen and either hangs up the call or activates speakerphone. I was wondering if maybe the sensors aren't working correctly or if there is a way to enable them.
thanks in advance zac
really need to sort this out as its my only problem with the leo.

Need help with a couple of issues

Hi Guys,
I have a couple of problems with the HD2 that i cant seem to find the answer too using the thread search.
Firstly the phone lock. When i get into my car the bluetooth pairs with the phone ready for use. If i try to make a out going call using the buttons in the steering wheel the call fails because the phone is in a locked state. To make a call i have to slide the lock off and enter my pin. Surely the phone should allow the call without the need to fiddle around with the phone while driving? Anyone know a fix?
The second issue is also due to the phone lock. Some times after missing a call the lock come off and the screen is active. In this state ive made calls in my pocket and dont even know it. Again any ideas to solve the issue?
Many Thanks

HD2 Dropping calls

Hi guys, this is my first post - very exciting.
I've had the HD2 for 3 weeks now and I love it. The only issue I have is with it dropping calls. I don't think it handles the handover from cell to cell very well but that's not my main issue as it happened from time to time on other phones too. My main query is with the clever accelerometer related functions. According to the manual, during a call if you put it face down it activates the speaker. Mine just ends the call. I think that it is getting confused during calls if I move and cutting me off. Done two hard resets but no joy. Does anyone know how to disable the function either through settings or registry?
I've looked around for quite a while on the forum and can't find what I'm looking for. Can anyone point me in the right direction?
Cheers
Dan
PS It has stock O2 ROM, BSB tweaks, etc
Danno320 said:
Hi guys, this is my first post - very exciting.
I've had the HD2 for 3 weeks now and I love it. The only issue I have is with it dropping calls. I don't think it handles the handover from cell to cell very well but that's not my main issue as it happened from time to time on other phones too. My main query is with the clever accelerometer related functions. According to the manual, during a call if you put it face down it activates the speaker. Mine just ends the call. I think that it is getting confused during calls if I move and cutting me off. Done two hard resets but no joy. Does anyone know how to disable the function either through settings or registry?
I've looked around for quite a while on the forum and can't find what I'm looking for. Can anyone point me in the right direction?
Cheers
Dan
PS It has stock O2 ROM, BSB tweaks, etc
Click to expand...
Click to collapse
In terms of dropping calls, it is usually due to the handover sequence between cellsites, rather than the handset itself.
I'm guessing you are on O2? If so, PM me your location and I'll get my "inside contact" to take a look at any outstanding issues there.
I must admit, I've not used that accelerometer feature yet, but I have turned it on. (Under Settings -> Sound & Display -> Ring and Notifications)
Erm.. This might sound like a dumb post but I was having problems with call disconnection whilst in the middle of calls. I discovered the problem - I'm LEFT HANDED!
When I used the device I held it in my right hand and type/operate with my left. When I held the phone to my right ear to have a conversation I was occasionaly touching my cheek with the call-end button and that's how I was getting repeated disconnections - true story.
I am now a practicing ambidextarian...
Thanks for getting back so quickly guys
a practicing ambidextarian eh............ I wish I could breathe underwater! (sorry I couldn't resist it)
I don't think I'm cutting off the call through contact with the screen all the time though but yes I have done it more than once!
Thanks for the info rp-x1. I'm in Settings -> Sound & Display -> Ring and Notifications and the only thing that looks relevant is the 'Quiet ring on pickup' option and I'm not sure it's related. For instance, I got a call early yesterday morning and answered the call in bed. When the wife elbowed me and I turned on my side the phone assumed I was putting it face down and ended the call. I'm looking to disable this function.
Dropping Phone calls even in locked screen state
I am also dropping a alot of calls . Not sure if it is related to face down as the phone is always upright after answring a call. May be the call end button.
Having said that the phone was locked when I received a call today. I moved the slider to answer said "hello", then after 3 seconds it disconnected.
Any ideas?
Thanks
edit: Seems like a proxomity sensor issue, judging by other threads. Will continue to search for a fix/workaround.
htc hd2 dropping calls
Hi everyone,
I have a htc hd2 since 1/2011, love the phone BUT i HATE the dropping calls problem!! Please help. also will upgrade to windows 7 help with this problem.
I hardly use the phone to make calls, so I'm not sure if the calls dropping in the past is any relation, but as stated by Danno320, according to the manual ( i went back looking for this ), turning the phone face-down will activate speakerphone.
This is so exciting... so I tried it a few times.
All it did was to disconnect the calls.
I wonder if the action really does turn the speakerphone on.
Anyone who's tried and succeeded?
I also want to know if there's a solution to this now that I know my phone isn't functioning like what the manual said it should be...

Can't pick up calls lately

Hi
I'm not sure why I'm experiencing this lately but I use my LG G2 phone normally (surfing and listening to music...etc) but whenever I get a call and I try to swipe to pick the call, I found no response at all. As if I'm NOT doing any swipe at all and I end up missing the call. This happened many times losing calls for just not having a non-working touch screen whenever I get a call. This is driving me mad and I feel like I went totally wrong getting an LG instead of any other famous brand name like Samsung or HTC.
Any ideas are very well appreciated as I'm not quite ready financially to dump this phone yet!
magoooood said:
Hi
I'm not sure why I'm experiencing this lately but I use my LG G2 phone normally (surfing and listening to music...etc) but whenever I get a call and I try to swipe to pick the call, I found no response at all. As if I'm NOT doing any swipe at all and I end up missing the call. This happened many times losing calls for just not having a non-working touch screen whenever I get a call. This is driving me mad and I feel like I went totally wrong getting an LG instead of any other famous brand name like Samsung or HTC.
Any ideas are very well appreciated as I'm not quite ready financially to dump this phone yet!
Click to expand...
Click to collapse
This might be a stupid question, but do you have this problem when you are already using the phone? When you are using the phone already you don't swipe the screen, but you just press the answer button.
Lately I have the same problem. The phone and the touch screen is working correctly in every other situation.
The problem is only when I try to pickup the phone after around the 2nd ringtone. At that point the screen freeze. The buttons are still working, I can turn the screen on / off with the power button and mute the ringtone with the volume.
Anyone had resolved this issue?

Categories

Resources