Related
After installing MDL custom kernel and rooting I now have a persistent notification "Detection Information - The device has detected an application attempting unpermitted actions. To protect your device, it is recommended you reboot". Rebooting doesn't stop the notification from reappearing after about 5-10mins. I have tried clearing cache via custom recovery but doesnt help. Any ideas?
Thanks!
Use titanium backup or similar app to "freeze" seandroid.apk and reboot. Nag notification should be gone.
troyboytn said:
Use titanium backup or similar app to "freeze" seandroid.apk and reboot. Nag notification should be gone.
Click to expand...
Click to collapse
Thanks, can this be removed using a Root File Explorer? Also is there another free app I can download/use to freeze?
Dont remove it....not sure of negative implications of removal. Free version of System Tuner will let you freeze it I believe.
thettaccns
troyboytn said:
Dont remove it....not sure of negative implications of removal. Free version of System Tuner will let you freeze it I believe.
Click to expand...
Click to collapse
Thanks I was wondering what to do here...:good:
---------- Post added at 08:45 PM ---------- Previous post was at 08:09 PM ----------
Actually found this... No credit goes to me I'm just passing the info along...
How to disable ANNOYING messages "DETECTION Information":
Using TITANIUM BACKUP and FREEZING app called SEAndroid.apk DOESN'T WORK PROPERLY!!
DO NOT USE IT, YOUR SYSTEM WILL GO BACK TO CUSTOM AFTER SOME TIME!!! NOT RECOMMENDED!!!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Use File Manager with root explorer instead and mount SYSTEM as WRITABLE.
2. Go to: /data/data/ look for com.sec.knox.seandroid and rename it to 000.knox.seandroid or whathever you wish.. Same thing applies to com.sec.knox.store
3. Go to: /system/app/ and DELETE: KNOXAgent.apk, KNOXAgent.odex, KNOXStore.apk, KNOXStore.odex
updated:
After few hours of testing (MDL), and all updates there was NO messages at all!!
!!!SOLVED!!!
troyboytn said:
Dont remove it....not sure of negative implications of removal. Free version of System Tuner will let you freeze it I believe.
Click to expand...
Click to collapse
I actually have removed them completely and the message is gone. I have not seen it since. I have rebooted several times and even flashed the blue ICS Statusbar and blue center clock mod after that. No issues at all. I deleted both SEAndroid and that SamsungKNOX or whatever that was called. I deleted them through Rom Toolbox Pro (Amazing app well worth it the price)
Sent from my SPH-L720 using xda premium
Used this method and it worked just fine.
Followed the instruction in Post #5 and it works like a Charm
satanazh said:
Followed the instruction in Post #5 and it works like a Charm
Click to expand...
Click to collapse
Me too.
Excellent!
does it work without knox?
chicagoaan said:
Thanks I was wondering what to do here...:good:
---------- Post added at 08:45 PM ---------- Previous post was at 08:09 PM ----------
Actually found this... No credit goes to me I'm just passing the info along...
How to disable ANNOYING messages "DETECTION Information":
Using TITANIUM BACKUP and FREEZING app called SEAndroid.apk DOESN'T WORK PROPERLY!!
DO NOT USE IT, YOUR SYSTEM WILL GO BACK TO CUSTOM AFTER SOME TIME!!! NOT RECOMMENDED!!!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Use File Manager with root explorer instead and mount SYSTEM as WRITABLE.
2. Go to: /data/data/ look for com.sec.knox.seandroid and rename it to 000.knox.seandroid or whathever you wish.. Same thing applies to com.sec.knox.store
3. Go to: /system/app/ and DELETE: KNOXAgent.apk, KNOXAgent.odex, KNOXStore.apk, KNOXStore.odex
updated:
After few hours of testing (MDL), and all updates there was NO messages at all!!
!!!SOLVED!!!
Click to expand...
Click to collapse
I don't have KnOx yet. I reflashed back to MDC and pushed the stock kernel and CWM, and was ok until I installed SU... SU seems to be what is detected but I didn't have any issues until MF9 came out and kept overheating my phone, downloading all the time and failing because I had root and wifihack.
Kingmdm said:
After installing MDL custom kernel and rooting I now have a persistent notification "Detection Information - The device has detected an application attempting unpermitted actions. To protect your device, it is recommended you reboot". Rebooting doesn't stop the notification from reappearing after about 5-10mins. I have tried clearing cache via custom recovery but doesnt help. Any ideas?
Thanks!
Click to expand...
Click to collapse
I believe this happens because your not fully MDL and you have two different versions running at the same time. For example MDC with MF9 or MDL with MF9 or MDC with MDL. To actually remove it you need to upgrade fully to the version you want not mixed.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
I believe this happens because your not fully MDL and you have two different versions running at the same time. For example MDC with MF9 or MDL with MF9 or MDC with MDL. To actually remove it you need to upgrade fully to the version you want not mixed.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
This is the answer.... follow this post:
http://forum.xda-developers.com/showpost.php?p=43418277
I made the same error and did follow the full instructions to install stock rooted rom
chicagoaan said:
Thanks I was wondering what to do here...:good:
---------- Post added at 08:45 PM ---------- Previous post was at 08:09 PM ----------
Actually found this... No credit goes to me I'm just passing the info along...
How to disable ANNOYING messages "DETECTION Information":
Using TITANIUM BACKUP and FREEZING app called SEAndroid.apk DOESN'T WORK PROPERLY!!
DO NOT USE IT, YOUR SYSTEM WILL GO BACK TO CUSTOM AFTER SOME TIME!!! NOT RECOMMENDED!!!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Use File Manager with root explorer instead and mount SYSTEM as WRITABLE.
2. Go to: /data/data/ look for com.sec.knox.seandroid and rename it to 000.knox.seandroid or whathever you wish.. Same thing applies to com.sec.knox.store
3. Go to: /system/app/ and DELETE: KNOXAgent.apk, KNOXAgent.odex, KNOXStore.apk, KNOXStore.odex
updated:
After few hours of testing (MDL), and all updates there was NO messages at all!!
!!!SOLVED!!!
Click to expand...
Click to collapse
Thank you so much
chicagoaan said:
Thanks I was wondering what to do here...:good:
---------- Post added at 08:45 PM ---------- Previous post was at 08:09 PM ----------
Actually found this... No credit goes to me I'm just passing the info along...
How to disable ANNOYING messages "DETECTION Information":
Using TITANIUM BACKUP and FREEZING app called SEAndroid.apk DOESN'T WORK PROPERLY!!
DO NOT USE IT, YOUR SYSTEM WILL GO BACK TO CUSTOM AFTER SOME TIME!!! NOT RECOMMENDED!!!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Use File Manager with root explorer instead and mount SYSTEM as WRITABLE.
2. Go to: /data/data/ look for com.sec.knox.seandroid and rename it to 000.knox.seandroid or whathever you wish.. Same thing applies to com.sec.knox.store
3. Go to: /system/app/ and DELETE: KNOXAgent.apk, KNOXAgent.odex, KNOXStore.apk, KNOXStore.odex
updated:
After few hours of testing (MDL), and all updates there was NO messages at all!!
!!!SOLVED!!!
Click to expand...
Click to collapse
Could you please tell me how to mount the system as writable. Thanks
chicagoaan said:
Thanks I was wondering what to do here...:good:
---------- Post added at 08:45 PM ---------- Previous post was at 08:09 PM ----------
Actually found this... No credit goes to me I'm just passing the info along...
How to disable ANNOYING messages "DETECTION Information":
Using TITANIUM BACKUP and FREEZING app called SEAndroid.apk DOESN'T WORK PROPERLY!!
DO NOT USE IT, YOUR SYSTEM WILL GO BACK TO CUSTOM AFTER SOME TIME!!! NOT RECOMMENDED!!!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Use File Manager with root explorer instead and mount SYSTEM as WRITABLE.
2. Go to: /data/data/ look for com.sec.knox.seandroid and rename it to 000.knox.seandroid or whathever you wish.. Same thing applies to com.sec.knox.store
3. Go to: /system/app/ and DELETE: KNOXAgent.apk, KNOXAgent.odex, KNOXStore.apk, KNOXStore.odex
updated:
After few hours of testing (MDL), and all updates there was NO messages at all!!
!!!SOLVED!!!
Click to expand...
Click to collapse
I'm having issues with this constant error message, looked to find the above files and I have nothing. To search for the above file, I used Root Explorer. I'm using the FreeGS4 ROM and use Team Win Recovery. Would using a different ROM fix the issue? Any help getting this annoying message to go away would be appreciated. Everything works fine, it's this constant nagging of a message.
I understand now that logcat requires root for Android 4.1+ is that right?
I would like some way to debug my app on someone's phone remotely, in the past I have got them to install alogcat and send me the output, but since I've upgraded to 4.1 I've never got it to work.
Whats the best technique to obtain syslog logcat data when my app fails, the data which I see on the play store isn't enough detail for me to resolve or identify the problem.
1 user is getting this error:
Caused by: java.lang.NoClassDefFoundError: com.google.android.maps.GeoPoint
Click to expand...
Click to collapse
as far as I know no-one else is seeing this issue,
They have google maps installed but I don't know what else to check other that get access to the logcat from there phone.
thanks
They can still download the Android SDK and then type
Code:
adb shell
logcat
I was hoping an easier method would be available.
you can ask them to mail you dumpstate_app_error.txt.gz from /data/log/ .I think astro can copy that to sdcard.Or else you could run
Code:
pull /data/log/dumpstate_app_error.txt.gz /sdcard
from any terminal app to copy that to sdcard.
vijai2011 said:
you can ask them to mail you dumpstate_app_error.txt.gz from /data/log/ .I think astro can copy that to sdcard.Or else you could run
Code:
pull /data/log/dumpstate_app_error.txt.gz /sdcard
from any terminal app to copy that to sdcard.
Click to expand...
Click to collapse
Isn't root required for that?
nikwen said:
Isn't root required for that?
Click to expand...
Click to collapse
Nope...data is mounted as RW by default and more over you need root only to write to a partition mounted as R(users should also be considered).You can even copy system files with astro without root. But Its been so long since I did that and don't know how it has changed with 4.1 and 4.2.But no harm in trying
vijai2011 said:
Nope...data is mounted as RW by default and more over you need root only to write to a partition mounted as R(users should also be considered).You can even copy system files with astro without root. But Its been so long since I did that and don't know how it has changed with 4.1 and 4.2.But no harm in trying
Click to expand...
Click to collapse
In 4.x you need root to access the logs from an app so I do not think that this is possible.
On 2.3 when my phone was not rooted I was not able to access /data at all.
nikwen said:
In 4.x you need root to access the logs from an app so I do not think that this is possible.
On 2.3 when my phone was not rooted I was not able to access /data at all.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.delta.Info .This app targets 4.0-4.2 and it mails the same file without root.So it will work.
vijai2011 said:
https://play.google.com/store/apps/details?id=com.delta.Info .This app targets 4.0-4.2 and it mails the same file without root.So it will work.
Click to expand...
Click to collapse
The description says that it does only work with DeltaROM.
nikwen said:
The description says that it does only work with DeltaROM.
Click to expand...
Click to collapse
Of course it is...But the fact I wanted to say is, the app doesn't need root for that
vijai2011 said:
Of course it is...But the fact I wanted to say is, the app doesn't need root for that
Click to expand...
Click to collapse
It does need root. Well, every app can get logs the old way and they will get logs, but just those logs with the user id of the app. No more logs.
Just one more thing I could think of: Maybe the developer of the ROM changed that code in the Android sources of his ROM.
Or when the app is installed, the ROM automatically runs that command:
Code:
pm grant com.delta.Info android.permission.READ_LOGS
I will test it on my phone and tell you the result. If it does not work, it is a feature of the ROM.
nikwen said:
It does need root. Well, every app can get logs the old way and they will get logs, but just those logs with the user id of the app. No more logs.
Just one more thing I could think of: Maybe the developer of the ROM changed that code in the Android sources of his ROM.
Or when the app is installed, the ROM automatically runs that command:
Code:
pm grant com.delta.Info android.permission.READ_LOGS
I will test it on my phone and tell you the result. If it does not work, it is a feature of the ROM.
Click to expand...
Click to collapse
FYI I'm the dev of the app .And there is no root,no extra permissions,Rom is not modded (except for a file which needs for the app to work.But it doesnt have any relation with logs).
If you still have doubt,Just create an email indent with the log file in /data/log as an extra data in Async task and try
vijai2011 said:
FYI I'm the dev of the app .And there is no root,no extra permissions,Rom is not modded (except for a file which needs for the app to work.But it doesnt have any relation with logs).
If you still have doubt,Just create an email indent with the log file in /data/log as an extra data in Async task and try
Click to expand...
Click to collapse
Ok. I did not see that.
I will try that.
---------- Post added at 03:03 PM ---------- Previous post was at 02:44 PM ----------
nikwen said:
Ok. I did not see that.
I will try that.
Click to expand...
Click to collapse
For me it said "Could not send attachment."
My code:
Code:
Intent mailIntent = new Intent(android.content.Intent.ACTION_SENDTO);
mailIntent.setType("text/plain");
mailIntent.setData(Uri.parse("mailto:[email protected]"));
mailIntent.putExtra(android.content.Intent.EXTRA_SUBJECT, "test");
mailIntent.putExtra(android.content.Intent.EXTRA_TEXT, "hi");
mailIntent.putExtra(Intent.EXTRA_STREAM, Uri.fromFile(new File("/data/log/dumpstate_app_error.txt.gz")));
mailIntent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK | Intent.FLAG_ACTIVITY_EXCLUDE_FROM_RECENTS);
startActivity(Intent.createChooser(mailIntent, "Send via"));
(Of course, I changed the mail address.)
nikwen said:
Ok. I did not see that.
I will try that.
---------- Post added at 03:03 PM ---------- Previous post was at 02:44 PM ----------
For me it said "Could not send attachment."
My code:
Code:
Intent mailIntent = new Intent(android.content.Intent.ACTION_SENDTO);
mailIntent.setType("text/plain");
mailIntent.setData(Uri.parse("mailto:[email protected]"));
mailIntent.putExtra(android.content.Intent.EXTRA_SUBJECT, "test");
mailIntent.putExtra(android.content.Intent.EXTRA_TEXT, "hi");
mailIntent.putExtra(Intent.EXTRA_STREAM, Uri.fromFile(new File("/data/log/dumpstate_app_error.txt.gz")));
mailIntent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK | Intent.FLAG_ACTIVITY_EXCLUDE_FROM_RECENTS);
startActivity(Intent.createChooser(mailIntent, "Send via"));
(Of course, I changed the mail address.)
Click to expand...
Click to collapse
Seriously?I just now tried on my sony xperia miro running 4.0.4 and it works just flawlessly...But I didnt use email indent...I use a external mail api...(Doesnt make difference if its blocked in core android I suppose)
vijai2011 said:
Seriously?I just now tried on my sony xperia miro running 4.0.4 and it works just flawlessly...But I didnt use email indent...I use a external mail api...(Doesnt make difference if its blocked in core android I suppose)
Click to expand...
Click to collapse
Yeah, seriously.
Ah. You run it on 4.0.4. They removed it in JellyBean.
Check this: https://groups.google.com/d/msg/android-developers/6U4A5irWang/AvZsrTdfICIJ
---------- Post added at 03:14 PM ---------- Previous post was at 03:11 PM ----------
@mtrax: Check the answer here: http://stackoverflow.com/questions/11499636/so-how-can-i-see-the-logs-in-jelly-bean
That's how to create reports and send them via email.
nikwen said:
Yeah, seriously.
Ah. You run it on 4.0.4. They removed it in JellyBean.
Check this: https://groups.google.com/d/msg/android-developers/6U4A5irWang/AvZsrTdfICIJ
---------- Post added at 03:14 PM ---------- Previous post was at 03:11 PM ----------
@mtrax: Check the answer here: http://stackoverflow.com/questions/11499636/so-how-can-i-see-the-logs-in-jelly-bean
That's how to create reports and send them via email.
Click to expand...
Click to collapse
Its min api is 4.0.4 and I even run it on 4.2.2 on my friends s3 and it works fine .Think I should make the class open source
vijai2011 said:
Its min api is 4.0.4 and I even run it on 4.2.2 on my friends s3 and it works fine .Think I should make the class open source
Click to expand...
Click to collapse
Interesting. I will test it if you opensource it.
nikwen said:
Interesting. I will test it if you opensource it.
Click to expand...
Click to collapse
Will do that part alone soon
Sent from my GT-N7000 using xda app-developers app
I tried this from my rooted SG2
ie
pull /data/log/dumpstate_app_error.txt.gz /sdcard
and I got pull command not found
mtrax said:
I tried this from my rooted SG2
ie
pull /data/log/dumpstate_app_error.txt.gz /sdcard
and I got pull command not found
Click to expand...
Click to collapse
If you do in computer, it will be
Code:
adb pull /data/log/dumpstate_app_error.txt.gz /sdcard
Sent from my GT-N7000 using xda app-developers app
I want to access data/media and data/data folder on my girlfriend's phone to see something but she is not rooted and does not want to root. Is there a workaround for this or no?
From what I recall you can use root explorer to access and read the system without root. You just can't change anything.
Sent from my Galaxy S4
crawrj said:
From what I recall you can use root explorer to access and read the system without root. You just can't change anything.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Thank you.
crawrj said:
From what I recall you can use root explorer to access and read the system without root. You just can't change anything.
Sent from my Galaxy S4
Click to expand...
Click to collapse
yep..you can access it via root explorer, but just can't change anything since you can't switch to R/W from R/O without root
---------- Post added at 07:45 PM ---------- Previous post was at 07:45 PM ----------
Joe0113 said:
Thank you.
Click to expand...
Click to collapse
just hit the thanks button instead
Hi!
I've a rollback file on my Kindle currently waiting for downgrading.
The file just popped in and waiting that I'll charge my kindle.
Is there anything I can do for the community to support with information and/or files?
I am on stock 4.5.2 with, of course, no root.
Cheers
URBANsUNITED
Well I will be first to thanks for offering to help mate as not much happening with a root at the moment so well done for coming forward ...
URBANsUNITED said:
Hi!
I've a rollback file on my Kindle currently waiting for downgrading.
The file just popped in and waiting that I'll charge my kindle.
Is there anything I can do for the community to support with information and/or files?
I am on stock 4.5.2 with, of course, no root.
Cheers
URBANsUNITED
Click to expand...
Click to collapse
With out root .no not at this point that I know of
jimyv said:
With out root .no not at this point that I know of
Click to expand...
Click to collapse
OK
I've downgrade my device now.
URBANsUNITED
URBANsUNITED said:
OK
I've downgrade my device now.
URBANsUNITED
Click to expand...
Click to collapse
let me knowif you get down graded, root
Safestrapped ..and want to try something safe to get that file
jimyv said:
let me knowif you get down graded, root
Safestrapped ..and want to try something safe to get that file
Click to expand...
Click to collapse
Pretty sure the file gets deleted right after.
I believe too as my download dir is empty now...
I am on 3.2.7 rooted now if you still want to try...
URBANsUNITED said:
I believe too as my download dir is empty now...
I am on 3.2.7 rooted now if you still want to try...
Click to expand...
Click to collapse
install safestrap
newest version and install recovery
you saw something in your downloads directly? Before your downgrade?
safestrap 3.75 installed
yep, I also had some ROMS located. Downloads dir wasn't empty before
URBANsUNITED said:
I believe too as my download dir is empty now...
I am on 3.2.7 rooted now if you still want to try...
Click to expand...
Click to collapse
Check /cache with a root file explorer, but I doubt it's still there.
EncryptedCurse said:
Check /cache with a root file explorer, but I doubt it's still there.
Click to expand...
Click to collapse
no it will be gone from there once used it deletes it
Enter Recovery and do a backup of your stock lot
next build a ROM slot any will do
restore backup to ROM slot
download a copy of ROM Toolbox lite And install on running rom slot
Nope... gone
see the attched zip
jimyv said:
no it will be gone from there once used it deletes it
Enter Recovery and do a backup of your stock lot
next build a ROM slot any will do
restore backup to ROM slot
download a copy of ROM Toolbox lite And install on running rom slot
Click to expand...
Click to collapse
Ok, installed. Whats next?
URBANsUNITED said:
Ok, installed. Whats next?
Click to expand...
Click to collapse
so currently you are running on a ROM slot not your stock slot and you have rOM Toolbox installed correct?
---------- Post added at 02:50 PM ---------- Previous post was at 02:48 PM ----------
download this file https://mega.co.nz/#!wlQl2bZD!Kk-rcWtcMPWxoEH5VcHrtZb7nOsJet9si1pm5FYhT44
jimyv said:
so currently you are running on a ROM slot not your stock slot and you have rOM Toolbox installed correct?
Click to expand...
Click to collapse
Correct! I can read and(!) follow
open rOM Toolbox,scroll right to build.prop Editer and open
Scroll left and create backup
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
now open root explorer or file explorer
go to SD card rOM Toolbox build.prop backup file and insert the file that you downloaded
---------- Post added at 03:02 PM ---------- Previous post was at 02:57 PM ----------
now go back to backup and restore in rOM Toolbox for build.prop and restore the file that you downloaded here's where it gets hairy
whatever you do do not let it try to install whatever it downloads if you keep touching and using the tablet it will not attempt it on its own it must be at idle.after you reboot go to settings and check version number it should have the new build.prop file and check for updates. I'm hoping it will attempt to redownload the downgrade file to cashe then you must immediately remove it from device and delete that ROM slot.
it may not even like the swap and not even boot in that case that's why we had safestrap installed. It will not work just delete the slot and move on with life
Ok! Did that, installed the downloaded file and did a reboout.
System works, but no text is visible, only icons.
Next to ask for a update? But how as i can't read anything...
URBANsUNITED said:
Ok! Did that, installed the downloaded file and did a reboout.
System works, but no text is visible, only icons.
Next to ask for a update? But how as i can't read anything...
Click to expand...
Click to collapse
ok its not going to play nice. Simply reboot into safe strap and restore to slot 1 again and we can try something else
jimyv said:
ok its not going to play nice. Simply reboot into safe strap and restore to slot 1 again and we can try something else
Click to expand...
Click to collapse
Done! Back in business
now it doesn't really matter how you want to try to do it but what we need to do is edit your file to accommodate the newer version numbers
you can either go to those backup files and swap their and restore again or use the backup file for reference and do it line by line in the prop build editor
---------- Post added at 03:37 PM ---------- Previous post was at 03:28 PM ----------
ro.build.description
ro.build.fingerprint
ro.build.lab126.project not sure if this one is there for both ones
ro.build.version.fireos
ro.build.version.incremental
ro.build.version.name
ro.build.version.number
robuild.version.release
Save
Reboot
Would you tell me if I install a root required app as system app,will it work without root i.e. after unrooting or not? Thanks in advance :good:
Alan0101 said:
Would you tell me if I install a root required app as system app,will it work without root i.e. after unrooting or not? Thanks in advance :good:
Click to expand...
Click to collapse
No never bro either it is installed as system app or user app, if it requires root permission then it always requires root permission independent upon is it system app or an user app.
I have seen that system pannel app works fully when installed on nougat as system app but does not work fully when installed as user app it asks for adb or rooting to work fully.
Hmm, interesting. I think it might work. I am not rooted now. But try this.
- First, root your Droid flashing Magisk.
- Install LSpeed from Play Store.
- Install Titanium backup and from there turn LSpeed into system app.
- Then uninstall root by flashing this on Magisk
- Reboot and check if LSpeed is working.
I am curious about this as well! Thanks for asking!
---------- Post added at 23:32 ---------- Previous post was at 23:31 ----------
hackermssharma said:
No never bro either it is installed as system app or user app, if it requires root permission then it always requires root permission independent upon is it system app or an user app.
Click to expand...
Click to collapse
Question :- Don't the system apps have access to the ROOT directory of Android??
SuvamLP4549 said:
Hmm, interesting. I think it might work. I am not rooted now. But try this.
- First, root your Droid flashing Magisk.
- Install LSpeed from Play Store.
- Install Titanium backup and from there turn LSpeed into system app.
- Then uninstall root by flashing this on Magisk
- Reboot and check if LSpeed is working.
I am curious about this as well! Thanks for asking!
---------- Post added at 23:32 ---------- Previous post was at 23:31 ----------
Question :- Don't the system apps have access to the ROOT directory of Android??
Click to expand...
Click to collapse
U should try I am sure this will not work