Related
I think my phone is bricked
When I start up my phone it just stops when it says "ZTE"
Tried to reboot but wont work, its fully charged...
Please help
Are you rooted? Do you have ClockworkMod installed? What rom were you running?
NO
matt4321 said:
Are you rooted? Do you have ClockworkMod installed? What rom were you running?
Click to expand...
Click to collapse
No. No. and none.
I weren't running any roms or anything, but i have tried to root it with z4root and gingerbreak (etc..) a million times...
Your best bet mate is to get into fastboot (should be doable since you're getting to the splash screen), flash a custom recovery and then a custom rom, although this does void your warranty, I think its worth it though. What android version was your phone on before the problems started?
Sent from my Xoom using Tapatalk 2
if he installs stock rom and unroots then it should be fine and he will keep his warranty
Sent from my Blade using xda premium
Ehhh..
matt4321 said:
Your best bet mate is to get into fastboot (should be doable since you're getting to the splash screen), flash a custom recovery and then a custom rom, although this does void your warranty, I think its worth it though. What android version was your phone on before the problems started?
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
I dont quiet know how to do that
I was on 2.3.5 have 2gen stock rom
how do i get into fastboot then?
To get clockworkmod on, so you can flash your stock rom, which can be found here http://forum.xda-developers.com/showthread.php?t=1353526
Download fastboot and adb files, grab them either from the android website but through the sdk, or just Google adb and fastboot files and you'll be fine.
Then boot into fastboot by turning your phone on with the volume up button held down. It'll stay at the splash screen, connect to the PC and it should install drivers automatically.
Download the recovery image by googling clockworkmod zte blade. You want 5.0.2.0, it's the latest.
In the command prompt change directory to where your adb and fastboot files are. Then type 'fastboot flash recovery *nameofrecovery*.img'. Then 'fastboot reboot'. Power off the device after and boot into recovery by powering on with the volume down button held. Then flash your stock rom.
Hope this helps, i know it could be better but I'm at a BBQ so on my phone and can't link stuff easily, if you need more help, i can do it tonight. Others I'm sure will help too
Sent from my ZTE-BLADE using Tapatalk 2
matt4321 said:
To get clockworkmod on, so you can flash your stock rom, which can be found here http://forum.xda-developers.com/showthread.php?t=1353526
Download fastboot and adb files, grab them either from the android website but through the sdk, or just Google adb and fastboot files and you'll be fine.
Then boot into fastboot by turning your phone on with the volume up button held down. It'll stay at the splash screen, connect to the PC and it should install drivers automatically.
Download the recovery image by googling clockworkmod zte blade. You want 5.0.2.0, it's the latest.
In the command prompt change directory to where your adb and fastboot files are. Then type 'fastboot flash recovery *nameofrecovery*.img'. Then 'fastboot reboot'. Power off the device after and boot into recovery by powering on with the volume down button held. Then flash your stock rom.
Hope this helps, i know it could be better but I'm at a BBQ so on my phone and can't link stuff easily, if you need more help, i can do it tonight. Others I'm sure will help too
Sent from my ZTE-BLADE using Tapatalk 2
Click to expand...
Click to collapse
Still looks way to complicated for me :/
Do u know any videos that can show me how to do it?
hi is it bricked or what?
hi all xda members, im new on this forum and i really don know were to post or something like that, sorry, and i have searched on every singel page in google and on a lots of forums, and i dont find anything that can help me with my problem..:crying:
So now to my poroblem, i have a zte blade II 2.3.6 gen3 un-rooted, i tryed but no luck... and now i think its really bricked...because i cant boot it at all, not in FTM, not in bootloader mode, not in recovery, the only thing i can boot it in is DFU but i cant flash from there, it is bricked or can this be fixed easily? Thanx in advanced guys!
ZTE Blade does not respond at all
My ZTE Blade does not respond at all.
I have tried to install the official update from android 2.1 - 2.2 using this official application from ZTE
( ztedevices official site -> downloads -> Greece -> smartphone ->Blade)
It stopped in the middle of the process and after that I cannot use neither Power&volume(+) nor Power+volume(-) nor Power.
It looks completely dead.
Battery is fully charged,
When connected to charger, back button does not get red.
When connected to computer does not show android logo.
I have copied gen1 to gen 2 image folder to sd... nothing
gen2 to gen 1 the same.
I have also tried the AIO-BLADE application no respond to any action.
I have been searching this forum and the internet for 2 days now. No one answers cases whith hardbricked phones.
I think the phone is out of warranty.
PLZ it is my only smartphone and there is no money for a replacement, I am unemployed.
:crying:
Hi everyone,
I have a turkish phone with the model Avea in touch 3 large, which is a ZTE Q blade maxi.
I'm facing a problem when i get into the bootloader mode, the computer doesn't detect the phone at all.
Can't use the fastboot... whenever i run: <fastboot devices> i get absolutely nothing
when the phone is on i can run : adb devices , but not fastboot devices
i believe it has to do with the phone drivers...
i used padnet to install the phone driver = MT65xx
can anybody help ???
thanks a lot
Sir,
Please wait until mods will move this thread to the device specific forum (ZTE Blade) for more relevant answers.
Stand by
Good luck
Hello everyone.
I have a Blu Studio C HD s090q stuck on logo screen forever.
I have downloaded this room here http://www.mediafire.com/download/d9bdr1dbw4qk9ic/BLU_S090Q_V07_REPAIR.rar
and SP Flashtool v5.1428.00 and MTK USB drivers which I have installed and restarted computer after that.
Followed this tutorial here: http://www.blogtechtips.com/2015/03...phone-flash-tool-to-flash-any-blu-smartphone/
The thing is after I click "Download" button of SP flashtool and then connect my device (without battery as suggested on tutorial) and press vol up, nothing happens.
What should I do? Could somebody give me a little help? I have bought this phone just 3 weeks ago.
Thanks in advance.
Edit: I just figured out what was wrong after many and many tries and I would like to share in case somebody have a issue like mine.
First off, I had to download and installSP Flashtool ver 5.1628 and MKT USB Drivers and I also installed MT65xx Preloader Auto-Driver.
After I installed all these, I had to manually install "MediaTek DA USB VCOM (Android)" driver to my computer, then as I had bricked my phone by replacing KingRoot for SuperSU, while following previous tutorials, instead of choosing option "Format All + Download" (which wasn't working at all in my case), I picked the option called "Firmware update". Hit Download > while pressing vol + button, plugged usb cord / cable > SP Flashtool started downloading and I released vol+ button.
That's it! If somebody have any doubt, feel free to contact me.
Hello! I have exactly the problem you had your . My BLU C HD s090Q has been brick . I can not even enter the stock recovery . I can not do anything. And I followed the footsteps of your solution, but it still gives me trouble flashing . I'm desperate friend! Let's talk please , and help me to relive the cell .
Ramón Mejía said:
Hello! I have exactly the problem you had your . My BLU C HD s090Q has been brick . I can not even enter the stock recovery . I can not do anything. And I followed the footsteps of your solution, but it still gives me trouble flashing . I'm desperate friend! Let's talk please , and help me to relive the cell .
Click to expand...
Click to collapse
Did you installed MTK drivers?
In some cases you have to install it manually to your computer.
Try this tutorial here:
https://www.drivereasy.com/how-to-manually-install-a-driver-in-your-computer/
Best regards,
Cristy.
Hi friend! I have a doubt: How can I root this phone? I have the same model as you but I can't find any guide for root this device, and how to flash a custom recovery and a custom rom (like cyanogenmod 13 marshmallow) neither... Can you help me please? Thank you all.
Hi! I thing that is possible port this http://forum.xda-developers.com/hot-2/orig-development/official-twrp-infinix-hot-2-t3394989 For our device (is the same MTK) what do you thing?
same problem, stuck on blu logo, and i cant format the phone
I think is EMMC Problem!!!
luis.manresa14 said:
same problem, stuck on blu logo, and i cant format the phone
I think is EMMC Problem!!!
Click to expand...
Click to collapse
Don't format the phone. Try the FIRMWARE UPGRADE option!
I have a phone blu studio c hd that stopped working after I downloaded a new ROM and after the download finished the phone completely stopped and did not charge or read the charger plz help me
granado0 said:
I have a phone blu studio c hd that stopped working after I downloaded a new ROM and after the download finished the phone completely stopped and did not charge or read the charger plz help me
Click to expand...
Click to collapse
There are several different BLU Studio C HD models. What is the MODEL NUMBER of your device? And what is the specific complete name of the ROM that you flashed?
Sounds like you flashed the wrong ROM.
Sent from my Nexus 7 using XDA Free mobile app
What i do im download rom firmware stok rom
And what do I do the phone does not give any sign of life ROM that you downloaded is Ron Genuine but not from the company's site because the company's site does not contain any support for the phone
granado0 said:
And what do I do the phone does not give any sign of life ROM that you downloaded is Ron Genuine but not from the company's site because the company's site does not contain any support for the phone
Click to expand...
Click to collapse
You had a custom recovery on your phone? How exactly did you "download" the custom ROM to your device? You installed it from a zip using the custom recovery? Please explain.
Also what is the EXACT FILE NAME of the ROM you downloaded. Ron Genuine is not something I'm familiar with. Please answer the question I asked you. Without the exact file name, I cannot help you.
Sent from my 5056D using XDA Free mobile app
Hello Friend, I hope that even in these days I can respond. I have a problem with my Android ROM BLU Q S090Q / Android 6.0. I installed the ROM and everything perfect, I solved the Bricked of the phone using the MTK Droid Tools 2.5.3, the problem is that I could not rootearlo with any program (KingRoot, OneclicRoot, etc.) to be able to change the IMEI that I have it with another number and does not activate the Android's antenna. The Recovery of this Terminal is the original that brings the ROM that was installed, my question is: Will you install the TWRP you mention here and then load the SuperSU Binary 'to Rootearlo? What method can I use to robe my terminal? :silly:
I also read something on the Net about an Android ROM Nougat on BLU Studio G2 (Android 7.1.1 / CM14.1), is this true or is it a Fake?
Posd. I can not change the IMEI with the option "Engineer Mode" because in the terminal, the line inside the menu "CDS information" does not exist or is hidden, the other programs to activate it are NOT installed or blocked with an error message, I leave some captures to give you an idea.
"java.io.FileNotFoundExceptiion:/dev/pttycmd1: open failed: EACCES (Permission denied)/dev/pttycmd1: open failed: EACCES (Permission denied)"
NOT Root Imposible!: http://prntscr.com/gi9ez3
Captured ERROR: https://prntscr.com/gisw4u
No Line CDS informations: https://prntscr.com/gitbd8
Thk...
Hey Guys,
recently I tried to root my ZTE Axon 7 and install TWRP on it(A2017G)(Firmware B03).
It failed and i wanted to reinstall my bootloader and my recovery (i think that i wanted this)
Before i did that i backed up my boot and recovery is i´ve been told to.
I think something went wrong there, but i realised it too late.
When it was failed i didnt know how to reinstall the backuped boot and recovry files, so i thought i could rename them to boot and recovery and flash then with ADB. This failed either and now when i want to start my phone the screen that says ZTE pops up for a second and then goes black.
I know that was silly, but now my Phone is broken and i cant do anything with it, i can not start it, i can not boot in recovery, i can not boot to fastboot.
I tried to boot into Recovery Mode, but the same thing either...
The screen flashes and goes off.
I can´t do anything.
Also when i try to turn it on the LED on the top flashes red and green. I don´t know if its related to my problem, but i need help
PLEASE!!!
I don´t know what to do:crying::crying::crying::crying:
I've uploaded the A2017G B03 stock boot.img and recovery.img (both in the same zip file) to Mediafire, here's the link:
http://www.mediafire.com/file/lz2jco2np4innau/B03.zip
This happened once (well, more than once to be precise) to me too but there's a fix for it.
http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
What you want to do is follow all of the steps (using axon7root.exe) and use the boot.img and recovery.img provided by razorblader.
I don't think you will have a chance to bring it back to life. It looks like you are in DFU mode but need EDL mode for using tenfars tools.
Unfortunately for the G model you can't enter this mode with hw keys.
But I also have this issue and looking for a solution.
As of now only way is to send it in for repair...
I had the exact same problem and tried pretty much everything I could think off but as Deje63 mentioned the only way is to give it back to the seller and get a refund (if you still can) or send it in for repair.
Just today an Axon 7 owner in the german android-hilfe forum got information he will get a new Axon 7 from ZTE.
He did also send it in for repair because the same issue. It seems even ZTE (europe/germany) does not have the tools/knowledge to flash a stock rom on such bricked devices.
I ask myself what the hell they did or think in reducing the features (for the G model) in fastboot/adb/firmware to that grund. I am a long time in Android but never had a device were there was no chance to (re)flash at least an official stock rom.
themarcc said:
...
Click to expand...
Click to collapse
Try to access the FTM (Factory Test Mode) by holding the power button and the volume down button. It will say FTM on the display if it was successful.
In case you are still stuck in DFU mode you might have to hold the power button for at least 6 seconds to get the phone to try to reboot.
If you can get into the FTM mode connect the Axon 7 to your PC.
It should show up in the device manager as a Android ADB device.
adb reboot edl
Your screen should go blank and the device should show up as 'Qualcomm HS-USB QDLoader 9008 com X' in device manager. If you get this far you can use tenfar's axon7root.exe to flash the boot.img and the recovery.img and the phone should boot up normally after that.
Are you sure talking about A2017G? I was able to enter stock recovery (volume up and power). All other key combination leads to DFU mode, regardless the phone was plugged in or not. And believe me, I tried even stupid ones.
But will try when it is back from repair.
DeJe63 said:
Are you sure talking about A2017G? I was able to enter stock recovery (volume up and power). All other key combination leads to DFU mode, regardless the phone was plugged in or not. And believe me, I tried even stupid ones.
But will try when it is back from repair.
Click to expand...
Click to collapse
I'm talking about the G model of course, on the U version this wouldn't be a problem.
Hope other people who still have their bricked G version phones try this so we can clarify if there's a chance to get into the FTM mode and can determine which 'type' of brick could potentially be revived.
No clue if this is a possibility if the wrong kind/corrupt/whatever bootloader got flashed to the phone but it's worth a try.
Edit: Read in another thread that another user stuck in DFU mode on the G model couldn't make the FTM mode work so there's little hope for this to be working unfortunately.
I do have a question as well. My G model only boots til ENTER ANDROID PASSCODE. Cannot boot into recovery only FTM is possible. Device Manager indicates an adb device, but there seems to be a special driver. Does anyone know how to help?
Thanks in advance...Marcus
Gesendet von meinem Lenovo K50a40 mit Tapatalk
try it with "default_password" without the "
I just tried it several times. After some time it says: 'wrong password' , unfortunately
Gesendet von meinem Lenovo K50a40 mit Tapatalk
marcus.linkenbach said:
I just tried it several times. After some time it says: 'wrong password' , unfortunately
Gesendet von meinem Lenovo K50a40 mit Tapatalk
Click to expand...
Click to collapse
Hi Marcus,
I have got the same problem. Did you find any solution since then?
Anyone give me any suggestion please ... :crying:
Yes. The solution was to set it up for a repair. They changed my device without any problems. I told them my phone entered into this state by upgrading on an ota update.
sent from zte axon 7 with tapatalk
marcus.linkenbach said:
Yes. The solution was to set it up for a repair. They changed my device without any problems. I told them my phone entered into this state by upgrading on an ota update.
sent from zte axon 7 with tapatalk
Click to expand...
Click to collapse
Hi,
I have finally found the solution. I have boot into edl mode via FTM and re-flash TWRP then do a factory reset. Now, it coming back !!
:good:
dolvliz said:
Hi,
I have finally found the solution. I have boot into edl mode via FTM and re-flash TWRP then do a factory reset. Now, it coming back !!
:good:
Click to expand...
Click to collapse
Good to know. But for that I got second cable, charger, headset and cover ??
sent from zte axon 7 with tapatalk
Hello,
as per subject I need help rooting my device I tried all methods, @tdm method is using the US version and it is different from the EU one.
my spec:
7.1.1 (stock)
ZTE B2017GV1.2.0B13
Bootloader Locked
tulip is not working, I can't get the device to enter fastboot/EDL mode no matter how I tried.
please help guys :crying::crying::crying:
If you cannot get to EDL mode, try an EDL cable (aka. deep flash cable). Like this:
https://www.amazon.com/gp/aw/d/B0792YKWPZ
I bought one. It works great. But it takes a couple weeks to ship from China.
If you are impatient, you can try this method, but be very careful:
http://en.miui.com/thread-310325-1-1.html
I have also tried this method and it works.
Note, you can unplug the phone to retrieve the wire. Once in EDL mode, the phone will stay in EDL mode until it is reset.
axtenar said:
Hello,
as per subject I need help rooting my device I tried all methods, @tdm method is using the US version and it is different from the EU one.
my spec:
7.1.1 (stock)
ZTE B2017GV1.2.0B13
Bootloader Locked
tulip is not working, I can't get the device to enter fastboot/EDL mode no matter how I tried.
please help guys :crying::crying::crying:
Click to expand...
Click to collapse
Have you tried Axon 7 EDL tool? It forces the phone into EDL mode and works for the mini too.
donev_go said:
Have you tried Axon 7 EDL tool? It forces the phone into EDL mode and works for the mini too.
Click to expand...
Click to collapse
For mini is [Axon7 mini EDL Tool].