Related
Hi Guys,
today I orderd my Nook Color and i am really excited. In Fact iam not interest into the reading functions, i just want to ust it as an Android Tablet.
Furthermore i am from Germany, so i believe iam unable to get an account,right?. I read the following on nookdevs:
"Before rooting, you need to complete BN's registration process, you will not be able to link your NC to your BN account to buy books after rooting. Do Not Proceed with Rooting unless the Nook is Registered, You will not be prompted to register with BN once you have completed the Root Process.
I believe i dont need an B&N Account at last, don't i? Or is there something i am missing?
Greetings from Germany
If you don't ever want it as a e-reader, possibly. I'm curious myself.
Since you can run Clockwork Recovery from an SD card and install alternative ROMs that way I would think that you won't need to register.
However someone more experienced can voice her/his view.
I've always assumed that the main reason you were supposed to register before rooting was that you couldn't register after rooting, but that the only reason to register was to be able to access Barnes & Noble ebooks. If you can't access B&N (as evidently is the case overseas) or you don't care about being able to access their content then I don't think it would matter if you didn't register. Now, I know you can un-root to go back to stock but I don't know if in that un-rooted state you could then register a device.
I think you have to register to access the device stock. However if you plan to wipe the internal memory from day 1 like I did, I think it doesn't matter.
I hope this is fixable. I'm running ManualNooter 4-6-16 and have been for months, no problem. Then all of a sudden, today it stops working. It just won't boot. I was using it, and it was working great. I came back later it was locked up, wouldn't come out of standby. I held down power and N to turn it off, which was all i was able to do, now it wont boot at all. It gets to the nook color screen then locks up. So I do a total wipe and re install ManualNooter. Now it does get to the Nook Color screen but it's the B&N one not the pretty MN one. And it locks up on the setup program at "Enabling Wifi". Trying a Nandroid Restore now but I don't know if that has any chance of working. It's going veeerrrrrry slowly. Any ideas?
You could try flashing something to an SD card, booting that, and seeing what the problem is from that. Or try flashing a whole new rom.
alunral said:
You could try flashing something to an SD card, booting that, and seeing what the problem is from that. Or try flashing a whole new rom.
Click to expand...
Click to collapse
I don't want a new ROM tho, I'd go back to stock before I'd use CM or MIUI. I need the stock reader. Which brings up another question. How do I revert to stock?
Did you update flash or Su before this happened?
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
Did you update flash or Su before this happened?
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
No, I did a Nandroid Restore and it booted... twice. Now it's doing the same thing again. Not finishing a boot. I have books that I've bought on B&N so I can't run CM or MIUI cuz I need to read them.
Just a side note, you don't need BN stock to read BN books. You can either use the nook app or an app called Aldiko Reader - both are free in the android market place. I'm not a fan of the nook app - basically use it to download my bn books to my sd card. I got the pro version of Aldiko and format it perfectly. Only difference from stock is I have to tap the screen to get the page number I'm on. When you pull your books into Aldiko from bn, it will ask for your login and password. The login is the name on your cc and password is cc number you used to purchase. You only have to do that once, and then rest of bn books come in.
Hope you find a fix to your other problems.
shelly29 said:
Just a side note, you don't need BN stock to read BN books. You can either use the nook app or an app called Aldiko Reader - both are free in the android market place. I'm not a fan of the nook app - basically use it to download my bn books to my sd card. I got the pro version of Aldiko and format it perfectly. Only difference from stock is I have to tap the screen to get the page number I'm on. When you pull your books into Aldiko from bn, it will ask for your login and password. The login is the name on your cc and password is cc number you used to purchase. You only have to do that once, and then rest of bn books come in.
Hope you find a fix to your other problems.
Click to expand...
Click to collapse
I have it installed and open on my Evo and so far it's only showing Adobe books(i only have one) and I cant find where to add my B&N account how do you do this?
Ideas anyone? It still isn't booting and I'm at a loss what to do now.
No idea about the boot problem, but for the book issue, I back up everything with Calibre, and backup the Calibre library as well! It does a good job of puting the books in the right place. I don't know about an Evo, but if it is Android, I would think it has a "My Files" directory on the SD Card, within that directory copy your books to books in my files and that should work. If there is a problem, try using Calibre. Sometimes there are DRM issues and you can't open things unless it is in the correct directory (happened to me a couple of times) and Calibre can fix the problem just by adding them to it's library and copying them to the reader. In Alkido you will have to click the home button(top left) then SD Card (bottom left) and you can browse to where your books are.
Once you backup your books, and all the apps you need, maybe try starting with a clean slate and a new ROM. There is an installer to install a copy of the stock ROM and remove CWM if you need to send for warranty replacement. I don't know exactly where is is, but it was in the nook forum here.
I have books that I've bought on B&N so I can't run CM or MIUI cuz I need to read them.
Click to expand...
Click to collapse
Yes you can. Install CM7 and use the Nook app. Any book you bought that is in your library (or archived) will always be available to the app.
Does not work for some of the magazines and books
hey, I am new to the tablet world, I tried to search for this and look in the recent post and didnt really find the answer I was looking for....
So if I buy a new or refurbished Nook Color right now from B&N... will I be able to root it?!
this article is old... so I am not sure if this is the case?
any advice Please
WARNING - READ THIS FIRST: Barnes and Noble has introduced a new hardware revision which bricks your unit if you install their official 1.0.0 Firmware (A step needed to root). As of right now, Nooks with serial #s starting with 1003 (running firmware 1.5) cannot be rooted, and should NOT be attempted. See nookdevs New_Hardware_Revision for more details before you think of trying this!
Click to expand...
Click to collapse
from:
nooktalk.net/news/time-to-hack-root-your-nook
THANKS!
cant post the regular link yet
Just buy from eBay or Craigslist you'll find it cheaper n rootable
Sent from my NookColor using XDA Premium App
Well, where is the difference if I buy it new from eBay?! How is it more or less rootable...? If it is new it is new No matter where it comes from or?!
and 135$ for refurbished didn't seem bad... Or?!
Sent from my PC36100 using XDA App
First.... those may be Nooks and NOT Nook Colors... The newest firmware for Nook Color or Nook Tablets is 1.4.1 and you reference FW ver 1.5.
Also, I don't know of any NC's or NT's with serial numbers below 2000 first 4 digits.
Additionally, with the newer rooting tools available, you don't need to install anything prior to 1.4.1 to root them.
alexwick said:
[...] From:
nooktalk.net/news/time-to-hack-root-your-nook
Click to expand...
Click to collapse
At the very top of that article, it states:
Last Updated on Wednesday, 29 December 2010 12:54
You might find reading more recent articles a bit more revealing. A few things have happened since 2010.
I am aware the article is old... So short answer...
A new bought nook can be rooted?!?
Sent from my PC36100 using XDA App
Short answer, yes.
My base FW is 1.0.0. I'm running the 20120217 build of Mirage-Kang from eMMC.
I can't imagine how it could get much more rooted than this unless it would be to follow the directions to root it to the letter but if I did that then I wouldn't be much of an Asshole and I am a journeyman Asshole so there you have it.
Oh, and I don't feel terribly compelled to take it out of the case to look at the serial.
MISRy said:
Short answer, yes.
My base FW is 1.0.0. I'm running the 20120217 build of Mirage-Kang from eMMC.
I can't imagine how it could get much more rooted than this unless it would be to follow the directions to root it to the letter but if I did that then I wouldn't be much of an Asshole and I am a journeyman Asshole so there you have it.
Oh, and I don't feel terribly compelled to take it out of the case to look at the serial.
Click to expand...
Click to collapse
But do you have a Nook... or a Nook Color?
I mean yeah the Nook is rootable... but I didn't know a Mirage Kang was done for it.
Just ordered a refurbished nook color for 135$ hope will get it rooted fine... Which is the best thread for noobs here to get it rooted?!
Sent from my PC36100 using XDA App
alexwick said:
Just ordered a refurbished nook color for 135$ hope will get it rooted fine...
Click to expand...
Click to collapse
Since there is a manual nooter for the 1.4, there's no problem rooting it.
Which is the best thread for noobs here to get it rooted?!
Click to expand...
Click to collapse
Which rooting do you wish to do? If you want to run the stock B&N apps side by side with apps downloaded from the B&N market, then first register the refurbished system with B&N, then go to NC developer forum and look in "[NC][1.4.1] ManualNooter 5.02.19". That's a couple of minor version steps past the one I used, but it looked like its got it all pulled together from the three different sources of info I used last month.
I wanted to keep Nook Comics support in the stock ereader, so I opted for the manual nooter.
If you want to do a CM7/CM9/MIUI root, which installs alternate firmware for the system instead of modifying the existing firmware to allow Android market apps ... well then, I dunno, as after experimenting with a CM7 sd sidecard, I opted for the manual nooter approach. I'd look in the developer forum for the most recent thread with detailed install instructions for the firmware I wanted to install.
Pretty off topic, but this helped me when I needed to exchange a nook color that I had lost the box for. If you need your serial number, it is inside the flap that covers the micro SD slot.
There are other ways to find it, but if you are on the phone with support and a rooted nook, this is a useful thing.
I also just bought a refurb Nook Color. It is running 1.3.0 out of the box. I want to root it then install CM7. However I can't find any clear posts on how to. Either they are all for earlier FW or 1.4. Should I update to 1.4 before Nootering? If so which MNooter should I use? Or is it recommended to just Nooter 1.3? Again which Mnooter should I use for 1.3?
Thanks
BruceMcF said:
Since there is a manual nooter for the 1.4, there's no problem rooting it.
Which rooting do you wish to do? If you want to run the stock B&N apps side by side with apps downloaded from the B&N market, then first register the refurbished system with B&N, then go to NC developer forum and look in "[NC][1.4.1] ManualNooter 5.02.19". That's a couple of minor version steps past the one I used, but it looked like its got it all pulled together from the three different sources of info I used last month.
I wanted to keep Nook Comics support in the stock ereader, so I opted for the manual nooter.
If you want to do a CM7/CM9/MIUI root, which installs alternate firmware for the system instead of modifying the existing firmware to allow Android market apps ... well then, I dunno, as after experimenting with a CM7 sd sidecard, I opted for the manual nooter approach. I'd look in the developer forum for the most recent thread with detailed install instructions for the firmware I wanted to install.
Click to expand...
Click to collapse
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Optimus V Prime said:
I also just bought a refurb Nook Color. It is running 1.3.0 out of the box. I want to root it then install CM7. However I can't find any clear posts on how to. Either they are all for earlier FW or 1.4. Should I update to 1.4 before Nootering? If so which MNooter should I use? Or is it recommended to just Nooter 1.3? Again which Mnooter should I use for 1.3?
Click to expand...
Click to collapse
You do not need to root the B&N firmware before loading CM7. You do need to decide whether you want to run CM7 on internal eMMC or external SD. If you plan to install CM7 to eMMC, you will over-write the B&N firmware, so rooting it is pointless. Once you've decided that, we can point you in the right direction.
There are also guides here on rooting B&N firmware that you can locate with a bit of searching.
---------- Post added at 03:18 PM ---------- Previous post was at 03:14 PM ----------
alexwick said:
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Click to expand...
Click to collapse
Yes, you can.
alexwick said:
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Click to expand...
Click to collapse
Yes, as I said, that's the setup I was using when I decided I prefer a manual nooter. Among your choices, you can:
(1) Replace the stock firmware with an alternative, such as CM7
(2) Run CM7 off a booting SD card and run stock B&N from internal memory
(3) Root the stock B&N system and then load and run Android market apps alongside the B&N built-in and B&N store apps.
I wanted to keep the features of the 1.4.1 ereader, including Nook Comics support, so for me (1) was out, and I only needed a few apps from the Android Store, so I finally settled on (3) to avoid having to boot back and forth between the two systems. But first I did (2) to try things out and get an idea of whether I wanted to root the B&N firmware or replace it with something like CM7.
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Yes, as I said, that's the setup I was using when I decided I prefer a manual nooter. Among your choices, you can:
(1) Replace the stock firmware with an alternative, such as CM7
(2) Run CM7 off a booting SD card and run stock B&N from internal memory
(3) Root the stock B&N system and then load and run Android market apps alongside the B&N built-in and B&N store apps.
I wanted to keep the features of the 1.4.1 ereader, including Nook Comics support, so for me (1) was out, and I only needed a few apps from the Android Store, so I finally settled on (3) to avoid having to boot back and forth between the two systems. But first I did (2) to try things out and get an idea of whether I wanted to root the B&N firmware or replace it with something like CM7.
Click to expand...
Click to collapse
It think I wanna go for option 2&3, can I not root the B&N internal system and also run CM 7 from SD card?
Do I have to take the SD card in and out depending in which one i wanna boot!?
Also another question... The whole reason this rooting is done if I understand correctly is to have access to all the systems in the NC, where do I get the Apps from ? Do I still have to get them through the market? Or can I download them somewhere!?
Got a question... Git my nook today, and it seems to be lagging quite a bit sometimes... Is that normal? Sometimes tottaly unresponsive... Is this normal?!
Sent from my PC36100 using XDA App
alexwick said:
It think I wanna go for option 2&3, can I not root the B&N internal system and also run CM 7 from SD card?
Do I have to take the SD card in and out depending in which one i wanna boot!?
Click to expand...
Click to collapse
Taking the SD card in and out depending on which one I wanted to boot, then full power off and power on was the way I did it. Don't know if there's a better way, but never saw a better way mentioned.
You can indeed run CM7 from an SD card and root the B&N internal system. That would allow you to use Nook Tweaks in the CM7 side to, for example, run a keyboard off the USB port and overclock the chip ~ neither of which you can do with the stock kernel ~ and still have the use of the 1.4.1 ereader for Nook Comics or media-enhanced ebooks.
Get a main microSD card for the CM7 SD card install. Follow the CM7 SD card instructions to do the CM7 SD card install on the big card.
And then get another microSD card (2GB Class 4 is plenty) and follow the 1.4.1 manual nooter instructions to root the stock B&N kernel.
Also another question... The whole reason this rooting is done if I understand correctly is to have access to all the systems in the NC, where do I get the Apps from ? Do I still have to get them through the market? Or can I download them somewhere!?
Click to expand...
Click to collapse
If you follow the CM7 SD card install directions, you will have access to the full Android Market on that install. Same thing if you follow the 1.4.1 manual nooter instructions ~ you will have access to the Android Market via the Nook Color Application Manager, and if you want can put the Android Market on the B&N Home Screen.
Its best to have a gmail.com account already, for the Android market registration, so sign up for one of those before starting the process if you don't already have one. And from the Android Market, you can also install the other markets (Amazon, 1mobile, GetJar) if you prefer one of those.
alexwick said:
Got a question... Git my nook today, and it seems to be lagging quite a bit sometimes... Is that normal? Sometimes tottaly unresponsive... Is this normal?!
Click to expand...
Click to collapse
It can be laggy, especially if you have too much load on it. Sometimes I'm surprised at how many windows I have open in the stock browser. Turning it all the way off will shut down apps that you may have left unclosed, free up RAM, and its normally back to its normal self.
Mind, the gurus have Android apps that can be used to shut down individual apps, but the brute force approach seems to work for me.
thanks for the quick detailed reply...
for the LAGS, well I dont have hardly anything open... the only thing i installed and bought was from the market. Angry Birds... and it seems sometime it will not respond to the throwing of the bird, but just scale the screen... even to exit the game and after the game is closed it seems to not respond properly... having to tap a button 5 times until it responds... and than it works fine after a reboot... and than a couple hours later same thing in the game... ..
also it seems like internetpages like nick.com seem to load forever and are very laggy. I ahve a 10 MBIT Internet connectio over wifi, so that shouldnt be a problem....
To teh dual Systems...Do I also need a second 2GB card for the rooted internal stock system, or is that just for the installation of it!?
I actually do have a 16 GB and a 2 GB at home already...
"If you follow the CM7 SD card install directions, you will have access to the full Android Market on that install. Same thing if you follow the 1.4.1 manual nooter instructions ~ you will have access to the Android Market via the Nook Color Application Manager, and if you want can put the Android Market on the B&N Home Screen."
Click to expand...
Click to collapse
Well on my android phone... most of the apps are available I believe for free on the forums... is this similar here... or do I have to buy them!? BTW My phone is not rooted...
The System is some 1.3 version I received... will I need to update to 1.4 first!?
I also do already have a gmail account... its a german one though [email protected] but that should be fine ... It is the german GMAIL
Also linked the nook to th BN Store I believe...Is tehre any waay to check?!
Should I not be able to stream netflix... with the regular nook!?
ONCE AGAIN THANKS FOR YOUR TIME !!!!
alexwick said:
... also it seems like internetpages like nick.com seem to load forever and are very laggy. I ahve a 10 MBIT Internet connectio over wifi, so that shouldnt be a problem....
Click to expand...
Click to collapse
That's just the stock Android Browser and an 800MHz single core system with 512Mb RAM plowing through a site with all the bells and whistles and targetted at a PC. Try the Dolphin HD browser (its in the B&N store, and its free so no worry about having to re-download it from the Android market to your CM7 install) ... it has an option to hold off flash content until you actually want to run it that can really speed up some sites.
To teh dual Systems...Do I also need a second 2GB card for the rooted internal stock system, or is that just for the installation of it!?
I actually do have a 16 GB and a 2 GB at home already...
Click to expand...
Click to collapse
Installation ... you want a good sized card for the CM7 install, and reading and storing an image from a large card, then formatting it and writing the install card image, then saving the install card image, formatting, and restoring the CM7 install image is a royal pain.
Note that you probably want to keep the install card as a bootable recovery card. 1GB is enough to do the manual noot, but 2GB is enough to hold the recovery of the original stock B&N before you do the manual root. 4GB is even better, as it can hold a recovery of the stock B&N as well as a recovery of the system right after it is manually nooted, in case you do something later to get it messed up.
And you can get a 4GB Class 4 card for $5 with free shipping from Amazon ~ the new 32GB flash cards have pushed the price of the smaller ones way down ~ so to my mind that's worth it to be able to set aside a recovery card.
Well on my android phone... most of the apps are available I believe for free on the forums... is this similar here... or do I have to buy them!? BTW My phone is not rooted...
Click to expand...
Click to collapse
Yes. There are paid apps, but both the CM7 install or the manual nooter give full access to a wide range of free apps on the main Android Market, and allow you to install 1mobile, GetJar, or Amazon if you prefer any of those markets.
The System is some 1.3 version I received... will I need to update to 1.4 first!?
Click to expand...
Click to collapse
Not for the SD card install of CM7. Be sure to follow the instructions for making an SD card install on a 1.3 system.
You'll want to upgrade for a rooted stock B&N Kernel to 1.4.2, because its only 1.4 that has the updated ereader, Nook Color tailored Netflix app, likely B&N Store HuluPlus this Friday ... if you were replacing the stock Kernel, there's be no reason to update, and the installs for the 1.3 system are more mature ... but if you want to keep the B&N Kernel, upgrade to 1.4.2. before you lock it down from further OTA updates.
I also do already have a gmail account... its a german one though [email protected] but that should be fine ... It is the german GMAIL
Click to expand...
Click to collapse
I'd don't know from personal experience, but I've seen some warnings about it being best to have a gmail.com account. Just to be safe, I'd sign up for a gmail.com account and give your primary gmail account as the email account used to confirm that you are a real person. Save it in an "Accounts" folder in your main gmail if you are unlikely to use it for anything except the Android market.
Also linked the nook to th BN Store I believe...Is tehre any waay to check?!
Should I not be able to stream netflix... with the regular nook!?
ONCE AGAIN THANKS FOR YOUR TIME !!!!
Click to expand...
Click to collapse
Before you start working on the unit, go to the store (its on the navbar) search for apps and download a free app. Dolphin HD is a good one. If it downloads and installs, you are linked to the B&N store.
I have quite a few NOOK Read To Me books that will not show up in my library. I have CM7.2 with the latest version of the Nook app from the Play Store. I can buy other books fine and they download immediately, but not these. Any idea why? The device is registered with the same account that I'm using for the app.
I paid for these books and actually can't download them onto the PC and transfer them (they say the item can't be downloaded from a browser).
Any help is appreciated.
japaneezy said:
I have quite a few NOOK Read To Me books that will not show up in my library. I have CM7.2 with the latest version of the Nook app from the Play Store. I can buy other books fine and they download immediately, but not these. Any idea why? The device is registered with the same account that I'm using for the app.
I paid for these books and actually can't download them onto the PC and transfer them (they say the item can't be downloaded from a browser).
Any help is appreciated.
Click to expand...
Click to collapse
I don't think the read to me books work on the nook android app. I think you have to be on the stock reader.
Sent from my Nook HD+ Running CM10 on SD
japaneezy said:
I have quite a few NOOK Read To Me books that will not show up in my library. I have CM7.2 with the latest version of the Nook app from the Play Store. I can buy other books fine and they download immediately, but not these. Any idea why? The device is registered with the same account that I'm using for the app.
I paid for these books and actually can't download them onto the PC and transfer them (they say the item can't be downloaded from a browser).
Any help is appreciated.
Click to expand...
Click to collapse
Read to me books can only be read on the bn stock firmware. Hope you still have stock firmware on emmc. To see the read to me books on the android bn reader app, go to first drop down box, press "all items", select "everything else". You will see all your read to me books, but you will not be able to open them. Has to do with bn proprietary software and adobe air. If you have cm7.2 in emmc you can put bn stock firmware on SD or internal alternate boot.
Any way to download/save them and re-flash cm7.2?
japaneezy said:
Any way to download/save them and re-flash cm7.2?
Click to expand...
Click to collapse
No. Once you have BN stock firmware set up either on SD card or emmc you can sign into your BN account and re-sync the device. You will then be able to see your purchased items. Look at LeapinLar's tips thread to restore BN stock firmware. You have several options on where you put the stock ROM and cm7/10.
One annoying feature of new Nook HD+ (and assuming Nook HD) is that during initial set up it will look for and force you to update (if one is found). There is a neat and really easy trick to bypass this process.
Once you get to that step in the process, during the process hold down the power button and force it to shut off by selecting "OK" in the prompt. You have to do it before it finishes downloading the update.
Once you power it back on you'll have to restart the whole process of entering your WiFi and information again. When you get to the point where the device looks for an update, it will look for a few seconds and determine that its got the latest version installed and proceed to the next phase.
To make sure you did it correctly just go into "Settings" and check the version. For me my default was 2.0.4, for you it may be different, but either way its not 2.0.5.
I've tested it multiple times and always with great success.
What about 2.0.4 do you prefer over 2.0.5?
Also, let us know if this actually stays on 2.0.4. Those of us who had already registered Nooks (both HD and HD+) when 2.0.5 came out got updated in spite of having turned off auto updates.
lkmiller said:
What about 2.0.4 do you prefer over 2.0.5?
Also, let us know if this actually stays on 2.0.4. Those of us who had already registered Nooks (both HD and HD+) when 2.0.5 came out got updated in spite of having turned off auto updates.
Click to expand...
Click to collapse
It was for rooting purposes, since at the time I couldn't find a rooting tool for 2.0.5, that's why. Also I too had registered once under 2.0.5, and when starting fresh found that this method does work regardless of what you initially registered under. Though it only buys you little time to do whatever modifications you need to to your device before it automatically updates you (you could also leave WiFi turned off too).
dcoke said:
It was for rooting purposes, since at the time I couldn't find a rooting tool for 2.0.5, that's why. Also I too had registered once under 2.0.5, and when starting fresh found that this method does work regardless of what you initially registered under. Though it only buys you little time to do whatever modifications you need to to your device before it automatically updates you (you could also leave WiFi turned off too).
Click to expand...
Click to collapse
What device are you running? Still would like your factory zip.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
dcoke said:
It was for rooting purposes, since at the time I couldn't find a rooting tool for 2.0.5, that's why. Also I too had registered once under 2.0.5, and when starting fresh found that this method does work regardless of what you initially registered under. Though it only buys you little time to do whatever modifications you need to to your device before it automatically updates you (you could also leave WiFi turned off too).
Click to expand...
Click to collapse
Ok, I thought that might be why. Thankfully we can root 2.0.5 now. But it's good to know this method of postponing that initial update if I ever need to reset and start over.
nook hd+ auto-updated after leapinlar root+cwm fixes
My Nook HD+ notified me last night that it had auto-updated to 2.0.6 but I was able to get back my original Nova Prime Launcher and the Google Play store continues to work (it broke Beautiful Widgets, but uninstalling it and reinstalling it fixed that)
I had originally rooted it from 2.0.5 using the Universal Root method here: http://forum.xda-developers.com/showthread.php?t=2062613
I had the following images installed:
NookHD-HDplus-Gapps+Extras-for-stock-rev1.zip
NookHD-HDplus-Universal-Root-rev1.zip
NookHD-HDplus-LocationServices.zip
Using CWM for here:
NookHDplus-bootable-CWM-6023-for-emmc-stock-4GB-rev1.zip
Note - I did not manually update or in anyway 'induce' the update, it just happened. Did I miss something in the instructions to prevent auto-update?
Atleast the play store and Nova Launcher keeps working (not had time to check if root is still working though) But I did notice that the B&N Home launcher keeps showing up more often than before (hitting apps and going back brings back Nova)
Thanks
vtmanryn said:
My Nook HD+ notified me last night that it had auto-updated to 2.0.6 but I was able to get back my original Nova Prime Launcher and the Google Play store continues to work (it broke Beautiful Widgets, but uninstalling it and reinstalling it fixed that)
I had originally rooted it from 2.0.5 using the Universal Root method here: http://forum.xda-developers.com/showthread.php?t=2062613
I had the following images installed:
NookHD-HDplus-Gapps+Extras-for-stock-rev1.zip
NookHD-HDplus-Universal-Root-rev1.zip
NookHD-HDplus-LocationServices.zip
Using CWM for here:
NookHDplus-bootable-CWM-6023-for-emmc-stock-4GB-rev1.zip
Note - I did not manually update or in anyway 'induce' the update, it just happened. Did I miss something in the instructions to prevent auto-update?
Atleast the play store and Nova Launcher keeps working (not had time to check if root is still working though) But I did notice that the B&N Home launcher keeps showing up more often than before (hitting apps and going back brings back Nova)
Thanks
Click to expand...
Click to collapse
We have known for a while that setting the OTA to manual does not seem to stop auto updates anymore. The good news is that it still accepts the root. Just flash universal root again.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
I might have found a way how to disable Nook HD OTA autoupdate feature.
For some reason setting com.bn.device.fota.mode to manual does not work, so there is more straight approach to solve this.
So far i have found two:
1) Once you have rooted your device it is just a matter of editing /etc/hosts file and adding couple of lines
127.0.0.1 nook.com
127.0.0.1 barnesandnoble.com
127.0.0.1 su.barnesandnoble.com
which effectively blocks access to autoupdates, but when you reboot your device, all your data will be erased (nook will restore itself to factory state). So some way around is needed.
2) There is an app on google store called "Android Firewall", install it. Once installed block Wifi for NookConnectivityService. GAPPS and browser will not be affected, you'll get norification "Wifi error". But otherwise wifi is fuctional.
2) There is an app on google store called "Android Firewall", install it. Once installed block Wifi for NookConnectivityService. GAPPS and browser will not be affected, you'll get norification "Wifi error". But otherwise wifi is fuctional.
Click to expand...
Click to collapse
Blocking NookConnectivityService kills connectivity to the Google Play.
greenya said:
1) Once you have rooted your device it is just a matter of editing /etc/hosts file and adding couple of lines
127.0.0.1 nook.com
127.0.0.1 barnesandnoble.com
127.0.0.1 su.barnesandnoble.com
which effectively blocks access to autoupdates, but when you reboot your device, all your data will be erased (nook will restore itself to factory state). So some way around is needed.
Click to expand...
Click to collapse
You can symlink the hosts file. See my HD/HD+ tips thread linked in my signature. Look at item 15. Of course there are othe ways to prevent the update, like symlinking build.prop and doing the white on white repair. But those just cause the update to fail, while this may prevent them even checking. If this works, I may update my CWM zip to include it.
EDIT: After researching this a little I have found an easy way to accomplish this. That is to use AdAway. You can safely use that program if you configure it to put the hosts file on /data. It automatically symlinks it for you. But you need to be rooted to use this app. And it has a feature where you can add your own sites to block. Just add those sites listed in the post above. Then every time AdAway updates its own list, it adds your list to it also. This will block B&N from using those sites to download their updates. But realize that it also blocks you from browsing their site.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
EDIT: After researching this a little I have found an easy way to accomplish this. That is to use AdAway. You can safely use that program if you configure it to put the hosts file on /data. It automatically symlinks it for you. But you need to be rooted to use this app. And it has a feature where you can add your own sites to block. Just add those sites listed in the post above. Then every time AdAway updates its own list, it adds your list to it also. This will block B&N from using those sites to download their updates. But realize that it also blocks you from browsing their site.
Click to expand...
Click to collapse
Nice! It works then Including it to CWM zip is a good idea, with a warning, that you get to loose one site. That rooting thing imho is the whole reason for not using it, but substituting with google play.
BTW Is your hybrid cm10.1 stable on nook hd+ ?
greenya said:
Nice! It works then Including it to CWM zip is a good idea, with a warning, that you get to loose one site. That rooting thing imho is the whole reason for not using it, but substituting with google play.
BTW Is your hybrid cm10.1 stable on nook hd+ ?
Click to expand...
Click to collapse
WARNING! Hybrid not for HD+ !!!
greenya said:
BTW Is your hybrid cm10.1 stable on nook hd+ ?
Click to expand...
Click to collapse
My Hybrid setup on the HD+ is experimental and a hacked version by me. And I am running verygreen's 1-07 version of CM10.1. The Hybrid works great and is very stable, but the CM10.1 is buggy.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
My Hybrid setup on the HD+ is experimental and a hacked version by me. And I am running verygreen's 1-07 version of CM10.1. The Hybrid works great and is very stable, but the CM10.1 is buggy.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
Seems i missed somewhere something
datas0ft said:
Seems i missed somewhere something
Click to expand...
Click to collapse
You did not miss it. I just got it working this weekend and this is the first I have told anyone. I am going to test it a while before I even consider making it for anyone else. It does work but I had to manually configure some things. And it only works on CM10.1, not CM10. Until we get some better CM10.1's it does not really matter anyway.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
You did not miss it. I just got it working this weekend and this is the first I have told anyone. I am going to test it a while before I even consider making it for anyone else. It does work but I had to manually configure some things. And it only works on CM10.1, not CM10. Until we get some better CM10.1's it does not really matter anyway.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
This news change many things. But seems verygreen is so busy last time or found something new interesting.
Anyway. If you need some "hard testing" (when testing may make item dead) then ask me. I have one item with no warranty and ... you know, its not mine ... and its not last one.
greenya said:
I might have found a way how to disable Nook HD OTA autoupdate feature.
For some reason setting com.bn.device.fota.mode to manual does not work, so there is more straight approach to solve this.
So far i have found two:
1) Once you have rooted your device it is just a matter of editing /etc/hosts file and adding couple of lines
127.0.0.1 nook.com
127.0.0.1 barnesandnoble.com
127.0.0.1 su.barnesandnoble.com
which effectively blocks access to autoupdates, but when you reboot your device, all your data will be erased (nook will restore itself to factory state). So some way around is needed.
2) There is an app on google store called "Android Firewall", install it. Once installed block Wifi for NookConnectivityService. GAPPS and browser will not be affected, you'll get norification "Wifi error". But otherwise wifi is fuctional.
Click to expand...
Click to collapse
Thank you for this. It works. I added the manual way to do it via AdAway to my HD/HD+ Tips thread and added a CWM zip to my HD/HD+ CWM thread to automatically do it for you if you are not rooted. Both threads are linked in my signature.
Sent from my Nook HD+ running rooted stock
leapinlar said:
Thank you for this. It works. I added the manual way to do it via AdAway to my HD/HD+ Tips thread and added a CWM zip to my HD/HD+ CWM thread to automatically do it for you if you are not rooted. Both threads are linked in my signature.
Sent from my Nook HD+ running rooted stock
Click to expand...
Click to collapse
Could you also just freeze the NookConnectivityService app using Titanium Backup - seems to work for me
docfreed said:
Could you also just freeze the NookConnectivityService app using Titanium Backup - seems to work for me
Click to expand...
Click to collapse
Someone earlier says doing that blocked his Google Play. Is yours working ok?
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Someone earlier says doing that blocked his Google Play. Is yours working ok?
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
If you mean the Play Store, yes no problem - I don't use any other Play apps (like music, books, etc.). I am on 2.06, rooted, ADW EX Launcher and see no issues whatsoever with WiFi (as a matter of fact, no issue signing in to BN.com and downloading one of my books.