Hi all,
I have an Omnia 7 currently in RAM dump state (displays ARM9 Fatal Error or Force RAM dump Mode!! Connect the device to PC and Dump Memory!!).
The phone goes in Download mode with Vol+/Camera/Power but my computer detects it only for 2 seconds and then disconnects. Tried to hook it up to the WP7 downloader, it detects the port for 2 secs and then disconnects.
Tried it with 3 different cables, in 2 desktops and 3 laptops, all USB port and no go.
Can someone help?
Many thanks in advance!
Genci
Edit: Phone disposed.... Case closed
Related
Hi,
I keep getting error (Code 43) when trying to upgrade my O2 2002 ROM to WM2003SE.
I've tried everything to get around the error, the only thing i haven't changed yet is the bootloader version. (Currently on v 5.22)
If anyone can provide some advice this would be great.
Thanks
W
Bootloader 5.22 is alright. Have it also and do not have any Problems with it.....
Have you tried another PC to do the upgrade?
Stefan
Hi Stefan,
Yeah - I have tried other machines to do the upgrade - 2 laptops and a desktop.
All report the same error.
The wierd thing for me is that it seems to be Windows XP that reports the error - I get a Code 43 error in device manager - I've attached an image of the error i get.
I've also upgraded all my laptops USB drivers, chipset, BIOS - basically everything to see if it was a problem with a version of the driver or firmware i was running but the error remains unchanged.
Everything runs just fine until Programme A wants to upload the new image - the screen where you should see the progress bar as the new ROM is uploaded - I see that screen for a split second before the Qtek reboots back into the old ROM!
Thanks for the reply
W
Code 43
Windows has stopped this device because it has reported problems. (Code 43)
You could try a different usb port and also make sure it is connected direct and not through a hub.
Yup!
Tried both my USB ports, also tried disabling the "USB Root Hub" in Device manager - I don't have a USB hub plugged into my laptop, but there is one reported in Device Manager - I guess it's internal to the PC?
I figured that if there was a hub built into the laptop that would cause the communication problems experienced by USB hubs.
I couldn't disable all the USB Root Hub instances without switching off the USB port, so i closed all the ones i could and still have the port alive.
Still got the problem - The USB Root Hub in Device Manager - you think this is the "Hub" that the upgrade documentation says will create the error?
I give up...
Thats it! Back to the Good ol T-Mobile v4 ROM.
I've done everything including downgrade my laptop to Win 98 to try USB 1 drivers for this WM 2003 SE upgrade.
I've read every research article, installed every patch, been through TechNet and MSDN libraries.
This thing will just not work!
The universe is trying to tell me something!!
usb and 98 is not the best match
some chipset require special drivers for usb to behave like via
with xp having the latest service pack is prob a good idear
Hi ,the problem is that when i connect the tab to the PC usb port(1.1 and 2.0),it does nothing.i have installed the mtp usb drivers and kies,sometimes the tablet is recognized under windows explorer as "portable device",but it's random and it's not predictable,it can be detected by windows 7 even after 30min or 1 hour.The tab is clockwork modded,actually i have flashed the latest stock rom honeycomb 3.2 build P7500XWKK4.I made a screenshot of the device manager when the tab was detected last time.I tried Debug USB enable/disable,doesn't work.Why this strange behaviour?
I also run x64 and do not experience any problems. You should try testing on a different computer to rule out any problems with the device.
I see,so i tried to connect the GT to my win7 notebook and also to my pc with a clean installation of win7 64 in a separate partition and still no luck.Meanwhile i'm using SwiFTP to transfer files to the device,hope to find a solution,maybe it's a broken/defective cable or 30pin usb port damaged
Yeah, seems like faulty usb port. Should send it back
Mine is Ok too, try to uninstall the Samsung Drivers, and Kies - if you have it installed - then reboot your computer all with the TAB disconnected from your PC.
try to perform a junk clean process for your PC.
Reinstall the Samsung Drivers, and TRY!
Win7 Pro x64 is my setup, working fine.
Don't quickly jump to the conclusion of "Defective USB Port" that's very Unlikely to occur on such pro equipment, me think!
solved
Guys I've changed the suspected faulty cable with a new one,now the TAB is recognised immediatly when plugged in,Odin works perfect now,it was hit'n'miss before.FINALLY!! now i can enjoy my teb(shame on you sammy)
Nice Bet that's a relieve
Yeah 2 weeks gettin' mad,i'm stressed now!i need some fun lol ,see you m8
I dont get a usb connection to my omnia 7
I tried it on 3 pcs 1 with 64bit 2 with 32bit and all usb ports
On all pcs I installed the usb driver
All pcs recognize my phone but the software gives this error:
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
anyone knows what i am doing wrong ?
regards chris
Hi,
I have exactly the same problem as chris1005, with an Omnia 7.
I strictly followed the instructions to install Magldr:
1) Installing Usb Samsung Drivers
2) Put my phone in download mode
3) Connect it to my pc
4) Launch "DMLI for Samsung V1"
And when i reach the "Connect" step, i get the "173" error (view attachment).
I run on a Win7 x64, my phone is developer unlock.
Thanks for the answers
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Hi,
Thanks for your response, but i tried this method, it doesn't work too, whether the usb on motherboard or the usb hub.
:/.
I don't know where this is blocking.
Is there any other solution to flash a rom on an Omnia 7 than the DFT solution ?
Thanks.
I flashed back from 7.8 to 7.5 and had the same problem again, but ater I rebooted my computer, it worked.
Try to follow this: http://windowsphonehacker.com/articles/tutorial_how_to_install_magldr_and_custom_roms_on_samsung_devices-02-08-12
NdotGdot said:
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Click to expand...
Click to collapse
I tried every usb port on my Pc still doesnt work
tried everything mentioned on xda dev about the problems with the magldr
regards chris
Hello!
I just started having issues with my android phone and the ability to select the USB connection type (Charge, MTP, PTP, etc...)
I was getting the notification fine 10 minutes ago. But now it doesnt appear anymore....
I might have something to do with this issue.
I was trying to move files over to the phone and the file transfer froze and wasnt responding on windows PC.
I unplugged the phone and the transfer screen went away, tried to plug it in again and windows listed it as an unknown device.
Both of my windows PCs are having this problem. The USB cord still works as I have tested it on other devices. I have tried enabling USB debug mode and that didn't help.
My phone boots, all the apps seem to be working fine.
I have a samsung 64 gb micro sd inserted into the phone and it it formatted for marshmallow. (currently using this ROM: [ROM][Lux][XT1563/2] ֍ Marshmallux ֍ Stock based rom 6.0 [MPD24.65-18])
Couldnt find another post about this issue so Any help would be super.
So i figured out its something to do with windows 10.
I plugged my phone into a windows 7 pc i have and it worked as it did before.
solved
A simple restart did the trick.
Wasn't sure why this would help since i was having the issue on two windows 10 devices.
This seems like a really small problem so moderators can choose to delete this if the post is redundant.
Hi guys,
I know this question has been asked before but I couldn't find anything that works.
My phone gets connected to my laptop but when I try to copy files to my phone memory/SD card this error is shown after a few seconds (some times more) of copping:
"the device has either stopped responding or is disconnected"
and after that nothing can be copied.
(Error sometimes appear even when starting the copy. also with some of ports windows doesn't detect the phone at all. )
any idea how it may be fixed?
Phone model: S7 edge, Android 7, Not rooted
Here is what I have tried so far:
-restarting the phone/laptop
-installing/reinstalling the drivers
-installing/using Samsung switch
-using different usb ports
-using different cables
-using different files
-different file sizes (23MB and 800 MB, 23 MB got copied once but not the second time)
-disabling usb selective suspending from windows power options
-disabling windows firewall
-keeping the screen on/unlocked all the time
-enabling usb debugging
-unmount SD card
-closing all the apps both from recent apps and cleaning ram
-turning wifi/mobile data off (I'm just really desperate to fine a solution!)
Is there anything else left to try?
Put your device in file transfer mode