Hi
There is this stock package for s5360 - S5360_XXLK1_OXFLK1_XXLH2. There is Polish language but there is no XEO. Can I use CSC from another ROM pack for example from this S5360_XXLH2_OXXLH2_XXLH2 ??
Why not try:
S5360_XXKL3_OXXKL1_XXKL3
European multilanguage build.
based on: S5360XXKL3_S5360OXXKL1_RST_S5360XXKL3_HOME.tar.md5
ro.build.date=Wed Dec 14 17:16:14 KST 2011
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contais any provider specific bloatware
I think pl is polish language and XEO is there also in this stock firmware.
Also Doky73 is converting and releasing new firmware updates at present, he just did Polish T-Mobile stock ROM today so maybe you can check Sammobile for new firmware for yourself and ask nicely if he will convert it? :angel:
I would like to use newest ROM. The newest is S5360_XXLK1_OXFLK1_XXLH2.
Is this CSC setting really important ?
jurasjo said:
I would like to use newest ROM. The newest is S5360_XXLK1_OXFLK1_XXLH2.
Is this CSC setting really important ?
Click to expand...
Click to collapse
I thought it was but apparently it is not so important at all. (See the Q&A Ask any questions thread). Just flash the latest firmware that you want which supports your language and you should be fine apart from having to set up your data network settings manually (APN settings). I have to do this anyway as my carrier is not major so I keep a list of the settings for when I change ROM, if you don't have those written down or cannot find them online get them from your phone before you do anything else.
Also, have you made a nandroid backup using CWM recovery yet? Always do this before making major changes, it could save you a lot of trouble if things go wrong! (I didn't and it caused me a lot of trouble lol). Also make a note of your IMEI number by pressing *#06# in dialer.
If when you have flashed the firmware you cannot connect to your carrier, then press *#272#(your IMEI number)# and it should fix it. If it doesn't (I am told this is very unlikely) then just flash the CSC file as you were asking about doing in your first post using Odin and it should all be good again.
I have been told that the CSC doesn't matter but have not had chance to test it myself yet as I only found out tonight!
Good luck :good:
Related
I have flashed my Note with the UK ROM LP4 and want to change my CSC code from the German CSC code ODT which I set after installing the German LPY ROM. But when I try using *#272*IME# then it just shows the ODT code with no other codes listed and no selection button for the ODT code.
Is there any way to fix this?
Thanks for all your help
I think the U.K. Rom you installed dude doesn't offer Multi CSC resource. You have to install a rom with Multi CSC resources.
Check Samfirmware and look for another U.K Rom you can flash and check later on if you can have the option of selecting ODT among the CSCs on that ROM.
letters_to_cleo said:
I think the U.K. Rom you installed dude doesn't offer Multi CSC resource. You have to install a rom with Multi CSC resources.
Check Samfirmware and look for another U.K Rom you can flash and check later on if you can have the option of selecting ODT among the CSCs on that ROM.
Click to expand...
Click to collapse
There is only one other UK rom on Samfirmware which is for the carphone warehouse but how do you know if it is Multi CSC? I don't want to select ODT but the UK CSC which I think is XEU
Thanks for your help.
hmm.. hey listen.. i read this before, try this step: downgrade your phone to a all stock GB , there are a lot of it in Dr ketan's thread http://forum.xda-developers.com/showthread.php?t=1424997. Choose the very basic stock one. After you flash to stock, check if there is ODT on that, if it does have it. Then your good to go. Flash and back to your official U.K Rom, I'm sure the Mutli CSC from the previous one is already there. By the way, you need to flash the Rom only.. not the corresponding CSC files of your new UK ROM..
letters_to_cleo said:
hmm.. hey listen.. i read this before, try this step: downgrade your phone to a all stock GB , there are a lot of it in Dr ketan's thread http://forum.xda-developers.com/showthread.php?t=1424997. Choose the very basic stock one. After you flash to stock, check if there is ODT on that, if it does have it. Then your good to go. Flash and back to your official U.K Rom, I'm sure the Mutli CSC from the previous one is already there. By the way, you need to flash the Rom only.. not the corresponding CSC files of your new UK ROM..
Click to expand...
Click to collapse
Thanks for your help I'm going to flash XXLC1 which is 2.36 and is called Open Europe so it should have the UK CSC code which I think is XEU. So I need to set that once LC1 is flashed then flash LP4 again. Correct? I notice in Samfirmware there are PDA and CSC files available. Can you just flash a CSC file? If so then there is no need to flash XXLC1 which is the PDA file.
When I flashed the UK LP4 rom I just flashed the PDA file. If I had also flashed the CSC file at the same time then perhaps I would be able to select the UK CSC code. As I have just flashed the PDA file can I now flash just the CSC file or do I need to start again and flash PDA and CSC together?
Sorry for all the questions, but I am a noob
I just checked it for myself and realised that only Korea CSC code is avaible to me after ICS Turkey version update. How can i revert to TUR CSC code which is for Turkey? I flash roms with mobile odin pro. Do you think it's something related to it ?
I managed to fix my CSC code problem by flashing the stock European GB rom XXKL8 which is multi-CSC. The other big advantage of the KL8 is that it does a full wipe which clears a lot of faults when you flash over other roms without a wipe.
With XXKL8 installed I was able to select the XUE CSC code for the UK and then flash the latest ICS stock rom for the UK. With the correct UK CSC code and correct UK rom I am now able to use kies or ota for future updates.
captainhakan said:
I just checked it for myself and realised that only Korea CSC code is avaible to me after ICS Turkey version update. How can i revert to TUR CSC code which is for Turkey? I flash roms with mobile odin pro. Do you think it's something related to it ?
Click to expand...
Click to collapse
It's nothing to do with Odin. You need to find a rom, probably a regional one which contains multiple CSC codes including your Turkey code. You might need to flash a GB rom first which does a full wipe if you have been flashing several non-wipe roms to clear any errors.
Once you are able to set the Turkey CSC using the regional Multi-CSC rom then you can flash the ICS rom for Turkey then you will have the correct CSC code and correct rom so you will be able to use kies for updates.
Hope this helps.
To be honest i don't remember which Gingerbread CSC code i was using before the ICS update and moreover i didn't directly flash ICS Turkey version over gingerbread. I first flashed ICS LPY German then i flashed ICS Turkey on it. Before that i only used German , Open Europe and Turkey roms. So i don't have a clue where did that Korean CSC come from even tho i never flashed a rom with Korean CSC. Thanks for the tip but i'm scared to downgrade to gingerbread for the famous emc bug hard brick problems. I can bare with korean csc for now as i never flash roms through kies.
captainhakan said:
To be honest i don't remember which Gingerbread CSC code i was using before the ICS update and moreover i didn't directly flash ICS Turkey version over gingerbread. I first flashed ICS LPY German then i flashed ICS Turkey on it. Before that i only used German , Open Europe and Turkey roms. So i don't have a clue where did that Korean CSC come from even tho i never flashed a rom with Korean CSC. Thanks for the tip but i'm scared to downgrade to gingerbread for the famous emc bug hard brick problems. I can bare with korean csc for now as i never flash roms through kies.
Click to expand...
Click to collapse
Flashing ROMS is never risk free. However flashing stock GB ROMS correctly using Odin appears to be reasonably safe. You can do a search for the correct CSC code for Turkey and change that but it will do a factory reset. If you don't have the CSC code which matches your ROM then you will not be able to update firmware using Kies.
Doesn't manual factory reset on a single-CSC ROM also change the CSC to that of the ROM...?
Hi, i can't change my CSC with *#272*imei#
I bought my phone in germany, and flash belgium Firmware (which is the country i live) but the CSC changed from DBT (Germany) to SEB (Baltic) how
bump
Usually to change the CSC you have to flash the new firmware (which you have done) but then also flash to change the CSC. - On previous Samsung's (Note 3) - you have to flash the firmware, wipe the device then insert your SIM and it changes to your region.
This *may* apply to the S5 also, but only way to actually tell would be to do it, extract the CSC info and flash it. If you're unsure how to do this, then I'd hold off for a little while until others have tested different methods or release a guide on how to change it.
Hi guys, I am currently CONFUSED reg. all the different versions reg. Samsung FWs (CSC, baseband, modem, BL, ...), therefore before I do anything stupid please advise :good:
My SGS 7 edge is currently the following (out of the box, not rooted):
Product code: SM2G935FZKAXEH
FW CSC: XEH (Hungary)
Active CSC: XEH
Available CSCs: BGL, CYO, MET, ORX, ROM, SEB, SEE, SIO, TWO, VIM, XEH, XEO
BL: G935FXXS1BPJ1
PDA: G935FXXS1BPJ1
CSC: G935FOXX1BPH1
Baseband: G935FXXU1BPHJ
I would now like to flash the following FW:
G935FXXU1BPJE_G935FATO1BPJ1_ATO - Open Austria
http://www.sammobile.com/firmwares/download/107392/G935FXXU1BPJE_G935FATO1BPJ1_ATO
Few questions now:
1) Will my CSC then change to ATO? As I think I've read is that Multi-CSCs (like my current one is) don't change, right?
2) Will the flash wipe my data or keep the data/apps?
3) Most important: Will OTA updates still work after the flash? I am confused as I've read that some codes which don't fit togetger will stop OTAs
Though I flashed a lot in my old Note 4 days, I never fully got the grasp on all these different versions and their true meanings :silly:
Your answers may be in this thread. Have you already had a look into there?
nitrous² said:
Your answers may be in this thread. Have you already had a look into there?
Click to expand...
Click to collapse
I am currently browsing there, thx for the link! Though it might be hard to find my answers in these 300 pages, so I'd be grateful if someone has the short answers :fingers-crossed:
MisterKanister said:
Hi guys, I am currently CONFUSED reg. all the different versions reg. Samsung FWs (CSC, baseband, modem, BL, ...), therefore before I do anything stupid please advise :good:
My SGS 7 edge is currently the following (out of the box, not rooted):
Product code: SM2G935FZKAXEH
FW CSC: XEH (Hungary)
Active CSC: XEH
Available CSCs: BGL, CYO, MET, ORX, ROM, SEB, SEE, SIO, TWO, VIM, XEH, XEO
BL: G935FXXS1BPJ1
PDA: G935FXXS1BPJ1
CSC: G935FOXX1BPH1
Baseband: G935FXXU1BPHJ
I would now like to flash the following FW:
G935FXXU1BPJE_G935FATO1BPJ1_ATO - Open Austria
http://www.sammobile.com/firmwares/download/107392/G935FXXU1BPJE_G935FATO1BPJ1_ATO
Few questions now:
1) Will my CSC then change to ATO? As I think I've read is that Multi-CSCs (like my current one is) don't change, right?
2) Will the flash wipe my data or keep the data/apps?
3) Most important: Will OTA updates still work after the flash? I am confused as I've read that some codes which don't fit togetger will stop OTAs
Though I flashed a lot in my old Note 4 days, I never fully got the grasp on all these different versions and their true meanings :silly:
Click to expand...
Click to collapse
1. I don't think your CSC changes with a ROM flash, just try it! You can get seperate CSC flashables anyway if it does change.
2. Always back everything up anyway! Then you won't have to worry.
3. Yes OTA still works for me and I am using Italian firmware, but using a UK device. (BTU) I only use Italian because when the note 7 gallery app came out, UK didn't have it yet but I'll switch back to UK soon lol
Shaolin36 said:
1. I don't think your CSC changes with a ROM flash, just try it! You can get seperate CSC flashables anyway if it does change.
2. Always back everything up anyway! Then you won't have to worry.
3. Yes OTA still works for me and I am using Italian firmware, but using a UK device. (BTU) I only use Italian because when the note 7 gallery app came out, UK didn't have it yet but I'll switch back to UK soon lol
Click to expand...
Click to collapse
Hi, thx for your answer!
1) Actually I'd like my CSC to change to ATO, but doesn't matter really if it stays or goes. Most important to me is that OTAs keep working after that, no matter which CSC. I would only flash the 1 piece Firmware file (AP), not the separate ones.
2) Sure will do using Smart Switch. That's the new KIES, right? lol
3) Ok that's the most important info for me: So it means, no matter which combination of FW and CSC you end up with, OTAs keep working?
1.Depend on what CSC you flash in odin
2.The flash will wipe the data if you flash CSC file. If you don't want data to be wiped, flash HOME_CSC file instead of CSC file.
3.OTA will only work reliably if all 4 files you flash in odin is from the same region.
Sent from my SM-G935F using Tapatalk
NonXtreme said:
1.Depend on what CSC you flash in odin
2.The flash will wipe the data if you flash CSC file. If you don't want data to be wiped, flash HOME_CSC file instead of CSC file.
3.OTA will only work reliably if all 4 files you flash in odin is from the same region.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
See, that's the part I am having troubles with.
Assuming I flash the ATO FW (1 piece AP only) and my CSC stays on XEH, no more OTAs?
Shaolin says that Italian firmware with UK device (BTU) works for him.
Hmmm. Maybe I better leave it as it is :silly:
Hey you guys. Maybe someone know how to go back to SEB region. Because always when I flash is XEO tried many times
Did you trie flasing SEB firmware from Sammobile? It should change you csc to SEB. If not try searching only the csc file. If you are rooted you can change it with an app or try a custom rom with multi csc
I tried to flash SEB firmware 100 times maybe same result XEO. Where to find original SEB CSC? I am not rooted. Dont want loose waranty.
dzeikasas said:
Hey you guys. Maybe someone know how to go back to SEB region. Because always when I flash is XEO tried many times
Click to expand...
Click to collapse
SEB (Baltic) and XEO (Poland) are part of a multi-CSC package (G935FOXX1BPH1). When installed, multi-CSC packages always default to a specific CSC out of all included CSCs (in this case XEO) and there is NO way to change that without root access. So you have three options, either trip KNOX and root so you can use SEB, or stay with XEO, or flash a firmware with a CSC that is not part of a multi-CSC package.
CSC codes list.
Thanks for answers. Well i think i will stay with XEO. I was in two services and they dont manage to restore SEB region. And what kind of lame for me, because it was Samsung service center and hall of them dont know what is CSC
Hallo!
My S7Edge is XFA (stuck on 6.0.1) and I have moved to Europe and currently live in Germany. I want to flash an unbranded European firmware and hope you can help with the following questions:
1. "Cleanest" Stock ROM (CSC)
Which of the following have the least amount of unwanted carrier or country specific apps?
• Switzerland (AUT)
• Nordics (NEE)
• Germany (DBT)
Just out of curiosity, are there some regions (CSC's) where stock ROMs do not include pre-installed apps like Whatsapp, Facebook, Word, Excel etc.?
Which of these is more likely to get future updates quicker?
2. Multi-CSC
I am going to download one of the ROMs with the SamFirm download tool.
Are these firmware files single or multi-CSC? For example if I download AUT, is only AUT included in the CSC file or can there be others?
I am asking, becuase when flashing, will I get the CSC of the ROM I downloaded or the first in a list of multi-CSC's?
Note that I am not going to root to change the CSC.