Database Users

AD SD Booting not working :(

Hello,
I have installed Magldr 1.3 + NANRDOID MDJ 2.6 ..
I am unable to go to the boot from ad sd option ... As in if i have to update any .zip file .. and I choose the option for ad sd boot .. it will get stuck in GO GO GO screen ..
Please help me ..
I have used task 29 and installed everything again ..
NOTE : I have installed a new sd card and updated the recover_250 file also.
Thanks ...

Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.

ClydeB1 said:
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
Click to expand...
Click to collapse
Thank you for the reply.
Yes i have installed the latest version1.3 only and I am talking about going into the option for BOOT AD SD .... I want to install another ROM ...
and when i click the BOOT AD SD option .. it will get stuck in the GO GO GO screen ...
I hope i am able to explain my situation ...

When i go to BOOT AD SD option in MAGLDR V1.13 .. it says ..
SD KERNEL OPEN FAILED

Its working now
Thank you

ajsam4u said:
Its working now
Thank you
Click to expand...
Click to collapse
how did you solve this problem because am having the same problems, pls help me out.

mikeysho said:
how did you solve this problem because am having the same problems, pls help me out.
Click to expand...
Click to collapse
If you are using magldr 1.13 with cwm 1.3 partitions you no longer go to Boot AD SD. To enter CWM you need to go to AD Recovery on magldr menu.

I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz

nummrt47 said:
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
Click to expand...
Click to collapse
This depends on what ROM you want to install using CWM. A large ROM like a Desire HD build requires more then a light ROM with only the essentials baked in. If you really aren't sure what to flash just check the guide accompanied with the ROM.

does this mean that I have to install CWM every time i want to install another ROM??

nummrt47 said:
does this mean that I have to install CWM every time i want to install another ROM??
Click to expand...
Click to collapse
Technically, no. Not unless the partition layouts for the different ROM's you are trying are different and in turn they require you to run DAF (which re-partitions your NAND storage).
If they are the same then your partition layout won't be changed and your recovery partition, which is where CWM resides, won't be affected at all when switching ROM's.

but i could also install the biggest one(400) and everything would work because I can't have a too small partition???
could that work??

[Q] how to install TyphooN CyanogenMod 7 nand

can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how

You have to flash clockworkmod (short CWM).
With cwm you can flash zips to your nand and also make backups:
http://forum.xda-developers.com/showthread.php?t=987531
Code:
For MAGLDR 1.13, booting from NAND:
Download the file attached and named "magldr_recovery_3.0.2.5.zip"
Download a partition layout incl. recovery from [URL="http://forum.xda-developers.com/showthread.php?t=898913"]this thread[/URL] which fits your ROM you want to use best and unzip it into "C:\recovery" for example
Copy over "magldr_recovery.img" from inside the zip archive into this folder "C:\recovery", delete existing "recovery-raw.img" and rename "magldr_recovery_3.0.2.5.img" to "recovery-raw.img"
Flash the recovery and partition layout using "DAF.exe" as usual and described in the thread of raiderx or the ROM provider
Boot Recovery with menu point "8. AD Recovery"
You're done
Click to expand...
Click to collapse

fischerben said:
can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how
Click to expand...
Click to collapse
I take it u want to install TyphooN_CM7_v3.1.3 rom?...Then simply visit the ROM's thread for clear instructions on how to successfully flash it...Its quite straight-forward.
Clean Install MAGLDR:
1. Task 29 (Just for measure)
2. Flash Radio(2.15 Recommended if u haven't alrd done so)
3. MAGLDR 1.13
4. MAGLDR 130MB System/4MB Cache (ClockworkMod Recovery v3.0.2.4)
5. Install TyphooN CyanogenMod 7 .zip with CWM (boot in2 MAGLDR, select AD Recovery > Select Zip to install from SD card, Flash.)

i succeed install the rom. but now i am stuck on the Typhoon loading screen

fischerben said:
i succeed install the rom. but now i am stuck on the Typhoon loading screen
Click to expand...
Click to collapse
has it something to do with my kernel?

fischerben said:
has it something to do with my kernel?
Click to expand...
Click to collapse
You might have done something wrong along the way...Wat steps did take to flash the ROM? ...d kernel included in the ROM usually doesn't give problems as its been tested before release...did u flash another?

Yes i flashed hyperdroid and it worked, so i don't understand why it's getting stuck on boot with typhoon

Try the steps mentioned above by " voncrane " , make sure u do a task29 before everything and when u enter the recovery wipe full data / it should work if u follow the steps .

help
i cant find where the link to download typoon mod 7

[Q] Can someone help me... please..

I'm here with one week old HTC HD2 (TMOUS) unlocked version (from BestBuy). I bought this to install Android. But after reading/searching hours and hours about installing instructions, I'm kinda confused now. I can install but don't know which one to begin and what goes after... pretty much the order of installation.
Currently, I have,
Windows Mobile 6.5 stock ROM
RAM 567MB
Flash memory size 1024MB
ROM version 3.14.531.1(04666) WWE
Radio version 2.15.50.14 (do I need to reflash radio?)
Manila version 2.5.20181424.0
Do I need to re-flash Radio?
I prefer to install cLK bootloader after reading 'senior member T-Macgnolia's' tutorial. Can someone kindly tell me, what to install and in which order?
How do I find cLK versions of HD2 Android ROM's? Any suggestions for better ROM?

Hi!!!
I don't use clk, I prefer magldr, but this is a guide to use clk:
http://forum.xda-developers.com/showthread.php?t=901305
hope it'll help you, otherwise someone else can help you better than me.
Your radio version I think is correct, I use it too, like all other people I think...
You find clk version of HD2 rom's generally in first posts of thread about NAND rom in HD2 Android NAND Development:
http://forum.xda-developers.com/forumdisplay.php?f=928
Roms: if you want a Sense rom, this is the best in my hopinion, very fast and smooth for a sense rom:
http://forum.xda-developers.com/showthread.php?t=1250703
I actually use this, has some problems (bluetooth, camera) but I like it very very much...
Otherwise, if you prefer non-sense rom, this is the best in my hopinion:
http://forum.xda-developers.com/showthread.php?t=933951

Your radio is correct,but you should flash HSPL before you flash custom WM ROMS or android builds. Ensure you flash the correct version of HSPL for your TMOUS. And as for the better builds, you should try them out yourself.It really depends on what you want.Sense,CM7,MIUI,MAGLDR,CLK...

kawshigan said:
Your radio is correct,but you should flash HSPL before you flash custom WM ROMS or android builds. Ensure you flash the correct version of HSPL for your TMOUS. And as for the better builds, you should try them out yourself.It really depends on what you want.Sense,CM7,MIUI,MAGLDR,CLK...
Click to expand...
Click to collapse
your radio is right
u need hardspl
magldr 1.13
RECOVERY 3.0.2.4
AND THEN THE PYRAMID ROM.............BEST 1 AROUND BAR NONE

suloch said:
I'm here with one week old HTC HD2 (TMOUS) unlocked version (from BestBuy). I bought this to install Android. But after reading/searching hours and hours about installing instructions, I'm kinda confused now. I can install but don't know which one to begin and what goes after... pretty much the order of installation.
Currently, I have,
Windows Mobile 6.5 stock ROM
RAM 567MB
Flash memory size 1024MB
ROM version 3.14.531.1(04666) WWE
Radio version 2.15.50.14 (do I need to reflash radio?)
Manila version 2.5.20181424.0
Do I need to re-flash Radio?
I prefer to install cLK bootloader after reading 'senior member T-Macgnolia's' tutorial. Can someone kindly tell me, what to install and in which order?
How do I find cLK versions of HD2 Android ROM's? Any suggestions for better ROM?
Click to expand...
Click to collapse
Try reading the guides in the sitckies of the NAND Android forum, especially MSkip's tutorial on how to flash NAND Android with Clockwork Mod.
Your radio is correct.
Install HardSPL (HSPL) 2.08 first.
Then install MAGLDR (I would recommend this as it's easier than CLK from what I've read.)
Select your ROM (don't flash yet)
In the OP of the ROM there will be guides as to which CWM partition you need etc, just download the right partition size and flash it. One of the reasons I recommend MSkip's tutorial is that all of the files are at the bottom of the post.
Flash the ROM via CWM.
Seeing as in the OP you said you understand how to flash the things, you should understand that I hope. Good Luck.

Thanks Ty5982, I followed one guide and installed cyanogenmod 7 ROM. What I did was
HSPL 2.08
(didn't touch radio since it's correct)
MAGLDR Bootloader 1.13
ClockworkMod Recovery v1.3 (made v1.3 150MB partition)
then went to 8. AD Recovery and installed ROM on the SD card using ClockworkMod Recovery.
As you said now I'm really interested about PYRAMID ROM since it has SENSE. Can you please tell me where to start with now?
Do I have to remove 'ClockworkMod Recovery'? or do I need to install RECOVERY 2.4?

Nigeldg said:
Try reading the guides in the sitckies of the NAND Android forum, especially MSkip's tutorial on how to flash NAND Android with Clockwork Mod.
Your radio is correct.
Install HardSPL (HSPL) 2.08 first.
Then install MAGLDR (I would recommend this as it's easier than CLK from what I've read.)
Select your ROM (don't flash yet)
In the OP of the ROM there will be guides as to which CWM partition you need etc, just download the right partition size and flash it. One of the reasons I recommend MSkip's tutorial is that all of the files are at the bottom of the post.
Flash the ROM via CWM.
Seeing as in the OP you said you understand how to flash the things, you should understand that I hope. Good Luck.
Click to expand...
Click to collapse
Thanks for the input. I did my first ROM installation... whhooohhoo . Thanks for all the help you all give here.
Now I'm really interested about PYRAMID ROM. But installation instructions doesn't say anything about CWM partition and it talk about different tools (http://forum.xda-developers.com/showthread.php?t=1185087)
Can you please tell me how I can remove this ROM and install PYRAMID ROM. Where should I start?

explanation made easier
make sure u av recovery 3.0.2.4 extracted on ur pc
right click on flash file NOT FLASH CFG and open it
CHANGE THE NUMBERS SO IT LOOKS LIKE BELOW:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 180M
cache ya 5M
userdata ya|asize|hr allsize
ONCE DONE,CLICK SAVE,NOT SAVE AS AND EXIT THE BOX
reeboot ur phone and keep hold of the power button so the magldr menu appears
go to USB FLASHER and select it
plug ur phone into ur pc
you should see USB............USB
when u do,go to the recovery folder and RIGHT CLICK ON DAF and RUN AS ADMINISTRATOR and click continue or yes or allow,what ever ur pc says
let it do its thing,then it reboots itself.
THIS WILL REPLACE YOUR OLD RECOVERY AND STAY THERE UNTIL U FLASH ANOTHER RECOVERY IF U EVER DO
when it does,unplug the usb from ur phone,keep hold of the power button again,but this time select AD RECOVERY
then select wipe cache,wipe data-factory reset,then go back and select ADVANCED and wipe dalvik cache,then select PARTITION SD CARD, select 2048M then select 0M,takes about 5 min.
THIS WILL WIPE UR SD CARD,SO BACK ANYTHING UP U NEED
then put the rom on ur sd card
go to magldr menu AGAIN and select ad recovery but this time select install zip from sd card,then select choose zip from sd card,choose ur rom,should start with NDT if its the same as mine lol,takes 10 mins max..........then your all done.........
when it boots up and the setup wizard appears,DO NOT SET UP,NO GOOGLE ACCOUNT OR WIFI,JUST KEEP ON CLICKIN NEXT,NEXT,NEXT,then when the home screen appears finally lol go to ur apps and click on QUICKBOOT and choose reboot,this time,fill in everythin on ur setup wizard..........then when it goes to the home screen,leave it for a min,REBOOT FOR THE LAST TIME,then the rom should settle......hope u enjoy it as much as i do.........
SORRY FOR THE LONG LIST,BUT THERE ARE SO MANY PPL ON ERE THAT JUST GIVE U A LINK WHEN U ASK FOR HELP...........I AINT 1 OF THEM,let me no how u get on and i'll then help u to tweak it to the max to get the best performance lol
HOPE THIS HELPS...................FEEL FREE TO HIT THANX

Ty5982 said:
make sure u av recovery 3.0.2.4 extracted on ur pc
right click on flash file NOT FLASH CFG and open it
CHANGE THE NUMBERS SO IT LOOKS LIKE BELOW:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 180M
cache ya 5M
userdata ya|asize|hr allsize
ONCE DONE,CLICK SAVE,NOT SAVE AS AND EXIT THE BOX
reeboot ur phone and keep hold of the power button so the magldr menu
Click to expand...
Click to collapse
Thanks for the instructions (hit the button ) and I greatly appreciate it. When I change FLASH file, how important is that numbers and how it change the behavior of my ROM?
I'm asking because I saw your first reply and went to SENSE 3.0 PYRAMID V 6.0 ROM and installed it. But original thread instruct to change " system ya 160M " and yours 180M.
Some how I managed to install it and first it was okay but I noticed ROM is kind of slow and Wi-Fi didn't work.
Any help with that issue??? (anyway I'm gonna re-flash it with your instructions)

Boot problem or something

hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?

tsagas said:
hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?
Click to expand...
Click to collapse
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM

Have you Installed CWM recovery ?

Nigeldg said:
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM
Click to expand...
Click to collapse
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?

tsagas said:
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?
Click to expand...
Click to collapse
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version

tsagas said:
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version
Click to expand...
Click to collapse
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Dont worry man, once you install CWM, you will be able to install a NAND rom of your choice on the internal memory of your phone. The rom you install will have everything eg. kernels, scripts. Basically all you need to do is install CWM then install a rom of your choice. Here is a guide to do install clockworkmod(CWM)
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and here is how to install a rom using clockworkmod
1. turn off you phone
2. turn it on while keeping the power button pressed (dont let go until you see the MAGLDR menu)
3. Go to option 8 "AD recovery"
4. You will boot into clockworkmod
5. Go to mounts and storage
6. Mount the sd card(connect your phone to the pc via usb cable, and then select this option)
7. Place your downloaded rom .zip file on the sd card, root level
8. unmount your fone.
9. Go to "install zip from sd card option"
10. then select "choose zip from sd card"
11. Select the rom.
12. The rom will be installed on your fones internal memory.
13. When it is done, just reboot your phone.
14. ENJOY
NOTE: Remember to choose the correct partition size when selecting which clockworkmod to install. there are 150mb, 250mb and 400mb partitions available. The procedure to install them is the same.
Hope it helps.
any questions
Give me a thanks if you found this post useful

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.

Nigeldg said:
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.
Click to expand...
Click to collapse
Installed CWM done everything right and i still got stuck on AD Recovery GO GO GO

http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money

tsagas said:
http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money
Click to expand...
Click to collapse
I genuinely cannot make it any simpler than this guide. When it says flash the correct partition size, use the HD2 NAND Toolkit to flash a 175mb partition.

Every single rom stuck at its logo.

Hey guys, i got here a hd2 with HSPL 2.08, aMAGLDR V1.13 build: 1st feb. 2011 and CWM Recovery v3.0.0.5. The problem is - few hours ago i had some old android version, so i decided to upgrade. I downloaded a few rom's and none of them worked. The version of the old android was 2(point) something, gingerbread. I tryed to install : touchwiz, Slimroms_LeoV7.2, Sea_JB V.2B, NexusHD2-JellyBean-CM10.1_V2.3 and one more Jelly Bean. None of them worked! Every single one of them got stuck by the logo of the rom. What am i doing wrong? Please help me, guys!

What model hd2 do you have?(us or EU)
What system partition size did you use??
What type of install, nand, dataonext or nativesd?
Sent from my NexusHD2 using xda premium

shanman-2 said:
What model hd2 do you have?(us or EU)
What system partition size did you use??
What type of install, nand, dataonext or nativesd?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
The EU model. (i'm not sure i understood your second question right) My memory stick is FAT32 partition, 8GB, idk wich class. And i'm trying to install the Nand version. I'm sorry for not writing those stuff earlyer.

feherneoh said:
You most probably need to reflash recovery with a new partition table, because the old system partition is too small. For EU model I suggest you to use DataOnExt instead of NAND, but you will have to repartition your card.
Click to expand...
Click to collapse
Is there any guid for that? I'm not sure what i have to search for, because i don't really understand what i have to do. Can you help out? Sorry for my stupid questions, guys!

There you go: http://forum.xda-developers.com/showthread.php?t=1044830

Well, i did this http://forum.xda-developers.com/showthread.php?t=1044830 (1. FLASH CLOCKWORK MOD TO YOUR DEVICE) and when i finished i had no CWM? I went to AD Recovery and it said no boot sources?? I did something wrong, didn't i? I used daf.exe from here - http://forum.xda-developers.com/showthread.php?t=893620 ..
Edit - I turned my phone on and i had - [30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM What the freak? But no CWM?
Edit 2 - yeah, i didn't knew there was a way to install android trough DFT.. Well, okay, but how do am i supposed to get my CWM back and install a Jelly Bean version on my phone?

denitos said:
Well, i did this http://forum.xda-developers.com/showthread.php?t=1044830 (1. FLASH CLOCKWORK MOD TO YOUR DEVICE) and when i finished i had no CWM? I went to AD Recovery and it said no boot sources?? I did something wrong, didn't i? I used daf.exe from here - http://forum.xda-developers.com/showthread.php?t=893620 ..
Edit - I turned my phone on and i had - [30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM What the freak? But no CWM?
Click to expand...
Click to collapse
That daf you used is not a CWM, that's a ROM that doesn't require clockworkmod. Just use the NAND Toolkit and flash CWM from there.

Thank you! I'm installing it now. I'm fallowing the guid of this video - Install NativeSD Rom's with 4ExtRecovery HTC HD2 4.2.2 Jellybean or ICS FIXED
Everything seems to be perfect by now, i'm istalling the ROM and we'll see what happens next (i'll edit this message if nobody writes after me).
Thanks for the help, guys!
Edit - Done! Everything seems to be ok, i just tested it out, it's a lottle laggy, but still - it works! Thank you, guys again!