On my LG Full HD 1080p 37" TV, the mirrored display from my Nexus 10 to the TV is always coming out with black edges roung the screen ie not being displayed in full screen. The only options in terms of aspect ratio for the TV are 4:3 or 16:9 when connected to the tablet. The Zoom1 and Zoom 2 options can only be accessed when viewing normal TV or DVDs. Is there a way I can fill up the black edges on the TV with what's being displayed from the tablet? The only way i get full screen is when i watch videos from Google Play Movies. I would live to stream videos from XBMC in full screen mode if possible. Thanks. The info displayed when the OK button on my TV's remote is being pressed shows 1920*1080 @60Hz when Tablet is connected to TV via HDMI
nasimdejai said:
On my LG Full HD 1080p 37" TV, the mirrored display from my Nexus 10 to the TV is always coming out with black edges roung the screen ie not being displayed in full screen. The only options in terms of aspect ratio for the TV are 4:3 or 16:9 when connected to the tablet. The Zoom1 and Zoom 2 options can only be accessed when viewing normal TV or DVDs. Is there a way I can fill up the black edges on the TV with what's being displayed from the tablet? The only way i get full screen is when i watch videos from Google Play Movies. I would live to stream videos from XBMC in full screen mode if possible. Thanks. The info displayed when the OK button on my TV's remote is being pressed shows 1920*1080 @60Hz when Tablet is connected to TV via HDMI
Click to expand...
Click to collapse
2650 / 1600 = 1.60
1920 / 1080 = 16 / 9 = 1.78
So I'm guessing that the screen fills top-to-bottom, but you have blank edges on the left and right? If you zoom, you're going to be losing some of what's on the top and bottom edges, just to fill the left and right ones.
nasimdejai said:
On my LG Full HD 1080p 37" TV, the mirrored display from my Nexus 10 to the TV is always coming out with black edges roung the screen ie not being displayed in full screen. The only options in terms of aspect ratio for the TV are 4:3 or 16:9 when connected to the tablet. The Zoom1 and Zoom 2 options can only be accessed when viewing normal TV or DVDs. Is there a way I can fill up the black edges on the TV with what's being displayed from the tablet? The only way i get full screen is when i watch videos from Google Play Movies. I would live to stream videos from XBMC in full screen mode if possible. Thanks. The info displayed when the OK button on my TV's remote is being pressed shows 1920*1080 @60Hz when Tablet is connected to TV via HDMI
Click to expand...
Click to collapse
It really does depend on your TV. I have a toshiba 1080p 50 inch and I can either have some of the screen cut off or have black bars. Some tvs have scale to fit when you plug in something externally.
stev067 said:
2650 / 1600 = 1.60
1920 / 1080 = 16 / 9 = 1.78
So I'm guessing that the screen fills top-to-bottom, but you have blank edges on the left and right? If you zoom, you're going to be losing some of what's on the top and bottom edges, just to fill the left and right ones.
Click to expand...
Click to collapse
Nope all 4 sides have the blank black bars ie none of the sides are filled and my TV does not have the option to zoom in or out.I'm just stuck with the 16:9 aspect ratio.
Sent from my Galaxy Nexus using Tapatalk
tyhe314 said:
It really does depend on your TV. I have a toshiba 1080p 50 inch and I can either have some of the screen cut off or have black bars. Some tvs have scale to fit when you plug in something externally.
Click to expand...
Click to collapse
I bought my TV in 2007. Could this have anything to do with the age and model of the TV. Remember I mentioned in the earlier post that it was a 1080p Full HDTV by LG and it still works well. I use to and still have an Acer A500 tablet and when connected to the same TV via the same HDMI cable,it mirrors the display perfectly without any bars round the edges. So,I was surprised when I got a different outcome with a much powerful tablet. Must be the Nexus 10 not playing well with the TV then.
Sent from my Galaxy Nexus using Tapatalk
nasimdejai said:
I bought my TV in 2007. Could this have anything to do with the age and model of the TV. Remember I mentioned in the earlier post that it was a 1080p Full HDTV by LG and it still works well. I use to and still have an Acer A500 tablet and when connected to the same TV via the same HDMI cable,it mirrors the display perfectly without any bars round the edges. So,I was surprised when I got a different outcome with a much powerful tablet. Must be the Nexus 10 not playing well with the TV then.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
That's a shame, I tested my N10 once with my 1920x1080 samsung TV and it worked fine. You might try contacting customer service at LG if you're really determined to get answers.
stev067 said:
That's a shame, I tested my N10 once with my 1920x1080 samsung TV and it worked fine. You might try contacting customer service at LG if you're really determined to get answers.
Click to expand...
Click to collapse
Cheers. I might do just that. But if it works with the 10.1" Acer A500, I should see no reason for the N10 not to. Its just a weird situation. I'll continue to rock the Acer as a set top box device to my TV while the N10 would remain a hand held instead.
Sent from my Nexus 10 using Tapatalk
How did you mirror your tablet to your TV? I have been trying that with my Samsung smart TV 60" but no luck
Sent from my HTC One X using xda app-developers app
lakhichana said:
How did you mirror your tablet to your TV? I have been trying that with my Samsung smart TV 60" but no luck
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I use an micro HDMI connector from my devices to the tv
Sent from my Galaxy Nexus using Tapatalk
i able to mirror the tablet to dtv fine(with 1080p output + fit to screen settings)
only concern is moving at the homescreen is a bit choppy but watching movie is fine. also why youtube doesn't allow full screen?grr
I do not have a micro HDMI cable to test it with, but with all normal hdmi inputs on both my 32" and 42" LG screen, regardless of source, i have the option of aspect ratios, zoom 1 and 2, and then the one which for me is most important, "just scan". Some sources will be larger than the screen, or smaller, and as such cut off, or black bars, but with Just Scan it does it's magic and is scaled to the size of the lcd.
hihihehe said:
i able to mirror the tablet to dtv fine(with 1080p output + fit to screen settings)
only concern is moving at the homescreen is a bit choppy but watching movie is fine. also why youtube doesn't allow full screen?grr
Click to expand...
Click to collapse
For youtube Go fullscreen on tablet and then connect to tv..works this way for me, hope this helps
Sent from my Nexus 10 using xda app-developers app
Related
Just interested in the hdmi docks and if they will do 1080p .. either mkv or avi?.. also how the hdmi does netflix .. in hd(if available)?..at least 720p?
any experiences would be nice to hear.
thanks
Any dock or adapter will do 1080p output, BUT it will be 1080p if you play\stream video through any video player (Dice etc.) if you just stream interface of android (includes web pages, pictures etc.) it will have 720p resolution, the reason for that is that Android's UI runs at 720p max. at the moment. Regarding Netflix - I have no idea, I don't have, though I suppose it will not be higher than 720p, like Youtube app HD mode.
Netflix quality is awful at the moment on the tab as it is, on a larger screen it'd be useless
Sent from my HTC Desire S using Tapatalk 2
BAD_BOY_KIEV said:
it will have 720p resolution, the reason for that is that Android's UI runs at 720p max. at the moment.
Click to expand...
Click to collapse
Correction: 800p
The output resolution is 1280x800, not 1280x720.
Some TV's may crop 40 pixels from the top and the bottom (because most TV's are in 16:9 ratio as opposed to the 16:10 ratio of the 7.7), but when connecting to my computer monitor (which is a 16:10 ratio screen at 1680x1050), I can see the entire image with no cropping. Even the display properties indicates that the input signal is 1280x800.
Just, y'know, FYI...
And I know this was mentioned, but in response to the OP, yes the 7.7 does do 1080p, provided that the video being played back is utilizing hardware acceleration for the playback, otherwise it is downscaled to 1280x800 (like in YouTube, or Netflix, etc.)
I have a TV cable for galaxy tab 7, u think is the same for 7.7 tab?
Manuele83 said:
I have a TV cable for galaxy tab 7, u think is the same for 7.7 tab?
Click to expand...
Click to collapse
If you're referring to the composite video adapter for the 3.5mm headphone jack, then no, that will not work with the 7.7. The 7.7 only works with the HDMI adapter.
Fyo the netflix app was just updated, no better but not hd yet
Sent from my GT-P6800 using Tapatalk 2
HDMI output. The hdmi output on the nexus should output 1080p right? I only seem to be getting 720p but I was wondering if it was just my hdmi cable since it is old and came with a Motorola Atrix 2.
cavallino33 said:
HDMI output. The hdmi output on the nexus should output 1080p right? I only seem to be getting 720p but I was wondering if it was just my hdmi cable since it is old and came with a Motorola Atrix 2.
Click to expand...
Click to collapse
Very likely and that also depends on your tv
Sent from my GT-N7100 using Tapatalk 2
edwinpang said:
Very likely and that also depends on your tv
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Hi from what I am reading the nx10 HDMI out is only mirror image that will not fill the HDTV format. Is this a hardware issue on nexus 10 end or can it be corrected in a software update..? I would actually buy and rent movies with Google play if I can watch them full screen on my TV.
If Google fixes this issue I see more people utilizing their movie service.
Till then I am using Microsoft Xbox.
Thanks...joe
When I connect my N10 to my plasma TV it reports 1080p which is the maximum this TV supports so I think it's device dependent based on the max of either the TV or tablet but given the resolution of the N10 the TV is likely to be the limit.
Sent from my Nexus 10 using XDA Premium HD app
voodooevil said:
Hi from what I am reading the nx10 HDMI out is only mirror image that will not fill the HDTV format. Is this a hardware issue on nexus 10 end or can it be corrected in a software update..? I would actually buy and rent movies with Google play if I can watch them full screen on my TV.
If Google fixes this issue I see more people utilizing their movie service.
Till then I am using Microsoft Xbox.
Thanks...joe
Click to expand...
Click to collapse
If you watch movies it does automatically fill the entire screen. It also switches to a slightly different mirroring mode where it doesn't technically mirror.
Games etc. don't fill the entire screen though. Neither does the launcher etc.
1080p
Also confirmed 1080p output to TV from my nexus 10, with a HDMI cable that is a few years old from when I picked up a droid charge a couple of years ago.
---------- Post added at 10:07 AM ---------- Previous post was at 09:57 AM ----------
gogorman said:
If you watch movies it does automatically fill the entire screen. It also switches to a slightly different mirroring mode where it doesn't technically mirror.
Games etc. don't fill the entire screen though. Neither does the launcher etc.
Click to expand...
Click to collapse
It will fill my entire screen, and has same behavior not mirroring during movie playback. Other apps like mx player mirror during playback. Launcher did when in landscape mode but not in portrait.
BrandedDays said:
Also confirmed 1080p output to TV from my nexus 10, with a HDMI cable that is a few years old from when I picked up a droid charge a couple of years ago.
---------- Post added at 10:07 AM ---------- Previous post was at 09:57 AM ----------
It will fill my entire screen, and has same behavior not mirroring during movie playback. Other apps like mx player mirror during playback. Launcher did when in landscape mode but not in portrait.
Click to expand...
Click to collapse
I am not sure why I dont get full screenI use a a cable that supports 1080P AND I have to use a hdmi switch because my tv only has 3 inputs and I needed a 4th. When I play the movie trailer in play store it does not widen the screen. I still have black bands on sides like I do when nexus mirrors image. My tv supports 1080p. Is a sony xbr2 40". A little old but if my bluray player is fine why not nexus.
Thanks..joe
This is what I am getting and hope there is some sort of fix
https://www.youtube.com/watch?v=gkXj8QquyGc&feature=youtube_gdata_player
Thanks
On my LG Full HD 1080p 37" TV, the mirrored display from my Nexus 10 to the TV is always coming out with black edges roung the screen ie not being displayed in full screen. The only options in terms of aspect ratio for the TV are 4:3 or 16:9 when connected to the tablet. The Zoom1 and Zoom 2 options can only be accessed when viewing normal TV or DVDs. Is there a way I can fill up the black edges on the TV with what's being displayed from the tablet? The only way i get full screen is when i watch videos from Google Play Movies. I would live to stream videos from XBMC in full screen mode if possible. Thanks. The info displayed when the OK button on my TV's remote is being pressed shows 1920*1080 @60Hz when Tablet is connected to TV via HDMI
cavallino33 said:
HDMI output. The hdmi output on the nexus should output 1080p right? I only seem to be getting 720p but I was wondering if it was just my hdmi cable since it is old and came with a Motorola Atrix 2.
Click to expand...
Click to collapse
Doing some research on the micro-hdmi I came across some Info about the cable. Standard cable supports up to 720p/1080i, High-speed data micro-hdmi will support 1080p, 4k, 3d and high color. Source = http://en.m.wikipedia.org/wiki/Micro-HDMI
has the 4.3 ota update fixed the non full screen 'issue' when connecting nexus 10 to tv via hdmi? (is it full screen now when connected?)
I've been wondering this too... No definite answer yet... I'm gonna assume that they didn't fix it
can anyone answer this?
no one knows?
will try this weekend, i keep forgetting to. my bad
Still not fixed.
I used HDMI yesterday's evening to watch my photos on TV and it was still with black stripes on the sides.
is this fixed on kitkat?
I think this depends on your phone and your TV. If ur TV's resolution is 1080p (full HD) but ur phone
is 720p (HD ready) u won't be to have full screen on your TV.
Sent from a small country called Singapore.
Phone: N7105 powered by Illusion ROM 2.6
Kernel: Plasma v2.02
Click thanks if I helped!
Irwenzhao said:
I think this depends on your phone and your TV. If ur TV's resolution is 1080p (full HD) but ur phone
is 720p (HD ready) u won't be to have full screen on your TV.
Sent from a small country called Singapore.
Phone: N7105 powered by Illusion ROM 2.6
Kernel: Plasma v2.02
Click thanks if I helped!
Click to expand...
Click to collapse
Not true mate, this is an aspect ratio issue, if you device matches the aspect ratio of you two you wont get any black lines. However android pre 4.2 used to output at 16:9 correctly to TVs regardless of your devices main screen aspect ratio, now they mirror the devices screen ratio which is monumentally idiotic.
my proscan TV can go up to 1080i and 720p...but when plug in my nexus it only do 480p. looks horrible and TV said it get only 480. no setting on TV... I think the TV display whatever it get and no setting on tablet either. what give? spec for my HDMI cable is can do 1080p. it does display the whole screen on the tv. but HD TV displaying 480 with huge pixel is horrible. look like really low res Mario game.
workerantDroid said:
my proscan TV can go up to 1080i and 720p...but when plug in my nexus it only do 480p. looks horrible and TV said it get only 480. no setting on TV... I think the TV display whatever it get and no setting on tablet either. what give? spec for my HDMI cable is can do 1080p. it does display the whole screen on the tv. but HD TV displaying 480 with huge pixel is horrible. look like really low res Mario game.
Click to expand...
Click to collapse
have you checked you HDMI output in settings, is it set to 1080p?
da.trute said:
have you checked you HDMI output in settings, is it set to 1080p?
Click to expand...
Click to collapse
thanks for the reply... I check all over for this HDMI setting and even check it while the TV is plug in. The HDMI works cause I can see it display on the screen. While the TV still displaying what's on the tablet, I still can't find this HDMI setting. I could tell it lag a little with the TV.
I'm gonna try it on a friend's TV when I get the chance. See if it does the same.
I get sidebars on the 1080p output setting. I don't think the wireless dongle supports any higher resolution, and I don't have a 4k display to test, even if it did.
Sent from my SM-P900 using Tapatalk
Change on yours TV to fit and not 16:9 mode.
What is a samsung wireless hdmi device ? Do you mean dlna ?
Buji said:
I get sidebars on the 1080p output setting. I don't think the wireless dongle supports any higher resolution, and I don't have a 4k display to test, even if it did.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
jake21 said:
What is a samsung wireless hdmi device ? Do you mean dlna ?
Click to expand...
Click to collapse
Samsung makes a wireless HDMI device for their newer devices. It is a miracast reciever, they call it an allshare adapter.
http://www.google.com/aclk?sa=L&ai=...%2Flike%2F121265221457%3Flpid%3D82&adtype=pla
Sent from my SM-P900 using Tapatalk
dt33 said:
Change on yours TV to fit and not 16:9 mode.
Click to expand...
Click to collapse
Yeah, the problem isn't the TV's scaling, it is adding blank information to the sides at the device level. The allshare adapter handshakes with a full 1080p signal that fills the 1:1 pixel mapping mode of my (Samsung) tv perfectly. My galaxy s4 through the same adapter sends along a properly formatted signal.
Since the native 2560x1600 resolution breaks down to a 16x10 ratio instead of the standard 1080p standard of 16x9, it can either add the bars, rescale the image [introducing a subtle geometric squash) or zoom the image and chop the top and bottom of the signal. Since zooming the image would result is lost information, and rescaling is pretty processor intensive I can see why they chose the route to add the sidebars.
My Samsung tv, which is only a few years old, doesn't have a zoom mode that doesn't also cut off some of the picture image, and since the black bars are part of the 1080p signal, it is technically displaying the picture correctly.
Sent from my SM-P900 using Tapatalk
Buji said:
Yeah, the problem isn't the TV's scaling, it is adding blank information to the sides at the device level. The allshare adapter handshakes with a full 1080p signal that fills the 1:1 pixel mapping mode of my (Samsung) tv perfectly. My galaxy s4 through the same adapter sends along a properly formatted signal.
Since the native 2560x1600 resolution breaks down to a 16x10 ratio instead of the standard 1080p standard of 16x9, it can either add the bars, rescale the image [introducing a subtle geometric squash) or zoom the image and chop the top and bottom of the signal. Since zooming the image would result is lost information, and rescaling is pretty processor intensive I can see why they chose the route to add the sidebars.
My Samsung tv, which is only a few years old, doesn't have a zoom mode that doesn't also cut off some of the picture image, and since the black bars are part of the 1080p signal, it is technically displaying the picture correctly.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
You are correct, mine WiFi dongle arrived yesterday and I also got black borders when using screen mirroring and it works fine with MHL 2.0 adapter. So no idea why its black borders with WiFi.
The 2012 note 10.1 did the same thing. Good to know the MHL adapter works, mine is broken and I haven't replaced it yet.
Sent from my SM-P900 using Tapatalk
Buji said:
I get sidebars on the 1080p output setting. I don't think the wireless dongle supports any higher resolution, and I don't have a 4k display to test, even if it did.
Click to expand...
Click to collapse
Outputting from my N10.1-14 (same screen resolution as the N12) to a '13 Samsung SmartTV via AllShare Cast...
1080P MKV file...
720P Google Play Movie...
Plain old screen mirroring...
It's a little tough to see, but it looks like the 10.1 2014 does NOT have this problem? That is interesting!
Sent from my SM-P900 using Tapatalk
Got one of those m-hdmi to normal HDMI adapters, it works great but I was wondering if the tn7 can out put higher than the 1280x800 the notes screen is to the TV? Or does it just detect and output the highest Res any way? Also does anyone know how to make the image fit the whole screen? I've got bars on the sides and top/bottom. First time I've used a tabs HDMI out =/
Sent from my TegraNote-P1640 using XDA Premium HD app
foxorroxors said:
Got one of those m-hdmi to normal HDMI adapters, it works great but I was wondering if the tn7 can out put higher than the 1280x800 the notes screen is to the TV? Or does it just detect and output the highest Res any way? Also does anyone know how to make the image fit the whole screen? I've got bars on the sides and top/bottom. First time I've used a tabs HDMI out =/
Sent from my TegraNote-P1640 using XDA Premium HD app
Click to expand...
Click to collapse
At the moment, you'll only get 1080p output if you watch a 1080p video. I was really hoping they were going to add Console Mode with full 1080p output with the 4.4 update, but alas... nope!
As for the image not fitting the TV, the tablet's display is actually 16:10 at 1280x800 and not 16:9 at 1280x720, so the image doesn't quite fit. It's kinda stupid since even my old Acer A500 tablet had a 16:10 screen but adjusted the output to fit 16:9. Long story short, though, is that it is what it is, and there's not really anything that can be done besides hoping and waiting for Nvidia to iron it out (or for a dev to fix it with a custom ROM some day).
foxorroxors said:
Got one of those m-hdmi to normal HDMI adapters, it works great but I was wondering if the tn7 can out put higher than the 1280x800 the notes screen is to the TV? Or does it just detect and output the highest Res any way? Also does anyone know how to make the image fit the whole screen? I've got bars on the sides and top/bottom. First time I've used a tabs HDMI out =/
Sent from my TegraNote-P1640 using XDA Premium HD app
Click to expand...
Click to collapse
If you don't want the bars on either side of the screen, you need to roll back to the original 4.2.2 firmware. Using that firmware, if you use a movie player like MX Player, when a film is playing, pinch to 'zoom' in on the film. As you do so the the edge of the film will disappear off the edge of the tablet's screen, but it will zoom in to fit the edges of the TV's screen, if you see what I mean. You will also find playback under 4.2 much smoother, whereas now you may experience micro stutters as though the movie is dropping frames or running at less than 24fps. If you search for Tegra Note Connectivity you'll find a thread I made with more info. http://forum.xda-developers.com/showthread.php?t=2566828
Sadly 4.3 and 4.4 broke this rather cool zooming feature.
B