Hi is it possible to switch the wifi in monitor or injection mode?
Is it possible to change the mac of the wifi card?
I tried CM6 + Debian Testing, macchanger show it changed the mac but the router shows the old mac.
Maybe with a patched Kernel...
Hi is it possible to switch the wifi in monitor or injection mode?
Is it possible to change the mac of the wifi card?
I tried CM6 + Debian Testing, macchanger show it changed the mac but the router shows the old mac.
Maybe with a patched Kernel...
If not please tell me on wich device you got one of this working and how ;-)
that needs a custom firmware, i haven't seen anyone on it
I currently am using cm9 ics jackpotclavins latest build on my kindle fire. apparently this builds wpa_supplicant file does not support adhoc. I tried everything I could think of replacing wpa_supplicant from cm7 build to cm9 no go tried a few different modifications of wpa_supplicant online did not work, ics build uses wpa supplicant 0.6.10. I even tried a patch online. I love using my tablet at work using the wifi from my smartphone. I cannot do this one ice cream sandwich, but do not want to give that up just because of this feature. Is there a work around that anyone knows of to get adhoc on kindle fire ics?
What kind of phone are you using I have tethered mine with a LG, HTC, and a Samsung, With no problems.
What app are you using to tether with?
Had the same problem. Install "ZT-180 Adhoc Switcher", works OK for me!
I did install zt-180 adhoc switcher and it doesnt do jack just forces close. Im using his latest build with the video fix. I tether with a droidx with the latest 2nd init rom of miui. using wifi tether. My computer can connect to the adhoc network so i know the network is up and running. if you guys have no problems I dont know what else to do any suggestions?
just an update I read online of people having their droidx in infrastructure mode aka softap, not adhoc, I've tried also to get wireless tether in infrastructure but in any version i try it goes to adhoc is intrastructure mode possible with droidx?
you don't need any app for infrastructure mode - that's the mode wifi normally works on every access point
Try Wifi Tether and enable MSS clamping and Routing fix in the settings and see if that works.
Same Problem
I tried this with my ICS Kindle fire and it did not work i also tried ZT 180 Ad Hoc Tethering Switch and it just keeps force closing
so I found the culprit for infrastructure mode any gb based miui rom will not support infrastructure mode. you must use a cyanogen mod 7 or froyo miui, i can confirm a cyanogen mod 7 will enable infrastructure mode for the droidx. right now atm i still use atm as my daily drive and whenever i want to use my kindle fire away from the house and there is any unsecured wifi around I use boot manager to boot into cyanogenmod 7 to enable the infrastructure mode not adhoc
Maybe, i'm on rooted stock (6.2.1) and, as i told, zt-180 works ok for me
OK.. my knowledge of Tablets and rooting are limited.
I have an ACER A500 and my current android system is 3.0.1. I am rooted with clockwork MOD... No Custom ROM as of yet.
I have a Samsung Galaxy SII (Epic Touch from sprint), which is also rooted... no custom ROM
All I want to do is have my Tablet connect to my phones hotspot... does my tablet need the ADHOC fix/patch to do this?
I downloaded the wifi tether app for my phone and the tablet was UNABLE to see it, however my tablet can see, connect and use my wifi network at home.
Not sure if this is a questions for the Samsung Forum or ACER. I did a few searches for "Adhoc" and "what is adhoc" to get a better understanding of what it is... So far i can only come up with that its one of two methods of wifi networking.
What is needed to allow my A500 to connect to my cell phones wifi tether ?? I wasnt sure if i needed to download a ROM that had ADHOC integrated in it or not.
First off: A WiFi Adhoc network is basically a normal WiFi network, only it doesn't use a dedicated AP (like those WiFi router & AP devices you'll normaly use to create a network), but the WiFi network adaptor of a computer (or tablet, or cellphone).
In your case, the AP is the cellphone, so it will need some kind of software to switch its WiFi adaptor into AP mode. Your tab can then connect normally to the AP, no patches needed. The reverse way (only interesting to A501 users, as we have 3g / 4g network) is best done with the patch you mentioned, as this gives us the settings Acer removed back (they left the entire WiFi stack untouched, but removed access to the tethering settings).
As for switching your Phone's WiFi to AP mode: It may be that Samsung left the neccessary parts in their Android distribution. In this case you can activate it under settings -> Wireless and Networks -> tethering & portable hotspot. If they didn't, you can use apps like barnacle WiFi tether to achive the same effect... though encryption might be a problem if wpa_supplicant (the linux way of managing secure WiFi connections, which runs as a part of the WiFi stack) is missing.
Here is the file you need flash with cwm or ra as normal or follow these instructions.
1. navigate to system/bin and copy wpa_supplicant
2. past this to your sd card as a backup
3. rename wpa_supplicant to wpa_supplicant.old
4. extract the file from the download and past it into the system/bin folder. (should be wpa_supplicant)
4. Long press on the file once copied
6. select Permissions and set to User: RWE, Group & Others:RE only
again a big big thank you to the original poster/fixer the original thread is
http://forum.xda-developers.com/showthread.php?t=1056188
erica_renee said:
Here is the file you need flash with cwm or ra as normal or follow these instructions.
1. navigate to system/bin and copy wpa_supplicant
2. past this to your sd card as a backup
3. rename wpa_supplicant to wpa_supplicant.old
4. extract the file from the download and past it into the system/bin folder. (should be wpa_supplicant)
4. Long press on the file once copied
6. select Permissions and set to User: RWE, Group & Others:RE only
again a big big thank you to the original poster/fixer the original thread is
http://forum.xda-developers.com/showthread.php?t=1056188
Click to expand...
Click to collapse
Thank you, i'm going to try this, but I wonder if its my phone rather, not my tablet. Because My laptop can't see my phones wifi tether either. They make a patch for my phone..so I may try that first.
Sent from my SPH-D710 using Tapatalk
Anyone used the above app and has no problem with kindle?
Sent from my Kindle Fire
zt-180 adhoc switcher works on the kf
https://play.google.com/store/search?q=zt-180+adhoc&c=apps
By using this apk, it allows kindle to connect to an ad hoc network? Sorry for asking noob question, cause I am trying to connect my phone that only support ad hoc mode.
Sent from my Kindle Fire
All of the cm7 ROMs and most of the cm9 ROMs(Jackpot/hashcode's ROM and also NRG's ROM) have ad hoc wifi enabled. C'mon...What are you guys scared of? Rooting is waaaay harder than flashing and that's not saying much. I promise the devs on here make good sh*t. You won't be disappointed.
ataraxist said:
By using this apk, it allows kindle to connect to an ad hoc network? Sorry for asking noob question, cause I am trying to connect my phone that only support ad hoc mode.
Sent from my Kindle Fire
Click to expand...
Click to collapse
that's exactly what this program is supposed to do
i use it to connect to my laptop
i'm on stock 6.2.2
b63 said:
that's exactly what this program is supposed to do
i use it to connect to my laptop
i'm on stock 6.2.2
Click to expand...
Click to collapse
hi, can you upload the .apk file here for me, I dont have wifi to download it in the market, and googling shown no result... Thanks with regard!
http://bit.ly/H1ZoOb
Radon_22 said:
Click to expand...
Click to collapse
Thanks although I've got it already. Don't blame me because I've googled it by an hour with no result before asked here.
Now I've problem with launching both ZT 180 and Adhoc enabler.
ZT 180 report "the file which should be modified by the app are not presented at its expected location"..
Ad hoc enabler report "unable to write file system under read/write mode"
I'm using Kindle Fire stock rom 6.2.1, rooted, Busy Box installed.
Any idea for my problem.
allthrough i used it with 6.2.1 i don't know why you don't update to 6.2.2
this should correct any misssing files also
would recommend to use the nfx update for this:
http://forum.xda-developers.com/showthread.php?t=1452082
btw. what do you mean with "zt180 and adhoc enabler" ? - you only need zt180 on the kf - it enables adhoc mode
b63 said:
allthrough i used it with 6.2.1 i don't know why you don't update to 6.2.2
this should correct any misssing files also
would recommend to use the nfx update for this:
http://forum.xda-developers.com/showthread.php?t=1452082
btw. what do you mean with "zt180 and adhoc enabler" ? - you only need zt180 on the kf - it enables adhoc mode
Click to expand...
Click to collapse
I mean I use both "ZT 180 ad hoc switcher" and "ad hoc anabler" apps on my kf. And no one has worked...
the 1st report can't find the file to replace
the 2nd report can't open in read/write mode...
Now i gonna update to 6.2.2. Hope this works.
Thanks for the support so far.
FascistKId said:
I mean I use both "ZT 180 ad hoc switcher" and "ad hoc anabler" apps on my kf. And no one has worked...
the 1st report can't find the file to replace
the 2nd report can't open in read/write mode...
Now i gonna update to 6.2.2. Hope this works.
Thanks for the support so far.
Click to expand...
Click to collapse
somebody help me
never had that error message with zt-180
allready on stock rom 6.2.2 ?
permanent rooted with su & superuser.apk installed ?
zt-180 ver.1.4c ?
CodenameDeadpool said:
All of the cm7 ROMs and most of the cm9 ROMs(Jackpot/hashcode's ROM and also NRG's ROM) have ad hoc wifi enabled. C'mon...What are you guys scared of? Rooting is waaaay harder than flashing and that's not saying much. I promise the devs on here make good sh*t. You won't be disappointed.
Click to expand...
Click to collapse
Hey,
I've been trying to get the wifi to work with my ad hoc network after installing the Energy CM9 rom
It's said in the thread that adhoc wifi is supported, but I can't see nor connect to my adhoc network.
I'll try a CM7 rom to test. Meanwhile, any help would be greatly appreciated
Thx
Sorry for the stupid question, but what is the practical use for Kindle with adhoc wi-fi enabled. Internet connection tethering to the other device that has problems connecting directly? I am new in all this and now I have Kindle with ICS CM9 flashed - rom that supports adhoc wi-fi. So now I am just curious, does it do any good and how can I use it.
Hey!
braintrap said:
Sorry for the stupid question, but what is the practical use for Kindle with adhoc wi-fi enabled. Internet connection tethering to the other device that has problems connecting directly? I am new in all this and now I have Kindle with ICS CM9 flashed - rom that supports adhoc wi-fi. So now I am just curious, does it do any good and how can I use it.
Click to expand...
Click to collapse
It's not a question of better or worse network. Wifi networks can typically be configured in either Infrastructure or Adhoc mode.
In infrastructure, the network is centralized around an access point, which is in most cases a router. All the devices connect to this particular access point and all the data exchanged between the devices on this network will go through the access point. For example, if pc A wants to send data to pc B, it's going to be:
pc A ----> Access Point ----> pc B.
In adhoc, there is no central point for the network. The devices communicate directly with each other. For the same example as before, it would be:
pc A ----> pc B
The thing is, I receive internet through a 4G usb adapter plugged into my PC, and I configured my pc to share the internet connection over the wifi. Windows allows to do that quite easily, but my network card (or its driver, or Windows 7... I'm not sure who's at fault here...) only allows me to create an Adhoc network. So here I am, with my 4G usb adapter shared through an adhoc wifi network. It works great: 2 PCs and 2 phones can connect to the Adhoc wifi and receive internet through it without any problem.
However, I can't get my kindle fire to connect to it. I've tried several solutions and adhoc enablers... without success.
@braintrap: Can you give me a link to the rom you used if it works to connect to an adhoc network ?
And to answer your question "does it do any good and how can I use it." No! There is no advantages of using an adhoc network if your current wifi network works well. Just enjoy
Has anyone succeeded to connect to an adhoc with a Kindle Fire ? If yes, what rom was running (stock, CM7, CM9....) ?
Thanks for any help.
Hi...
I've tried with Hashcode's, Energy and AOKP Rom's and none of the see my iPhone's Personal Hotspot.
I'm really looking forward to sharing the iphone's data plan with the Kindle in order to use it for RSS Reading and browsing anywhere!!
Thanks,
Carlos
I use energy cm9 rom from here: http://forum.xda-developers.com/showthread.php?t=1528024
No success with adhoc network created on my MacBook but connects easily to the network shared by the Wildfire S...
Energy ROM just updated and sports adhoc network support.
Sent from my Amazon Kindle Fire using XDA