wifi monitor mode or macchanger - G2 and Desire Z General

Hi is it possible to switch the wifi in monitor or injection mode?
Is it possible to change the mac of the wifi card?
I tried CM6 + Debian Testing, macchanger show it changed the mac but the router shows the old mac.
Maybe with a patched Kernel...

Related

wifi promiscuous mode or macchanger for the HTC G2 / DZ

Hi is it possible to switch the wifi in monitor or injection mode?
Is it possible to change the mac of the wifi card?
I tried CM6 + Debian Testing, macchanger show it changed the mac but the router shows the old mac.
Maybe with a patched Kernel...
If not please tell me on wich device you got one of this working and how ;-)
that needs a custom firmware, i haven't seen anyone on it

how to enable wifi ad-hoc

Hi there. I try to enable wifi ad-hoc mode with change wpa_supplicant at the syste/bin folder. But ad-hoc still not working. Do you have any idea about how enable ad-hoc mode?

[Q] Wifi in monitor mode

Hello everybody.
Is here anyway I can use the Nexus 10 with wifi on monitor mode? I imagine it's difficult to do it with the wireless card it brings, so is there anyway I can use an external wifi dongle in monitor mode? I have the wn725n v2 dongle, the driver is rtl8188eu, is there anyway to put in the kernel and make it work in android? Or install an os with complete linux installer and make it work there? Thanks in advance.

Linux emulator does not recognise the WIFI chipset

Hi all,
I have recently installed kali linux on my android phone by mounting an .img file and using Vx connectbot to work through the terminal..
As for the monitor mode, I typed(as superuser):
# airmon-ng
The chipset column says: [Not PCI, not USB or sdio]
May be this is the reason I am unable to enter monitor mode.... Is there a way for the emulator to detect the wireless card??
I also tried installing apps like bcmon (which didnt work because of not being one of Broadcom chipsets) and few others..
Please find way to enable monitor mode... thanks in advance
Am using Yu Yureka... lollipop 5.1.1
hey for your information yu yureka has an qualcom wifi chipset,and that does not support monitor mode as of now sorry..hope I helped supported ones are bcm4329 and bcm4330

how to enable RNDIS + DM + Modem mode?

HI DOES Anyone know how to enable RNDIS + DM + Modem mode?
i could access it on Stock rom but cannot on Custom rom is there a way to do it through Terminal mode? if so how please
anime12345 said:
HI DOES Anyone know how to enable RNDIS + DM + Modem mode?
i could access it on Stock rom but cannot on Custom rom is there a way to do it through Terminal mode? if so how please
Click to expand...
Click to collapse
Hi, I've used RNDIS (sharing PC's internet to phone) on my own phone (huawei honor 4c, Android 6, ROOTED!) but I believe the basics are the same. Generally to have RNDIS working (you can share your pc's internet to your phone) you must do the following steps:
1. connect phone to PC via USB cable & Install USB drivers
2. select RNDIS mode : (in my case) Settings > Developer options > Select USB configuration > RNDIS (USB Ethernet)
3. on the PC: share your internet connection to RNDIS connection (Note that windows 7 & higher uses 192.168.137.0 IP range for sharing connection, so you must use this range on your phone)
4. set an IP address on RNDIS dev & bringing it up (type in terminal emulator: ifconfig 192.168.137.2 rndis0 up)
5. set the default gateway for your phone (type in terminal emulator: route add default gw 192.168.137.1)
6. set DNS for your phone (refer to this thread for a complete guide, because setting DNS methods usually depends on phone rom & android version), I used this command & it answered me thanks to GokulNC:
Code:
ndc resolver setnetdns rndis0 <dns ip from my internet> 8.8.8.8
Good Luck!
hosseinb said:
Hi, I've used RNDIS (sharing PC's internet to phone) on my own phone (huawei honor 4c, Android 6, ROOTED!) but I believe the basics are the same. Generally to have RNDIS working (you can share your pc's internet to your phone) you must do the following steps:
1. connect phone to PC via USB cable & Install USB drivers
2. select RNDIS mode : (in my case) Settings > Developer options > Select USB configuration > RNDIS (USB Ethernet)
3. on the PC: share your internet connection to RNDIS connection (Note that windows 7 & higher uses 192.168.137.0 IP range for sharing connection, so you must use this range on your phone)
4. set an IP address on RNDIS dev & bringing it up (type in terminal emulator: ifconfig 192.168.137.2 rndis0 up)
5. set the default gateway for your phone (type in terminal emulator: route add default gw 192.168.137.1)
6. set DNS for your phone (refer to this thread for a complete guide, because setting DNS methods usually depends on phone rom & android version), I used this command & it answered me thanks to GokulNC:
Code:
ndc resolver setnetdns rndis0 <dns ip from my internet> 8.8.8.8
Good Luck!
Click to expand...
Click to collapse
I know this is 4 years ago but I've been pulling my hair out trying to do this in reverse. I have Lenovo Yoga 2 Pro running Android 9 x86 (Bliss 11.13 x64). It's rooted and the phone is Android 8.1 that is not rooted. I want use the phone as my wifi because the Yoga has a broken wifi card. The phone doesn't support USB tethering using wifi, only cell data. I use PDANet in Windows fine but it doesn't support USB tethering from Android to Android (to my knowledge). You can turn on RNDIS mode in Developer Options on the phone. Is this possible without rooting the phone?
i_guana said:
I know this is 4 years ago but I've been pulling my hair out trying to do this in reverse. I have Lenovo Yoga 2 Pro running Android 9 x86 (Bliss 11.13 x64). It's rooted and the phone is Android 8.1 that is not rooted. I want use the phone as my wifi because the Yoga has a broken wifi card. The phone doesn't support USB tethering using wifi, only cell data. I use PDANet in Windows fine but it doesn't support USB tethering from Android to Android (to my knowledge). You can turn on RNDIS mode in Developer Options on the phone. Is this possible without rooting the phone?
Click to expand...
Click to collapse
'dun' option in APN settings. Pretty much make a new APN and copy everything exact and then add dun to APN type.
anime12345 said:
HI DOES Anyone know how to enable RNDIS + DM + Modem mode?
i could access it on Stock rom but cannot on Custom rom is there a way to do it through Terminal mode? if so how please
Click to expand...
Click to collapse
On my Samsung A51, I can enable RNDIS + ADB mode by dialing *#0808# and choosing from the menu.
Dr Doppio said:
On my Samsung A51, I can enable RNDIS + ADB mode by dialing *#0808# and choosing from the menu.
Click to expand...
Click to collapse
*#0808# are working with Samsung devices.

Categories

Resources