Hi! I am have a Huawei Ideos X5 Pro, and I tried to upgrade to gingebread, updating V100R001C00B512G001'' numbered''. When I upgrade the internal SD gives me Update failed'' to'' five seconds to start updating ...
I think I've done everything right: Take Update.app step 1 and change the Update.app in step 2 by update_g.app put everything in the folder'''' dload.
What do I do? Help please. Thank you.
Put dload to external (not internal) memory card.
Why you updating to oldest version B512 while B565 is out?
Sent from my ragelis
download file again, of possible from a mirror outside China.
Probably your file is not correct
Sent from my U8800 using XDA App
In runs equally from internal out external sd
Sent from my U8800 using XDA App
I upgraded fine from external memory card.
Ideox x5 Pro Upgrade
May someone kindly send me a link from where I can download the Ideos x5 pro gingerbread firmware (B565). I would also would appreciate instructions on how to upgrade.
Regards,
Madimula
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyMTU=
+pdf+UGT
Huawei u8800+
I tried that link but it says page not found. Is there another link with the latest update, and instructions in English
supermanitas said:
Hi! I am have a Huawei Ideos X5 Pro, and I tried to upgrade to gingebread, updating V100R001C00B512G001'' numbered''. When I upgrade the internal SD gives me Update failed'' to'' five seconds to start updating ...
I think I've done everything right: Take Update.app step 1 and change the Update.app in step 2 by update_g.app put everything in the folder'''' dload.
What do I do? Help please. Thank you.
Click to expand...
Click to collapse
Solution
First delete the log file(if any) from the dload folder
Go to recovery mode by pressing volume up + power
Factory reset, wipe cache and dalvik
Go to mount and storage
Format boot
Format data
Format system
Now put the sdcard back to phone and restart the phone from recovery
The update process will start automatically
U r done
ENJOY.....
Sent from my U8800 using XDA
Sent from my U8800 using XDA
Huawei Ideos X5 Pro November Update
Hi Community Members,
I have bricked my Phone!!!!!!!!
I tried to install the Chinese B572 ROM, but failed. Now my phone just attempts to start, writes Ideos and then goes off. Thats it!
Please help.....
Where can I download the u8800pro v100r001c00b512g001(overseas normal)(gingerbread)ROM??? The Huawei link is not working.
Freeman
I am using Sony Ericsson Xperia Pro / MK16i with CM 7.2.
I would like to try CM 9 (any other ICS) on my mobile. I have downloaded CM9 from this forum and when I install the same, my phone is restarting continuously. I thought it is something to zip file. I have downloaded the same file number of times from different posts, but the result remains the same.
Kindly let me know what is the firmware or baseband I have to use and what is the kernel that I have to use for installing CM9 or any other ICS ROM on my mobile.
Everytime I had to restore the ROM back to CM7.2 None of the ROMs are working (CM9 which I have downloaded).
nagurvidyasagar said:
I am using Sony Ericsson Xperia Pro / MK16i with CM 7.2.
I would like to try CM 9 (any other ICS) on my mobile. I have downloaded CM9 from this forum and when I install the same, my phone is restarting continuously. I thought it is something to zip file. I have downloaded the same file number of times from different posts, but the result remains the same.
Kindly let me know what is the firmware or baseband I have to use and what is the kernel that I have to use for installing CM9 or any other ICS ROM on my mobile.
Everytime I had to restore the ROM back to CM7.2 None of the ROMs are working (CM9 which I have downloaded).
Click to expand...
Click to collapse
Did u use the kernel included in the package..?
Sent from my Xperia S using xda premium
I think so.
I have downloaded 2 files from this link.
Link :
http://forum.xda-developers.com/showthread.php?t=1445819
Files :
FXP117_update-cm-9.0.0-RC0-iyokan-UNOFFICIAL-signed.zip
and
XperiaPro_4.0.2.A.0.62_MK16.ftf
1.I have unlocked my mobile using "SE Bootloader_Unlocking_Relocking v1.6 by quangnhut123.
2. I have flashed my mobile using "XperiaPro_4.0.2.A.0.62_MK16.ftf"
3. I have flashed mobile using boot16i.img file which I have downloaded
4. I have opened CWM and then selected "Ïnstall Zip file from SD Card " then installed ""FXP117_update-cm-9.0.0-RC0-iyokan-UNOFFICIAL-signed.zip". I got the message that installation completed succesfully.
5. When I restart the phone, it is rebooting continuously.
Note : I have used different versions of the same zip file and img file. like (boot.img, boot16i.img and boot-18.8.img etc). But the result is same. But when I install CM7.2, it is working fine.
I am not sure what went wrong. Kindly help me.
Thanks dude.
I have extracted the zip file and flashed with boot.img file which was there inside the zip file.
Then I have installed zip file through CWM.
Thats working fine now.
Once again thank you so much.
Hey guys!
Unable to install the Recovery. From ROM Manager, brings me to the stock Recovery (Android system recovery <3) and when trying to install the ROM it gives me error:
E: "Failed to Verify whole-file signature"
Instalation aborted
I try to go to the screen rose to put the recovery.img but I mounted the SD card pc, so no choice ...
Any idea?Thank you!
PD: terminal Model: Huawei U8800 Pro
Sorry for not understand any word. This is the translator;(.
Who told you that u+ support rom manager???you need to unlock ics bootloader and then manually flash recovery.img!!
Dont use rom manager unless you have interest to go to the Service centre
-Rik[Rittik]
Rittik said:
Dont use rom manager unless you have interest to go to the Service centre
-Rik[Rittik]
Click to expand...
Click to collapse
Thanks a lot!!! Thread solved
do step by step these Instructions for flashing any ROM on GT-P1000 :
1- first you must install Samsung USB drivers from attachment
2- then you must root your device
you can root p1000 2.3.X with DoomLord V4
download Doomlord then extract into your pc
set your device in USB debugging mode then connect via usb cable into pc
go to folder and run as administrator mode "runme.bat" file
press any key and waiting until your device restarts
if you see "SuperUser" icon in apps root be successful
3- galaxy tab p1000 is an old android device so you cannot flash cwm recovery with "Rom Manager"
you must flash recovery with odin
download Odin 3 v1.7
download recovery file "http://www.mediafire.com/?q8s0wnj1s6109gc"
open odin and unchecked "Re-partion" *** if u check this maybe brick your device!!
http://forum.xda-developers.com/attachment.php?attachmentid=2230439&stc=1&d=1378154387
click on PDA and open recovery file that you download
turn off your device
then hold volume- with power button , go to downloading mode
connect tablet via usb to pc , waiting for installing drivers
goto odin if you see yellow COM text its ok ,,
click on START button and waiting until restarting your device
now recovery cwm is installed
4- download your favorites rom and copy it into your sd card folder
5- turn off the device and hold volume+ with power button for 10-15 sec
up = volume +
down = volume -
select = power
Make a Nandroid backup before you install the new ROM.
go to wipe cash and do it
go to factory reset and do it
go to advanced and wipe calvik and wipe battery stat
then go back and select install zip from sd card
select your ROM file and tap power button , wait for installing rom
after you see Successful text you can reboot device and Enjoy from your new ROM
if you see this error : install aborted (status 7)
go to mount and storage then unmount "/system"
then format "/system" and "/data"
try again and it will be ok !!
View attachment Odin3_v1.7.rar
View attachment DooMLoRD_v4.zip
what files i have to use for p1N?
Stuck at pc ! mobile screen
While doing the steps, after I pressed start Odin said "fail!" with a red square above the yellow com12 square, I disconnected the device and connected it again but ended t this screen with mobile ! pc
thanks
whats is version of this CWM ?
there are thousand of such tuts are here.. atleast provide some roms
even if you dont wipe your data new rom will be installed i tested it
nandroid backup are rubbish just try to restore from nandroid backup and your tab will be bricked( my personal exp 4 days ago)
Is Doomlord handling 2.2 tabs also, or I need 2.3 somehow? Kies is not offering a fw update.
Sent from my GT-P1000 using xda app-developers app
Error
Hey XDA,
I Have a gt-p1000 , i rooted it succesfully using ut methods and wanted to install cwm . I tried by ur method but ended up bricking
I unbricked using ur method and now a prob arises
I get the superuser icon in my laucncher but i have lost root access ..
What to do ... Please Help
U cAN unroot it using xda 's unbrick method
Unfortunately u have bricked ur device but no big issue and i did it so its very easy
evry time i try this i end bricking my device ....
Pls help i wanna install a custom rom on it
Use overcome method. Follow my signature.
Sent from my GT-P1000 using xda app-developers app
If i rooted only the tab will be formatted?
sent from my GT-P1000 using XDA Premium
noo
hamada3381 said:
If i rooted only the tab will be formatted?
sent from my GT-P1000 using XDA Premium
Click to expand...
Click to collapse
no rooting will not delete any data
I think there is a problem with the recovery file
---------- Post added at 11:15 PM ---------- Previous post was at 10:19 PM ----------
If you will use "Installing Stock Rooted Rom" method then it will be formatted, but if it's rooting with some file then i think it's ok
I completed step 3, it said that all completed but now it is stuck in a restart loop, it shows some error colors (see image), then it shows Samsung logo, vibrates 3-4 times and it restarts again.
I cannot seem to get it recovery mode (UP+Power), download mode enters OK (Down+Power).
Any ideas ?
suite?
adrianTNT said:
I completed step 3, it said that all completed but now it is stuck in a restart loop, it shows some error colors (see image), then it shows Samsung logo, vibrates 3-4 times and it restarts again.
I cannot seem to get it recovery mode (UP+Power), download mode enters OK (Down+Power).
Any ideas ?
Click to expand...
Click to collapse
do you have solved this problem? I have the same picture after installed the CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar file.
Thanks
I was able to fix mine using instructions from a different topic, it was about the "Overcome" (images, rom or whatever was that), the file name is "The_Installation_Guide_The_Overcome_Experience.pdf" and at some point it tells you to load around 3 different files in that program, and flash them all.
After this I was able to put Cyanogen images on card and easy install them with the ClockWork mod loader.
Yeah. Do not panic if the video is hosed. I also got strange disruptions when following 'some online guides'.
The closest guide I have found that works to upgrade from Stock reliably, is the process mentioned on https://goo.im/devs/cmwiki/p1/p1c/ (Verizon CDMA P1000). I only have the CDMA version, not the SIM card version.
This is undergoing major revisions. I hope. I can say there are two (2) Verizon SCH-I800 recovery images available now. One that works is the ODIN image from TheCollective.
forum.xda-developers.com/showthread.php?t=2383201
TheCollective repository http://www.theandroidcollective.org/i800/public/
I have tested this image. It works.
I recovered the device after a working 2.3.5 stock was running (from the other viable stock image) and I wanted to flash a modem.bin from heimdall. Mistake. Device locked up at 100% along with heimdall, and a forced reboot (hold power down) only gave the
PHONE - ! - COMPUTER
screen.
It would also work to restore from Download mode, with ODIN and TheCollective stock.
I have never gotten the modem working again, though.
Hi there, where can I get a superuser flashable zip for P1000? I changed from cyanogenmod to omnirom and I have lost root access.
Are you sure? I am using Omnirom and I have super user.
You mean you don't have the SuperSu or whatever icon in app tray.
Go to Settings, scroll down all the way, above "about tablet" and performance, is there a SuperSu option?
Sent from my GT-P1000 using XDA Free mobile app
i opened downloading mode but Odin is not showing anything i install given or i download latest usb driver
i am unable to flash any rom into my device using twrp or custom yureka recovery..pls help fast
moderator pls delete this thread...actually i posted in tension that device is not working..not it is working fine
tried
using twrp--- it is just flashing screen but not flashing any rom to device
using custom recovery --- it says signature verificaiton failed even i downloaded it from official cyanogen mod website
solved
akhilchirra said:
using twrp--- it is just flashing screen but not flashing any rom to device
using custom recovery --- it says signature verificaiton failed even i downloaded it from official cyanogen mod website
Click to expand...
Click to collapse
atlast after hard bricking my phone..some how recovered my yureka back...now working properly..:fingers-crossed: