i am unable to flash any rom into my device using twrp or custom yureka recovery..pls help fast
moderator pls delete this thread...actually i posted in tension that device is not working..not it is working fine
tried
using twrp--- it is just flashing screen but not flashing any rom to device
using custom recovery --- it says signature verificaiton failed even i downloaded it from official cyanogen mod website
solved
akhilchirra said:
using twrp--- it is just flashing screen but not flashing any rom to device
using custom recovery --- it says signature verificaiton failed even i downloaded it from official cyanogen mod website
Click to expand...
Click to collapse
atlast after hard bricking my phone..some how recovered my yureka back...now working properly..:fingers-crossed:
Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
thereĀ“s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
Hello everyone,
Im using my yureka since more than a year...I hav rooted, changed roms, kernels, softbricked, hardbricked and debricked and got rid of such sort of problems by following the posts in xda.
A month ago, i flashed stock rom cm11, rooted and flashed twrp recovery.. It worked good with no problems, but today while iam chatting, my phone freezed all of a sudden and switched off with no cause and thats it...ENDLESS BOOTLOOP!! :crying:
I tried flashing stock rom and other roms too...but same condition...bootloop continues...!! anyone expert or who know how to overcome this problem please help me in reviving my phone back to working...!! :crying: :crying:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
ravi44teja said:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
Click to expand...
Click to collapse
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Abhi_569 said:
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Click to expand...
Click to collapse
thanks for ur reply buddy...i tried ur suggestion...but didnt work..
actually, when no procedures worked, i myslf hardbricked phone by flashing cm12.1 using kitkat flashtools, its screen gone blank and bricked and then i used the sd card method of debricking mentioned here http://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112
it then came upto cyanogen logo and hanging there, i tried flashing cm12.0 and same stuck at cyanogen logo..then i flashed cm11 stock rom, it booted up and switched on...
but now,
(1) wifi not switching on,
(2)Internal memory corrupted and showing error while opening file explorer as "there is no information available for the file system" , "the file or folder was not found" and internal memory not showing in pc..
(3) while opening camera it shows "revert to default file location", "insert SD card before using the camera" and unable to capture photos
(4) while trying to take screenshot, in notification panel it shows "couldnt capture screenshot, couldnt save screenshot, storage may be in use"
(5)sim cards not detecting at all
in cm 12.0 and 12.1, its nomore beyond cyanogen logo...:crying:
Fixied ?
Hell7 said:
Fixied ?
Click to expand...
Click to collapse
not yet bro
hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.
Help? Every rom seems to give me boot loop after install and a couple of roms get to 50 percent installing then TWRP reboots (mostly pixel rom and rr does this)
I also tried nougat and marshmellow stock roms and they both give drk check error, I flash super su like I used to do to fix drk check error and it just boot loops now
All the roms I used to be able to install fine now just boot loop
Pixel rom
Fast and famous rom
Infinity rom
Lineage os
Resurrection remix
All of these roms above I have had on my phone at some point and all worked fine now I just get boot loop after installing them.
14 views and no one can help me?
Still have no phone as I still cannot boot.
are you using a correct kernel or twrp for your device
blackbravo said:
are you using a correct kernel or twrp for your device
Click to expand...
Click to collapse
I'm not sure my device is G928F Can you link me to the correct kernel? And I think the TWRP is 2.7.8 or something like that
download twrp here: https://twrp.me/samsung/samsunggalaxys6edgeplus.html
flash over odin
and choose one rom with kernel included, because you must have the correct kernel for the rom you install
blackbravo said:
download twrp here: https://twrp.me/samsung/samsunggalaxys6edgeplus.html
flash over odin
and choose one rom with kernel included, because you must have the correct kernel for the rom you install
Click to expand...
Click to collapse
Okay so tried a couple roms and they all crash like sometimes at 10 percent sometimes around 50 but they always crash and TWRP restarts. Something to do with the aroma installer roms, tried multiple different TWRP versions and nothing likes the aroma installer roms, any suggestions? Also tried multiple nougat and marshmellow roms and I get drk check failed everytime.
I used to be able to flash SuperSU zip and it would fix drk check failed but it no longer does
Can someone please give me any suggestions at all as I would like to use my phone again
jacksskinz said:
Okay so tried a couple roms and they all crash like sometimes at 10 percent sometimes around 50 but they always crash and TWRP restarts. Something to do with the aroma installer roms, tried multiple different TWRP versions and nothing likes the aroma installer roms, any suggestions? Also tried multiple nougat and marshmellow roms and I get drk check failed everytime.
I used to be able to flash SuperSU zip and it would fix drk check failed but it no longer does
Can someone please give me any suggestions at all as I would like to use my phone again
Click to expand...
Click to collapse
And install stock ROM via Odin? Not working ?
blackbravo said:
And install stock ROM via Odin? Not working ?
Click to expand...
Click to collapse
It works but when booting I get DRK CHECK FAILED
blackbravo said:
And install stock ROM via Odin? Not working ?
Click to expand...
Click to collapse
Okay I've narrowed it down to system
When installing any rom it seems to crash when it gets to installing system and then TWRP reboots
I've checked that system is mounted which it is
Also it seems system is at EXT4 file system
Dunno if that's good or bad but either way every rom is crashing when it gets to installing system
Any ideas?
jacksskinz said:
Okay I've narrowed it down to system
When installing any rom it seems to crash when it gets to installing system and then TWRP reboots
I've checked that system is mounted which it is
Also it seems system is at EXT4 file system
Dunno if that's good or bad but either way every rom is crashing when it gets to installing system
Any ideas?
Click to expand...
Click to collapse
Can someone help please before I buy a new motherboard? Roms crash when it starts installing system
Download stock nougat, and flash it, but make sure csc is selected, and not home_csc, because csc will put phone to real stock settings.
Flash the latest stock firmware for your *correct variant*. Sammobile's downloads are kind of slow, but I've never had issues with any of their firmwares. Install that with Odin and your phone on download mode. I would recommend to use HOME CSC, just to make sure it is completely clean. After you set it up, flash your *correct variant's* TWRP via Odin. To save yourself some time, you can boot straight into TWRP when it finishes installing by pressing home + power + volume up when the screen goes out. From here you can load ROMs from a PC via USB. Good Luck and Happy Flashing!
I tried to install a custom rom on a a6000. I installed the lolipop stock rom on top of the KitKat stock rom, and managed to boot to it without a problem. I then installed TWRP installed is: 3.3.1-0, and tried to install a custom rom (more specifically I tried this unofficial Lineage). For some reason, the installation fails with:
e3004: This package is for device: Kraft-T, a6000, K30-T,A6000, Kraft-W, Kraft-C, k30t, msm8916,Kraft-A6000,wt86518; this device is .
Updated process ended with ERROR 7
Click to expand...
Click to collapse
when booting into the stock lolipop rom installed I can see that the device is the A6000. I find it strange how the recovery doesn't write which device it is on this error message.
What am I missing here? Usually with other phones, as long as you manage to install a custom recovery then it's a breeze. I cannot figure out how the custom roms don't get installed. Any help appreciated
Managed to flash it in the end. The flash files contain assertions checking if the zip is okay to be flashed on the device (whether the model is the one intended for example).
I found it strange that the error message did not show the model of my device as I was 100% sure it is a A6000 and that is a ROM intended for it.
I ended up overriding the assertion in the file, which seemed to be straightforward to do and the image was flashed without any issues.
DO NOT TRY THIS AT HOME unless you are 10000% sure the image is intended for the device. ?
runningdap said:
I tried to install a custom rom on a a6000. I installed the lolipop stock rom on top of the KitKat stock rom, and managed to boot to it without a problem. I then installed TWRP installed is: 3.3.1-0, and tried to install a custom rom (more specifically I tried this unofficial Lineage). For some reason, the installation fails with:
when booting into the stock lolipop rom installed I can see that the device is the A6000. I find it strange how the recovery doesn't write which device it is on this error message.
What am I missing here? Usually with other phones, as long as you manage to install a custom recovery then it's a breeze. I cannot figure out how the custom roms don't get installed. Any help appreciated
Click to expand...
Click to collapse
Hi... Actually you can flash custom ROM on Lenovo a6000.
Im also using Lenovo a6000 and I'm running custom ROM.... feel free to Reply if u need any help..I'm glad to see that you will.?