[Q] two common bugs on official firmware b136, b138 and b526 - Huawei Ideos X5 U8800

after flashing official firmware (by copying dload folder to sdcard and start with pweron&vol+&- button) there are following two major problem:
1. IMEI = 0 : i have recovered this by dfs tool or 5irom backup.(both method working successfully to recover imei no)
2. usb mount problem:
a)when i connect to usb port to computer, its shows a message when i tap to "turn on usb storage" it is not working properly
b)if i dial *#*#2846579#*#* >projectmenu>background setting>usb port setting>google mode, then only the accessing(as rw) of sdcard possible by computer
i dont want to set this google mode each time
plz help to sort out this problem
Hint: i think this probelm is related to DBAdapter interface OR projectmenu>background setting>qualcomm open setting>background open

Related

[Q] Help required to connect wave 2 8530

i have a wave 2 8530 but every time i connect it to pc it say USB device not recognised. i have tried installing and reinstalling many times. but it is the same. as a resutl of which i could not flash my old firmware (s8530DDKA1). plz help. thanks in advance
Can you change USB port?
possible solutions
install kies and it will install the usb drivers
change the usb port
try to make windows able to get drivers using windows update feature (solves a lot of unable to connect issues)
its stil not recognizing
the phone screen says initializing only. it does not change from that.
First install kies and all drivers correctly.
Then, you need to register 2 dll :
From command line of windows, type the following commands:
cd c:\windows\system32
regsvr32 msxml3.dll ( a message box will appear to inform you that registration is ok)
regsvr32 msxml6.dll ( a message box will appear to inform you )
After start kies and connect your phone (preferably choose a new usb port).
It should work
Had the same problem with my Wave...
GO up to your Device manager (Right-Click on My Computer->Device Manager)
Then see if there is a exclamatory mark on any icons which relates to your phone.
If yes, Just update the Kies to newer version, else try komanguy's method after upgrade...Revert back and tell me your changes

MX5

Hi all,
I have a serious issue with my MX5.
This morning it is remaining on logo MEIZU...no more.
With button up + power and connected on my PC , I can get a recovery folder (1.2 Gb) on the PC.
If I put an update on the folder , after start "System upgrade", I have the message "Firmware not found" and curiously the upgrade file disappears from the recovery folder ?????
So I can do nothing.
What file can I put in this folder to go on ?
Any idea ?
Have you tried with other usb port, with other pc, with other usb cable and with other update.zip?
1) Download a proper update.zip version
2) If you tried to so something through Freeboot or etc, send it back to Meizu for fixing
3) As usual, change cable, use other usb port or even other computer
4) Repair your memory
5) Pray

[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore

In this Thread i will explain how to set up MTK drivers and Flashtools.
Guideline:
Post #1 : Set up MTK drivers in Windows 8 / 8.1 / 10
Post #2 : Use Flashtools for MTK Devices
Post #3 : How to Root Stock Rom
Post #4 : Windows 10 MTK Drivers installation ( just in case post #1 dont work )
Post #5 : Lost IMEI Backup​
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
How to Install MTK drivers in Windows 8 / 8.1 / 10
what we need:
MTK Vcom Preloader Driver 2.0
Download : https://www.androidfilehost.com/?fid=24438995911977169
First thing we need is to Disable the Signed Driver verification on Windows :
To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager.
The easiest way to bring this screen up is using this secret trick.
Hold down the SHIFT key while you click Restart.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once your computer has rebooted you will be able to choose the Troubleshoot option.
Then head into Advanced options.
Then Startup Settings.
Since we are modifying boot time configuration settings, you will need to restart your Computer one last time.
After restarting your computer a second time,
choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
That’s all there is to it. Your PC will then reboot and you will be able to install unsigned drivers.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Now its Time to open SP_Driver_v2.0.zip and start the DriverInstall.exe
it will open the install prompt . Press okay and dont change the installation path
Code:
C: // program files / Mediatek / Driver Package
during the installation it will start the verification window security.
Click on Install this driver software anyway
There will be an Error Message . - We Ignore it !
-Now Open your Device Manager and leave it open.
-Power Off your Phone and connect it with your Pc.
-you will see Under ports ( COM & LPT ) a Preloader unknown device
right click on there and click on Driver update/installation.
-Choose manually search for drivers
-Browse to C:// program files / Mediatek / Driver Package and apply.
-If all went good you have successfully installed the MTK Vcom Drivers. :good:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>​
How to Use Flashtools
i use SP_Flash_Tool_Windows_v5.1520.00.000 and never had a problem with it.
Its for most all MTK Phones and for all Elephone Devices
Download Link: https://www.androidfilehost.com/?fid=24438995911977217
- Extract the Flashtool zip folder to your Desktop
- Click flash_tool.exe to open the Tool
- You will see two "folder buttons" Download agent and Scatter-loading
- Into Download agent place the MTK_AllInOne_DA.bin file .
its in your Flashtools folder
- Into Scatter-loading place the Scatter.txt
All Stock Roms / Custom Recoverys have one Scatter.txt in their Zip files.
- Make sure that every partition is checked
-IMPORTANT NOW, Flashing Part-
-Power Off your Device!
-Press on the Download Button!
-Connect your Device with PC and wait until all is flashed
-you will see a Green Mark when all is done
-Disconnect your Device and press Power button to Reboot.
:fingers-crossed::good::fingers-crossed:
------------------------------------------------------------------------------------------------------------------------------------------------​
How to Root Stock Rom
-If you want to Root your prefered Stock Rom
-Place SuperSU into your Sdcard
-Flash a Custom Recovery with Flashtools and its Scatter.txt
-Hold Vol+ and Power to get into Bootloader Menu
-Navigate with Vol+ and apply Recovery with Vol-
-Flash Supersu.zip
-Reboot
Stock Roms:
Stock ROM Elephone P9000_Android 6.0_20160315 Link: http://bbs.elephone.hk/thread-9967-1-1.html#[email protected]
CWM Recovery:
Link : https://www.androidfilehost.com/?fid=24459283995304518
100% bug free Supersu v.2.46.zip
https://download.chainfire.eu/696/SuperSU/​
Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial
To determine the version of Windows 10 that you have (32 bit or 64 bit):
- Right-click on Start then click on System
- In the System window that opens, in System section, you will find your version of Windows next to System type
To disable Windows 10 64 bit driver signature enforcement:
- On your 64 bit Windows 10 desktop click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- After restart you can proceed with the unsigned MTK drivers installation for your 64 bit Windows
- After you install the unsigned drivers, to use them again in the future, you have to repeat this procedure
To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:
- Download the drivers *.zip archive and extract the folder from inside on to the desktop:
https://www.androidfilehost.com/?fid=24269982087012126
Right-click on Start then click on Device Manager
In the Device Manager Window click on the first item – your computer name
Click on Action then Add legacy hardware
On the Welcome to the Add hardware Wizard window click on Next button
Select Install the hardware that I manually select from a list (Advanced) and then click on Next button
Click on Show All Devices then on Next button
In the Add Hardware window click on Have Disk… button
In the Install From Disk windows click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning
Select the version of the driver according to your Windows 10 version – x64 for 64 bit and x86 for 32 bit and click Open button
Click the OK button to load the driver
From the list of drivers select MTK USB Port and click on Next button
If a red warning window will open, click on Install this driver software anyway
This action will add the following drivers in to the operating system:
- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)
Now we need to remove the device that we have installed but leave the drivers in the operating system.
To do that, in the Device Manager window we expand Ports (COM & LPT) section
Right-click and click Uninstall on the MTK USB Port
- In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
- You need to leave the drivers in the operating system and only remove the device that you added
- Click on the OK button to finalise
Now, when you will connect your turned off MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the Download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.
Download SP Flash Tool v3 & v5 – Latest versions:
http://laurentiumihet.ro/technology/download-sp-flash-tool-v3-v5-latest-versions/
TUT found here : http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
cheers​
Lost IMEI Restore
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI. I will split the tutorial into two parts.
BACKING IMEI :
-First step before performing all these things is that your phone should be rooted.
When your phone is in normal state with everything functioning install Root explorer and navigate to the below location
Code:
>ROOT>DATA>NVRAM>MD>NVRAM>NVD_IMEI>MP0B_001
-Now copy this MP0b_001 file to your SD card or PC whichever place you feel the file we be safer.
-Now download MTK Droid tools .
-Now extract the zip file and open the MTK droid tools exe file.
-Now in your phone turn on USB Debugging by going to Settings->About phone-> Developer options and there turn on USB debugging.
-Now connect your phone and MTK droid tools should be able to detect your phone. U should see a window like this appearing after your
phone has been detected.
-Now press the ROOT button present in lower right corner. When it asks Supersu grant in your mobile click allow. After MTK droid gets
access u should see a green colour box appearing in the lower left corner which means u have correctly granted access to MTK droid.
-Now click on the IMEI/Nvram tab. A window should open and click backup NVRAM and MTK droid tools would take a backup of NVram in
its folder.
RESTORING IMEI :
-Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through
Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI.
-Now paste that file and replace the one present there. Set the permissions for that file as RWER-ER-E. Now reboot your phone and you
should be able to get your IMEI back.
If you still haven’t got IMEI open MTK droid tools and connect your phone and press ROOT again and give MTK droid tools root access.
-Now click on IMEI/Nvram tab and select Restore option and restore the NVram backup which you took earlier. Now reboot your phone and
you should be able to get your IMEI.
Extreme method :
-After performing all the above if you haven’t still got IMEI. Now switch off your phone and open SP Tools and connect your phone.
Click on format and format your whole phone. ( This wipes whole of the phone including NVram region ).
-Now flash stock ROM through SP Tools and after it completes start up your phone. ( Don’t be surprised. Your IMEI will still be in lost state
only ). Now root your phone.
-After successful rooting now connect your phone to MTK Droid tools and again press ROOT button and grant root access to MTK Droid
tools. Now click on IMEI/NVram tab.
-Now as you see in the image above you can see two boxes IMEI1 and IMEI 2. Now enter your device IMEI numbers manually in those two
boxes.( You can get your IMEI no’s from your phone box ). Now click replace IMEI. Now reboot your phone and you should be definitely able
to get your IMEI restored.
MTK DROID TOOLS LINK : https://www.androidfilehost.com/?fid=24438995911972546
found: http://www.androiddevs.net/restoring-lost-imei-mtk-phone/​
MTK droid tool doesn't recognize my device. I turned on USB debugging and drivers are installed. Can somebody help ?
I'm having same issue here on Win10 installed the drivers etc... using latest SP Tools plug phone in and try and put recovery as a download nothing happens.
EDIT: Nvm got it working realised I was downloading and plugging in the phone in the wrong order.
Windows defender says MTK Vcom Preloader Driver 2.0 has got a trojan: Win32/Spursint.A!cl but i downloaded drivers from http://spflashtool.com/ instead.
False warning?
/#LOUDmouth#
#LOUDmouth# said:
Windows defender says MTK Vcom Preloader Driver 2.0 has got a trojan: Win32/Spursint.A!cl but i downloaded drivers from http://spflashtool.com/ instead.
False warning?
/#LOUDmouth#
Click to expand...
Click to collapse
False positive
kopasz93 said:
MTK droid tool doesn't recognize my device. I turned on USB debugging and drivers are installed. Can somebody help ?
Click to expand...
Click to collapse
I have a solution for restoring IMEI:
In the dialer: *#*#3646633#*#*
OR
download "MTK engineering mode" app and start it
it will open engineering mode:
1/ go to "Connectivity" tab
2/ go to "CDS information"
3/ go to "Radio information"
4/ then select "Phone 1"
5/ At the top there is a command line "AT+" in it
6/ type AT+EGMR=1,7,"your imei number" (for example: AT+EGMR=1,7,"012345678901234")
7/ then hit "Send at command" (if you got error try to put space between "AT" and "+")
8/ go to "Phone 2" and type in the command line: AT+EGMR=1,10,"your imei"
9/ hit "send at command"
10/ restart your phone and it should work
You can check if it changed at Settings -> About Phone -> Status -> IMEI information
If your forgot your original IMEI numbers you can find them on the box of the phone
MTK droid tool recognizes my phone, but do not get the green button so root error. Granted permission in supersu.
If anyone is still struggling (like me) with the error: Initializing scatter file failed. Please check the name of the scatter which you load is legal
i solved by using SP Flash Tool 5.1552.00.000 downloaded from
https://mega.nz/#!ixdnhDLK!oOaAsJrcvJI0vH3fTsUOYjtDxQ_HT61E-_iuo6fTuKk
as specified in elephone forum flashing guide
http://bbs.elephone.hk/thread-1037-1-1.html#.VWgkX_RAU-0
Use latest v5.162 version
Gesendet von meinem P9000 mit Tapatalk
Linux way?
Is there a way to root my brand new P9000 in Linux?
I flashed the linked SuperSU 2.46 with TWRP but when i start the SuperSU App it says that there is no su-file installed - any ideas?
sundawn said:
I flashed the linked SuperSU 2.46 with TWRP but when i start the SuperSU App it says that there is no su-file installed - any ideas?
Click to expand...
Click to collapse
Why on earth are you using such an old version of SuperSU?
You are probably using TWRP 3.0.0 which does not work on newer ROM versions. Try flashing TWRP 3.0.2-1.
Well i used it because it is said to work in this tutorial
The newer one didnt work either, as you said i think its the TWRP 3.0.0
I would like to download this http://www.needrom.com/download/twrp-3-0-2-1-4/
but i dont get any registration mails, tried to register with 2 different emails half an hour ago...
The version here on XDA is said to be only for P9000 Lite.
Edit: Ok got my login by using the forgot password function - the linked TWRP 3.0.2 and installing SuperSU 2.65 works.
Thanks!
also would like to know, can we fastboot the recovery as per all the other android phones i've used? And then custom ROM to our hearts content?
n1ck75 said:
also would like to know, can we fastboot the recovery as per all the other android phones i've used? And then custom ROM to our hearts content?
Click to expand...
Click to collapse
Yes. In Settings / developersettings enable oem. unlock Bootloader.
Then reboot to Recovery and go to power/ reboot to fastboot.
Then Unlock your Bootloader with the fastboot oem Unlock command.
After that you can use fastboot.
P.s: i didnt did that. But it should work
Gesendet von meinem P9000 mit Tapatalk
skeleton1911 said:
Yes. In Settings / developersettings enable oem. unlock Bootloader.
Then reboot to Recovery and go to power/ reboot to fastboot.
Then Unlock your Bootloader with the fastboot oem Unlock command.
After that you can use fastboot.
P.s: i didnt did that. But it should work
Gesendet von meinem P9000 mit Tapatalk
Click to expand...
Click to collapse
Thanks for the prompt reply;
Have got to the fastboot oem unlock part, gives option for
Vol Up - Unlock
Vol Down - Cancel
Vol Up doesn't work? Can only Vol Down

[GUIDE] Install VoLTE update on Lenovo Vibe K5

Hi guys,
This is a step-by-step guide to update your Lenovo Vibe K5 (a6020a40) to the latest build S102 with VoLTE support, or basically to install VoLTE update on Vibe K5.
Since many guides & youtube videos tell different methods, I have come up with the best solution.
Requirements
-Lenovo Vibe K5 (a6020a40) (SD 415, 2GB RAM variant) running any ROM
-S034 firmware: https://docs.google.com/a/repairmymobile.in/uc?id=0B1hm-6TNn10IcUtHOWZLaUtzUEU&export=download
-OTA Zip to set Country as India: http://www.mediafire.com/file/j6icttemsrq266e/India.ota.zip
Please note that this will erase your data & internal storage
Also note: If you already are on S034 build with stock recovery installed & not rooted, then skip the steps 1-9.
Steps:
1) Download the S034 firmware file and extract it to some handy location (preferably desktop).
2) Go to the "Drivers' folder in the extracted files and install Lenovo USB Driver, and then install Qualcomm USB Driver.
3) Now to go to the "Tools" folder in the extracted files and install QPST.
4) Download the OTA zip to set country as India, and copy it to your device's external SD card.
4) Take backup of all your stuff (apps, messages, contacts etc). The next steps will wipe your data & internal storage, so if needed copy your internal storage to your PC or external SD card.
6) Open QFIL from Start Menu as administrator (Start Menu > All Programs > QPST > right-click on QFIL and click "Run as administrator")
7) Copy the "SW" folder in the extracted files, to the root of your C:\ drive in your PC. Otherwise, sometimes QFIL gives a "sahara" error while flashing.
5) Now power off your phone. Make sure its not connected to your PC. Remove your SD Card from the phone to be on the safer side. Once it is powered off, press the volume up & down buttons together and connect your phone to your PC. The screen should now be black & the notification led on your phone should turn red.
6) Now QFIL should show "Qualcomm HS-USB QDLoader 9008".
6) In QFIL, click Browse and go to C: drive > SW > Images and double-click on "prog_emmc_firehose_8929.mbn". Then click on "Load XML", and in the file selection window that opens, double click on "rawprogram0.xml" and on the next window, double-click on "patch0.xml"
7) Now click on "Download" button. This is the step that erases your data & internal storage. This step will take around 10-15 mins.
8) Once it shows "Download complete" with a blue text in the downloader log (bottom part of QFIL window), disconnect the USB and power on your phone. Since this is the first boot, it will take around 5-10 mins.
9) Now, once it is booted and it shows the welcome screen, power off your device.
10) Once your device is switched off, press Vol up + Vol down + Power buttons together until Lenovo logo appears. Now it should boot into Recovery mode.
11) Navigate to "apply update from sd card" using Vol up & vol down keys and press power button to select that option. Now navigate to the file "India.ota.zip" which you copied at the beginning and press power button to install. This will take 5-10 mins and again data will get erased (not internal storage). After installation the device will reboot automatically. It will take 5-10 mins to boot.
12) Now once it is booted, complete the setup guide, and make sure your device is connected to internet. And then go to Settings > About device > System updates. It should show a new update of 49 MB. Download it. Once it is downloaded, tap OK to install the update. This will again take 5-10 mins & will NOT wipe anything. After installation your device will automatically reboot.
13) Check if you have S102 build number (Settings > About device > Build number). If yes, then you're all done. Now VoLTE is enabled in your Vibe K5 A6020a40. If you want you can restore any backups to your device. :good:
Adithya R said:
Hi guys,
This is a step-by-step guide to update your Lenovo Vibe K5 (a6020a40) to the latest build S102 with VoLTE support, or basically to install VoLTE update on Vibe K5.
Since many guides & youtube videos tell different methods, I have come up with the best solution.
Requirements
-Lenovo Vibe K5 (a6020a40) (SD 415, 2GB RAM variant) running any ROM
-S034 firmware: https://docs.google.com/a/repairmymobile.in/uc?id=0B1hm-6TNn10IcUtHOWZLaUtzUEU&export=download
-OTA Zip to set Country as India: http://www.mediafire.com/file/j6icttemsrq266e/India.ota.zip
Please note that this will erase your data & internal storage
Also note: If you already are on S034 build with stock recovery installed & not rooted, then skip the steps 1-9.
Steps:
1) Download the S034 firmware file and extract it to some handy location (preferably desktop).
2) Go to the "Drivers' folder in the extracted files and install Lenovo USB Driver, and then install Qualcomm USB Driver.
3) Now to go to the "Tools" folder in the extracted files and install QPST.
4) Download the OTA zip to set country as India, and copy it to your device's external SD card.
4) Take backup of all your stuff (apps, messages, contacts etc). The next steps will wipe your data & internal storage, so if needed copy your internal storage to your PC or external SD card.
6) Open QFIL from Start Menu as administrator (Start Menu > All Programs > QPST > right-click on QFIL and click "Run as administrator")
7) Copy the "SW" folder in the extracted files, to the root of your C:\ drive in your PC. Otherwise, sometimes QFIL gives a "sahara" error while flashing.
5) Now power off your phone. Make sure its not connected to your PC. Remove your SD Card from the phone to be on the safer side. Once it is powered off, press the volume up & down buttons together and connect your phone to your PC. The screen should now be black & the notification led on your phone should turn red.
6) Now QFIL should show "Qualcomm HS-USB QDLoader 9008".
6) In QFIL, click Browse and go to C: drive > SW > Images and double-click on "prog_emmc_firehose_8929.mbn". Then click on "Load XML", and in the file selection window that opens, double click on "rawprogram0.xml" and on the next window, double-click on "patch0.xml"
7) Now click on "Download" button. This is the step that erases your data & internal storage. This step will take around 10-15 mins.
8) Once it shows "Download complete" with a blue text in the downloader log (bottom part of QFIL window), disconnect the USB and power on your phone. Since this is the first boot, it will take around 5-10 mins.
9) Now, once it is booted and it shows the welcome screen, power off your device.
10) Once your device is switched off, press Vol up + Vol down + Power buttons together until Lenovo logo appears. Now it should boot into Recovery mode.
11) Navigate to "apply update from sd card" using Vol up & vol down keys and press power button to select that option. Now navigate to the file "India.ota.zip" which you copied at the beginning and press power button to install. This will take 5-10 mins and again data will get erased (not internal storage). After installation the device will reboot automatically. It will take 5-10 mins to boot.
12) Now once it is booted, complete the setup guide, and make sure your device is connected to internet. And then go to Settings > About device > System updates. It should show a new update of 49 MB. Download it. Once it is downloaded, tap OK to install the update. This will again take 5-10 mins & will NOT wipe anything. After installation your device will automatically reboot.
13) Check if you have S102 build number (Settings > About device > Build number). If yes, then you're all done. Now VoLTE is enabled in your Vibe K5 A6020a40. If you want you can restore any backups to your device. :good:
Click to expand...
Click to collapse
thanx for the tutorial.. no matter it'll work or not but you wrote the guide in well explained way.
Does this process require internet connection on the pc
ayushmann12 said:
Does this process require internet connection on the pc
Click to expand...
Click to collapse
No!
thanx a tonne
Thank u very much dude:good::good::good::good:
I have S056 build number. What should I do?
Please Help...........
Can you please repost the downloads - S034 firmware link not working says quota exceeded from Google Docs.
Not working...I have an error when I click on system update .
Error = network connection failed please try again
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
Not working...I have an error when I click on system update .
Error = network connection failed please try again
sahara error
I m on resurrection remix rom now in rr my device showing as k5 plus, but I own k5, when I tried to flash I m getting sahara error... Plz help. Attached pic of flash error
Thanks Team
Finally, my phone is Volte enabled. Much Thanks, appreciated all your hard work. Thanks Again..
My Volte is not working properly!!!
I have Lenovo Vibe k5 this Volte phone..
Device showing on status your device is hd capable but my phone is not able to call but when someone is calling me it coming perfectly... When I find solutions then I look in other Vibe k5 users settings they have an option enhanced LTE 4g mode .. but in my phone this option is missing !!!!!! May be my OTA.zip is not installed correctly so plz.... If you have india.ota.zip for s007 build plz give me link......
Thanks For understanding my problem!!!!!!
VOLTE Update
Thanks man!
By following all the steps my phone got VOLTE enabled.
I have updated my Lenovo Wibe K5 to PACROM Android 6. But unable to make or receive calls.
Will you please help me with this issue?
Thanks in Advance.
Getting sahara error..
Please let me know the way ahead.

[Guide] Enable Volte on custom rom (Android 10) (Rooted)

Disclaimer: I do not know the underlying working of what this procedure does. Just sharing what's working for me. I do not take responsibility for any problems which might arise from following this guide. Please proceed with caution.
I have tested this on the Oneplus 3t and only for airtel india. Please feel free to experiment and report for other carriers.
References:
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
https://forum.xda-developers.com/on...n-carriers-t3817542/post77874888#post77874888
https://github.com/edgd1er/voenabler
This guide will proceed assuming that Volte is working on OOS 9.0.6 for your carrier and does not work with the custom roms.
prerequisites:
For mobile
Unlocked bootloader, TWRP (Latest)(or some recovery based on twrp like shrp)
For PC
QPST and the requried qualcomm drivers which comes bundled with QPST , Minimal adb and fastboot
Files
OOS 9.0.6 , any android 10 based custom rom for which atleast someone has mentioned volte works on, A root option that you prefer
Make a complete back-up before proceeding.(Some say having a efi partition backup is good idk why I think it has the imei details and stuff)
1 . Flash OOS using twrp then Flash recovery (twrp) zip or img (Flashing OOS generally flashes back the default recovery)
2. Using the inbuild file explorer in twrp navigate to /system/etc/firmware/ and copy over the mbn_ota folder to your internal storage and move it over to your pc.
3. Flash the custom rom, gapps(if needed), root solution of your choice and boot up. Get the initial setup done and check if your network is working.
4. Enable adb and connect your phone to your computer.
5. Open up cmd in your minimal adb folder
and type in (or copy) what's given line by line:
adb shell
su
setprop sys.usb.config diag,serial_smd,rmnet_ipa,adb
(Or)
type in
su
setprop sys.usb.config diag,serial_smd,rmnet_ipa,adb
in a terminal within android (download from playstore or install using apk)
This will enable serial over usb needed for use with PDC until you change the state to mtp or tethering or restart
6. Open PDC(as admin if required) from the qpst folder.
7. Select the device. Check the links provided to find out how to enable profiles in PDC. From my experience you do not have to remove any profiles from your device using PDC.
8. If the required profile is not present then use the load option to load in the required .mbn file from what you had copied from oos previously. ( I used mcfg_sw_Airtel-Commercial.mbn for airtel ) and activate the profile.
9. Might not be required - To force enable Volte in your rom add these lines to the build.prop file
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
10. Reboot phone
Credits:
@ToucanSam
@dagoban
@jamal2367
@Drake97
Got stuck at PDC
I was successful in installing QPST and the device shows up in the Device Manager as a Qualcomm USB Modem connected to COM9. It even shows up in QPST config. But PDC shows no devices (even when run as Admin). Any help is appreciated . Thanks.
aperture22 said:
I was successful in installing QPST and the device shows up in the Device Manager as a Qualcomm USB Modem connected to COM9. It even shows up in QPST config. But PDC shows no devices (even when run as Admin). Any help is appreciated . Thanks.
Click to expand...
Click to collapse
Did you install the Qualcomm usb driver which came included in the QPST zip file.
I'm not sure if it is a problem with the qpst version ,I'm using QPST 2.7.480.
And once I run the command in adb shell I get my device to show up as Qualcomm USB Composite Device in device manager under the universal serial bus controllers category.
And if everything is working well , the pdc will not show anything when it opens up but you'll find your device in the drop down menu.
I have installed the same version. My device shows up in two places - under Modems and also under Ports (COM & LPT) as Qualcomm HS-USB Diadnostics 9091 (COM9). It's not showing up under USB controllers but. The PDC device list dropdown is still empty.
aperture22 said:
I have installed the same version. My device shows up in two places - under Modems and also under Ports (COM & LPT) as Qualcomm HS-USB Diadnostics 9091 (COM9). It's not showing up under USB controllers but. The PDC device list dropdown is still empty.
Click to expand...
Click to collapse
if still cant find it in dropdown list of PDC then
type in dialpad *#801# and select Full-port switch Turned ON and then reopen PDC as admin,
If you still face the issue try this link it has DRIVER + QPST + APK .zip
https://mega.nz/file/nmpj1KIa#DPbxR_raJu60uDqpch_waGKAM8FR-vdTRkPMuryIHrg
activate button is disabled even after running as admin
Gauravlonkar said:
activate button is disabled even after running as admin
Click to expand...
Click to collapse
To activate a profile: Right click on it and under setselectedconfig select sub0/sub1/both (try and check what works for you) and then you'll be able to click the activate button.
To deactivate select the sub under deactivate in the right click menu (or) just activate some other profile .
Do check the other xda forum posts related to this which i've provided links under reference, it might be helpful when you're stuck with something related to this .
the command after su doesn't do anything to my custom rom ....
prokiller1199 said:
the command after su doesn't do anything to my custom rom ....
Click to expand...
Click to collapse
I've tested it to work with luisrom,Havocos and some other rom I don't remember which one.
Running the command doesn't bring any popup or open up anything on the phone but you'll be able to see the change in the device manager of your pc.
The change caused by the command only persists till it is connected (ie. if you unplug nd replug the usb cable it will revert to the default state), until you change the state from the option provided in your notification (ie . something like from charging only to file transfer or tethering ect) and restart of the device.
Do also check if you have the correct drivers installed.
*deleted*
Finally got VoLTE on my Airtel SIM. Thanks for the detailed instructions and the necessary files.
aperture22 said:
Finally got VoLTE on my Airtel SIM. Thanks for the detailed instructions and the necessary files.
Click to expand...
Click to collapse
hello,
why in PDC shows no devices (even when run as Admin)? I have the same problem.
gammerboy said:
Disclaimer: I do not know the underlying working of what this procedure does. Just sharing what's working for me. I do not take responsibility for any problems which might arise from following this guide. Please proceed with caution.
I have tested this on the Oneplus 3t and only for airtel india. Please feel free to experiment and report for other carriers.
References:
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
https://forum.xda-developers.com/on...n-carriers-t3817542/post77874888#post77874888
https://github.com/edgd1er/voenabler
This guide will proceed assuming that Volte is working on OOS 9.0.6 for your carrier and does not work with the custom roms.
prerequisites:
For mobile
Unlocked bootloader, TWRP (Latest)(or some recovery based on twrp like shrp)
For PC
QPST and the requried qualcomm drivers which comes bundled with QPST , Minimal adb and fastboot
Files
OOS 9.0.6 , any android 10 based custom rom for which atleast someone has mentioned volte works on, A root option that you prefer
Make a complete back-up before proceeding.(Some say having a efi partition backup is good idk why I think it has the imei details and stuff)
1 . Flash OOS using twrp then Flash recovery (twrp) zip or img (Flashing OOS generally flashes back the default recovery)
2. Using the inbuild file explorer in twrp navigate to /system/etc/firmware/ and copy over the mbn_ota folder to your internal storage and move it over to your pc.
3. Flash the custom rom, gapps(if needed), root solution of your choice and boot up. Get the initial setup done and check if your network is working.
4. Enable adb and connect your phone to your computer.
5. Open up cmd in your minimal adb folder
and type in (or copy) what's given line by line:
adb shell
su
setprop sys.usb.config diag,serial_smd,rmnet_ipa,adb
(Or)
type in
su
setprop sys.usb.config diag,serial_smd,rmnet_ipa,adb
in a terminal within android (download from playstore or install using apk)
This will enable serial over usb needed for use with PDC until you change the state to mtp or tethering or restart
6. Open PDC(as admin if required) from the qpst folder.
7. Select the device. Check the links provided to find out how to enable profiles in PDC. From my experience you do not have to remove any profiles from your device using PDC.
8. If the required profile is not present then use the load option to load in the required .mbn file from what you had copied from oos previously. ( I used mcfg_sw_Airtel-Commercial.mbn for airtel ) and activate the profile.
9. Might not be required - To force enable Volte in your rom add these lines to the build.prop file
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
10. Reboot phone
Credits:
@ToucanSam
@dagoban
@jamal2367
@Drake97
Click to expand...
Click to collapse
Sir can u make a total video tutorials so that we can easly understand because i just confuse what shuld i insta 8n pc and what shuld instal in mobile
---------- Post added at 07:55 AM ---------- Previous post was at 07:52 AM ----------
ronaksworld said:
if still cant find it in dropdown list of PDC then
type in dialpad *#801# and select Full-port switch Turned ON and then reopen PDC as admin,
If you still face the issue try this link it has DRIVER + QPST + APK .zip
https://mega.nz/file/nmpj1KIa#DPbxR_raJu60uDqpch_waGKAM8FR-vdTRkPMuryIHrg
Click to expand...
Click to collapse
Sir in this zip file their two apk file but that not installed in my phone can u tell me which one shuld i instal in pc and phone step by step plz
Tried to enable VoLTE & VoWIFI on my Redme 9 Pro, using the PDC and can actually get the VoWIFI works. However, once the device reboot, it just fall back to the ROW_Commercial profile and have to redo again to get it work.
Can anyone help with this issue?
Thans for your support
I'm also trying to activate VoLTE on my oneplus3t. But stuck in loading a .MBN file in the PDC tool. When I click the load button and select the .MBN file to open nothing happens.

Categories

Resources