Related
please help me,after i do app2sd,my phone restart,i tought the app2sd was sucess,but after that my phone cant read the sdcard,i've tried to replace the sdcard with other sdcard,but it still cant detect the sdcard...
and then i think maybe if i flash it,it will recover,but when i connect my phone to my pc,it only charges but my phone cant detect the usb connection...
i've tried to hard reset it,but its still the same...
can somebody tell me what to do?
thanks and sorry if my english is bad
Go to device manager and deactivate LGE Virtual Modem and try to see if your computer recognize the phone
Same damn thing happened to me after trying to install app2sd. i enable usb debugging but i dont get a response in the notifacation bar to say its active. I tried to reflash with the baltic firmware but the KDZ_FW_UPD.exe doesn't see my device (i know i've got the right drivers installed btw). I also can't download any apps from the marketplace over wifi or mobile network(which i don't think is working either).i disabled the lge modem and it still doesn't recognise it. HELP, PLEASE.
Which version of windows are you using?
Try put your phone into download recovery mode, then go to KDZ update tool and select emergency from the drop down box at the top right of the window.
Now flash the rom and it should work.
Jesus H. Christ that was a quick reply, thanks. I'm running win 7 and i'm still a bit of a noob, how do i put the phone into recovery?
k1nk33 said:
Jesus H. Christ that was a quick reply, thanks. I'm running win 7 and i'm still a bit of a noob, how do i put the phone into recovery?
Click to expand...
Click to collapse
try vol down and camera.
flyboyovyick said:
try vol down and camera.
Click to expand...
Click to collapse
From the homescreen , during boot or when connected to pc? . sorry for my ignorance.
i've gotten into download mode, so i'll get back as soon as i've any more info.
k1nk33 said:
From the homescreen , during boot or when connected to pc? . sorry for my ignorance.
Click to expand...
Click to collapse
http://xat.com/XDAdevelopers
join this chat so i can help you easyier
chronoz9 said:
please help me,after i do app2sd,my phone restart,i tought the app2sd was sucess,but after that my phone cant read the sdcard,i've tried to replace the sdcard with other sdcard,but it still cant detect the sdcard...
and then i think maybe if i flash it,it will recover,but when i connect my phone to my pc,it only charges but my phone cant detect the usb connection...
i've tried to hard reset it,but its still the same...
can somebody tell me what to do?
thanks and sorry if my english is bad
Click to expand...
Click to collapse
Hey, got mine sorted out, you need to deactivate the LG modem in device manager first then put your phone into download mode ( hold vol down as you power up the device and you should see DOWNLOAD MODE ). Then just reflash with KDZ update tool. The percentage bar never moved from 0 for me but , after about 15 mins, my phone rebooted i just unplugged and everything seems ok. The phone mounted the sd card and usb debugging now shows in the notification area.
P.S.
You may have to enable mass storage on the phone for this to work just can't remember if i did or not so try it both ways i.e. turn on mass storage and try flash and if that doesn't work turn it off and try again.
Hope this helps.
Oh, and a big thanks to 'flyboyovyick' for his help on this, Cheers man.
k1nk33 said:
Oh, and a big thanks to 'flyboyovyick' for his help on this, Cheers man.
Click to expand...
Click to collapse
hey thanks,
i guess everything is working then?
yeah , pretty much, few little problems but not the disaster i thought it was. tnx.
Hello friends,
I'm new to android, and tried to install app2sd, but the attempt was not recognized sdcard.
After that I was somehow trying to fix it using FlashTool (http://forum.xda-developers.com/showthread.php?t=920746), but after I used the "Optimize" the program and then restarted the phone is still only in the text "Sony Ericsson".
I've tried reset, hard reset, remove battery, but nothing worked until now.
Has anyone experienced this? Or know how to solve? Therefore only used the phone for 2 days and managed to catch it!
PS: Sorry if anything in the text does not make sense because I used the google translator to communicate.
Thanks!
use SEUS or pc companion to repair
I've tried using the PC companion and I returned that has no update to be done.
I used adb logcat and found that the boot goes in a loop whenever he gets in this command:
D/AudioHardwareMSM72XX( 4911): setVoiceVolume(1.000000)
With that you know what I should do?
http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en
Man, I've downloaded this file, says that when I install the software already installed is the latest.
When I turn on the phone, no button works to turn off it, only removing the battery.
use SEUS, it will repair ur phone in off state..
haomaster said:
Man, I've downloaded this file, says that when I install the software already installed is the latest.
When I turn on the phone, no button works to turn off it, only removing the battery.
Click to expand...
Click to collapse
anyway you can reinstall firmware.
1. Take phone battery off.
2. Connect USB to computer, than to phone.
3. Press and HOLD back button
4. Insert the battery
5. Let go the back button (release)
kiz1983 said:
use SEUS, it will repair ur phone in off state..
Click to expand...
Click to collapse
Man :| its seus:
k3ksik said:
http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en
Click to expand...
Click to collapse
Thank you to everyone who helped me! I managed to circumvent the problem by using FlashTool 0.2.6 firmware with generic.
Thanks!
haomaster said:
Hello friends,
I'm new to android, and tried to install app2sd, but the attempt was not recognized sdcard.
After that I was somehow trying to fix it using FlashTool (http://forum.xda-developers.com/showthread.php?t=920746), but after I used the "Optimize" the program and then restarted the phone is still only in the text "Sony Ericsson".
I've tried reset, hard reset, remove battery, but nothing worked until now.
Has anyone experienced this? Or know how to solve? Therefore only used the phone for 2 days and managed to catch it!
PS: Sorry if anything in the text does not make sense because I used the google translator to communicate.
Thanks!
Click to expand...
Click to collapse
Hello,
i have the same problem, after click in the option "Optimize", the mobile was restarted.
the only thing that appears is the SE Logo.
Can anyone help me, please?
Thanks
ShinobiPT said:
Hello,
i have the same problem, after click in the option "Optimize", the mobile was restarted.
the only thing that appears is the SE Logo.
Can anyone help me, please?
Thanks
Click to expand...
Click to collapse
See above, or see this post of this topic.
(Instructions how to repair the problem with PC Companion)
Thank you....
I will test again, root the SE and install a Room.
Thanks.....
I had that problem, stuck on SE logo, i waited a few minutes, and then the phone started.
problem big problem
please help
my pc does not recognize x8 I tried to update but the PCC is to update a half turn and stopped off.when it just turn on Vibrate.
just dead.
zakulaa said:
please help
my pc does not recognize x8 I tried to update but the PCC is to update a half turn and stopped off.when it just turn on Vibrate.
just dead.
Click to expand...
Click to collapse
Charge your phone (not plugged into usb on computer) for at least 4 hrs.. Then try again..
thanks:good:
---------- Post added at 01:24 PM ---------- Previous post was at 12:43 PM ----------
how to enable debugging mode when my phone wont turn on.
So Orange are supposed to be pushing the 7392 update tomorrow. I have the 4.10.1.9 bad bootloader so am not expecting the update to install however i read here that a few people on 4.10.1.9 were able to do so.
My question is if i try and install and it gets stuck in the reboot loop, what is the correct procedure to abort the update?
Disconnect the cable then pull the battery and reboot? Just pull the battery?
And will i need to recover it at all via zune or will the update just fail and when i reboot the phone it will be ok?
Thanks!
Freypal said:
So Orange are supposed to be pushing the 7392 update tomorrow. I have the 4.10.1.9 bad bootloader so am not expecting the update to install however i read here that a few people on 4.10.1.9 were able to do so.
My question is if i try and install and it gets stuck in the reboot loop, what is the correct procedure to abort the update?
Disconnect the cable then pull the battery and reboot? Just pull the battery?
And will i need to recover it at all via zune or will the update just fail and when i reboot the phone it will be ok?
Thanks!
Click to expand...
Click to collapse
I'm on Orange too but so far no update
Freypal said:
So Orange are supposed to be pushing the 7392 update tomorrow. I have the 4.10.1.9 bad bootloader so am not expecting the update to install however i read here that a few people on 4.10.1.9 were able to do so.
My question is if i try and install and it gets stuck in the reboot loop, what is the correct procedure to abort the update?
Disconnect the cable then pull the battery and reboot? Just pull the battery?
And will i need to recover it at all via zune or will the update just fail and when i reboot the phone it will be ok?
Thanks!
Click to expand...
Click to collapse
The update will just fail once it realised it's booted up again into the OS. Just disconnect and pull the battery. Once you put it back in, it should boot up fine. Connect the cable once again and Zune should say it's failed applying the update.
I'm on Three and still can't get past this issue, even with the Samsung fix.
That's annoying to hear
I suppose you have tried the usual steps of freeing up lots of space on your device and using different USB ports... ?
Then the annoying step of a hard reset?
I pre-emptively applied the Samsung patch as i did not want to be stuck in a boot loop! I don't suppose anyone knows what it actually does? I'm guessing since it only takes like 10 seconds to patch it is just overwriting a possibly faulty file in the phone somewhere that should prevent the update from finishing.
I'm still on 7008! did ya'll get the update?? Or did you all update to nodo post april 11?
comeradealexi said:
I'm still on 7008! did ya'll get the update?? Or did you all update to nodo post april 11?
Click to expand...
Click to collapse
Apparently us poor sods on Orange aren't getting 7392 anytime soon.
http://windowsteamblog.com/windows_phone/b/windowsphone/archive/2011/05/25/more-7392-update-deliveries-underway.aspx
"7392 is now rolling out to Windows Phones on Sprint in the U.S. and Orange in Europe. If you have an Omnia 7 on Orange, you won’t be receiving an update just yet. We are going to update those phones separately."
God knows what that means. Really pissed off about it.
Grrrrr ¬¬ it has been a mahusive **** up the whole NoDo update! they really need to get Mango perfect!
Yup. Really frustrating isn't it!
Freypal said:
Yup. Really frustrating isn't it!
Click to expand...
Click to collapse
Turn off your phone.
Keep holding down the camera button and turn on your phone. If you see the USB to PC mode, your phone will be able to update.
Zune only requires that your phone be able to enter USB to PC download mode(Camera+PowerOn) and not the other Download mode (VolumeUp+Camera+PowerOn).
VoodooKing said:
Turn off your phone.
Keep holding down the camera button and turn on your phone. If you see the USB to PC mode, your phone will be able to update.
Zune only requires that your phone be able to enter USB to PC download mode(Camera+PowerOn) and not the other Download mode (VolumeUp+Camera+PowerOn).
Click to expand...
Click to collapse
That's interesting... Just tried it and my phone does enter the connect to PC mode.
I do have the bad bootloader 4.10.1.9 however i Jigged mine using 301k resistors and installed the Samsung patch so I don't know if this has anything to do with it. No one seems to know what the patch actually does :s
This is good news though! Thanks for the heads up.
VoodooKing said:
Turn off your phone.
Keep holding down the camera button and turn on your phone. If you see the USB to PC mode, your phone will be able to update.
Zune only requires that your phone be able to enter USB to PC download mode(Camera+PowerOn) and not the other Download mode (VolumeUp+Camera+PowerOn).
Click to expand...
Click to collapse
did this, came up saying "restoration error" :s but it wouldnt let me scan for updates so didnt work
Freypal said:
That's interesting... Just tried it and my phone does enter the connect to PC mode.
I do have the bad bootloader 4.10.1.9 however i Jigged mine using 301k resistors and installed the Samsung patch so I don't know if this has anything to do with it. No one seems to know what the patch actually does :s
This is good news though! Thanks for the heads up.
Click to expand...
Click to collapse
The Samsung patch is supposed to fix phones that cannot enter USB > PC download mode. But it doesn't work for some, that is why during Zune patching process, the phone will enter rebooting loop at step 6 because it is trying to enter USB > PC download mode.
If yours is working fine now, you don't have to worry.
VoodooKing said:
The Samsung patch is supposed to fix phones that cannot enter USB > PC download mode. But it doesn't work for some, that is why during Zune patching process, the phone will enter rebooting loop at step 6 because it is trying to enter USB > PC download mode.
If yours is working fine now, you don't have to worry.
Click to expand...
Click to collapse
Ahh right, thanks again. So I guess the lack of being able to enter download mode without the resistor jig is another side effect of this bad bootloader. And without this ability the Samsung patch cannot be applied and the update cannot subsequently complete and update the bad software.
The update from 7008 isnt even available yet though?
comeradealexi said:
The update from 7008 isnt even available yet though?
Click to expand...
Click to collapse
I went from 7008 to 7390 before it was pulled a month or so ago.
For Orange customers though, No it isn't available yet.
Ahh right fair enough, yea i did the same but phone broke and got a replacement but just waiting for nodo update now!
comeradealexi said:
Ahh right fair enough, yea i did the same but phone broke and got a replacement but just waiting for nodo update now!
Click to expand...
Click to collapse
I have to say I would rather them just get the issues with the Omnia sorted and out the way now. I don't really care about receiving 7392 as it adds little / nothing.
If Mango is delayed or Omnia owners i will be infuriated though.
Yes definatley!! The mango update HAS to be smooth because Nodo has been a disaster...
Freypal said:
Ahh right, thanks again. So I guess the lack of being able to enter download mode without the resistor jig is another side effect of this bad bootloader. And without this ability the Samsung patch cannot be applied and the update cannot subsequently complete and update the bad software.
Click to expand...
Click to collapse
No. If your phone can enter USB > PC download mode, Microsoft can choose to fix your bad bootloader through Zune.
Tmobile Omnia 7 users have had their phone firmware upgraded in through Zune.
As long as your phone can enter USB > PC download mode, do not do anything to the phone.
Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.
Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:
Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.
Hi all,
When i attempt to switch the wifi ON in my Lumia 950 i got this error pop up "Can't do this right now. Try again in little while. If the problem continues, restart your phone and try again."
Has any one knows how to solve this issue?
I have searched in internet but most of them suggest to do hard reset which i did. But the problem still persist.
I did even reflash with WDRT but the problem persist. Do hard reset after flashing also did not solve the problem either.
Background history, i was unlocking bootloader of this phone using windowsphone internal 2.8 and fail. My Lumia 950 then got stuck at flashing mode. After play around with it between WPI and WDRT the battery got drain and the phone unable to recognize correct battery voltage anymore cause my Lumia 950 stuck at reboot loop with Microsoft logo.
Eventually i managed to recover my Lumia 950 using Thor2 commands. The phone is now function normal but still carry the same problem which is wifi can not be turned ON.
Apreciate if anyone here have any suggestion to solution.
Thanks
b3herys said:
Hi all,
When i attempt to switch the wifi ON in my Lumia 950 i got this error pop up "Can't do this right now. Try again in little while. If the problem continues, restart your phone and try again."
Has any one knows how to solve this issue?
I have searched in internet but most of them suggest to do hard reset which i did. But the problem still persist.
I did even reflash with WDRT but the problem persist. Do hard reset after flashing also did not solve the problem either.
Background history, i was unlocking bootloader of this phone using windowsphone internal 2.8 and fail. My Lumia 950 then got stuck at flashing mode. After play around with it between WPI and WDRT the battery got drain and the phone unable to recognize correct battery voltage anymore cause my Lumia 950 stuck at reboot loop with Microsoft logo.
Eventually i managed to recover my Lumia 950 using Thor2 commands. The phone is now function normal but still carry the same problem which is wifi can not be turned ON.
Apreciate if anyone here have any suggestion to solution.
Thanks
Click to expand...
Click to collapse
I am no expert and it's been a loooooooonggg time since I've done anything to my Lumia except use it like a phone, but I think the driver for WIFI is blown. May be you can get one of the devs to send you the drivers for WiFi. Or even better, if you can revert the device to its original state.
I have a plan B for you: Flash Windows 10 ROM with Working WiFi on it.
Edit 1: https://answers.microsoft.com/en-us...ight-now/2875d3e0-7810-4a7c-9f78-c05a5d14961a
Tip:
Another suggestion would be to try using Lumia Software Recovery Tool, please have a look at the following page for more information:
http://www.microsoft.com/en-gb/mobile/support/faq/?action=singleTopic&topic=FA142987
Hope this helps.
Hi Whiteqode,
Thank you for replying.
I under impression that once we load the fresh ROM, the mobile phone should be at original state therefore all drivers should have been loaded. Am I mistaken?
If the driver has not being refresh after flashing, how can i load the driver manually? First of all how can i obtain the driver?
Has any one in here knows how to get one?
Regards,
b3herys said:
Hi Whiteqode,
Thank you for replying.
I under impression that once we load the fresh ROM, the mobile phone should be at original state therefore all drivers should have been loaded. Am I mistaken?
If the driver has not being refresh after flashing, how can i load the driver manually? First of all how can i obtain the driver?
Has any one in here knows how to get one?
Regards,
Click to expand...
Click to collapse
you are right. the drivers need to be either baked into the OS or need to be flashed BEFORE the ROM is flashed. My sincere apologies as I dont think I am capable of helping you. You can try the link though, the Software Recovery Tool. May be it will flash back the required drivers and you can wait till you have the drivers you need.
Edit 1: How about this link -
https://forum.xda-developers.com/lu...suscitando-seu-lumia-950-xl-nao-liga-t3853587