Database Users

[Q] Please help,urgent...my optimus cant detect sdcard and usb connection

please help me,after i do app2sd,my phone restart,i tought the app2sd was sucess,but after that my phone cant read the sdcard,i've tried to replace the sdcard with other sdcard,but it still cant detect the sdcard...
and then i think maybe if i flash it,it will recover,but when i connect my phone to my pc,it only charges but my phone cant detect the usb connection...
i've tried to hard reset it,but its still the same...
can somebody tell me what to do?
thanks and sorry if my english is bad

Go to device manager and deactivate LGE Virtual Modem and try to see if your computer recognize the phone

Same damn thing happened to me after trying to install app2sd. i enable usb debugging but i dont get a response in the notifacation bar to say its active. I tried to reflash with the baltic firmware but the KDZ_FW_UPD.exe doesn't see my device (i know i've got the right drivers installed btw). I also can't download any apps from the marketplace over wifi or mobile network(which i don't think is working either).i disabled the lge modem and it still doesn't recognise it. HELP, PLEASE.

Which version of windows are you using?
Try put your phone into download recovery mode, then go to KDZ update tool and select emergency from the drop down box at the top right of the window.
Now flash the rom and it should work.

Jesus H. Christ that was a quick reply, thanks. I'm running win 7 and i'm still a bit of a noob, how do i put the phone into recovery?

k1nk33 said:
Jesus H. Christ that was a quick reply, thanks. I'm running win 7 and i'm still a bit of a noob, how do i put the phone into recovery?
Click to expand...
Click to collapse
try vol down and camera.

flyboyovyick said:
try vol down and camera.
Click to expand...
Click to collapse
From the homescreen , during boot or when connected to pc? . sorry for my ignorance.

i've gotten into download mode, so i'll get back as soon as i've any more info.

k1nk33 said:
From the homescreen , during boot or when connected to pc? . sorry for my ignorance.
Click to expand...
Click to collapse
http://xat.com/XDAdevelopers
join this chat so i can help you easyier

chronoz9 said:
please help me,after i do app2sd,my phone restart,i tought the app2sd was sucess,but after that my phone cant read the sdcard,i've tried to replace the sdcard with other sdcard,but it still cant detect the sdcard...
and then i think maybe if i flash it,it will recover,but when i connect my phone to my pc,it only charges but my phone cant detect the usb connection...
i've tried to hard reset it,but its still the same...
can somebody tell me what to do?
thanks and sorry if my english is bad
Click to expand...
Click to collapse
Hey, got mine sorted out, you need to deactivate the LG modem in device manager first then put your phone into download mode ( hold vol down as you power up the device and you should see DOWNLOAD MODE ). Then just reflash with KDZ update tool. The percentage bar never moved from 0 for me but , after about 15 mins, my phone rebooted i just unplugged and everything seems ok. The phone mounted the sd card and usb debugging now shows in the notification area.
P.S.
You may have to enable mass storage on the phone for this to work just can't remember if i did or not so try it both ways i.e. turn on mass storage and try flash and if that doesn't work turn it off and try again.
Hope this helps.

Oh, and a big thanks to 'flyboyovyick' for his help on this, Cheers man.

k1nk33 said:
Oh, and a big thanks to 'flyboyovyick' for his help on this, Cheers man.
Click to expand...
Click to collapse
hey thanks,
i guess everything is working then?

yeah , pretty much, few little problems but not the disaster i thought it was. tnx.

[Q] I cant turn on my X10 - problem after framework app

Hi, I have problem with my phone. I used framework (i changed menu color and status bar), everything was ok during instalation,but then when the phone restart, I couldn´t turn on. So I tried lot of combinations, example: hold back button, phone turn on, but I saw only Sony Ericsson, I couldn´t swith off phone. Only help me if I took out battery. Then I tried put in battery, connect us to pc and press button back both button home and then power. But I saw again Sony Ericsson and then I saw logo battery charge. What I have to do? Pls help. Thx

david|cz said:
But I saw again Sony Ericsson and then I saw logo battery charge. What I have to do? Pls help. Thx
Click to expand...
Click to collapse
Reflashing is your only option.

XperiaX10iUser said:
Reflashing is your only option.
Click to expand...
Click to collapse
Ok, but tell me how? If I cant turn on and reflashing via SEUS? My phone is still off..

david|cz said:
Ok, but tell me how? If I cant turn on and reflashing via SEUS? My phone is still off..
Click to expand...
Click to collapse
Install SEUS, run it, and follow the instructions, if it says you're upto date run it anyway.

XperiaX10iUser said:
Install SEUS, run it, and follow the instructions, if it says you're upto date run it anyway.
Click to expand...
Click to collapse
But I have SEUS and I did it. But if I press repair, so SEUS want to connect my phone, but I cant connect, my phone is still off, I see only Sony Ericsson on display and then freeze.. And I did all what SEUS want from me.

david|cz said:
but I cant connect, my phone is still off,
Click to expand...
Click to collapse
It needs to be off to put it into flash mode, as stated when you run SEUS.

If you are using firmware from your phone retailer you can Download PC companion on Sonyericssion website, install it on your computer, click update on Pc Companion then you see the hyperlink "click if your phone has problem" or something like that, click to repair your phone than follow the instruction. However, if you using firmware from internet such as nordic, global, you have to download firmware in here http://forum.xda-developers.com/showthread.php?t=683793 then reflash your phone. to reflash your phone. download firmware, extract to your computer, run flash.batch then follow the instruction. then connect your phone on flash mode by connect cable to pc, hold back button and connect cable to your phone, press any key on your computer then press back button, after everything done you can restart

truongtho039 said:
However, if you using firmware from internet such as nordic, global, you have to download firmware in here http://forum.xda-developers.com/showthread.php?t=683793 then reflash your phone.
Click to expand...
Click to collapse
No you dont, seus or PCC will reflash whatever fw you're using back on the phone.
Sent from my X10i using XDA App

No that's not. in this case PCC will give you a message that your phone already have latest version, and you can't repair it

truongtho039 said:
No that's not. in this case PCC will give you a message that your phone already have latest version, and you can't repair it
Click to expand...
Click to collapse
I can clik on repair and I do all what SEUS write me, but everytime I freeze, when SEUS want from me, disconnect cable, switch off phone, wait 5sec and then connect phone a hold button back. I did, but I still see logo battery charge.

[Q] x2 frozen screen

I tried to insert the English language in my x2 and in addition there was an error and now when fallen tel. can not do anything because the display remains FROZEN at the logo-Sony-Ericsoon.
Nothing helps what now?
I tried via SEUS and says that everything is ok but can I install it again even though he says he has done the last update?
How do I run Windows? help !!!!!!!!!!!!!

danijel021 said:
I tried to insert the English language in my x2 and in addition there was an error and now when fallen tel. can not do anything because the display remains FROZEN at the logo-Sony-Ericsoon.
Nothing helps what now?
I tried via SEUS and says that everything is ok but can I install it again even though he says he has done the last update?
How do I run Windows? help !!!!!!!!!!!!!
Click to expand...
Click to collapse
turn off the device and remove the battery and sim card, wait 10 minutes then reinstall the batteries alone. after that make sure the device is in bootloader mode and flash again
I hope this helps

I've tried them all but nothing not help!
I read all the forums and did not find the answers.
A lot of people have this problem but nobody gives a solution, the phone is not responding-not to enter the bootloader!does not help one key combination, I think that somehow got into a phone via USB cable and using computers but do not know how?

danijel021 said:
I've tried them all but nothing not help!
I read all the forums and did not find the answers.
A lot of people have this problem but nobody gives a solution, the phone is not responding-not to enter the bootloader!does not help one key combination, I think that somehow got into a phone via USB cable and using computers but do not know how?
Click to expand...
Click to collapse
I want to know how you get into the bootloader menu ??

maybe I wrote something wrong (because of my poor English) but I have not entered the bootlodar, nothing to do with all possible combinations tasters!

danijel021 said:
maybe I wrote something wrong (because of my poor English) but I have not entered the bootlodar, nothing to do with all possible combinations tasters!
Click to expand...
Click to collapse
you should look at http://forum.xda-developers.com/showthread.php?t=630816&page=2

any other solutions?

have you tried this solution?
remove battery ... wait for 5 seconds ... turn on the phone and quickly click (windows button + "o" button) on keyboard
a white menu will appear with 3 options
you will press "w" then "windows button" to confirm

nothing!!!!
Xperia is dead????
Only in garbage!?

have you ever tried to give commands through MTTY on the device..??

No,how?
Please explain

danijel021 said:
No,how?
Please explain
Click to expand...
Click to collapse
just look at http://forum.xda-developers.com/showthread.php?t=371154&page=5
try practicing on your device, hopefully it helps

I took the phone in service and did not do anything, just say the phone can not enter bootloader menu.
What now?

how to fix a bricked phone.

How do i rescue my bricked phone!
Click to expand...
Click to collapse
well the answer lies within this thread.
how do you brick a phone
well, there are many ways you can brick a phone.​1. you install the wrong software
2.you install a 'broken' rom
3. you install a recovery that isnt supported for our phone
4.or you were messing with your bootloader
etc etc... you get the point
how to rescue a bricked x8​1st: If you have done a soft brick then you can boot into xrecovery and restore your latest backup. easy
2:if restoring doesn'twork or you have a hard brick then you should either launch:SEUS (sony ericsson update service) or pc companion. click update and follow the steps.
3:if none of that works then you will have to send it off to se. if you dont get some kind of phone company to fix it then its as useless as a real brick lol or a replica of a phone.
3:you can use a flashtool to fix it as well. if you open flashtool you usally get a number of options such as unlock bootloader etc. there should be an option where you can restore it. (lol i think)
Cheers​i hope it helped. if it did then please do press the thanks button.
-wilbso​

Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.

Chris95X8 said:
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Click to expand...
Click to collapse
ok. besides the complete brick is what i call doomsday. thats just my own little thing lol. and yes i will metion 'bout' the flashtool too

how about hard brick??

X8
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7

montekristo said:
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
Click to expand...
Click to collapse
Quite a few people repaired their phones with s1 tool. Iv never actually hard bricked my phone. IV done soft brick> bootloop but I fixed that be restoring a backed in xrecovery so these replies I
Getting are quite helpful. As long as your phone is repaired everything is alright.
sent from my x8 running gingerdx

Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?

benga_mircea said:
I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
Click to expand...
Click to collapse
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.

B.Jay said:
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
Click to expand...
Click to collapse
how did you get this thread back up?
Sent from my X8 using XDA App

wilbso said:
how did you get this thread back up?
Click to expand...
Click to collapse
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*

Thank you for your help, but I can't acces flash mode or fastboot mode again, lika I use to, after I connect the batery, push the back button, insert the usb, a few seconds and the "sony ericsson" screen pops up again and stays blocked. I think I've killed my phone

Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?

B.Jay said:
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Click to expand...
Click to collapse
Where did you find it? I mean where did boy find the thread? My Sig? Looking through old posts?
Sent from my X8 using XDA App

B.Jay said:
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
Click to expand...
Click to collapse
Thanks! I tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:43 PM ---------- Previous post was at 11:24 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)

benga_mircea said:
The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story!
Click to expand...
Click to collapse
Whoa... that's what I call a "security vulnerability".
If the flash process got interrupted because your lil bro pulled the USB cable I'm somewhat certain the NAND is messed up pretty good - no wonder you're stuck at the SE boot logo.
If there's no way by which you can get the device back to normal (read: even the guys over in the Neo sub-board are out of ideas/help) I think your best shot would be to send it in to SE for repair if you still got warranty. SE should have other means to resurrect the device and slap it back into shape.
I'm sorry I can't really help you here with this - the Neo is different from the X8 and also different from the way my tablets work.

Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!

benga_mircea said:
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
Click to expand...
Click to collapse
Well, on my Samsung, which has Fastboot, I first enter Fastboot and from there I put the device into download mode for flashing (in theory you can compare "Download mode" to the "Flash mode" - in Flash mode the W/X8 awaits a ROM image to be flashed into the NAND, pretty much the same as "Download mode" works).
Since your Neo isn't completely dead (you just have a shot system due to the flash interruption) you only need to find a way how you can re-write the system.
I lack the time to research how the Neo works, but I think there should be a way to get the device going as you can even "resurrect" a W/X8 where you formatted the system partition (by mistake in CWM, for example). However, that's not as bad as interrupting the USB connection but about the same "ooops" to blank the system.

Flash mode not working, fastboot not workingI Tried a lot of programs (wotan, flash tool, fota unbrick tool, octopus, omnius for se, pc companion, se update. Non of them manages to connect to my phone. If only I could connect for 1 sec. I have a backup of TA, but I can flash it. Thanks anyway!

is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me

NarutoDroid said:
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
Click to expand...
Click to collapse
yes 11W30 or below should unlock fine but for me 11W33 also no problem
Sent from my E15i using xda premium

Help i totally bricked my lg g2 :(

Phone fixed, please delete the thread.

3S0PHAGOOS said:
I changed my ROM from stock to 4.4.2 ROM but I got so many issues so changed back to stock ROM, but my LG G2 only has now only 10gb of internal memory.. [I got 32gb lg g2] Now, i tried the instruction from the guy here
http://forum.xda-developers.com/showthread.php?t=2470207&page=3
and also this
http://forum.cyanogenmod.com/topic/...s-on-internal-storage/page__st__20#entry67870
I tried to do the steps as instructed but the result is not the same as mine and then i just exit ADB... then i restart my phone and booomm...
my phone died can't on at all even on download mode... when i try download mode it's just USB Not recognize... please help me ((((
Click to expand...
Click to collapse
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.

nimrodsv said:
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.
Click to expand...
Click to collapse
didn't work, as expected

3S0PHAGOOS said:
didn't work, as expected
Click to expand...
Click to collapse
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input

nimrodsv said:
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input
Click to expand...
Click to collapse
I can't flash anymore, My LG G2 is completely dead, can't get into recovery and download mode, if I tried going to download my pc just say "USB NOT RECOGNIZED"

I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476

Xyriin said:
I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
did your phone totally bricked when you did it? or you can still go to the download mode?
cause mine is totally can't on.

Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:

If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.

hiddenfive said:
Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:
Click to expand...
Click to collapse
My phone is completely off
ceredics said:
If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.
Click to expand...
Click to collapse
I have the D802, I already installed the drivers.
If I'm going to go to download mode, It says USB not Recognized and my phone is completely off.

I don't have too much experience with that model so hopefully someone else spying has more information. Sorry buddy.

There is no bootlogo at all? Not even when you turn it on? Try plugging it into a wall charger and if anything happens, also try changing your COM # to 41, if it isn't its Device Manager<Ports (COM & LPT), right click< properties< port settings< advanced..< COM 41, this was from this article I will link right here: http://forum.xda-developers.com/showthread.php?t=2582142
Hope this helps :good:

@3S0PHAGOOS how you did the fix?

cpaixao said:
@3S0PHAGOOS how you did the fix?
Click to expand...
Click to collapse
yes please enlighten us....I am going through the same process and I can not turn it on at all. NOthing comes on...

Send it to me, but if I fix it I get to keep the phone. Right?
Sent from my SM-T210R using XDA Premium 4 mobile app

3S0PHAGOOS said:
Phone fixed, please delete the thread.
Click to expand...
Click to collapse
How did you fix it?

Those experiencing this problem could try this
https://www.youtube.com/watch?v=E7zbs6of_4I
Btw, you should share the solution for those who are in the same situation.