I tried to insert the English language in my x2 and in addition there was an error and now when fallen tel. can not do anything because the display remains FROZEN at the logo-Sony-Ericsoon.
Nothing helps what now?
I tried via SEUS and says that everything is ok but can I install it again even though he says he has done the last update?
How do I run Windows? help !!!!!!!!!!!!!
danijel021 said:
I tried to insert the English language in my x2 and in addition there was an error and now when fallen tel. can not do anything because the display remains FROZEN at the logo-Sony-Ericsoon.
Nothing helps what now?
I tried via SEUS and says that everything is ok but can I install it again even though he says he has done the last update?
How do I run Windows? help !!!!!!!!!!!!!
Click to expand...
Click to collapse
turn off the device and remove the battery and sim card, wait 10 minutes then reinstall the batteries alone. after that make sure the device is in bootloader mode and flash again
I hope this helps
I've tried them all but nothing not help!
I read all the forums and did not find the answers.
A lot of people have this problem but nobody gives a solution, the phone is not responding-not to enter the bootloader!does not help one key combination, I think that somehow got into a phone via USB cable and using computers but do not know how?
danijel021 said:
I've tried them all but nothing not help!
I read all the forums and did not find the answers.
A lot of people have this problem but nobody gives a solution, the phone is not responding-not to enter the bootloader!does not help one key combination, I think that somehow got into a phone via USB cable and using computers but do not know how?
Click to expand...
Click to collapse
I want to know how you get into the bootloader menu ??
maybe I wrote something wrong (because of my poor English) but I have not entered the bootlodar, nothing to do with all possible combinations tasters!
danijel021 said:
maybe I wrote something wrong (because of my poor English) but I have not entered the bootlodar, nothing to do with all possible combinations tasters!
Click to expand...
Click to collapse
you should look at http://forum.xda-developers.com/showthread.php?t=630816&page=2
any other solutions?
have you tried this solution?
remove battery ... wait for 5 seconds ... turn on the phone and quickly click (windows button + "o" button) on keyboard
a white menu will appear with 3 options
you will press "w" then "windows button" to confirm
nothing!!!!
Xperia is dead????
Only in garbage!?
have you ever tried to give commands through MTTY on the device..??
No,how?
Please explain
danijel021 said:
No,how?
Please explain
Click to expand...
Click to collapse
just look at http://forum.xda-developers.com/showthread.php?t=371154&page=5
try practicing on your device, hopefully it helps
I took the phone in service and did not do anything, just say the phone can not enter bootloader menu.
What now?
Related
please help me,after i do app2sd,my phone restart,i tought the app2sd was sucess,but after that my phone cant read the sdcard,i've tried to replace the sdcard with other sdcard,but it still cant detect the sdcard...
and then i think maybe if i flash it,it will recover,but when i connect my phone to my pc,it only charges but my phone cant detect the usb connection...
i've tried to hard reset it,but its still the same...
can somebody tell me what to do?
thanks and sorry if my english is bad
Go to device manager and deactivate LGE Virtual Modem and try to see if your computer recognize the phone
Same damn thing happened to me after trying to install app2sd. i enable usb debugging but i dont get a response in the notifacation bar to say its active. I tried to reflash with the baltic firmware but the KDZ_FW_UPD.exe doesn't see my device (i know i've got the right drivers installed btw). I also can't download any apps from the marketplace over wifi or mobile network(which i don't think is working either).i disabled the lge modem and it still doesn't recognise it. HELP, PLEASE.
Which version of windows are you using?
Try put your phone into download recovery mode, then go to KDZ update tool and select emergency from the drop down box at the top right of the window.
Now flash the rom and it should work.
Jesus H. Christ that was a quick reply, thanks. I'm running win 7 and i'm still a bit of a noob, how do i put the phone into recovery?
k1nk33 said:
Jesus H. Christ that was a quick reply, thanks. I'm running win 7 and i'm still a bit of a noob, how do i put the phone into recovery?
Click to expand...
Click to collapse
try vol down and camera.
flyboyovyick said:
try vol down and camera.
Click to expand...
Click to collapse
From the homescreen , during boot or when connected to pc? . sorry for my ignorance.
i've gotten into download mode, so i'll get back as soon as i've any more info.
k1nk33 said:
From the homescreen , during boot or when connected to pc? . sorry for my ignorance.
Click to expand...
Click to collapse
http://xat.com/XDAdevelopers
join this chat so i can help you easyier
chronoz9 said:
please help me,after i do app2sd,my phone restart,i tought the app2sd was sucess,but after that my phone cant read the sdcard,i've tried to replace the sdcard with other sdcard,but it still cant detect the sdcard...
and then i think maybe if i flash it,it will recover,but when i connect my phone to my pc,it only charges but my phone cant detect the usb connection...
i've tried to hard reset it,but its still the same...
can somebody tell me what to do?
thanks and sorry if my english is bad
Click to expand...
Click to collapse
Hey, got mine sorted out, you need to deactivate the LG modem in device manager first then put your phone into download mode ( hold vol down as you power up the device and you should see DOWNLOAD MODE ). Then just reflash with KDZ update tool. The percentage bar never moved from 0 for me but , after about 15 mins, my phone rebooted i just unplugged and everything seems ok. The phone mounted the sd card and usb debugging now shows in the notification area.
P.S.
You may have to enable mass storage on the phone for this to work just can't remember if i did or not so try it both ways i.e. turn on mass storage and try flash and if that doesn't work turn it off and try again.
Hope this helps.
Oh, and a big thanks to 'flyboyovyick' for his help on this, Cheers man.
k1nk33 said:
Oh, and a big thanks to 'flyboyovyick' for his help on this, Cheers man.
Click to expand...
Click to collapse
hey thanks,
i guess everything is working then?
yeah , pretty much, few little problems but not the disaster i thought it was. tnx.
Hello friends,
I'm new to android, and tried to install app2sd, but the attempt was not recognized sdcard.
After that I was somehow trying to fix it using FlashTool (http://forum.xda-developers.com/showthread.php?t=920746), but after I used the "Optimize" the program and then restarted the phone is still only in the text "Sony Ericsson".
I've tried reset, hard reset, remove battery, but nothing worked until now.
Has anyone experienced this? Or know how to solve? Therefore only used the phone for 2 days and managed to catch it!
PS: Sorry if anything in the text does not make sense because I used the google translator to communicate.
Thanks!
use SEUS or pc companion to repair
I've tried using the PC companion and I returned that has no update to be done.
I used adb logcat and found that the boot goes in a loop whenever he gets in this command:
D/AudioHardwareMSM72XX( 4911): setVoiceVolume(1.000000)
With that you know what I should do?
http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en
Man, I've downloaded this file, says that when I install the software already installed is the latest.
When I turn on the phone, no button works to turn off it, only removing the battery.
use SEUS, it will repair ur phone in off state..
haomaster said:
Man, I've downloaded this file, says that when I install the software already installed is the latest.
When I turn on the phone, no button works to turn off it, only removing the battery.
Click to expand...
Click to collapse
anyway you can reinstall firmware.
1. Take phone battery off.
2. Connect USB to computer, than to phone.
3. Press and HOLD back button
4. Insert the battery
5. Let go the back button (release)
kiz1983 said:
use SEUS, it will repair ur phone in off state..
Click to expand...
Click to collapse
Man :| its seus:
k3ksik said:
http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en
Click to expand...
Click to collapse
Thank you to everyone who helped me! I managed to circumvent the problem by using FlashTool 0.2.6 firmware with generic.
Thanks!
haomaster said:
Hello friends,
I'm new to android, and tried to install app2sd, but the attempt was not recognized sdcard.
After that I was somehow trying to fix it using FlashTool (http://forum.xda-developers.com/showthread.php?t=920746), but after I used the "Optimize" the program and then restarted the phone is still only in the text "Sony Ericsson".
I've tried reset, hard reset, remove battery, but nothing worked until now.
Has anyone experienced this? Or know how to solve? Therefore only used the phone for 2 days and managed to catch it!
PS: Sorry if anything in the text does not make sense because I used the google translator to communicate.
Thanks!
Click to expand...
Click to collapse
Hello,
i have the same problem, after click in the option "Optimize", the mobile was restarted.
the only thing that appears is the SE Logo.
Can anyone help me, please?
Thanks
ShinobiPT said:
Hello,
i have the same problem, after click in the option "Optimize", the mobile was restarted.
the only thing that appears is the SE Logo.
Can anyone help me, please?
Thanks
Click to expand...
Click to collapse
See above, or see this post of this topic.
(Instructions how to repair the problem with PC Companion)
Thank you....
I will test again, root the SE and install a Room.
Thanks.....
I had that problem, stuck on SE logo, i waited a few minutes, and then the phone started.
problem big problem
please help
my pc does not recognize x8 I tried to update but the PCC is to update a half turn and stopped off.when it just turn on Vibrate.
just dead.
zakulaa said:
please help
my pc does not recognize x8 I tried to update but the PCC is to update a half turn and stopped off.when it just turn on Vibrate.
just dead.
Click to expand...
Click to collapse
Charge your phone (not plugged into usb on computer) for at least 4 hrs.. Then try again..
thanks:good:
---------- Post added at 01:24 PM ---------- Previous post was at 12:43 PM ----------
how to enable debugging mode when my phone wont turn on.
Hi there
Is anybody out there who can help or advice what to do with my phone( samsung omnia 2 - WM 6.5)?
I tried to change language from english to russian and I followed all steps but when I got the screen with "language setup- do not turn off, it takes about 10 minutes " nothing has changed( I wait nearly 3 hours ,after that i tried to do hard reset using the key buttons,took off battery and repeat the procedure for 1000 times without any luck)
Thank you
catalin78 said:
I tried to change language from english to russian and I followed all steps
Click to expand...
Click to collapse
Which steps?
Omnia2 language set up
catalin78 said:
Hi there
Is anybody out there who can help or advice what to do with my phone( samsung omnia 2 - WM 6.5)?
I tried to change language from english to russian and I followed all steps but when I got the screen with "language setup- do not turn off, it takes about 10 minutes " nothing has changed( I wait nearly 3 hours ,after that i tried to do hard reset using the key buttons,took off battery and repeat the procedure for 1000 times without any luck)
Thank you
Click to expand...
Click to collapse
Which steps?
Went in settings ,change language ,select russian,then it ask me in russian( my wife knows russian) to make sure i wont turn off my phone for the next 15 min. I put the phone to charged and wait for bloody hour or so and nothing happened only the screen with" language set up do not turn off wait 15 min". In that day i had a plain to catch ,so I took the phone from charging and plugged in my car charger for the next hour.
Waiting that long i got mad and I took off the battery and put it back and tried to do a physical hard reset with ,of course no result.Even now I have the same sceen when i turn on the phone "language set up do not turn off wait 15 min".
:silly:
What firmware Your phone is running? Some "cooked" firmwares don't have additional languages integrated.
ximian83 said:
What firmware Your phone is running? Some "cooked" firmwares don't have additional languages integrated.
Click to expand...
Click to collapse
I think is for all europe,anyway my problem is that the phone got frozen and i was wondering if any possibility to do a factory reset?
Cheers
catalin78 said:
I think is for all europe,anyway my problem is that the phone got frozen and i was wondering if any possibility to do a factory reset?
Cheers
Click to expand...
Click to collapse
Try reflashing it using Octans Downloader v2.14.
ximian83 said:
Try reflashing it using Octans Downloader v2.14.
Click to expand...
Click to collapse
Thanks for reply ,do you really think will work? I cant access in phone's menu whatsoever and when I tried to connected to pc through usb nothing happened ( the pc doesn't see my phone)
How To Flash
SAMSUNG I8000 Omnia II
1- Connect your phone and install drivers for PDA & Phone.
2- After you finish installing drivers reboot your PC.
3- Execute I8000 Downloader.
4- Check the EBoot, PDA, MultiCSC, MoviNand, and Phone.
5- Select files for each section.
6- Click the detect button.
7- Connect your phone to your PC by USB cable.
8- Wait the START button to be activated.
9- Click START button.
10- Wait till the downloading finish and then the phone will be rebooted automatically .
catalin78 said:
Thanks for reply ,do you really think will work? I cant access in phone's menu whatsoever and when I tried to connected to pc through usb nothing happened ( the pc doesn't see my phone)
Click to expand...
Click to collapse
Have You tried to connect the phone when its turned off? I think that it's the only option now.
My phone wont boot back up because i interrupted the download by holding down the power button during install...it just keeps flashing google !!!
Help only had for 1 hour !!
Don't panic, flash a factory image and everything will be fine again
Gorgtech said:
Don't panic, flash a factory image and everything will be fine again
Click to expand...
Click to collapse
how do i do that ?
please tell me you enabled adb debugging and oem unlock (in developer settings)
and why? why did you power down during the update?
I am not sure if I debugged anything ....all I did was unlock the system Ui or something like that by tapping on something 7 times to unlock some hidden features !
I was paying attention to the phone and had the buttons held down while holding
On the screen when I try to recover in the bottom left it says device is locked along with a bunch of stuff and then the last line says connect USB CABLE .
akoda said:
I am not sure if I debugged anything ....all I did was unlock the system Ui or something like that by tapping on something 7 times to unlock some hidden features !
I was paying attention to the phone and had the buttons held down while holding
Click to expand...
Click to collapse
if you didn't alter anything within those "hidden features" you're almost certainly out of luck.
you need to have enabled "adb debugging" to likely get yourself out of this jam... plus you didnt unlock your device
try some of the things listed in this thread: http://forum.xda-developers.com/nexus-6p/help/mess-locked-bootloader-os-t3316463
if they dont work, im sorry to day, you pooched your device. will need repairs.
There's probably nothing you can do. Your bootloader is locked so you can't use fastboot to flash anything. If the stock recovery supports adb sideload you could try that, otherwise you're fresh out of luck and need it to be repaired.
WOW ...i cant believe this .....what should i say when i return it ?
You could say it powered off during the update.
akoda said:
WOW ...i cant believe this .....what should i say when i return it ?
Click to expand...
Click to collapse
well.. if nothing else, a hard lesson to NOT touch the phone at all when it's updating.
really sucks, and clearly just a mistake. hopefully they take pity on you
dratsablive said:
You could say it powered off during the update.
Click to expand...
Click to collapse
thanks ...i appreciate all you guys help !!!
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Sisine said:
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Click to expand...
Click to collapse
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Vuk1152 said:
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Click to expand...
Click to collapse
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Sisine said:
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Click to expand...
Click to collapse
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Vuk1152 said:
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Click to expand...
Click to collapse
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Sisine said:
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Click to expand...
Click to collapse
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Vuk1152 said:
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Click to expand...
Click to collapse
I'll try that one, thank you.
Sisine said:
I'll try that one, thank you.
Click to expand...
Click to collapse
np
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
CurlyBlonde said:
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
Click to expand...
Click to collapse
sorry, i deleted my lenovo a1000 files to focus on other phones. from what i have heard that issue is common with that phone. i know someone who flashed the firmware on their a1000 and got stuck in the same issue as you. i tried to help them unbrick it but it seems to be impossible. i think you need to do a board replacement if you want to use that phone again. also, i dont think that the phone revisions are that important cause i managed to get lenovo a1000m firmware on my lenovo a1000.