Database Users

Can't connect to PC

Hi I am running Open Touch 7.7 by ttran on my t-mobile wing.
Unfortunately, whenever I connect the phone to my PC via usb all I hear is a the usb connection sound twice and the device is not picked up at all(I cannot access it in My Computer).
I have tried multiple usb cables and used a computer running Windows XP and a computer running Windows 7 (beta). My phone used to connect just fine, which is how i got open touch onto it, but now i can't seem to get it connect to my PC at all. I tried hard-resetting my phone but it did not help.
Any suggestions on how to fix this problem?

reflash
I had the same problem too with this ROM. The only way I could get a connection again was to reflash the ROM. This happened a couple times before I gave up on it and installed a pdaviet rom. Now, I'm currently using (16.03.09) - Herald 6.1 Rom -5.2.20757.1400 which is running very well.
Good luck.

try logging off or restarting computer. For some reason if I can't connect with this rom, that works every time

hey i know how to flash a ROM with my sd card (thanks to ivan's guide) but i dont know how to Hard Spl without pc connection which is needed to flash a rom with a micro sd!
EDIT!: I got my device to connect to the pc. I simply went to Settings-->System--->USB to PC and enabled it. Then when I connected my device i had to run some drivers searches through windows and finally it recognized my wing as a winmo 6.1 device.

Help Required; Screen Stuck...

Hi all,
I just did my first experiment at cooking a ROM (did some tweaking and built the ROM) using OS Kitchen. After I copied the ROM to my phone using ROM Update utility, the phone is stuck at this screen:
"Preparing the phone for first use. The Today screen....etc etc"
I am now not able to establish an active sync connection to my PC in order to load a new ROM. What can I do? Pls help...
I have installed the HSPL by jocky
Thanks in Advance

Whew!!! Got it working. For a moment, I thot I had bricked my phone. These r the options I considered:
a) Booting the phone using the mini sd card. I guess one has to use Gold Card for that but I didnt have a mini sd card reader on my PC in the first place so that option was out.
b) Next I read in the forums abt starting the phone in boot loader mode, and this is what finally worked. It seems, as an alternative to getting an activesync connection, one can connect the phone to the PC using USB and then start in bootloader mode (by pressing vol down and end call). This way, a connection via USB is established between ur phone and PC. Now flashing any ROM is just a cinch using stock roms or custom roms (using the custom RUU)

Pfew
Got stuck too and used this trick to load stock rom.
Thx a million

*Urgent* Bootloader won't connect - Brick?

hey all,
Wanted to do a clean installation of cyanogenm7,
Step by step:
entered bootloader
run task29
enterbootloader
install radio 2.15.50.14
enterbootloader
install magldr113_daf
thats it..
now, it can never use usb flasher (in order to install cwm) from magldr
for only 2-3 times it connected from USB in bootloader, and now it does not happen either. and I couldnt install cwm on that bootloader ofcourse.
windows faults; device not recognized..
did it brick? and.. why?
I'm leaving town for a business meeting tomorrow and have no backup phone right now.
save me please! =)

came home to try on a machine with XP (activesync present)
cant connect and also XP gave the same error..
device not recognized..
any ideas?

went back to laptop, win7x6
it didn't recognize at first, as usual
then it went USB on bootloader.. (did a restart first, and then it says HTC USB SYnc is successfully installed)
task29 'd again
fine
radio install began and, lost connection in the middle.
now says rom code error as normal, but again not recgnizing the device...

If aynone interested, or anyone else having the same problem at the future,
the phone is at the service and the mainboard's gonna be replaced.
http://forum.xda-developers.com/showthread.php?p=15267315#post15267315

Maybe your usb cable is damaged

Might help if you do a fresh reinstalled of windows 6.5 will erase all. And try again.
Sent from my HD2 using XDA Premium App

if you were already running cm7 then all you needed to do to fresh isntall was boot into CWM and factory reset it and isntall the rom from zip
all those extra steps you have taken are pointless

Bootloader not detected at PC

Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help

install windows mobile device center to your pc.otherwise it doesn't recognize it.

I have installed WMDC. But it doesn't recognize it at all.

but cwm isnt flashed from bootloader? r u using magldr or clk?

MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing

try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)

after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see

[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks

Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable

After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?

Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App

Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.

[Q] HD2 stucked after SD card stock ROM flashing

Hi!
I don't know if this is a right forum but I run into a problem that I can't solve. I had some Android NAND version that stoped to work after a SD card was formated (silly but true). It loaded almost fully but it didn't show any icons and nothing was functional. Even wasn't recognised on PC in bootloader mode. So I decided to go back to stock ROM via SD card. And then it went to 9% and error occured. I tryed to flash again but it goes just to "Loading..." screen and nothing happens.
The worst thing is that HD2 is still unrecognized by PC via USB so I can't do anything via USB. The USB port on HD2 is OK, it was working with HTC Sync on Android ROM, tryed 2 differnet SD cards (FAT32), Windows XP and WIndows 7, HTC Sync, MS mobile device center and Activesync and no luck. Any ide what to do, at least what driver should I use?
All the answers I found include a step with USB flashing and I can't do it...

ok. reinstall windows mobile device center (win 7, vista) or activesync (xp)
open it, connection settings, uncheck allow usb connections and try again. also make sure that you aren't using a usb hub. try other usd ports.
wait a bit. phone drivers should be installed and serial should turn to usb (if drivers installation fails or if this doesnt work, open device manager, and delete the qualcomm usb driver or windows ce (don't remember which one it is in bootloader mode), unplug and let it install it again)
after installation of usb driver succeeds, you should see usb at the bottom of the screen. after that point you can try reflashing official roms

Thank you for your help. I solved my problem and saved my HD2
I was using original USB cable that came with HD2. Then I switched it with USB cable that came with my Evo 3D and that cable is thicker than original HD2. At first attempt HD2 was recognized and after all a driver (Qualcom USB) was installed so I flashed all the way to WP 7.8.
O, what a joy, I tought that I ended with bricked HD2, and now I have WP 7.8 device )))