I Can't Install another ROM - Acer Iconia A500

fifth time I try to install 4.1.2 CM10 ... using a500 recovery
but always lock this part (look at picture), waited 30 minutes and nothing besides, I'm using ROM-lightspeed 4.7, since I installed it, I can't use any ROM of CIVATO (4.1.2 or 4.0.4)
http://imageshack.us/photo/my-images/198/img201301141135540.jpg

anyone?

Verdeee said:
anyone?
Click to expand...
Click to collapse
Do u have the v8 ICS unlocked bootloader?
See guides in my Sig
Sent from my GT-I9300 using Tapatalk 2

Verdeee said:
fifth time I try to install 4.1.2 CM10 ... using a500 recovery
but always lock this part (look at picture), waited 30 minutes and nothing besides, I'm using ROM-lightspeed 4.7, since I installed it, I can't use any ROM of CIVATO (4.1.2 or 4.0.4)
Click to expand...
Click to collapse
Shooting in the dark here...
Is by your boatloader compatible?
Does your recovery support the Google api version in the Rom?
Have you tried any other roms?
Have you tried flashing to a different recovery and then flashing your rom?

Verdeee said:
fifth time I try to install 4.1.2 CM10 ... using a500 recovery
but always lock this part (look at picture), waited 30 minutes and nothing besides, I'm using ROM-lightspeed 4.7, since I installed it, I can't use any ROM of CIVATO (4.1.2 or 4.0.4)
http://imageshack.us/photo/my-images/198/img201301141135540.jpg
Click to expand...
Click to collapse
just had a another look at your pic....bit easier to see on my pc!!!
You're running cwm 1.3.4 this is an HC only recovery -
You're trying to flash a JB rom so you will definitely need the unlocked bootloader and one of the recovery's that come with it
Once you get that sorted you'll be all good!!!

Thanks, now I have another problem, I installed acer's driver and selected debug mode, but the manager appears acer "No Acer Connected" but I can open the tablet folders on the pc, what am I doing wrong?

sorry, now i have recovery Version CWM rev1.7.3 and bootloader Version 3.0.1 .. I Can install JB CM10?

Verdeee said:
sorry, now i have recovery Version CWM rev1.7.3 and bootloader Version 3.0.1 .. I Can install JB CM10?
Click to expand...
Click to collapse
No, no m8 u must flash v8 bootloader first and you must have yr cpuid for that. If u flash that rom without the v8 youll brick it
Two stickys in dev forum...one for v8 and one for cpuid.
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 07:01 AM ---------- Previous post was at 06:19 AM ----------
Verdeee said:
Thanks, now I have another problem, I installed acer's driver and selected debug mode, but the manager appears acer "No Acer Connected" but I can open the tablet folders on the pc, what am I doing wrong?
Click to expand...
Click to collapse
Youll need the drivers from the android sdk too..theres a mini sdk zip in the cpuid guide, bottom of the first post. Instructions to set those up are in that post as well
Dowload the apxflash manager tool, its the easiest way to install the bootloader and retrieves your cpuid too...at the first screen choose 'bundle market' option and then bundle number 17.... Also choose option to dump and save your 'bct' when u get to that screen.
If u follow things carefully youll have no probs
Good luck
dibb
Sent from my GT-I9300 using Tapatalk 2

i installed "904 KiB A500_A501_ICS_V8_green_bootloader.a500apx" from this link http://skrilax.droid-developers.org/a500/nvflash/images/ is it? because my bootloader says 3.0.1

Verdeee said:
i installed "904 KiBA500_A501_ICS_V8_green_bootloader.a500apx" from this link http://skrilax.droid-developers.org/a500/nvflash/images/ is it? because my bootloader says 3.0.1
Click to expand...
Click to collapse
U must install the unlocked bootloader v8.a500.apx file with the apxflash tool so yes thats why you still have 3.0.1
Sent from my GT-I9300 using Tapatalk 2

link of file? please ;D

Verdeee said:
link of file? please ;D
Click to expand...
Click to collapse
M8 theres only one way to get the v8 installed at thats with nvflash or apxflash...trying to install it with an app or flashing it in cwm wont work!!
You must read the guides and if u dont get your cpuid and use it, then you will end up bricking yr tab....Please understand this.
The links are stickied in the dev forum like I said before...there's even a couple in my sig...
Sent from my GT-I9300 using Tapatalk 2

Related

Question in wrong place

Is there an easy way to get something VERY close to stock final ICS but with root and cwm?
I'm not a fan of custom kernels and custom roms.
Sent from my LT18i using Tapatalk 2
Flash official ICS, flash custom kernel , the modded stock one, flash the superuser fix , download busybox
Stock ICS with route and cwm
No other way
Sent from my LT18i using xda premium
CrazyPeter said:
Is there an easy way to get something VERY close to stock final ICS but with root and cwm?
I'm not a fan of custom kernels and custom roms.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
if you are unlocked to don't have to keep the custom kernel. you can just hotboot the kernel, flash the zip and then reboot and it will be like you never flashed the kernel but you will be rooted.
Pvy.
pvyParts said:
if you are unlocked to don't have to keep the custom kernel. you can just hotboot the kernel, flash the zip and then reboot and it will be like you never flashed the kernel but you will be rooted.
Pvy.
Click to expand...
Click to collapse
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Simple
Flash.custom kernel.with flashtoll
Download superuser.zip from doomed151 in original thread
Flash the superuser.zip through cwm
Download busybox from market
There you have root
Sent from my LT18i using xda premium
chiefy009 said:
Simple
Flash.custom kernel.with flashtoll
Download superuser.zip from doomed151 in original thread
Flash the superuser.zip through cwm
Download busybox from market
There you have root
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Where does ICS fit into that? It's not even mentioned? What's flashtoll?
CrazyPeter said:
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Click to expand...
Click to collapse
or
boot into fastboot mode
get kernel boot.img with CWM
http://forum.xda-developers.com/showthread.php?t=1591279
then run the command
Code:
fastboot boot boot.img
be sure to spam vol - or back or what ever the kernel requres to get into CMW on reboot.
flash the SU.zip
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
cant remember who linked that one
reboot and the kernel will be gone
enjoy rooted phone.
Pvy.
CrazyPeter said:
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Click to expand...
Click to collapse
You need fastboot.exe. If you have it then first download the SuperUser zip file from here:
http://forum.xda-developers.com/showpost.php?p=24825517&postcount=105
And put it on your SD card.
Then download any kernel that has CWM support. There is one here:
http://forum.xda-developers.com/showpost.php?p=24826349&postcount=110
Then put your phone into fastboot mode (turn it off then plug it in while holding the Back button - the LED will turn BLUE - if it doesn't then try plugging in while holding the MENU button instead, I can never remember which one it is).
Then copy the kernel to your device like this:
fastboot boot recoveryARC.img
Your device will reboot - when the SONY logo goes bright start spamming the VOLUME DOWN button to enter Recovery.
Then flash the SuperUser.zip file from your SD card. Unplug the phone, reboot and you have root access. You should then head to Google Play and download Busybox Installer and install the latest release.
Good luck.
Isn't this the naff Chinese leaked build? Not the final one?
I think i'll wait for the dust to settle, too much hacking and failure stories right now, along with "fluff" from leaked betas and prereleases and lt15i owners trying to get stuff working.
This is the final release. I love it FWIW.
However, installing it was a PITA - I bricked my device three times before I got it right using Flashtool. But it's worth it - I've been running the beta since it was released and the performance of the final release is MUCH better.
Plus they seem to have supercharged the launcher - I'm only getting a redraw if I've been running a heavy game (Temple Run for example). The beta version would reload the launcher a lot.
There will be a new version of Flashtool that will allow the official FTF to be flashed without all the hassle - might be worth waiting for. The issue is with changing the partition table or something.
only fastboot doomkernel
then install su by recovery
then flash stock kernel by flash tool & exclude all other option
and reboot
please can someone find a way too root this firmware without unlocking the bootloader??
omarfaieq007 said:
please can someone find a way too root this firmware without unlocking the bootloader??
Click to expand...
Click to collapse
You might have a long wait. The .62 release never got rooted.
Sent from my LT18i using XDA App
if i unlock bootloader then
flash ics using flashtool
custom karnel or hotboot(how to work with hotboot?)
recovery img (optional)
su by recovery
after that if i lock bootloader.... ll root work ? n can i get ota future updates ?
chiefy009 said:
Flash official ICS, flash custom kernel , the modded stock one, flash the superuser fix , download busybox
Stock ICS with route and cwm
No other way
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
TenkaTsai said:
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
Click to expand...
Click to collapse
how did u sort out it's without unlocking bootloader
can anyone from china confirm or at least translate?google translate fails..
TenkaTsai said:
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
Click to expand...
Click to collapse
Can you upload that rar file here?
here the root file for ics but i didnt check
regards
rasgula said:
here the root file for ics but i didnt check
regards
Click to expand...
Click to collapse
Thank you so much..I will try and report back..
Edit: I ran the command..nothing happens after restart and no superuser..it recognizes the phone though..
Doesn't work on ARC S. tried on Official ICS released yesterday.

[Q] Clockworkmod and icecream sandwitch

I have Clockworkmod installed and now that ice cream sandwich is finally out I want to upgrade my a500. Can someone point me to right firmware and directions.
I guess I need new boot loader installed also.
tritron777 said:
I have Clockworkmod installed and now that ice cream sandwich is finally out I want to upgrade my a500. Can someone point me to right firmware and directions.
I guess I need new boot loader installed also.
Click to expand...
Click to collapse
You will want to upgrade your bootloader first for sure. Most roms are going to not work with the Honeycomb bootloader in the near future. Go ahead and put version 7 of the bootloader on, so future bootloader enhancements can be flashed via CWM. Once you install the bootloader, install CWM again, pick a rom & enjoy! Test drive them all.
read the afterota thread in dev section download the software, as easy as 1-2-3 and your pretty much done , I dont know if he has V7 listed now , if not Civato has it!
Attantion
To upgrade to tegraowners ICS ROM or FLEXREAPER (not extrem vetsion) is no new bootloader needed!
I'm using both ROM with my stock HC bootloadet!
You can upgrade the bootloader later if you like.
m.
meduza2 said:
To upgrade to tegraowners ICS ROM or FLEXREAPER (not extrem vetsion) is no new bootloader needed!
I'm using both ROM with my stock HC bootloadet!
You can upgrade the bootloader later if you like.
m.
Click to expand...
Click to collapse
Really?
I have 4.0.3 and have just rooted.
I have downloaded tegraowners ICS to my sd and the latest galls.
Are you saying i can just boot and do the power + vol deal to install this rom and keep my bootloader stock?
Yes! But if it is the newst tegraowners ICS recovery 1.7.3 is required.
m.
meduza2 said:
Yes! But if it is the newst tegraowners ICS recovery 1.7.3 is required.
m.
Click to expand...
Click to collapse
Can I install 1.7.3 with Acer recovery installer?
No! Only a basic version but with that you can flash then 1.7.3.
m.
meduza2 said:
No! Only a basic version but with that you can flash then 1.7.3.
m.
Click to expand...
Click to collapse
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
OldGaf said:
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
Click to expand...
Click to collapse
Exactly..
Yes!
m.
OldGaf said:
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
Click to expand...
Click to collapse
Sigh..... OK..... I tried 1.3.4 but now when I try to enter recovery I get "recovery verified failed" in red and I am unable to get the old one back.
I am running the ota ics 4.0.3 with 0.03.12-ics bootloader.
This was rooted with thund3r's method.
1. Which ver of cwm should i install with ari so I can then install touch 1.7.3
2. Is there anything I am not doing that i need to?
3. Is there a stock one I can download and install with Ari if I need it back?
Try the afterota tool http://forum.xda-developers.com/showthread.php?t=1675939, you can manually select the recovery you want and upgrade the bootloader if you need to. It's very easy to use.
lowsum said:
Try the afterota tool http://forum.xda-developers.com/showthread.php?t=1675939, you can manually select the recovery you want and upgrade the bootloader if you need to. It's very easy to use.
Click to expand...
Click to collapse
Sigh... there is only the light ver available for that now which is for info only.... and that crashed while gathering info.
Disable antivirus and user control on PC!
m.
meduza2 said:
Disable antivirus and user control on PC!
m.
Click to expand...
Click to collapse
Ya was thinking that... but no point with light ver as it does not actually do anything.... info only.
Hope the full version is back soon..... don't like loosing....
meduza2 said:
Disable antivirus and user control on PC!
m.
Click to expand...
Click to collapse
OK... All is good now and am running FLEXREAPER-RF1-EXTREME-EDITION_rv3 !!!
Thanks a so much for your help!
I picked this ROM as my first as it is same kernel and there are not many issues. May go to Tegraowners once issues are not as many.
Thanks again!
-OG-
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A

Need help fast!!! Device cant turn on

my device cant switch on...when press the on/off button,only the MOTOROLA logo only appear but the device still not boot...
it all happened after i flash this ROM http://forum.xda-developers.com/showthread.php?t=1827801
i use the second method "Installation guide for CMx roms users" but actually i use MIUI before flashing this rom..need help fast,no phone to use..anyone know please reply ASAP....Tq
apaini said:
my device cant switch on...when press the on/off button,only the MOTOROLA logo only appear but the device still not boot...
it all happened after i flash this ROM http://forum.xda-developers.com/showthread.php?t=1827801
i use the second method "Installation guide for CMx roms users" but actually i use MIUI before flashing this rom..need help fast,no phone to use..anyone know please reply ASAP....Tq
Click to expand...
Click to collapse
Boot into cwm and factory reset, wipe cache and dalvik cache also. Then re flash ROM of your choice. If it still won't boot I suggest trying another ROM or Odin back to stock and re root your device.
Sent from my SPH-D700 using Xparent SkyBlue Tapatalk 2
Nashdogg said:
Boot into cwm and factory reset, wipe cache and dalvik cache also. Then re flash ROM of your choice. If it still won't boot I suggest trying another ROM or Odin back to stock and re root your device.
Sent from my SPH-D700 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
thats the problem,my phone cant even boot to recovery (even download mode)
apaini said:
thats the problem,my phone cant even boot to recovery (even download mode)
Click to expand...
Click to collapse
Does your LED turn green and blue when phone turns on and gets stuck at moto logo?
Sent from my A953
Megalith27 said:
Does your LED turn green and blue when phone turns on and gets stuck at moto logo?
Sent from my A953
Click to expand...
Click to collapse
nope...
n when plug in charger,it shows a battery icon with a question mark..
You need to flash via RSD Lite, then root it and start over
Use this guide: http://forum.xda-developers.com/showthread.php?t=1032372
Caesarivs said:
You need to flash via RSD Lite, then root it and start over
Use this guide: http://forum.xda-developers.com/showthread.php?t=1032372
Click to expand...
Click to collapse
RSD lite "page not found"
apaini said:
RSD lite "page not found"
Click to expand...
Click to collapse
Download it from here: http://www.mediafire.com/download.php?racaejnadym1q2g
And follow the guide linked below
I had same problem as you and i solved it.
I m coming from miui and when i m trying to charge it i had a ?
it s due to wrong kernel version
I download china kernel from tezet (even if i m in france) and i install it (i start recovery mode with connected to power)
Hope you can resolve your problem
Sent from my A953 using xda app-developers app
You are right, the problem is caused by flashing different roms contain different kernel. I met similar problem before. Flash correct requested kernel before flashing the rom you want is necessary.
Suggestion for other users: Before flashing new rom, know what is your current kernel version, and do necessary adjusted work if needed.
Sent from my A953 using xda premium
Caesarivs said:
You need to flash via RSD Lite, then root it and start over
Use this guide: http://forum.xda-developers.com/showthread.php?t=1032372
Click to expand...
Click to collapse
mentioned in step 2 "Download and extract The right SBF restore file"
what is SBF restore file?
apaini said:
mentioned in step 2 "Download and extract The right SBF restore file"
what is SBF restore file?
Click to expand...
Click to collapse
cant find download link for SBF file.....
apaini said:
mentioned in step 2 "Download and extract The right SBF restore file"
what is SBF restore file?
Click to expand...
Click to collapse
apaini said:
cant find download link for SBF file.....
Click to expand...
Click to collapse
You must find your stock firmware or flash any stock firmware newer than the one you had before here: http://forum.xda-developers.com/showthread.php?t=1465476
apaini,
if you have ? when you're charging phone, you cannot use RSD because of lower charge
try to update your kernel
lacolle said:
apaini,
if you have ? when you're charging phone, you cannot use RSD because of lower charge
try to update your kernel
Click to expand...
Click to collapse
He can't update kernel because CWM recovery is not accesible, RSD is the only way
apaini said:
my device cant switch on...when press the on/off button,only the MOTOROLA logo only appear but the device still not boot...
it all happened after i flash this ROM http://forum.xda-developers.com/showthread.php?t=1827801
i use the second method "Installation guide for CMx roms users" but actually i use MIUI before flashing this rom..need help fast,no phone to use..anyone know please reply ASAP....Tq
Click to expand...
Click to collapse
The problem may be caused by flashing the CM10 directly, you need to flash a updated kernel (check what tezet said about the kernel update in his CM10) from froyo kernel to CH kernel before flashing CM10 (not the first two CM10 release, which asks for froyo kernel to run.)
I had similar problem when I flashed directly from froyo kernel to a CM10 that asks for GB kernel to run. So I flashed a updated kernel before flashing CM10, then it CM 10 working.
I assume the problem is caused by different kernel. We usually call it "M logo stuck" problem. Hope my suggestion works. And hope your work will work soon.
Best wishes,
Peter
Sent from my A953 using xda premium
lacolle said:
apaini,
if you have ? when you're charging phone, you cannot use RSD because of lower charge
try to update your kernel
Click to expand...
Click to collapse
my phone battery totally empty..
is it nescessary to have power on the battery...
if it is,then i must buy the external charger
finally can boot....
thx everyone 4 your help .....
really appreciate it
good news
---------- Post added at 03:29 PM ---------- Previous post was at 03:04 PM ----------
witch solution do you use ? RSD or kernel update ?
lacolle said:
good news
---------- Post added at 03:29 PM ---------- Previous post was at 03:04 PM ----------
witch solution do you use ? RSD or kernel update ?
Click to expand...
Click to collapse
yeah, which method do you use?
Sent from my A953 using xda premium

TWRP Install over CWM6 for P3113 Galaxy TAB 2 7 inch

I can't seem to find a link for the version of TWRP that will work on model P3113. I have CyanogenMod 10 Rom JB 4.1.1 with Clockwork Mod 6x.
Can I even install TWRP over CWM6 and can I do it in Mobile ODIn Pro? I have that installed.
I also have Goo Manager and cannot figure out why I cannot find or download TWRP from there unless they do not have a version for my Model or that ROM/Kernel?
I am new to the forum so I cannot ask questions yet in the developer sections which is starting to get annoying since I had one or two threads I could have asked this question on.
Thanks
Use goo manager to install twrp.
Sent from my SGH-I727 using Tapatalk 2
scottx . said:
Use goo manager to install twrp.
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I have tried that method and it cannot find any files to download
androidfr33k said:
I have tried that method and it cannot find any files to download
Click to expand...
Click to collapse
Use mobile Odin if you have the proper files. Why do you want twrp instead of cwm?
scottx . said:
Use mobile Odin if you have the proper files. Why do you want twrp instead of cwm?
Click to expand...
Click to collapse
Just wanted to try it. So this brings me back to my first question. Is there a compatible version for the Samsung galaxy tab 2 7 inch running cyanogenmod10 latest nightly build?
I Google searched and searched within Samsung forum. I found a version 2.2.1 but I think it was for a hero touch
androidfr33k said:
Just wanted to try it. So this brings me back to my first question. Is there a compatible version for the Samsung galaxy tab 2 7 inch running cyanogenmod10 latest nightly build?
I Google searched and searched within Samsung forum. I found a version 2.2.1 but I think it was for a hero touch
Click to expand...
Click to collapse
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
scottx . said:
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
Click to expand...
Click to collapse
Will this version work on the p3113? The linked file is p3110
Thanks
I just thought about what you said that cwm recovery has nothing to do with ROM but according to the guide I used it said I had to use a cwm version 6 with JB. so that is why I mentioned the ROM version because it was based on JB. So would you not think it does indeed play an important role in choosing a compatible recovery?
androidfr33k said:
I just thought about what you said that cwm recovery has nothing to do with ROM but according to the guide I used it said I had to use a cwm version 6 with JB. so that is why I mentioned the ROM version because it was based on JB. So would you not think it does indeed play an important role in choosing a compatible recovery?
Click to expand...
Click to collapse
Developers or tutorial writers list the recovery because thats the one they preffer / use themselves, but most of the time, it doesnt matter which one you use!!
Btw, the reason they say to use CWM6 with Jelly Bean, is because CWM will automatically stop JB from erasing CWM and returning the stock recovery,
but even if you flash with lets say CWM5, you can still remove the script that will undo CWM, but you will have to do it manually (it's an extra step)
scottx . said:
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
Click to expand...
Click to collapse
Will this version work on my GT-P3113?
Thanks
Try this one by nycbjr. It's not the official one, but it is known to work with the P3113
http://rootzwiki.com/topic/27140-recoverytouchtwrp211galaxy-tab-2-7-and-10662012/
androidfr33k said:
Will this version work on my GT-P3113?
Thanks
Click to expand...
Click to collapse
Yes. Works fine on any 31xx. I ran it on my 3113 for a while before cwm came out.

[Q] Defy bricked

Hello all,
For the 2nd time in 3 years I have bricked my phone. I was using Cyanogen 7.2 in the past and today I have decided to try MIUI.
After a flash i was geting reboot before Android was loaded to I decided to install the base OS.
Installed RSDLite5.6 -- shashed one of the oficial Andro for version 2.2.1 I think (closed page and I don't have it in front now) and device is all dead.
I know in the past I have flashed a chinese ROM and was working again...rooted and all of that but I can't find a download link for a ROM to do this.
I am not shure how to proceed also.
Can you guys help me, it will be much apreciated.
I've got the same problem, tried to root with superoneclick, first time it didn't go through, 2nd time it went through. Phone turned off (instead of rebooting) and screen is black since then, doesn't come on....
marius.roibu said:
Hello all,
For the 2nd time in 3 years I have bricked my phone. I was using Cyanogen 7.2 in the past and today I have decided to try MIUI.
After a flash i was geting reboot before Android was loaded to I decided to install the base OS.
Installed RSDLite5.6 -- shashed one of the oficial Andro for version 2.2.1 I think (closed page and I don't have it in front now) and device is all dead.
I know in the past I have flashed a chinese ROM and was working again...rooted and all of that but I can't find a download link for a ROM to do this.
I am not shure how to proceed also.
Can you guys help me, it will be much apreciated.
Click to expand...
Click to collapse
Why did you posted this here? correct forum is Defy Q&A, Help & Troubleshooting
Download dfp 231 sbf if it is a defy plus
Sent from my MB526 using Tapatalk 4
No...is the defy....not defy+..sorry that I forgot to mention it
If you're planning to use jelly bean ROM, you can still flash it
Otherwise search for a bl6 sbf for defy. These threads are there in development forum
Sent from my MB526 using Tapatalk 4
thekguy said:
If you're planning to use jelly bean ROM, you can still flash it
Otherwise search for a bl6 sbf for defy. These threads are there in development forum
Sent from my MB526 using Tapatalk 4
Click to expand...
Click to collapse
I can't flash a custom rom now because I don't have recovery. The only thing I can do with my phone is to enter download mode.
As far as I know I have to:
- flash a new room that I can use it to boot device and work on it.
- root device and install recovery
- install cooked rom
My problem is that I don't know what to flash so that I can boot my phone --- now it is in the dead phase
You have to flash an sbf, not a ROM(that's what you will flash once you get back recovery). Read the defy beginners guide to get the steps. Basically:
Get sbf (search and download)
Get rsdlite and Motorola USB drivers
Flash it (from boot loader mode)
Sent from my MB526 using Tapatalk 4
thekguy said:
You have to flash an sbf, not a ROM(that's what you will flash once you get back recovery). Read the defy beginners guide to get the steps. Basically:
Get sbf (search and download)
Get rsdlite and Motorola USB drivers
Flash it (from boot loader mode)
Sent from my MB526 using Tapatalk 4
Click to expand...
Click to collapse
As mentioned already I have flashed sbf with RSDLite and still in trouble. Please point me to a correct sbf file to use. This is what I need
marius.roibu said:
As mentioned already I have flashed sbf with RSDLite and still in trouble. Please point me to a correct sbf file to use. This is what I need
Click to expand...
Click to collapse
Did you checkout http://forum.xda-developers.com/showthread.php?t=2324104&highlight=bricked+defy
---------- Post added at 08:06 PM ---------- Previous post was at 07:59 PM ----------
Here you can find SBF-files
http://forum.xda-developers.com/showthread.php?t=966537
Did you try a full wipe in stock recovery before flash .sbf?

Categories

Resources