I have Clockworkmod installed and now that ice cream sandwich is finally out I want to upgrade my a500. Can someone point me to right firmware and directions.
I guess I need new boot loader installed also.
tritron777 said:
I have Clockworkmod installed and now that ice cream sandwich is finally out I want to upgrade my a500. Can someone point me to right firmware and directions.
I guess I need new boot loader installed also.
Click to expand...
Click to collapse
You will want to upgrade your bootloader first for sure. Most roms are going to not work with the Honeycomb bootloader in the near future. Go ahead and put version 7 of the bootloader on, so future bootloader enhancements can be flashed via CWM. Once you install the bootloader, install CWM again, pick a rom & enjoy! Test drive them all.
read the afterota thread in dev section download the software, as easy as 1-2-3 and your pretty much done , I dont know if he has V7 listed now , if not Civato has it!
Attantion
To upgrade to tegraowners ICS ROM or FLEXREAPER (not extrem vetsion) is no new bootloader needed!
I'm using both ROM with my stock HC bootloadet!
You can upgrade the bootloader later if you like.
m.
meduza2 said:
To upgrade to tegraowners ICS ROM or FLEXREAPER (not extrem vetsion) is no new bootloader needed!
I'm using both ROM with my stock HC bootloadet!
You can upgrade the bootloader later if you like.
m.
Click to expand...
Click to collapse
Really?
I have 4.0.3 and have just rooted.
I have downloaded tegraowners ICS to my sd and the latest galls.
Are you saying i can just boot and do the power + vol deal to install this rom and keep my bootloader stock?
Yes! But if it is the newst tegraowners ICS recovery 1.7.3 is required.
m.
meduza2 said:
Yes! But if it is the newst tegraowners ICS recovery 1.7.3 is required.
m.
Click to expand...
Click to collapse
Can I install 1.7.3 with Acer recovery installer?
No! Only a basic version but with that you can flash then 1.7.3.
m.
meduza2 said:
No! Only a basic version but with that you can flash then 1.7.3.
m.
Click to expand...
Click to collapse
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
OldGaf said:
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
Click to expand...
Click to collapse
Exactly..
Yes!
m.
OldGaf said:
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
Click to expand...
Click to collapse
Sigh..... OK..... I tried 1.3.4 but now when I try to enter recovery I get "recovery verified failed" in red and I am unable to get the old one back.
I am running the ota ics 4.0.3 with 0.03.12-ics bootloader.
This was rooted with thund3r's method.
1. Which ver of cwm should i install with ari so I can then install touch 1.7.3
2. Is there anything I am not doing that i need to?
3. Is there a stock one I can download and install with Ari if I need it back?
Try the afterota tool http://forum.xda-developers.com/showthread.php?t=1675939, you can manually select the recovery you want and upgrade the bootloader if you need to. It's very easy to use.
lowsum said:
Try the afterota tool http://forum.xda-developers.com/showthread.php?t=1675939, you can manually select the recovery you want and upgrade the bootloader if you need to. It's very easy to use.
Click to expand...
Click to collapse
Sigh... there is only the light ver available for that now which is for info only.... and that crashed while gathering info.
Disable antivirus and user control on PC!
m.
meduza2 said:
Disable antivirus and user control on PC!
m.
Click to expand...
Click to collapse
Ya was thinking that... but no point with light ver as it does not actually do anything.... info only.
Hope the full version is back soon..... don't like loosing....
meduza2 said:
Disable antivirus and user control on PC!
m.
Click to expand...
Click to collapse
OK... All is good now and am running FLEXREAPER-RF1-EXTREME-EDITION_rv3 !!!
Thanks a so much for your help!
I picked this ROM as my first as it is same kernel and there are not many issues. May go to Tegraowners once issues are not as many.
Thanks again!
-OG-
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Related
GFAN_milestone2_umts_milestone2_china-use.....sbf
Direct link by chibani>>>Click<<<
------------------------------------------------------------------------------------------
Since someone extract the new kernel from OTA package, I pack them as a flashable zip. But I haven't test it yet.
Download link>>>Click<<<
Direct link by chibani>>>Click<<<
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update.zip with root and maybe the new kernel [Based on GB release]
Original link by quens: http://bbs.gfan.com/android-2829651-1-1.html
How to Install:
1.Flash a clean CH 2.6.0 sbf
2.Download GFAN_Quens_ME722_2.3.4.rar and extract it. Copy GFAN_Quens_ME722_2.3.4_PT1.zip and GFAN_Quens_ME722_2.3.4_PT2.zip to sdcard
3.Root 2.6.0 as you always do.
4.Install D2bootstrap
5.Boot to recovery
6.Double wipe.
7.First apply GFAN_Quens_ME722_2.3.4_PT1.zip and then apply GFAN_Quens_ME722_2.3.4_PT2.zip
8.Reboot and done.
Direct link by chibani>>>Click<<<
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rooted nandroid backup based on GB release with 4.5.3-77 kernel:
http://www.mirrorcreator.com/files/P47Y3QRR/2011_09_27_18_44_42.7z_links
after you restore this backup, you will have to flash the 4.5.3-77 kernel to make it booted.
Direct link by chibani:http://android.loicg.net/roms/2011_09_27_18_44_42.7z
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is OTA package(125mb):
http://android.loicg.net/roms/signed-delta-ota-Blur_Version.2.6.0-45.1.zip by chibani
http://mir.cr/FGIEBRFY by chijie
http://115.com/file/clt87btu
You need to upgrade from CH 2.6.0. Here is the download link:
http://android.loicg.net/roms/MLS2G...LESTONE2GCCORE_P018_A030_HWp2a_Service1FF.rar by chibani
http://115.com/file/dn6p9ej3
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Endless7 said:
This is OTA package(125mb):
http://115.com/file/clt87btu
You need to upgrade from CH 2.6.0. Here is the download link:
http://115.com/file/dn6p9ej3
How to download:
Press"**下载",then your download will start automatically.
Click to expand...
Click to collapse
Thanks for the link.. Have you tried it??
I'm unable to download.. opens a pop-up..
Is that the official release for Moto Milestone 2 in China?
Can we confirm that the bootloader it's still locked, right?
If thats true, we can forget proper customs roms.
oTToToTenTanz said:
Is that the official release for Moto Milestone 2 in China?
Click to expand...
Click to collapse
yes.
word patch.
will5 said:
Can we confirm that the bootloader it's still locked, right?
If thats true, we can forget proper customs roms.
Click to expand...
Click to collapse
still locked.
sahilarora911 said:
Thanks for the link.. Have you tried it??
I'm unable to download.. opens a pop-up..
Click to expand...
Click to collapse
yep. Updating. Try to find another way to update from GB leak. Not from froyo.
Also I guess there is no fastboot commands.
So, unlocked bootloaders coming Q4 should be only for other phones.
Let's see if at least this updates brings a newer kernel.
will5 said:
Also I guess there is no fastboot commands.
So, unlocked bootloaders coming Q4 should be only for other phones.
Let's see if at least this updates brings a newer kernel.
Click to expand...
Click to collapse
Yep. We have an update in kernel rather than the old leak kernel.
Cool. Now we need to make 2init work with this kernel. And a custom rom based on gb. Is there a defys cm7 based on gb?
will5 said:
Cool. Now we need to make 2init work with this kernel. And a custom rom based on gb. Is there a defys cm7 based on gb?
Click to expand...
Click to collapse
No, at least for now. But I think DEFY team will consider building a GB based CM8 for android 4.0. Since our GB kernel can boot defy/defy+ GB ROM
I really hate that 115.com download site. It never seems to work here. I'll just wait untill there are some usable mirrors.
I'm currently downloading on my server
The first file is here : http://android.loicg.net/roms/signed-delta-ota-Blur_Version.2.6.0-45.1.zip
and the second : http://android.loicg.net/roms/MLS2G...LESTONE2GCCORE_P018_A030_HWp2a_Service1FF.rar
Is it rootable? Has someone tried to root it?
Here are some mirrors for you:
http://mir.cr/FGIEBRFY
Has anyone tried it yet?? Any comments or reviews would be nice.
Flashing 2.6 rigth now, already downloaded the OTA, just a few more minutes I supose for the upgrade, later, a mini review, and if I can root a nandroid backup.
Until now, just flash, wipe cache/data... Boot Ok!, I have to rename the OTA file name to update.zip
I got signature fail from the update package :'(
Bad copy, just download again, and it work!
Appying update now
Update Succesfull, Kernel Version [email protected] #1
Build 4.5.3-109_MS2
I guess root only will work replacing smg files
julianlatasa said:
Flashing 2.6 rigth now, already downloaded the OTA, just a few more minutes I supose for the upgrade, later, a mini review, and if I can root a nandroid backup.
Until now, just flash, wipe cache/data... Boot Ok!, I have to rename the OTA file name to update.zip
I got signature fail from the update package :'(
Bad copy, just download again, and it work!
Appying update now
Update Succesfull, Kernel Version [email protected] #1
Build 4.5.3-109_MS2
Click to expand...
Click to collapse
U can give this a try for rooting..
http://forum.xda-developers.com/showthread.php?t=1235938
Dunno if it will work or not..
will5 said:
I guess root only will work replacing smg files
Click to expand...
Click to collapse
Droid 3 has a method of rooting that works on our GB roms.
Sent from my Milestone 2 XDA App
http://android.clients.google.com/packages/ota/google_crespo/ZD3PyN0t.zip
This is about 160M
Tested on my i9020T
sorry for not posting the version, cuz I was hurry to the bank~~
marsrogers said:
Added the version.
This is a full rom.
I grabbed from my phone when it was downloading the update. I was in 2.3.4 at that time.
In some country, the OTA will first update to 2.3.6 and then the 4.0. In US, directly to 4.0.
Click to expand...
Click to collapse
I admit I was a bit too hurry on this post.
For I9020T/I9023?
I agree, really need to post what version it's for... I've seen some people reporting bricks lately because they got trigger happy and flashed the update without making sure it was compatible with their model.
tehgeekguy said:
I agree, really need to post what version it's for... I've seen some people reporting bricks lately because they got trigger happy and flashed the update without making sure it was compatible with their model.
Click to expand...
Click to collapse
I can confirm it works on I9020T
I went from CM9 Kang to this with just a wipe and everything is working as expected
Please
Can someone verify the OTA
2.3.6 => 4.0.3 OTA has network registering issues in my country
It takes 2 minutes to find and register on a network after boot when EDGE only on
May be this will help the issue
DToX69 said:
I can confirm it works on I9020T
Click to expand...
Click to collapse
Current version is 2.3.7 Oxygen ROM.
So I just copy it into the sdcard, boot into recovery, wipe, flash this ROM and done?
Added the version.
This is a full rom.
I grabbed from my phone when it was downloading the update. I was in 2.3.4 at that time.
In some country, the OTA will first update to 2.3.6 and then the 4.0. In US, directly to 4.0.
kongkkm said:
Current version is 2.3.7 Oxygen ROM.
So I just copy it into the sdcard, boot into recovery, wipe, flash this ROM and done?
Click to expand...
Click to collapse
Yes that should work, make a backup just in case though
Works fine on I9023
Android4.0.3 official full ROM for Nexus S !!
This is ICS4.0.3 official full ROM for GSM Nexus S,enjoy!
I9023&I9020T
Android 4.0.3/IML74K/XXKI1 Radio/KL1 Bootloader
Official, signed, can flash with ClockworkMod or stock recovery. Contains recovery, radio and bootloader.
Download link:
httpDELETE ME://android.clients.google.com/packages/ota/google_crespo/ZD3PyN0t.zip160.77MB
CAUTION:AFTER FLASH THIS ROM,YOU MAY LOOSE ROOT ACCESS AND CMW RECOVERY,THEN THIS ATTACHMENT MAY HELP YOU
View attachment 820969
It works well on my EUR-I9023 include root access and CMW recovery
Is this for all GSM versions of Nexus S? CDMA?
Hope WiFi works for I9023 in this one !
DarkAgent said:
Is this for all GSM versions of Nexus S? CDMA?
Click to expand...
Click to collapse
Let's analyse this, shall we?
sclyeah said:
This is ICS4.0.3 full ROM,enjoy!
FULL ROM:
I9023&I9020T
Android 4.0.3/IML74K/XXKI1 Radio/KL1 Bootloader
Official, signed, can flash with ClockworkMod or stock recovery. Contains recovery, radio and bootloader.
Download link:
httpDELETE ME://android.clients.google.com/packages/ota/google_crespo/ZD3PyN0t.zip
Click to expand...
Click to collapse
Enhance...
sclyeah said:
...
I9023&I9020T
...
Click to expand...
Click to collapse
Enhance...
sclyeah said:
I9023&I9020T
Click to expand...
Click to collapse
Enhance...
sclyeah said:
I9023&I9020T
Click to expand...
Click to collapse
Enhance...
sclyeah said:
I9023&I9020T
Click to expand...
Click to collapse
Enhance...
sclyeah said:
I9023&I9020T
Click to expand...
Click to collapse
Enhance...
sclyeah said:
I9023&I9020T
Click to expand...
Click to collapse
Enhance...
sclyeah said:
I9023&I9020T
Click to expand...
Click to collapse
That was the post of the Year...
david279 said:
That was the post of the Year...
Click to expand...
Click to collapse
+ 1 xD
Sent from my CyberGR Nexus S
SO WHICH IS IT!?
Here
http://android.clients.google.com/packages/ota/google_crespo/ZD3PyN0t.zip
Im not sure, but isn't this only update from 2.3.4? Someone said this in the INFO 4.0.3 thread
Lordofminor said:
Im not sure, but isn't this only update from 2.3.4? Someone said this in the INFO 4.0.3 thread
Click to expand...
Click to collapse
I had a ICS rom before this when it worked perfectly but now I ve lost root access and I cant enter recovery (CMW) anymore, a dead android robot appears and the recovery sorta flashes but then restarts again into ICS
DO NOT FLASH
YOU WILL LOOSE ROOT ACCESS AND CMW RECOVERY
I was new to rooting and this stuff but after hours or research I have solve this
Flashed the SU update zip and then flashed recovery from Rom Manager and its working again
david279 said:
That was the post of the Year...
Click to expand...
Click to collapse
Couldn't agree more. Tea and keyboard in perfect harmony....
TrueYears said:
I had a ICS rom before this when it worked perfectly but now I ve lost root access and I cant enter recovery (CMW) anymore, a dead android robot appears and the recovery sorta flashes but then restarts again into ICS
DO NOT FLASH
YOU WILL LOOSE ROOT ACCESS AND CMW RECOVERY
Click to expand...
Click to collapse
follow this
http://forum.xda-developers.com/showthread.php?t=1396959
In case CWMR disappears after every reboot, i fixed by installing it directly from rom manager and then stucks there.
Is there an easy way to get something VERY close to stock final ICS but with root and cwm?
I'm not a fan of custom kernels and custom roms.
Sent from my LT18i using Tapatalk 2
Flash official ICS, flash custom kernel , the modded stock one, flash the superuser fix , download busybox
Stock ICS with route and cwm
No other way
Sent from my LT18i using xda premium
CrazyPeter said:
Is there an easy way to get something VERY close to stock final ICS but with root and cwm?
I'm not a fan of custom kernels and custom roms.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
if you are unlocked to don't have to keep the custom kernel. you can just hotboot the kernel, flash the zip and then reboot and it will be like you never flashed the kernel but you will be rooted.
Pvy.
pvyParts said:
if you are unlocked to don't have to keep the custom kernel. you can just hotboot the kernel, flash the zip and then reboot and it will be like you never flashed the kernel but you will be rooted.
Pvy.
Click to expand...
Click to collapse
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Simple
Flash.custom kernel.with flashtoll
Download superuser.zip from doomed151 in original thread
Flash the superuser.zip through cwm
Download busybox from market
There you have root
Sent from my LT18i using xda premium
chiefy009 said:
Simple
Flash.custom kernel.with flashtoll
Download superuser.zip from doomed151 in original thread
Flash the superuser.zip through cwm
Download busybox from market
There you have root
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Where does ICS fit into that? It's not even mentioned? What's flashtoll?
CrazyPeter said:
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Click to expand...
Click to collapse
or
boot into fastboot mode
get kernel boot.img with CWM
http://forum.xda-developers.com/showthread.php?t=1591279
then run the command
Code:
fastboot boot boot.img
be sure to spam vol - or back or what ever the kernel requres to get into CMW on reboot.
flash the SU.zip
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
cant remember who linked that one
reboot and the kernel will be gone
enjoy rooted phone.
Pvy.
CrazyPeter said:
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Click to expand...
Click to collapse
You need fastboot.exe. If you have it then first download the SuperUser zip file from here:
http://forum.xda-developers.com/showpost.php?p=24825517&postcount=105
And put it on your SD card.
Then download any kernel that has CWM support. There is one here:
http://forum.xda-developers.com/showpost.php?p=24826349&postcount=110
Then put your phone into fastboot mode (turn it off then plug it in while holding the Back button - the LED will turn BLUE - if it doesn't then try plugging in while holding the MENU button instead, I can never remember which one it is).
Then copy the kernel to your device like this:
fastboot boot recoveryARC.img
Your device will reboot - when the SONY logo goes bright start spamming the VOLUME DOWN button to enter Recovery.
Then flash the SuperUser.zip file from your SD card. Unplug the phone, reboot and you have root access. You should then head to Google Play and download Busybox Installer and install the latest release.
Good luck.
Isn't this the naff Chinese leaked build? Not the final one?
I think i'll wait for the dust to settle, too much hacking and failure stories right now, along with "fluff" from leaked betas and prereleases and lt15i owners trying to get stuff working.
This is the final release. I love it FWIW.
However, installing it was a PITA - I bricked my device three times before I got it right using Flashtool. But it's worth it - I've been running the beta since it was released and the performance of the final release is MUCH better.
Plus they seem to have supercharged the launcher - I'm only getting a redraw if I've been running a heavy game (Temple Run for example). The beta version would reload the launcher a lot.
There will be a new version of Flashtool that will allow the official FTF to be flashed without all the hassle - might be worth waiting for. The issue is with changing the partition table or something.
only fastboot doomkernel
then install su by recovery
then flash stock kernel by flash tool & exclude all other option
and reboot
please can someone find a way too root this firmware without unlocking the bootloader??
omarfaieq007 said:
please can someone find a way too root this firmware without unlocking the bootloader??
Click to expand...
Click to collapse
You might have a long wait. The .62 release never got rooted.
Sent from my LT18i using XDA App
if i unlock bootloader then
flash ics using flashtool
custom karnel or hotboot(how to work with hotboot?)
recovery img (optional)
su by recovery
after that if i lock bootloader.... ll root work ? n can i get ota future updates ?
chiefy009 said:
Flash official ICS, flash custom kernel , the modded stock one, flash the superuser fix , download busybox
Stock ICS with route and cwm
No other way
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
TenkaTsai said:
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
Click to expand...
Click to collapse
how did u sort out it's without unlocking bootloader
can anyone from china confirm or at least translate?google translate fails..
TenkaTsai said:
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
Click to expand...
Click to collapse
Can you upload that rar file here?
here the root file for ics but i didnt check
regards
rasgula said:
here the root file for ics but i didnt check
regards
Click to expand...
Click to collapse
Thank you so much..I will try and report back..
Edit: I ran the command..nothing happens after restart and no superuser..it recognizes the phone though..
Doesn't work on ARC S. tried on Official ICS released yesterday.
I can't seem to find a link for the version of TWRP that will work on model P3113. I have CyanogenMod 10 Rom JB 4.1.1 with Clockwork Mod 6x.
Can I even install TWRP over CWM6 and can I do it in Mobile ODIn Pro? I have that installed.
I also have Goo Manager and cannot figure out why I cannot find or download TWRP from there unless they do not have a version for my Model or that ROM/Kernel?
I am new to the forum so I cannot ask questions yet in the developer sections which is starting to get annoying since I had one or two threads I could have asked this question on.
Thanks
Use goo manager to install twrp.
Sent from my SGH-I727 using Tapatalk 2
scottx . said:
Use goo manager to install twrp.
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I have tried that method and it cannot find any files to download
androidfr33k said:
I have tried that method and it cannot find any files to download
Click to expand...
Click to collapse
Use mobile Odin if you have the proper files. Why do you want twrp instead of cwm?
scottx . said:
Use mobile Odin if you have the proper files. Why do you want twrp instead of cwm?
Click to expand...
Click to collapse
Just wanted to try it. So this brings me back to my first question. Is there a compatible version for the Samsung galaxy tab 2 7 inch running cyanogenmod10 latest nightly build?
I Google searched and searched within Samsung forum. I found a version 2.2.1 but I think it was for a hero touch
androidfr33k said:
Just wanted to try it. So this brings me back to my first question. Is there a compatible version for the Samsung galaxy tab 2 7 inch running cyanogenmod10 latest nightly build?
I Google searched and searched within Samsung forum. I found a version 2.2.1 but I think it was for a hero touch
Click to expand...
Click to collapse
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
scottx . said:
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
Click to expand...
Click to collapse
Will this version work on the p3113? The linked file is p3110
Thanks
I just thought about what you said that cwm recovery has nothing to do with ROM but according to the guide I used it said I had to use a cwm version 6 with JB. so that is why I mentioned the ROM version because it was based on JB. So would you not think it does indeed play an important role in choosing a compatible recovery?
androidfr33k said:
I just thought about what you said that cwm recovery has nothing to do with ROM but according to the guide I used it said I had to use a cwm version 6 with JB. so that is why I mentioned the ROM version because it was based on JB. So would you not think it does indeed play an important role in choosing a compatible recovery?
Click to expand...
Click to collapse
Developers or tutorial writers list the recovery because thats the one they preffer / use themselves, but most of the time, it doesnt matter which one you use!!
Btw, the reason they say to use CWM6 with Jelly Bean, is because CWM will automatically stop JB from erasing CWM and returning the stock recovery,
but even if you flash with lets say CWM5, you can still remove the script that will undo CWM, but you will have to do it manually (it's an extra step)
scottx . said:
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
Click to expand...
Click to collapse
Will this version work on my GT-P3113?
Thanks
Try this one by nycbjr. It's not the official one, but it is known to work with the P3113
http://rootzwiki.com/topic/27140-recoverytouchtwrp211galaxy-tab-2-7-and-10662012/
androidfr33k said:
Will this version work on my GT-P3113?
Thanks
Click to expand...
Click to collapse
Yes. Works fine on any 31xx. I ran it on my 3113 for a while before cwm came out.
fifth time I try to install 4.1.2 CM10 ... using a500 recovery
but always lock this part (look at picture), waited 30 minutes and nothing besides, I'm using ROM-lightspeed 4.7, since I installed it, I can't use any ROM of CIVATO (4.1.2 or 4.0.4)
http://imageshack.us/photo/my-images/198/img201301141135540.jpg
anyone?
Verdeee said:
anyone?
Click to expand...
Click to collapse
Do u have the v8 ICS unlocked bootloader?
See guides in my Sig
Sent from my GT-I9300 using Tapatalk 2
Verdeee said:
fifth time I try to install 4.1.2 CM10 ... using a500 recovery
but always lock this part (look at picture), waited 30 minutes and nothing besides, I'm using ROM-lightspeed 4.7, since I installed it, I can't use any ROM of CIVATO (4.1.2 or 4.0.4)
Click to expand...
Click to collapse
Shooting in the dark here...
Is by your boatloader compatible?
Does your recovery support the Google api version in the Rom?
Have you tried any other roms?
Have you tried flashing to a different recovery and then flashing your rom?
Verdeee said:
fifth time I try to install 4.1.2 CM10 ... using a500 recovery
but always lock this part (look at picture), waited 30 minutes and nothing besides, I'm using ROM-lightspeed 4.7, since I installed it, I can't use any ROM of CIVATO (4.1.2 or 4.0.4)
http://imageshack.us/photo/my-images/198/img201301141135540.jpg
Click to expand...
Click to collapse
just had a another look at your pic....bit easier to see on my pc!!!
You're running cwm 1.3.4 this is an HC only recovery -
You're trying to flash a JB rom so you will definitely need the unlocked bootloader and one of the recovery's that come with it
Once you get that sorted you'll be all good!!!
Thanks, now I have another problem, I installed acer's driver and selected debug mode, but the manager appears acer "No Acer Connected" but I can open the tablet folders on the pc, what am I doing wrong?
sorry, now i have recovery Version CWM rev1.7.3 and bootloader Version 3.0.1 .. I Can install JB CM10?
Verdeee said:
sorry, now i have recovery Version CWM rev1.7.3 and bootloader Version 3.0.1 .. I Can install JB CM10?
Click to expand...
Click to collapse
No, no m8 u must flash v8 bootloader first and you must have yr cpuid for that. If u flash that rom without the v8 youll brick it
Two stickys in dev forum...one for v8 and one for cpuid.
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 07:01 AM ---------- Previous post was at 06:19 AM ----------
Verdeee said:
Thanks, now I have another problem, I installed acer's driver and selected debug mode, but the manager appears acer "No Acer Connected" but I can open the tablet folders on the pc, what am I doing wrong?
Click to expand...
Click to collapse
Youll need the drivers from the android sdk too..theres a mini sdk zip in the cpuid guide, bottom of the first post. Instructions to set those up are in that post as well
Dowload the apxflash manager tool, its the easiest way to install the bootloader and retrieves your cpuid too...at the first screen choose 'bundle market' option and then bundle number 17.... Also choose option to dump and save your 'bct' when u get to that screen.
If u follow things carefully youll have no probs
Good luck
dibb
Sent from my GT-I9300 using Tapatalk 2
i installed "904 KiB A500_A501_ICS_V8_green_bootloader.a500apx" from this link http://skrilax.droid-developers.org/a500/nvflash/images/ is it? because my bootloader says 3.0.1
Verdeee said:
i installed "904 KiBA500_A501_ICS_V8_green_bootloader.a500apx" from this link http://skrilax.droid-developers.org/a500/nvflash/images/ is it? because my bootloader says 3.0.1
Click to expand...
Click to collapse
U must install the unlocked bootloader v8.a500.apx file with the apxflash tool so yes thats why you still have 3.0.1
Sent from my GT-I9300 using Tapatalk 2
link of file? please ;D
Verdeee said:
link of file? please ;D
Click to expand...
Click to collapse
M8 theres only one way to get the v8 installed at thats with nvflash or apxflash...trying to install it with an app or flashing it in cwm wont work!!
You must read the guides and if u dont get your cpuid and use it, then you will end up bricking yr tab....Please understand this.
The links are stickied in the dev forum like I said before...there's even a couple in my sig...
Sent from my GT-I9300 using Tapatalk 2