[Q] Htc Surround Language Help - Surround General

hi i have a question, i have At&t Htc Surround on english i need it in spanish how can i change language? the option is black, do i need to flash whit other rom? what rom? thanks sorry for my bad english

Michrlz said:
hi i have a question, i have At&t Htc Surround on english i need it in spanish how can i change language? the option is black, do i need to flash whit other rom? what rom? thanks sorry for my bad english
Click to expand...
Click to collapse
Hello! Download and install language packs from here

i tryed to install language and i have error None of the packages in the update are applicable, i updated is to 7.0.7008.0 from 7.0.7004.0 and work ok i need to install spanish please

Michrlz said:
i tryed to install language and i have error None of the packages in the update are applicable, i updated is to 7.0.7008.0 from 7.0.7004.0 and work ok i need to install spanish please
Click to expand...
Click to collapse
What version of WP installed on your device? Please sent information about your phone, displayed in Settings -> About

os version: 7.0.7008.0
hardware revision number: 0003
Radio software version: 5.51.09.06_22.30.50.09H
Radio Hardware version: A.26.0.D4
Bootloader version: 1.3.2250.7(111288)
Chip SOC version: 2.2.5.0

INSTALL WP7 UPDATE TOOLS
1.First make sure you have Zune 4.8 final (build 4.8.2345.0)
2.Download the WP7_update_tool.rar and install the UpdateWP package for your platform (x86 or x64).
3.Download the WP7 Update Cab Sender.zip from xboxmod and extract it. This also contains a patched version of UpdateWP.exe which will work with Zune 4.8 final.
INSTALL THE UPDATES AND LANGUAGES
1.Copy all the CAB files you downloaded to the folder where you extracted xboxmod's WP7 Update Cab Sender. The CAB's should be in the same folder as the BAT-file.
2.Run the batch-file.
3.Your device will reboot and start in download-mode.
4.You'll see progress on the screen of your desktop, but it may take more than 10 minutes before your WP7 device is starting to show a progress-bar, even for small updates. That's normal, because the device is scanning for installed packages and performing merges.
5.When the update is ready, your device will be rebooted again and it will boot Windows Phone with new version and languages.
1) download and install this cabs
http://download.windowsupdate.com/m..._7fea4585c1275be10e4c06adffb3c4e42372f7d2.cab
2) than delete from folder cabs, used in step 1, and install this
http://download.windowsupdate.com/m..._35616816bdd0b9c08e39cdbab9fc9f7bfafec5ac.cab
http://download.windowsupdate.com/m..._669700d5014b3a9c73fe81390281620ca29d0675.cab
http://download.windowsupdate.com/m..._3a3a18fff5252d787974a169b115f8b428c0566c.cab
3)
http://download.windowsupdate.com/m..._5787b956938cb2b6d09892934b38dd9fd88f25ab.cab
4) than
http://download.windowsupdate.com/m..._b173cb8bd37eae4b0e5974891967bcae1eb285db.cab
5)
http://download.windowsupdate.com/m..._af342c3af8880359d4ecffac3bf17c8e2e586599.cab
http://download.windowsupdate.com/m..._268000b46b0dad9d5d51ce762ee73e5e4ae1f341.cab
6)
http://download.windowsupdate.com/m..._2cb1bfdd82133914239b8ee1a78e61e9000d124a.cab
http://download.windowsupdate.com/m..._c9b7f3bc5bb340ba30473b566b4557de0cf3322e.cab
7)
http://download.windowsupdate.com/m..._9dc85b25de5f2e11d7649ce4fbc0a30a6918fab9.cab
8)
http://download.windowsupdate.com/m..._8c6fb6f36770b4f517be920a23d8600a1c127232.cab
http://download.windowsupdate.com/m..._97df86b81a40df06bb2b15c6739e2ee772e53bbf.cab
9)
http://download.windowsupdate.com/m..._d500a10eeb11fb6c1913adac4759d67185474d3e.cab
http://download.windowsupdate.com/m..._24bb20423e86130365686c1796577d4b22343be9.cab
10)
http://download.windowsupdate.com/m..._113460c78ac6233e3bb776ceddb6ac94e98c4221.cab
http://download.windowsupdate.com/m..._4dbf7302a7b3da01eeafbcfbf1b9b75e6f6de15e.cab
11)
http://download.windowsupdate.com/m..._69aaa5b4911d99c4669344254bfa7ba5f8cd0408.cab
http://download.windowsupdate.com/m..._09cab7985d025414c9923461e0a0729d95ec6737.cab
At FIRST update press "B" in batch-file. It will make backup. All other updates make with pressing "S" (wihout backup)!!!
But this method need a lot of time.
Better and fasteer is to flash custom ROM, but all information will be erased.

i have error in the 4 step what custom rom can i use?

Michrlz said:
i have error in the 4 step what custom rom can i use?
Click to expand...
Click to collapse
For example this Cerebellum ROM

can i install that direct with ROMUpdateUtility.exe?

how to flash that custom rom? do i need to put it in HSPL ?

Related

here is the Solution for Disconnected Arabic Words in MDJ's CyanogenMod7 & Other

Here We Go:
After Playing With the Fonts & bla bla bla. on my HD2 MDJ's CyanogenMod7 v2.5 & 2.6, i got my arabic RTL working good and Words are connected in sms, browser, apps, etc..
Download:
RTL PATCH ( attached )
FONTS ( attached )
Arabic Keyboard ( from the market )
Instruction:
1: Extract rtl-auto-patcher-0.0.4.zip
2: open the AndroidRTLPatcher.exe
3: Connect your Android Phone via USB
4: Click on TEST CONNECTION
5: if you using MDJ's CyanogenMod7 tick the same as the picture down:
PIC attached ( RTL Screenshot )
6: Click on Go Go Go !
7: wait until it asks to reboot the phone click yes and you done With RTL Patch.
Fonts:
1: extract the fonts & copy to your Memory Card
2: use ROOT EXPLORER (download from Market )
3: Copy the two fonts into the system/fonts and replace them.
4: download Keyboard of your choice from the market & Restart The phone>
5: you Dont you must have the same font as shown down
Screen shot attached ( arabic on HD2 )
Feel Free to ask..
wail alqasmee
nobody hav tested o tryd it.. cmon guys. i need ur rply if it works
would try it, but google prevents syrians from downloading programs from their site.
and I'm too lazy/wary of using routers and such, plus, using them in the past has put me through some troubles so...
I'll see if there's a workaround or something
Hey i've uploaded THE RTL Patch on Mediafire you can download the attached file to get the link
can we get Hebrew by same way???
i dont know how to.. but if you hebrew font from using PC font rename the font to DroidSansHebrew and replace it and check... if not than try with another font..
Hey Guys Guess WIth the RTL Patch i tested with the same uploaded fonts on
HD2 CoreDroid DHD V1
And arabic is working fine on it. connected letters..
thanks, I tried it but somehow the program doesn't find my phone
do I need the SDK for that or what?
I haven't got it yet because I don't want to go installing pointless programs on my PC. plus I can't download the SDK from Google's because of the block >.>
great work keep it up
this is funny, but when I manually added your font in the fonts library, it solved most of my problems :S
thanks
many many thanks for this
but i have an issue here,
the patch detects the phone & build without the type, i choose NAND as my rom manually, the patch starts to the point that it stops with error, something about it cant replace the files coz they are in use, says to try from recover mode, rebooted and tried from CWM but it also failed to apply the patch.
so i replaced the fonts manually, rebooted, arabic letters is connected with some letters not showing the right way, and of course no RTL
is there a solution ? i could live without RTL, just want all the letters to show the right way
can you check if HTC SYNC is open , otherwise close it and try again , that's work for me
aymen_ben_ammar said:
can you check if HTC SYNC is open , otherwise close it and try again , that's work for me
Click to expand...
Click to collapse
of course HTC Sync is off
everything works fine, to the point of the patcher starts " Patching Device " , it works for a couple of seconds then it fails
it says " File transfer Failed Because The System is in use it is recommended to start your phone in recovery and try again "
i tried patching from clockwork recovery mode with no luck
thanks anyway, i managed to solve it manually on my own
The RTL patcher in this post is really old.
I've since created a newer version with broader compatibility and better device detection: See here.

Re-Updating to Mango? (I need to add Display Language)

So...I have already updated to Mango (after many hacks and some problems courtesy of Microsoft's and LG's lack of communication), but I realized that my country's display language is missing. I found a hack here that involves the reverting of the OS to the previous one (NODO). Unfortunately, I did a format in my PC, so I lost the data for re-installing NODO.
Is there a way to re-install NODO or adding a display language without having to revert to NODO first?
Do the community a BIG FAVOR and SEARCH first....
Is there a way to re-install NODO or adding a display language without having to revert to NODO first?
Click to expand...
Click to collapse
How on earth could you re-install NoDo without first having to revert to NoDo????
1. You must Revert back to the very ROOTS (Factory ROM) (See end of Post for Info)
2. THEN to Pre NoDo/NoDo
3. Once you actually upgrade to NoDo
a. On your device, open the registry editor. (##634# menu)
b. GoTo [HKEY_LOCAL_MACHINE\MUI\Available]
c. Add a new string value for your locale, eg. Key "0413" on Data enter "Nederlands" and press SET , or see below for other languages.
16 Languages supported In Mango:
"0413"="Nederlands"
"0809"="UK English"
"0419"="Русский" (Russian)
"0405"="Čeština" (Czech)
"0816"="Português (Portugal)"
"0C0A"="Español"
"040B"="suomi" (Finnish)
"0409"="US English"
"0804"="中文(简体)" (Simplified Chinese)
"041D"="Svenska"
"040C"="Français"
"040E"="Magyar"
"0414"="Norsk"
"0406"="Dansk"
"0407"="Deutsch"
"0408"="Ελληνικά"
"0416"="Português (Brasil)"
"0410"="Italiano"
"0415"="polski"
"0412"="한국어" (Korean)
"0404"="中文(繁體)" (Traditional Chinese)
"0411"="日本語" (Japanese)
4. After you apply Reg Hack for additional languages, THEN Upgrade to Pre Mango/Mango
(VOILA!)
Click Here for More Info How to Revert back to Factory Firmware and then to Mango
Ok...I was initially looking for a way to revert back to Nodo without having the Zune backup data... I did it by re-flashing the original firmware following this procedure here:
http://forum.xda-developers.com/showthread.php?t=935578
Thank you and all the other people in this community for actually giving sense to my phone!

ZTE Open - oficial upgrade (V1.0 and V1.1)

ZTE has turned out a new SD Card upgrade today, see for e.g. European Standard / V1.1: http://www.ztedevices.com/support/smart_phone/cba40ed6-d3ab-44c0-bdee-3a15803dc187.html
Thank you for the info
I flashed it now.
FYI - all personal settings are resetted
is there any info about changelog?
(could not find any changes to prior 1.1
is there any possibility to save / backup settings & apps?
(like titanium backup on android?)
thank you in advance
br
ps:
still no POP3 mail
is car navigation possible with "here maps"?
What is diference between this to ver.;
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.1)
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.0)
xtimex said:
What is diference between this to ver.;
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.1)
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.0)
Click to expand...
Click to collapse
Hello,
Both zips upgrade to V1.1.0B02
depending on your existing version you have to use the depending zip file
- if you already upgraded official V1.1 => first file
- if you run 1.0 => second file
br
tnx
Ok
I need to do that, but this updates is only for European devices, I tried to update from Colombia and Movistar's carrier and I couldn't !!

[ROM] Droid Mini/Maxx/Ultra L!te FW 4-21 ML

All developments are carried out thanks to donations on Purchase of these or other devices
thank
Please do not copy files to other file shares
the project is under constant development and refinement
Project name ROM Droid Mini/Maxx/Ultra L!te FW 4-21 ML
Tagline Faster Lighter Economical
SYSTEM Firmware SU4-21 Multilingual
- firmware Deodex - allowing resources using modifiers such GravityBox apply all when firmware odex, it sometimes limited customization or going awry
- tzdata 2015e
- icudt51l last
- return "the gesture of the Jedi" (after installing the firmware of the old sensor /*** it does not threaten the phone)
- delete more apps VZW & MOTO
- replaced by sound WirelessChargingStarted
- old gapps for long work phone
- uppdate apps Chrome, LatinIME, Skip, TouchLess, MotCamera, MotGallery, Migrate
- tetering work
- removed a lot of the background services collect and send data on the type of phone DropBox, MotoCare, MotoConntect, Drive, FaceLock ... etc.
- added Russian, Ukrainian language
for Unloked Device
Install for Custom Recovery
Root not PreInstalled
Download there https://yadi.sk/d/jp8ykQqFindY8/Droid
for Loked Device
Install for QDLoad9008
Root, Xposed, BusyBox is PreInstalled
- Root SuperSU v2.46
- XPosed 2.6.1
- BusyBox v30
DISCLAIMER
Author is not responsible for totally bricked devices, broken arms, legs, plane crashes and your wife's cheating.
All actions taken is your own risk.
Instructions to install
You:
- shouldn't be afraid of Qualcomm HS-USB QDLoader 9008;
- do not change any files, pathes;
- can install drivers manually;
- need to install python-2.7.9 and pyserial-2.7.win32;
- unzipp _Rus_4_4_4_VZW_SU6-7_BL_V30.BA_Stock.rar to Cython27;
Method is dangerous, however gives results.
you must have firmware SU6-7 receiving is not in the form of an update (OTA) and stitched through the RSD Lite.
00 Flash CFC-obakem_verizon-user-4.4.4-SU6-7-release-keys.xml firmware
01 Unzipp everything to Cython27.
02 Run BLBROKE.bat.
03 After you got Qualcomm HS-USB QDLoader 9008, install drivers manually
04 Run RUN_Rus_Part1.bat. Parts XX of system.
*** You can also run a file if you are sure that your phone can work 4-5 hours with the screen RUN_Rus_VZW_Full.bat
then repeat this step X times (the number of times equal to 6)
while (found next part) do
***
>> fastboot to hold 10 minutes that would have been charged a little phone
>> Run BLBROKE.bat.
>> Run RUN_Rus_Part**.bat. Parts XX of system.
***
end
99 Turn device on. Now you have SU DEODEX PreRooted
installed application Xposed 2.6.1
Xposed launched clicked install, reboot your phone
I see that the application is launched is set app_process 58 (pre-installed in the system) and XPosedBridge.jar 54 version (made with the application)
then uploaded GravityBox [KK], a check mark, the next reboot, and everything works
Drivers, Soft there -> https://yadi.sk/d/p458Cy0XineRC
Scripts, ROM there -> https://yadi.sk/d/kxbxpTnziSg35/Droid/4.4.4 SU4-21
Please do not copy files to other file shares
the project is under constant development and refinement
XDA:DevDB Information
[ROM] Droid Mini/Maxx/Ultra L!te FW 4-21 ML, ROM for the Motorola Droid Ultra
Contributors
CrashXXL
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Android 4.4.4 SU6-7 (Flash on RSDLite)
Version Information
Status: Stable
Current Stable Version: 1.02
Stable Release Date: 2015-09-01
Current Beta Version: 0.01
Beta Release Date: 2015-08-15
Created 2015-10-08
Last Updated 2015-10-08
Reserved
Reserved
Update Available
Log
- Launcher with a mesh 4 * 5 with no search string
- Smart Action Moto return ... The assistant working all options
for blocked Patch_SmartAction_Launcher.4x5.NoBar.rar https://yadi.sk/d/kxbxpTnziSg35/Droid
for unlocked MotLauncher.4x5.NoBar.zip https://yadi.sk/d/jp8ykQqFindY8/Droid and SmartActions.zip https://yadi.sk/d/jp8ykQqFindY8/SmartActions
Reserved
I'm a bit confused here. A few months ago I used your set of steps to upgrade to SU6-7 with permanent root (even though I still have locked bootloader). Does this new set of steps allow downgrading to SU4-21 and then the ability to use Sunshine to unlock bootloader? Thanks!
Can I do Write Protection with this ROM?
OscarBrito16 said:
Can I do Write Protection with this ROM?
Click to expand...
Click to collapse
Write protection is still enabled so the root is limited as far as what you can do with it.
classic757 said:
Write protection is still enabled so the root is limited as far as what you can do with it.
Click to expand...
Click to collapse
I mean to install a custom recovery or flash a custom rom!
No, you would not be able to install a custom recovery with method. Unless you have su4-21 or lower your bootloader is locked and at this time there isn't a method to unlock it.
Also you can't downgrade to an older su version, once you have su5-24 or above the qfuse is blown.
As said above you can achieve root, but since the system is still write protected root access is limited. The other option is to perm root your device, and try safestrap, I hope I'm allowed to post that in the thread, sorry if I'm not.
Sent from my XT1080 using XDA mobile app
OscarBrito16 said:
I mean to install a custom recovery or flash a custom rom!
Click to expand...
Click to collapse
Without write protection disabled you cannot install custom recovery or flash custom roms.
Also, if you are on 4.4.4 there is no full root available at this time.
any chance to implement/add Czech language on this ROM?
dcoaster said:
I'm a bit confused here. A few months ago I used your set of steps to upgrade to SU6-7 with permanent root (even though I still have locked bootloader). Does this new set of steps allow downgrading to SU4-21 and then the ability to use Sunshine to unlock bootloader? Thanks!
Click to expand...
Click to collapse
I have the same concerns. Are we supposed to downgrade to the SU4-21???Will this grant us the ability to use Sunshine and unlock our bootloaders?? I thought it wasn't possible to downgrade??? Please I'm lost here I want to do this but I'm am unsure of the outcome?
You can add any language, but it takes a lot of time.
can you tell me how to do it?
- unpack apk
- transtale xml value-en to value-cz
- pack
- install on update from twrp
- check work
@CrashXXL
how can I add the gesture of jedi to my phone? what files do I need to take from your rom?
I do not want to take the whole rom, would be great if i could only take a few files and push the diff to my phone
Can i use this to flash it right over my rooted SU6-7 (rooted with your method months ago, Crash) or do i need to re-flash original stock (without root)?
will my phone be still rooted if i factory reset it..?
I guess this contains only Russian and/or English language, am i right?
Einheit-101 said:
I guess this contains only Russian and/or English language, am i right?
Click to expand...
Click to collapse
no, localization saved and added 2 more Russian and Ukrainian
Yeah, so no German

Oreo open beta 1 Chinese version already available

I guess global version will come within 2 days.
http://www.oneplusbbs.com/forum.php?mod=viewthread&tid=3876301&mobile=2
Step by Step Guide - Android 8.0 Chinese beta. Clean/dirty flash lock/UL BL.
Hello Guys,
To make things easy heres a step by step guide to install the chinese oreo beta on locked/unlocked Bl for the 5T
So I got my hands on the android oreo chinese beta (H2OS) and flashed it on my oneplus 5t which was on a locked bootloader and running stable 4.7.6 with star wars theme enabled. Here's a step by step guide to install H2os Oreo beta rom wtihout losing any data.
WARNING : BACKUP - BACKUP - BACKUP and flash at your own risk. I would not be responsible for any loss.
METHOD 1 : FOR LOCKED/UNLOCKED BL BUT WITH STOCK RECOVERY
1) Download the rom from this link : https://goo.gl/4nPrxx
2) Ensure you have backed up all your important data and make sure you have atleast 50% battery.
3) Copy the downloaded zip to phones internal memory (make sure its in the main directory and not in any folder.
4) Go to settings > system updates > top right hand corner tap the settings icon > tap local upgrade > tap on the downloaded file > tap update now and wait for it to finish installing the update. ( first boot will take 8 to 10 minutes so please dont panic.
5) Once first boot is done you may have a force close for 1 or 2 apps just uninstall them and reinstall from the play store and you are good to go. Also star wars theme continues to work and all basic functions work as expected.
6) If you want a clean install or having many force closures please perform a factory reset and everything should be resolved.​
https://forum.xda-developers.com/oneplus-5t/how-to/step-step-guide-android-8-0-chinese-t3726772
Yup, I'm downloading now. This should be fun.
Mike02z said:
Yup, I'm downloading now. This should be fun.
Click to expand...
Click to collapse
When you're done, can you tell us what exactly has changed? I went to the chinese page, but google translator wasn't so helpful tbh.
devil188 said:
When you're done, can you tell us what exactly has changed? I went to the chinese page, but google translator wasn't so helpful tbh.
Click to expand...
Click to collapse
This update ushered in based on the new Android O (8.0) hydrogen OS
【desktop】
- Optimized application shortcut menu
- Integrate icon options with app shortcuts
- Shot on OnePlus Add photos upload function
【system】
New shortcut settings panel design
- Android O new features, including but not limited to:
****1. Add Picture in Picture function
****2 new auto-fill (Auto-Fill) function
****3 new smart text selection (Smart Text Selection)
- Update Android system patch
Known Issues
1. WeChat fingerprint payment can not be used temporarily
2. Third-party applications may not compatible list, please download the attachment compression package. Android O may not be compatible with the application list. Rar (25.83 KB, Downloads: 364)
This a translation of the update. I used g translate. :good:
It seems to run OK. Obviously some stuff is still in Chinese. I tried to flash TWRP and TWRP booted but even after a clearing cache/Div the ROM then would not boot. I just got a white light.
For initial install I did a complete data format then loaded the stock recovery ,and the latest stable OOS, then flashed the Chinese O.. You do need to pull a PlayStore .APK and reload all the Google apps after a flash.
Unless this one is different than the one they have on their main site, it's not Oreo. I flashed it, tried flashing Gapps and Gapps said I had to flash appropriate Gapps for 7.1 :/
Very nice. Thanks for the write-up!
Already open beta 3 now.

Categories

Resources