Related
Hi
im sure u guys figured it out already - but i can't find the post in which there are instructions how to use adb and my samsung galaxy , cause i get an "device not found" error, and this is because i dont have the f***ing usb driver for my galaxy.
im running win xp sp2, the phone is NOT in storage mode, it IS in debug mode, and nps is installed.
I CANT FIND THE DRIVER FOR THAT "Other Devices -> Unknown device" hardware!!
please help or at least redirect to the post that solves this issue...
thanks!
You need to point it to the USB driver directory in the SDK folder for 1.5, you'll either need to force it or modify the inf file.
It doesnt work properly with the 1.6 driver. I posted a modified driver on the other forum, you can search there:
http://androidforums.com/samsung-i7500/
I recieved my N4 yesterday.
When I try to connect it to my notebook (running Windows 7 Professional), the installation of the MTP driver fails. The error message says something like "driver could not be found". ADB however works without problems. (I allready debugged some apps on the phone.)
I tried installing the drivers from the toolkit, but it didn't work.
On my brothers netbook the MTP drivers were installed successfully. But I can't get it working on my notebook.
Can anyone help me?
mseebass said:
I recieved my N4 yesterday.
When I try to connect it to my notebook (running Windows 7 Professional), the installation of the MTP driver fails. The error message says something like "driver could not be found". ADB however works without problems. (I allready debugged some apps on the phone.)
I tried installing the drivers from the toolkit, but it didn't work.
On my brothers netbook the MTP drivers were installed successfully. But I can't get it working on my notebook.
Can anyone help me?
Click to expand...
Click to collapse
I was just having this problem but I fixed mine by changing the USB port. Not sure if itll help but worth a try.
bigcrav said:
I was just having this problem but I fixed mine by changing the USB port. Not sure if itll help but worth a try.
Click to expand...
Click to collapse
Thanks for your help. I allready tried an other usb port. It did'nt work.
I wanted to avoid it but I reinstalled windows. Now it works. Thanks again.
Hmm, messed with this problem for ages yesterday, mtp installed fine in normal mode but refused when in 'usb debugging' mode
simple fix, find your wpdmtp.inf file in windows/inf
edit it like shown, look for the [Generic.NTx86] and [Generic.NTamd64] entries near the top of the file........
[Generic.NTx86]
%GenericMTP.DeviceDesc%=MTP, USB\MS_COMP_MTP
%GenericMTP.DeviceDesc%=MTP, USB\VID_18D1&PID_4EE2&MI_00
[Generic.NTamd64]
%GenericMTP.DeviceDesc%=MTP, USB\MS_COMP_MTP
%GenericMTP.DeviceDesc%=MTP, USB\VID_18D1&PID_4EE2&MI_00
...then update the driver in device manager, use automatic search
just make sure the 'VID_18D1&PID_4EE2&MI_00' matches your device id, check in device manager.. but i'm guessing all nexus 4 are the same.. usb debugging mode
I did a clean install of windows and that solved the issue for me. Thanksfor your help anyway.
I usually see what drivers do install, like adb or whatever, and then remove/uninstall them AND delete them
Then installed this pack
http://forum.xda-developers.com/showthread.php?t=1998650
then connect to a different USB port and try again with the new drivers
Also, some USB hubs can be under-powered and cause problems.
meangreenie said:
just make sure the 'VID_18D1&PID_4EE2&MI_00' matches your device id, check in device manager.. but i'm guessing all nexus 4 are the same.. usb debugging mode
Click to expand...
Click to collapse
Just FYI, just got a Nexus 4 from T-Mobile yesterday and the device ID is slightly different:
VID_18D1&PID_4EE2&MI_01
01 at the end instead of 00
---------- Post added at 09:11 AM ---------- Previous post was at 08:53 AM ----------
Fitchman said:
I usually see what drivers do install, like adb or whatever, and then remove/uninstall them AND delete them
Then installed this pack
http://forum.xda-developers.com/showthread.php?t=1998650
then connect to a different USB port and try again with the new drivers
Also, some USB hubs can be under-powered and cause problems.
Click to expand...
Click to collapse
How/where do you install those files/drivers? There are no instructions.
lannister80 said:
How/where do you install those files/drivers? There are no instructions.
Click to expand...
Click to collapse
When Windows asks where the drivers are you point to the folder with the ones you want to use...
EddyOS said:
When Windows asks where the drivers are you point to the folder with the ones you want to use...
Click to expand...
Click to collapse
It doesn't ask. I plug in the phone, and Windows says it can't install the MTP driver.
If I go into Device Manager and find the phone (with the yellow triangle and !) and select Update Driver Software, then navigate to the i386 folder from the Universal Naked Driver (on an i5 system), it tells me that "The best driver for your device is already installed" or something similar.
Of course, if I uninstall the device from device manager (and presumably the bad MTP driver as well), it disappears, so I have nothing to point to to install the drivers.
Earlier today I reinstalled the drivers for my N4 on my work PC (Vista Business) and I had to reboot before it recognised the N4 as an MTP Device - prior to that it only saw it as an 'MTP Device'. Now it sees at 'Nexus 4'
I have a similar problem I have a kindle fire
I have install the ADB driver but am having extreme difficulties getting the MTP drivers to work
I have tried everything (every solution on Google)
and nothing works
I've tried the "Media Transfer Protocol Porting Kit"
I tried to get Microsoft help they gave me the run around and confused me even more
here is the conversation
Microsoft: "Thank you for that information
Nathaniel I was checking your product key and it is blocked that is why you can not connect these devices to your computer, you may be a victim of counterfeit software so in this case since it is an OEM computer which means that the manufacture of the computer installed Windows 7 on your computer I recommend you to contact the manufacture of your computer to see if they have an option in order to resolve this issue you are having."
me: when i contact them what do I ask for?
Microsoft: You need to ask for a new product key
me: I am confused what does this mean? that the manufacturer put windows 7 OS on here illegally? but all PC's come with windows OS so every PC in the world is suspect to counterfeiting
them: No, this could be because someone still some information of your computer and use the product key to try to activate Windows until the product key got blocked
No, the name is not involved in this case it is jut the product key
what do I do?
is there an alternative to MTP drivers?
Solved
Hi, i had the same problem described in previous posts and I managed to solve thanks to what is written by meangreenie.
In practice, in the windows\inf of my Windows 7 the file wpdmtp.inf was no longer present but there is only the "compiled" version (wpdmtp.pnf).
I retrieved the file from an earlier version founded in he folder Winsys and so the LG driver are installed without further problems.
Jon McDougal said...
You might be using the wrong driver (Android ADB) instead of the MTP driver. This happened to me the other day!
If you're in Debug Mode, you've already done the first step I was going to suggest.
Here's the second step that worked for me: Open Device Manager -> Click Android Device (top of my list) which exposes "Android Composite ADB Interface" -> Right click that device -> Update Driver Software -> Browse My computer for driver software -> Let me pick from a list of device drivers on my computer -> then choose "MTP USB Device" -> Next
Mine installed the MTP driver and then the N4 opened normally.
Click to expand...
Click to collapse
That works for me with USB Debug ticked and in MTP Mode but not in PTP Mode (on CM10.2-nightly-20130817). I absolutely can't see my pics in no way... (I suppose this is a bug from Google to be fixed in further updates). ADB and FB are correctly working as tested with NexusRootToolkit 1.7.1 Drivers Test.
May it help to delete original DCIM folder and start from a new one??
edit: Shame on me... I forgot that I've formatted my SDcard, so I've no picture in DCIM folder.... Sorry! So I can say that McDougal trick totally worked for me!
try to check the device manager to check the missing drivers with ! mark
Maybe I'm not completely getting the problem, but just doing this worked fine for me:
danielms22 said:
Enable USB debbuging in your phone. Go to Settings -> about phone -> tap about 10 times on build number item until USB debbuging is unlocked.
Also, on your computer go to the device manager, look for your phone, if you find it, right click on it, then update Driver Software, browse computer, Let me pick from a list of device drivers on my computer, USB composite device
That should do it.
Click to expand...
Click to collapse
No need for additional driver download or anything...
Finally a working solution
Finally I found a solution.
Visit answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/mtp-usb-device-drivers-will-not-install-correctly/0ee71b7c-4ae7-403f-abbb-63c7ed9a79f9?rtAction=1387606800207 and search for the "Bret B"'s answer which has also been marked as the most helpful answer. It works perfectly. He simply says..
Go to the Registry Editor (Start –> Run –>type in, “regedit” (without the quotes) then click OK.
Search the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\
Go upto Edit>Find, type in or copy/paste Portable Devices
In the right hand pane you will see the (Default) value “Portable Devices” on the string
Once found, you see a string value called UpperFilters –> delete it!
Reconnect the device. Finished!
I'm having trouble getting the proper usb drivers loaded so i can root my new Nexus 7. I downloaded the Android SDK, unzipped and expanded the google drivers, but my Vista computer keeps giving me an error like "windows found driver software for your device but encountered an error while attempting to install it". It shows the driver as Android Composite ADB Interface. Please help!!
You need to disable your computer's driver signature enforcement.
1)by the way - delete your device from Laptop`s device manager and unplug and plug again cable to you Nexus
2)download last version of ADB and Fastboot
3)check at storage menu - preference - camera (not mtp)
4)enter in developer item in settings menu and check USB debug - Android `ll show your alert message with mac adress of you Laptop - you must accept it
!!! Do not try to use some other sofware for rooting (this is bad idea)- you must doing it in fastboot by myself!!!
I'm trying to install Samsung mobile phone drivers but no matter what I do I miss these drivers when I connect my Samsung Galaxy Y:
CDC Abstract Control Model (ACM)
CDC ACM Data
CDC OBEX Data
CDC Object Exchange (OBEX)
I have googled for solution and I have followed recommended actions (install Kies, install latest drivers, reinstall all, use "have disk" method) on different operating systems (Windows XP, Windows 7) but I got no success.
My phone doesn't boot (I need to flash it with Odin) so I have tried it all in recovery or download mode but I understand it should not really matter as it's Windows issue, not a phone. I'm using original Samsung USB cable.
Could somebody with a working setup could check if they have above devices correctly installed and provide me more information on the driver file? I mean the information from driver details tab in Windows, ie. name of *.SYS file, *.INF file so I could at least check if I have a driver on a disk.
Any other suggestions also welcomed!
Kies is useless & is not required for galaxy y gt-s5360 as it's not supported for firmware flashing on this device so uninstall it
Uninstall any Samsung drivers you have installed from add/remove programmes
Goto my firmware thread at top of Dev section or link in signature
Download & install USB drivers on my thread
Download the firmware from my thread depending on region
Follow the instructions fully
You can manually install drivers if you wish by clicking on unknown device/device with yellow! click have disk & navigate to where you installed Samsung drivers eg c:/programme files/Samsung
It has finally worked (Windows XP)! I have just installed drivers and followed your instructions (with download mode, not recovery mode). Initially I had other unrecognized devices (very generic usb ones) but after a few attempts (usb plug out, usb plug in) the phone has been detected successfully and I managed to flash it. Many thanks!
Sorry, I forgot to mention. I had also removed a battery.
I have the same issue, Could you please paste the links for downloading the drivers.
Trying to get these drivers installed on windows 10 machine but no matter which driver i choose it always pops up "windows encountered an error while installing driver". im trying to get into qpst file explorer to see the policy_man folder for the carrier policy. im on havoc rom 11 and there is no engineer mode(*#801, *#800) or log kit since im not factory rom. ive tried disable driver signature verify under advanced restart on the pc....no luck same error. ive tried disable secure boot in bios on pc....same error.
ive tried these steps......
1. adb reboot ftm
2. Install (in your smartphone) USB Gadget Tool (https://f-droid.org/es/packages/net.tjado.usbgadget/) and check this modes: ( cser.dun.O , diag.diag, diag.diag.mdm , ffs.adb , gsi.dpl , gsi.rmnet , qdss.qdss , qdss.qdss.mdm )
3. adb shell su setprop sys.usb.config diag,diag_mdm,adb
4. Disconnect and connect your phone usb cable.
5. Go to Control Panel – Device Manager. You will see some unknown device. You should look at the so-called "Oneplus 8T", ignore the others.
Right click on the first "Oneplus 8T" –> Update Driver –> Browse my computer drivers -> Let me pick form a list of available drivers -> Click on I Have Disk -> Show all devices, browse then go to the Qualcomm Drivers that you download earlier. Then do the same to the other "Oneplus 8T". Choose 9018 for both unknown "Oneplus 8T"..
6. Add both ports in QPST Configuration. Only one of them is the one you are going to use. By clicking on EFS Explorer you will know which one it is by seeing X55 Driver in the description.
7. Change carrier_policy and carrier_policy.xml_Subscription01 files
8. adb reboot
stuck on step 5
Hmmm... You do have the regular drivers for the device installed as well, correct?
(ADB) works? Try this - (Let me know if you need 32 bit installer) No need to disable driver signing enforcement.
10.99 MB file on MEGA
mega.nz
64bit - If it needs a password it's GADGETSDOCTOR
If you're getting into the use of Qualcomm engineering tools check out the fine work of KL Joachim Schepke and the #u100 Crew to make QXDM5g and the accompanying Tools available, search QXDM5 , also includes driver autoinstaller.
Uninstall the old ones and reboot first, go actually delete the directory, Qcomm doesn't uninstall very cleanly.
Let me know how it goes,
-L4X$
L!V3_4_XC3SS said:
Hmmm... You do have the regular drivers for the device installed as well, correct?
(ADB) works? Try this - (Let me know if you need 32 bit installer) No need to disable driver signing enforcement.
10.99 MB file on MEGA
mega.nz
64bit - If it needs a password it's GADGETSDOCTOR
If you're getting into the use of Qualcomm engineering tools check out the fine work of KL Joachim Schepke and the #u100 Crew to make QXDM5g and the accompanying Tools available, search QXDM5 , also includes driver autoinstaller.
Uninstall the old ones and reboot first, go actually delete the directory, Qcomm doesn't uninstall very cleanly.
Let me know how it goes,
-L4X$
Click to expand...
Click to collapse
Hey thx for the reply....if you mean the oneplus drivers, then yes they are installed on pc and adb works(command prompt and all that).
i uninstalled the old ones and rebooted...downloaded that file and installed....trying now
L!V3_4_XC3SS said:
Hmmm... You do have the regular drivers for the device installed as well, correct?
(ADB) works? Try this - (Let me know if you need 32 bit installer) No need to disable driver signing enforcement.
10.99 MB file on MEGA
mega.nz
64bit - If it needs a password it's GADGETSDOCTOR
If you're getting into the use of Qualcomm engineering tools check out the fine work of KL Joachim Schepke and the #u100 Crew to make QXDM5g and the accompanying Tools available, search QXDM5 , also includes driver autoinstaller.
Uninstall the old ones and reboot first, go actually delete the directory, Qcomm doesn't uninstall very cleanly.
Let me know how it goes,
-L4X$
Click to expand...
Click to collapse
I have tried this and no luck, this is preventing me from using msm to convert my 8t and possibly unbrick if needed. No matter how I install these drivers this is what I get after reboot
"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
msi laptop running windows 10 latest update
JayTheKid said:
I have tried this and no luck, this is preventing me from using msm to convert my 8t and possibly unbrick if needed. No matter how I install these drivers this is what I get after reboot
"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
msi laptop running windows 10 latest update
Click to expand...
Click to collapse
i was able to get device manager to show the device(kb2005) and update/install the driver for that....however, it does not show another kb2005 device, just shows 2 'unknown device'. when i try the update/install driver for the 'unknowns', i get the windows has encountered an error message
with only the one driver installed(shows qualcomm android modem 9018 in device manager under modems tab), i still cant get qpst tools to work without both drivers. in qpst, it shows the correct driver installed as active phones and shows under ports tab....and theres no port to add with add new port
fosgate24360 said:
i was able to get device manager to show the device(kb2005) and update/install the driver for that....however, it does not show another kb2005 device, just shows 2 'unknown device'. when i try the update/install driver for the 'unknowns', i get the windows has encountered an error message
with only the one driver installed(shows qualcomm android modem 9018 in device manager under modems tab), i still cant get qpst tools to work without both drivers. in qpst, it shows the correct driver installed as active phones and shows under ports tab....and theres no port to add with add new port
Click to expand...
Click to collapse
Sorry I was traveling for a little bit - did you get this handled? Sounds to me like you need to make sure that your USB & or wireless debugging is active and not just charging, you can change it on your notifications to transfer files or something like that
L!V3_4_XC3SS said:
Sorry I was traveling for a little bit - did you get this handled? Sounds to me like you need to make sure that your USB & or wireless debugging is active and not just charging, you can change it on your notifications to transfer files or something like that
Click to expand...
Click to collapse
no problem....i was able to get it working thank you. i ended up switching over to android12 evolutionx rom. i had to do that same mod with carrier files and the phone does now pick up 5g signal and 5g icon in stat bar
fosgate24360 said:
Trying to get these drivers installed on windows 10 machine but no matter which driver i choose it always pops up "windows encountered an error while installing driver". im trying to get into qpst file explorer to see the policy_man folder for the carrier policy. im on havoc rom 11 and there is no engineer mode(*#801, *#800) or log kit since im not factory rom. ive tried disable driver signature verify under advanced restart on the pc....no luck same error. ive tried disable secure boot in bios on pc....same error.
ive tried these steps......
1. adb reboot ftm
2. Install (in your smartphone) USB Gadget Tool (https://f-droid.org/es/packages/net.tjado.usbgadget/) and check this modes: ( cser.dun.O , diag.diag, diag.diag.mdm , ffs.adb , gsi.dpl , gsi.rmnet , qdss.qdss , qdss.qdss.mdm )
3. adb shell su setprop sys.usb.config diag,diag_mdm,adb
4. Disconnect and connect your phone usb cable.
5. Go to Control Panel – Device Manager. You will see some unknown device. You should look at the so-called "Oneplus 8T", ignore the others.
Right click on the first "Oneplus 8T" –> Update Driver –> Browse my computer drivers -> Let me pick form a list of available drivers -> Click on I Have Disk -> Show all devices, browse then go to the Qualcomm Drivers that you download earlier. Then do the same to the other "Oneplus 8T". Choose 9018 for both unknown "Oneplus 8T"..
6. Add both ports in QPST Configuration. Only one of them is the one you are going to use. By clicking on EFS Explorer you will know which one it is by seeing X55 Driver in the description.
7. Change carrier_policy and carrier_policy.xml_Subscription01 files
8. adb reboot
stuck on step 5
Click to expand...
Click to collapse
What did you do specifically to get this working? I'm having trouble on Step 5 as well and I can't detect a device.
Xryphon said:
What did you do specifically to get this working? I'm having trouble on Step 5 as well and I can't detect a device.
Click to expand...
Click to collapse
Have you tried disabling Driver Signing Enforcement when booting into Windows and then installing the driver?
Xryphon said:
What did you do specifically to get this working? I'm having trouble on Step 5 as well and I can't detect a device.
Click to expand...
Click to collapse
#3 command should start like this:
adb shell
su
setprop....
Also disable Driver Signing Enforcement, as you'll have to install driver every time you want to use QPST, with it enabled.