Database Users

Phone wont boot any clockwork build help

Dont know if this is the correct forum to post but here it goes,
phone has MAGLDR 1.11
clockwork 1.1
originally flashed jdms 1.6 nand and was working perfectly
i tried to add the files from the updated clockwork 1.2 booted up clockwork as it normaly would, backed up my current system through through clockwork, i downloaded and put the updated version of jdms 1.7 beta and it would just bootloop, read that i needed a partition and i did it through clockwork, still bootlooped but it woped my sd card's contents with the partition, tried reformatting sd card added a new rom to start from scratch and it just satys at the htc logo or the android on rollerskates logo, tried putting the recovery image had back and it said it couldnt recognize md5 sum so it wouldnt do it. ive tried three bulds and all of them get stuck at the htc or cyanogen screen, i am doing all this from ubuntu, do i need to just start over and reflash through DAF? i dont have access to a windows machine so it will be a while, anybody have any suggestions? im phoneless at the moment, thanks in advance

Wipe cache after restore.
When bootloop, restart phone, start Clockwork mode - wipe cache.
Then restart phone.
Sent from my HD2 running Gingerbread

Tried that, didn't work still stuck on HTC quietly brilliant screen just flashed raidroid HD build

anyone has any advice?

Same Issue
I have the same issue of a bootloop... this seems to be the only place i could find with someone who is having a similar issue as i am.
Steps ive done:
Used Task29 w/radio 2.08.50.05 first.
Ive installed HSPL3
Ive also installed MAGLDR 1.13
Ive partitioned the SD to 13 gb FAT32 and 1 GB Ext3 --- both in primary
Ive flashed recovery 400
installed recovery files onto sd directly
I added the zipped CMYLXGOroms.stock.desire.HD.v1.1.5n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.7OC_CWM file directly to the SD card root.
then I install the CMYLXGOrom and it installs correctly, and then it boots up, and i see the android welcome screen for a second, and it starts its bootloop.
I've tried this with several differnt roms that are for the 1024 LEO but I get the same result each time.
Any help would be much appriciated!

[Q] White screen at boot up

So ive looked around but can't find any threads that help me with this (please point me to some if there are!)
So i tried to flash my HD2 with this version of Android:
http://forum.xda-developers.com/showthread.php?t=733649
I followed all the instructions to the letter (well, at least i think i did), and then after installing it in MAGLDR it says that it was successful. However, when i try to start it up, it boots to the white screen with the green HTC logo, and just stays there.
Any suggestions?
Cheers

Have you flashed HSPL, and CWM with the appropriate partition size for this ROM? Since it's a Desire HD ROM, I'd imagine it takes a 400mb system partition.
Also have you flashed a compatible radio (XX.X.50.XX)?
How long did you wait for it to boot up?
Some of these ROMs can take up to 20 mins or more on their first boot.

How long have you left it to boot up? 15 mins is the max time.
If after 15 mins and it still doesnt boot, try reflash the cwm partition (the clockwork recovery image/CWM) he has in his thread, and then from the CWM, flash the rom again.

huggs said:
Have you flashed HSPL, and CWM with the appropriate partition size for this ROM? Since it's a Desire HD ROM, I'd imagine it takes a 400mb system partition.
Also have you flashed a compatible radio (XX.X.50.XX)?
How long did you wait for it to boot up?
Some of these ROMs can take up to 20 mins or more on their first boot.
Click to expand...
Click to collapse
I have put on HSPL and the 400mb CWM partition
It has Radio version 2.15.50.14
Ive given it well over 30 minutes to work and it still stays on the same screen.

What method did you use to transfer the ROM .zip to your sd card?
Using MAGLDR's USB Mass Storage function sometimes corrupts files.
If you used this, then try either using an sd card reader, another device with USB mass storage functionality, or use CWM to transfer the files from your pc to your sd card.
Other than that, I dunno. Sounds like everything else is right

Clean Install
Do you use Task29?
Clean Install:
1. Use Task29 (1 or 2 times)
2. Download everything you need again (could be you have a bad download)
3. Flash a Radio Rom of your choice
4. Flash MAGLDR 1.13 or cLK bootloader (cLK is more native)
5. Flash clockworkmod recovery via MAGLDR USB Flasher
6. (partitionate your SD card if needed)
7. Transfer your ROM-Zip via clockworkmod in Mounts and Storeage(mount USB-Storeage)
8. Flash a Rom of your choice
That´s it. Hope you next try is a success.

[Q] sense 3.5 roms stuck at boot screen

hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks

Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.

thanks mate i will give that a try

i just extract the 2 roms i have been trying to get to work they seems ok

have you got the correct partition size for the rom ?

Which Sense ROM are you using, anyways?

Try a ext 3 partition on your sdcard then run clean install

thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again

cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221

can that be flashed on the hd2

cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.

i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext

same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(

Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....

thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again

@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!

Cant boot sd magldr ROMs

I can't boot any sense magldr rom from sd. I choose "run ad sd rom", it loads kernel and other things but after 10 min at splash screen, start loading my nand rom (icecreamtosti 0.11). I've tried other microsd, format microsd, wipe27 reinstall magldr, change rel_path in startup.txt. But if I install on sd android 4.0 rom (witch using portadroid ultimate) it boots correctly.
I'm very sorry for my English.
Hope I described my problem clearly.
Sent from my HTC HD2 using XDA

[Q] CM9 & CM10 Boot Failures

Hey guys, really struggling trying to get this working and I'm not sure why. I've been flashing roms to my HTC HD2 (1024 LEO - TMo USA) for a few years now without any issues. For some reason I can not get either of these CM builds to boot properly at all.
- [ROM][720p] NexusHD2-ICS-4.0.4-CM9-HWA V2.8 [NativeSD]
Boots to the grey-ish android text splash logo and cycles through the animation for 1h+. No signs of continued activity.
- [ROM][720p] NexusHD2-JellyBean-4.1.2-CM10 V1.3a [NativeSD]
Boots to green HTC splash text for 10 seconds then phone completely turns off and reboots repeatedly. Left going for 30 min, no change.​
Both installers use the AROMA installer platform. Maybe I'm missing something here? It's been a while since I've tried anything new like the AROMA stuff. I just can't seem to get these to function properly. If there's anything at all I can try to do I would really appreciate the assistance.
I'd like to give 4ext a try, but I'm not sure how I can do that with replacing Clockwork in the process.
Here's my specs:
Environment:
-HTC HD2 (1024 LEO - TMo USA)
-16Gb SD HC Card [512MB Paritioned EXT4 / 32MB SWAP] (Attempted with standard 2Gb SD as well with same setup, same results.)
-HSPL 2.08
-MAGLDR 1.13
-CWM Recovery 5.0.2.7
Things to Note:
-Wipe data/factory reset, Wipe cache partition, Wipe Dalvik Cache, Fix Permissions all run before installations.
-Installations for both ROMS attempted with all 3 installation types (NAND, NAND with DataOnEXT, NativeSD). Exact same resulting errors as listed above, regardless of installation method chosen.
-ROM's zips installed via CWM Recovery's 'Install from SD Card' utility.
-SD Card formated after failed install attempts.
-MD5 verified. No visible file corruptions.
Click to expand...
Click to collapse

This seems quite odd, I assume you've tested other ROMs which boot perfectly? It's possible that your SD simply isn't compatible with MAGLDR (mine isn't) so NativeSD doesn't work. As for NAND/Data on EXT do you correctly repartition in CWM as per the OP of the ROM threads before flashing?

Nigeldg said:
This seems quite odd, I assume you've tested other ROMs which boot perfectly? It's possible that your SD simply isn't compatible with MAGLDR (mine isn't) so NativeSD doesn't work. As for NAND/Data on EXT do you correctly repartition in CWM as per the OP of the ROM threads before flashing?
Click to expand...
Click to collapse
All other ROMs I installed worked fine. SD card has worked fine as well for other builds. After some research I found that doing an SD format/partition via CWM Recovery defaults to EXT3 with no options for EXT4 apparently.
I was able to fix the issue late last night however. I flashed 4ext recovery via CWM and used that to convert the SD card's EXT3 system partition into EXT4. Ran the CM10 install and everything came up perfectly. I still think that's strange though considering I chose a pure NAND install.

warpedcell said:
All other ROMs I installed worked fine. SD card has worked fine as well for other builds. After some research I found that doing an SD format/partition via CWM Recovery defaults to EXT3 with no options for EXT4 apparently.
I was able to fix the issue late last night however. I flashed 4ext recovery via CWM and used that to convert the SD card's EXT3 system partition into EXT4. Ran the CM10 install and everything came up perfectly. I still think that's strange though considering I chose a pure NAND install.
Click to expand...
Click to collapse
Oh darn it! I came a little too late to help you. When I first opened this thread, I told myself "damn, too much letters and words! will look at it later." when the issue is actually easily fixed. Sorry!
I was on NAND (cLK), but then I wanted to try nativesd. so I flashed about 3 nativesd roms, but non of them worked. I switched from cwm to 4EXT recovery and voilà, everything worked!
I had almost exactly the same set up, except the recovery. It is indeed weird why cwm doesn't work whereas 4ext does.

Marvlesz said:
Oh darn it! I came a little too late to help you. When I first opened this thread, I told myself "damn, too much letters and words! will look at it later." when the issue is actually easily fixed. Sorry!
I was on NAND (cLK), but then I wanted to try nativesd. so I flashed about 3 nativesd roms, but non of them worked. I switched from cwm to 4EXT recovery and voilà, everything worked!
I had almost exactly the same set up, except the recovery. It is indeed weird why cwm doesn't work whereas 4ext does.
Click to expand...
Click to collapse
No problem, I appreciate at least knowing I wasn't the only one to have issues with it! Maybe you can still help me out though.
The only way I am able to boot into 4EXT recovery is by installing a special zip file with CWM each boot; it would load a 1-time instance of 4EXT recovery. Is there some way to flat-out replace CWM with 4EXT? Until CWM has EXT4 formatting capabilities, I'm not seeing the advantage of it with these new ROMs being so dependent on it. Or maybe it's because of the AROMA installers, which I definitely see as being the new preferred standard for ROM installation packages.

NexusHD2-JellyBean-CM10_V1.3a and VJ CM10.1 | Jelly Bean 4.2.1
hi guys
help me ...
Sorry for my post here
i cant post in [DEV/ROM/4.2.1] [Jan 26 2013] VJ CM10.1 | Jelly Bean 4.2.1 - v4.6 for HD2's topic
wifi fixed for this rom ?
and on NexusHD2-JellyBean-CM10_V1.3a disabled lock screen animation!
can enable animation lock screen ?