Database Users

my phone turn off automatical when i want make call

my dhd turn off automatical..last week i change my radio to 12.68.60.29U_26.16.04.09 ..after 2 days i install ril for this radio..after i did it,, when i wanted call or If someone wants to call me...phone was be turn off..and then when i turn on phone my phone turn off again..after that when i turn on for second time my phone stay on and work until next calling process... today i change my radio ..ril and my rom..but my problem still There..and nothing change..this is for ril and radio or it is for other thing ?(battery,mb,sim card??????)
thanks in advanced

i have similar problem when battery is under cca. 60%
when someone calls me, my phone rings one time goes off.
sometimes while taking picture it just reboots.
i think the battery is pretty much dead and it needs to be replaced with new one...

gtramt1 said:
i have similar problem when battery is under cca. 60%
when someone calls me, my phone rings one time goes off.
sometimes while taking picture it just reboots.
i think the battery is pretty much dead and it needs to be replaced with new one...
Click to expand...
Click to collapse
thanks man.. Ok .. maybe there is a way that we can solve this problem with software solution...or may be there is another reason..any way Someone else's opinion? or we must Buy a new battery??

i have this problem since i rooted my phone. i tried ARHD 7.04both version, now i am using VirtuousInfinity alpha2 as daily driver and still have that problem...maybe some day i will try to revert to stock and see if problem still persists

Sounds like an issue with the Radio and RIL files not being the same versions. Have you checked the Radio and RIL thread to make sure that they are both the same vesion.

where can i check radio and ril version?

Could you give us a little bit more detail?
Which Rom are you using?
Are you rooted?
Which ROM did you flash back the second time?
Don't worry, I sure it is a Radio/RIL problem.
The worst case scenario is that you flash the Stock Rom and Radio which will return you to what you had original when you bought the phone.

xbiggyl said:
Could you give us a little bit more detail?
Which Rom are you using?
Are you rooted?
Which ROM did you flash back the second time?
Don't worry, I sure it is a Radio/RIL problem.
The worst case scenario is that you flash the Stock Rom and Radio which will return you to what you had original when you bought the phone.
Click to expand...
Click to collapse
i am using virtuous infinity alpha2

RIL is only for gingerbread roms
Enviado desde mi Desire HD usando Tapatalk 2

Flash this radio

xbiggyl said:
Flash this radio
Click to expand...
Click to collapse
i successfully flashed it...will report later today

i think it is the same or maybe even worse...huge battery drain is all i can say...

If I were you I would go back to stock Rom and Radio.
Download the RUU that corresponds to your region and flash it from windows.
http://forum.xda-developers.com/showthread.php?t=1335027
Let me know how it goes.
PS: if you want to back up your apps try Titanium Backup (they have a free version):
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en

xbiggyl said:
If I were you I would go back to stock Rom and Radio.
Download the RUU that corresponds to your region and flash it from windows.
http://forum.xda-developers.com/showthread.php?t=1335027
Let me know how it goes.
PS: if you want to back up your apps try Titanium Backup (they have a free version):
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en
Click to expand...
Click to collapse
for slovenia i would need WWE, but which one is the latest?
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed.exe or
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
R means rooted?

gtramt1 said:
for slovenia i would need WWE, but which one is the latest?
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed.exe or
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
R means rooted?
Click to expand...
Click to collapse
I have tested RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe (without R)
and have been recommending it for many.
I'm not sure if R is rooted. However, either way I suggest you download that one and if you wanted root, do it yourself using AAHK.

it took some time to backup all things...now i am applying "update" from 1.84 to 3.12
will report later if the problem still exists
---------- Post added at 12:46 PM ---------- Previous post was at 12:34 PM ----------
i had some problems...firstly usb 170 error-> rebooted in bootloader after some time(and already installing) i get error usb 171 error, phone stuck at black htc logo. i pulled the battery off and restarted. now in ruu i got differnt image version. before it was 1.84 now it is written Virtous...
should i use ruu one more time?
maybe i had only some problems with bootloader?
now i have newer hboot version 2.00.027, before i had 0.85...will test it...
---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------
in bootloader now i dont see recovery options, but still i can reboot into recovery from virtuousrom
what should i do?????

when this happened to me my rom was Blackout ICS Incredible v3.0.0 ..( i said before what was my radio and ril) after that issue..i flash miuiv4..then miui v2 and stock rom....but still have that problem

who eadednn
my dhd dont recognize memory card....
help meeeee

sfmking said:
my dhd dont recognize memory card....
help meeeee
Click to expand...
Click to collapse
wrong thread...
---------- Post added at 03:10 PM ---------- Previous post was at 02:43 PM ----------
gtramt1 said:
it took some time to backup all things...now i am applying "update" from 1.84 to 3.12
will report later if the problem still exists
---------- Post added at 12:46 PM ---------- Previous post was at 12:34 PM ----------
i had some problems...firstly usb 170 error-> rebooted in bootloader after some time(and already installing) i get error usb 171 error, phone stuck at black htc logo. i pulled the battery off and restarted. now in ruu i got differnt image version. before it was 1.84 now it is written Virtous...
should i use ruu one more time?
maybe i had only some problems with bootloader?
now i have newer hboot version 2.00.027, before i had 0.85...will test it...
---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------
in bootloader now i dont see recovery options, but still i can reboot into recovery from virtuousrom
what should i do?????
Click to expand...
Click to collapse
i am one silly person :silly: my phone always rebooted in fastboot not in bootloader...and in fastboot you obviously dont have recovery option...
i've got battery level less than 60% and i tried to call my phone few times...and it looks like the problem is gone...is it possible that HBOOT was the main problem?

I think you should check out the battery, try both the charging plug and call someone. If not restart again, make sure the battery is broken.
Sent from my HTC Desire HD using xda premium

My First Droid Razr M Experience

I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?

SaturnsVoid said:
I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
Click to expand...
Click to collapse
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature

aviwdoowks said:
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
Click to expand...
Click to collapse
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread

SaturnsVoid said:
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
Click to expand...
Click to collapse
Are you unlocked? (Bootloader?)

the auzess
aviwdoowks said:
Are you unlocked? (Bootloader?)
Click to expand...
Click to collapse
Yes, Its Unlocked. I need to get it fixed.

SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.

aviwdoowks said:
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
Click to expand...
Click to collapse
Well i have the phone in Fastboot, I don't know where to get the full version XML file

SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
SaturnsVoid said:
Well i have the phone in Fastboot, I don't know where to get the full version XML file
Click to expand...
Click to collapse
You must read my OP!
The link is the last thing there.

aviwdoowks said:
You must read my OP!
The link is the last thing there.
Click to expand...
Click to collapse
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?

SaturnsVoid said:
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
Click to expand...
Click to collapse
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.

aviwdoowks said:
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
Click to expand...
Click to collapse
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?

SaturnsVoid said:
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
Click to expand...
Click to collapse
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.

aviwdoowks said:
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
Click to expand...
Click to collapse
Well i did that all, Still does not work... I don't understand!?

SaturnsVoid said:
Well i did that all, Still does not work... I don't understand!?
Click to expand...
Click to collapse
You did the rzr forum method? Get help there, I do not support locked phones.
---------- Post added at 09:08 PM ---------- Previous post was at 08:32 PM ----------
Basically can you just do a rsd restore then use the new motochopper? Can someone chime in to confirm?
For a locked phone?

I just realized you never went to my restore thread. That explains your confusion. It's link is in the middle of my goodies page. I put it in my signature now.
http://forum.xda-developers.com/showthread.php?t=2391641

Ok, SaturnsVoid... so, first, sorry to hear about the problem. Motorola/VZ is giving you BS... rooting won't break your WiFi unless you did something or installed something that would...
What's your current system version?
Have you taken any OTAs since you had it? If not, you may still be able to unlock.
Also, may want to try using WiFi Connection Fixer on the Play Store (requires root...)
If those don't work, try PMing me... I can help you work it out...

Please help! Stuck in fastboot!

Hey guys so i fallowed the root method "Motofail" from a thread that said it unlocked the bootloader... well it didnt so when i used safestrap to flash cm11 it rebooted into fastboot and i have no unlocked bootloader... is it possible to get out of this? even if reverting to stock? please Get back to me fast if you can since this is not my phone and would like to fix it rather quickly P.S i found a new method for unlocking my bootloader called "Motocolapse" so if my phone is operationable i can do it now... its just a matter of i tried flashing cm11 and when i did a system reboot it only goes to fastboot please respond any way to fix! THANKS IN ADVANCE ALOT!!! much love

iPwnAndroid said:
Hey guys so i fallowed the root method "Motofail" from a thread that said it unlocked the bootloader... well it didnt so when i used safestrap to flash cm11 it rebooted into fastboot and i have no unlocked bootloader... is it possible to get out of this? even if reverting to stock? please Get back to me fast if you can since this is not my phone and would like to fix it rather quickly P.S i found a new method for unlocking my bootloader called "Motocolapse" so if my phone is operationable i can do it now... its just a matter of i tried flashing cm11 and when i did a system reboot it only goes to fastboot please respond any way to fix! THANKS IN ADVANCE ALOT!!! much love
Click to expand...
Click to collapse
what did it say for your sw build or any numbers in the about phone screen?
The last link below I wrote just for YOU.

aviwdoowks said:
what did it say for your sw build or any numbers in the about phone screen?
The last link below I wrote just for YOU.
Click to expand...
Click to collapse
i cant really tell since my phone is stuck in fastboot :/

You could Go to that link & try matts util to do a full restore.
But wait.
You were on SS cause your boot is locked?
How old is the phone?
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
Post what you see in the screen.

aviwdoowks said:
You could Go to that link & try matts util to do a full restore.
But wait.
You were on SS cause your boot is locked?
How old is the phone?
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
Post what you see in the screen.
Click to expand...
Click to collapse
AP Fastboot Flash Mode (S)
10.9B(*) (sha-le9f557, 2013-05-24 14:49:34)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Failed to hab check for recovery: 0x56
Fastboot Reason: Boot Failure

iPwnAndroid said:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-le9f557, 2013-05-24 14:49:34)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Failed to hab check for recovery: 0x56
Fastboot Reason: Boot Failure
Click to expand...
Click to collapse
Hab check!!!
Pm cellzealot!
http://forum.xda-developers.com/member.php?u=767282

aviwdoowks said:
Hab check!!!
Pm cellzealot!
http://forum.xda-developers.com/showthread.php?t=2566065
Click to expand...
Click to collapse
Well its changed now since i tried Droid razr m utility 1.20 now it says
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
usb connected

iPwnAndroid said:
Hey guys so i fallowed the root method "Motofail" from a thread that said it unlocked the bootloader... well it didnt so when i used safestrap to flash cm11 it rebooted into fastboot and i have no unlocked bootloader... is it possible to get out of this? even if reverting to stock? please Get back to me fast if you can since this is not my phone and would like to fix it rather quickly P.S i found a new method for unlocking my bootloader called "Motocolapse" so if my phone is operationable i can do it now... its just a matter of i tried flashing cm11 and when i did a system reboot it only goes to fastboot please respond any way to fix! THANKS IN ADVANCE ALOT!!! much love
Click to expand...
Click to collapse
Well, it looks like Android is pawning you.
Motofail was the root exploit for the 4.1.1 version and it didn't unlock the bootloader. Motopocalypse was the only method to unlock the BL and, according the date you posted from your fastboot screen, you're on the May OTA that blocks the BL unlock. You really need to stop using random tools and start reading before you do something. Also, you can't flash CM11 with SS. Utility 1.20 is the correct utility to use for your system version. Are you sure you're using the 1.20 Utility? That's the only reason I can see that you're getting the fail. Did you try to flash the newer OTA at any point?

RikRong said:
Well, it looks like Android is pawning you.
Motofail was the root exploit for the 4.1.1 version and it didn't unlock the bootloader. Motopocalypse was the only method to unlock the BL and, according the date you posted from your fastboot screen, you're on the May OTA that blocks the BL unlock. You really need to stop using random tools and start reading before you do something. Also, you can't flash CM11 with SS. Utility 1.20 is the correct utility to use for your system version. Are you sure you're using the 1.20 Utility? That's the only reason I can see that you're getting the fail. Did you try to flash the newer OTA at any point?
Click to expand...
Click to collapse
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M

iPwnAndroid said:
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
Click to expand...
Click to collapse
Don't take it personally, it's just a little bit of sarcasm. I know it can get lost through the internet.
With that being said. I reread thread and saw that date again. Utility 1.20 was for the OTA prior to that, so that's why you're probably running into issues. Sorry, you can slap me because I told you wrong in the post after yours where you talked about using 1.20. Matt never updated a utility to reflect the newest OTA. As for CM11, it specifically states on the CM website that you need an unlocked bootloader:
http://wiki.cyanogenmod.org/w/Xt907_Info
CM was designed for SS on the Razr because the Razr never had an unlockable BL:
http://wiki.cyanogenmod.org/w/Spyder_Info

iPwnAndroid said:
Well its changed now since i tried Droid razr m utility 1.20 now it says
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
usb connected
Click to expand...
Click to collapse
I think messed up something bad!
Pm cellzealot!
I had his link wrong. This is correct.
http://forum.xda-developers.com/member.php?u=767282
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
Just pm him with the link to your thread. & use the crying smily.

aviwdoowks said:
I think messed up something bad!
Pm cellzealot!
I had his link wrong. This is correct.
http://forum.xda-developers.com/member.php?u=767282
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
Just pm him with the link to your thread. & use the crying smily.
Click to expand...
Click to collapse
Problem was using utility 1.20. It was designed for the OTA in April. His FB screen says he took the OTA in May. Do you have the FXZ for .78 or .1 somewhere? I'm not on my home computer, otherwise I would look. I think he needs to RSD to save this.

iPwnAndroid said:
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
Click to expand...
Click to collapse
RikRong said:
Problem was using utility 1.20. It was designed for the OTA in April. His FB screen says he took the OTA in May. Do you have the FXZ for .78 or .1 somewhere? I'm not on my home computer, otherwise I would look. I think he needs to RSD to save this.
Click to expand...
Click to collapse
The ...78 is let me see mega is slow....
---------- Post added at 10:18 PM ---------- Previous post was at 09:55 PM ----------
iPwnAndroid said:
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48295502&postcount=47
Join this user in his drama! Right up your alley! Same Same.
---------- Post added at 10:23 PM ---------- Previous post was at 10:18 PM ----------
That is if your phone is not hosed.
---------- Post added at 10:26 PM ---------- Previous post was at 10:23 PM ----------
Un modded Xml will be up soon here on your thread.
My restore link: http://forum.xda-developers.com/showthread.php?t=2391641
Read for now while Mega up loads.
---------- Post added at 10:49 PM ---------- Previous post was at 10:26 PM ----------
On the way....

iPwnAndroid said:
.^.
Click to expand...
Click to collapse
VRZ_XT907_9.8.1Q-78-1_1FF.orig.xml.zip
Posted it in the General forum. Good Luck!

aviwdoowks said:
VRZ_XT907_9.8.1Q-78-1_1FF.orig.xml.zip
Posted it in the General forum. Good Luck!
Click to expand...
Click to collapse
Hey man i see you bricked your phone no worries i'll help you out i've done it myself.
so you're going to need
motorola drivers
RSD lite lastest version
4.1.2 xml file for razr m ( just google search it)
and patience
ok so
I guess you know how to put your razr m in fastboot mood if not you power your device off and hold the power , vol - and sorta click it multple times. until it brings you to the screen. then you should be able to run rsd lite and flash the 4.1.2 xml file would could be found with a single google search. so flashing firmware is pretty easy.. it should be a breeze. after that just leave your phone as it is. motorola will be releasing the 4.4 update swoon hopefully so i would just wait.
hope this was semi helpful

iPwnAndroid said:
Well its changed now since i tried Droid razr m utility 1.20 now it says
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
usb connected
Click to expand...
Click to collapse
Someone quoted me but for you.

Relock Bootloader & İmei number Change - Show Time

Risk!
I'am not responsible
I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF PROGRESS
Before video Backup qcn(QPST-START CLİENT-SOFTWARE DOWNLOAD-BACKUP AND START) after 05:01
-Root
-LP kdz flash
-Old phone İmei
Thank you for watching.
Programs
MOD EDIT: Removed
(try and feedback)
so easy
I shared Because my birthday..
Have a Nice Day.

lol.....

OMGGGGGGG.it's work work work.Thank you Sir.

ToreqLex said:
OMGGGGGGG.it's work work work.Thank you Sir.
Click to expand...
Click to collapse
thank you for feedback

very interesting

Is this work with G5?

Can you explain it more detailed?
I've got an unlocked G4 with TWRP running. How to reset the phone to default? Are these steps OK?
- Add my original IMEI to your orjinalg4.qcn
- Execute commands from commands.txt
- Run QPST and flash orjinalg4.qcn
What about TWRP afterwards? Is it gone?

ChuChu1234 said:
Can you explain it more detailed?
I've got an unlocked G4 with TWRP running. How to reset the phone to default? Are these steps OK?
- Add my original IMEI to your orjinalg4.qcn
- Execute commands from commands.txt
- Run QPST and flash orjinalg4.qcn
What about TWRP afterwards? Is it gone?
Click to expand...
Click to collapse
If this really works, then it will be gone I guess.

RogerF81 said:
If this really works, then it will be gone I guess.
Click to expand...
Click to collapse
Nowhere in his instructions did I see him flash a stock recovery image.
I presume this will work to Re-Lock the bootloader. But you would want to flash all stock images first rather than be stuck with a Locked device that will not boot your Unsigned Partitions.

But as I think, you can flash stock ROM with KDZ&TOT after this re-lock.

Well...could this IMEI change (assuming it works) be used to unlock the bootloader? Also I'm pretty sure this is illegal.

Here we go again. Check this guy's post history to see I'm talking about.

jal3223 said:
Here we go again. Check this guy's post history to see I'm talking about.
Click to expand...
Click to collapse
It's time...Please u do not

It seems it works just going by one person's comment. The relocking part at least.

@LaughingCarrot: ToreqLex = warloxfre or a friend from him. Just look at his posts . Time to close this thread - again.

this relocking does not work for others?
http://forum.xda-developers.com/tmobile-g4/help/relock-bootloader-h811-t3372970

MickyFoley said:
@LaughingCarrot: ToreqLex = warloxfre or a friend from him. Just look at his posts . Time to close this thread - again.
Click to expand...
Click to collapse
try and feedback please
1:11 - 1:30 unlocked bootloader. see top left (Phone)
7:40 - 8:16 ...... see top left (Phone)
my friend Toreqlex because i did h818p unlock bootloader her.

MickyFoley said:
@LaughingCarrot: ToreqLex = warloxfre or a friend from him. Just look at his posts . Time to close this thread - again.
Click to expand...
Click to collapse
What you guys in real want ? Here is something real going on, depending on YOUR (XDA Comminity) feedback, full unlock guide for G4 and probably for G5 will come soon. Isn't this what thousends of users want ? "warloxfre" is a member of androidbrick.com and starting from the beginning all his works are for real. I think you should lock your brain with this attitude !
---------- Post added at 09:37 PM ---------- Previous post was at 09:34 PM ----------
LaughingCarrot said:
Well...could this IMEI change (assuming it works) be used to unlock the bootloader? Also I'm pretty sure this is illegal.
Click to expand...
Click to collapse
If people here will "deserve", unlock guide will be published soon too, we are trying to get hands on a G5 and work on it too, to come up with 2 models, so some smartass won't claim this method on G5 after.
---------- Post added at 09:45 PM ---------- Previous post was at 09:37 PM ----------
BrunoSlivar said:
Is this work with G5?
Click to expand...
Click to collapse
Will work if people behave and support..
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
ChuChu1234 said:
Can you explain it more detailed?
I've got an unlocked G4 with TWRP running. How to reset the phone to default? Are these steps OK?
- Add my original IMEI to your orjinalg4.qcn
- Execute commands from commands.txt
- Run QPST and flash orjinalg4.qcn
What about TWRP afterwards? Is it gone?
Click to expand...
Click to collapse
This prodecure does have nothing to do with recovery (twrp), so NO, it will stay. This is just a trick (imei change). Ok, changing imei is illegal we ALL know that, but original imei will be written back after.

Any test subject?

Playing with imei is not dangerous at all if you know what you are doing. People who are not brave enough, just fallow this guide to backup your QCN first, then you are ready to test this..
http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/

unlocked S8 [G950U] after Android update can't connect to 4G or 3G network

Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help

idrissbravo said:
Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
Click to expand...
Click to collapse
can you screenshot your "about phone" screen and post it here? Please be sure to block out your sensitive info like phone number, IMEI, ESN etc etc

youdoofus said:
can you screenshot your "about phone" screen and post it here? Please be sure to block out your sensitive info like phone number, IMEI, ESN etc etc
Click to expand...
Click to collapse
i don't know from where i post photos here
And links

idrissbravo said:
i don't know from where i post photos here
And links
Click to expand...
Click to collapse
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
idrissbravo said:
Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
Click to expand...
Click to collapse
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin

TheMadScientist said:
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
Click to expand...
Click to collapse
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks

TheMadScientist said:
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
Click to expand...
Click to collapse
you dont know how to flash other countries CSC's?
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
idrissbravo said:
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
Click to expand...
Click to collapse
im running the U1 version of the firmware for my phone and its been perfect. The U1 is the unbranded version, so no dumb boot animation anymore etc etc

youdoofus said:
you dont know how to flash other countries CSC's?
Click to expand...
Click to collapse
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
I have no boot animation but there is sprint OMADM notification now

youdoofus said:
you dont know how to flash other countries CSC's?
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
im running the U1 version of the firmware for my phone and its been perfect. The U1 is the unbranded version, so no dumb boot animation anymore etc etc
Click to expand...
Click to collapse
Yea since I'm in us I don't habe to mess with changing csc never had to. That's what it sounds like if he updated. It replaced the csc to. And don't know what to do with his sim. Unless his apn is gone and needs 're input
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
idrissbravo said:
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
Click to expand...
Click to collapse
I've seen guys flash other country csc files. I just don't know the method as I believe Odin will fail.

TheMadScientist said:
Yea since I'm in us I don't habe to mess with changing csc never had to. That's what it sounds like if he updated. It replaced the csc to. And don't know what to do with his sim. Unless his apn is gone and needs 're input
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
I've seen guys flash other country csc files. I just don't know the method as I believe Odin will fail.
Click to expand...
Click to collapse
since you would be technically changing carrier information with the Odin flash, yes, it should fail in stock Odin. But it will work in modded Odin.
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
idrissbravo said:
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
I have no boot animation but there is sprint OMADM notification now
Click to expand...
Click to collapse
factory reset the phone.

idrissbravo said:
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
Click to expand...
Click to collapse
youdoofus said:
since you would be technically changing carrier information with the Odin flash, yes, it should fail in stock Odin. But it will work in modded Odin.
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
factory reset the phone.
Click to expand...
Click to collapse
i downloaded the U1 6 firmware csc:xaa . I used the modded odin (odin 3b) i ve made a factory reset i tried to reflash csc the modded odin fails
Still bootloop

idrissbravo said:
i downloaded the U1 6 firmware csc:xaa . I used the modded odin (odin 3b) i ve made a factory reset i tried to reflash csc the modded odin fails
Still bootloop
Click to expand...
Click to collapse
try another cable, reboot your machine, get a new fresh download (dont go directly to sammobile.cim to get it, get the Frija tool or Samfirm, they take literally 1/5th the time to download the firmware sets), try a different computer, uninstall the drivers and let windows reinstall them when you connect your phone, is ADB installed system wide? if not, there is a small tool to do it for you

youdoofus said:
try another cable, reboot your machine, get a new fresh download (dont go directly to sammobile.cim to get it, get the Frija tool or Samfirm, they take literally 1/5th the time to download the firmware sets), try a different computer, uninstall the drivers and let windows reinstall them when you connect your phone, is ADB installed system wide? if not, there is a small tool to do it for you
Click to expand...
Click to collapse
NO THING of those done . i think erase NAND and re-input SN (that i didn't found) , IMEI and information (prod name, device type...) the repairer made a catastrophe. i installed phone info i can't imagin what i found all information are false.
can i set to zero and re-inter the information ?

idrissbravo said:
NO THING of those done . i think erase NAND and re-input SN (that i didn't found) , IMEI and information (prod name, device type...) the repairer made a catastrophe. i installed phone info i can't imagin what i found all information are false.
can i set to zero and re-inter the information ?
Click to expand...
Click to collapse
IMEI changing and that kind of stuff is sketchy. Can they reflash it for you?

youdoofus said:
IMEI changing and that kind of stuff is sketchy. Can they reflash it for you?
Click to expand...
Click to collapse
how those "they" we haven't samsung service , we have just some stores that sell phones and they can "repair" them
they says to me that they don't knows about american samsung (something that i love because of snapdragon)
thank you for all your effort to help me

Nand erase does not wipe IMEI.
And rewriting isn't discussed on XDA

idrissbravo said:
how those "they" we haven't samsung service , we have just some stores that sell phones and they can "repair" them
they says to me that they don't knows about american samsung (something that i love because of snapdragon)
thank you for all your effort to help me
Click to expand...
Click to collapse
the "they" is the repair shop you had work on it. its hard to know how to un-do what they did if we dont know what they did
i also cant imagine a repair shop that can work on Exynos S9s competently but not snapdragon ones