my phone turn off automatical when i want make call - Desire HD General

my dhd turn off automatical..last week i change my radio to 12.68.60.29U_26.16.04.09 ..after 2 days i install ril for this radio..after i did it,, when i wanted call or If someone wants to call me...phone was be turn off..and then when i turn on phone my phone turn off again..after that when i turn on for second time my phone stay on and work until next calling process... today i change my radio ..ril and my rom..but my problem still There..and nothing change..this is for ril and radio or it is for other thing ?(battery,mb,sim card??????)
thanks in advanced

i have similar problem when battery is under cca. 60%
when someone calls me, my phone rings one time goes off.
sometimes while taking picture it just reboots.
i think the battery is pretty much dead and it needs to be replaced with new one...

gtramt1 said:
i have similar problem when battery is under cca. 60%
when someone calls me, my phone rings one time goes off.
sometimes while taking picture it just reboots.
i think the battery is pretty much dead and it needs to be replaced with new one...
Click to expand...
Click to collapse
thanks man.. Ok .. maybe there is a way that we can solve this problem with software solution...or may be there is another reason..any way Someone else's opinion? or we must Buy a new battery??

i have this problem since i rooted my phone. i tried ARHD 7.04both version, now i am using VirtuousInfinity alpha2 as daily driver and still have that problem...maybe some day i will try to revert to stock and see if problem still persists

Sounds like an issue with the Radio and RIL files not being the same versions. Have you checked the Radio and RIL thread to make sure that they are both the same vesion.

where can i check radio and ril version?

Could you give us a little bit more detail?
Which Rom are you using?
Are you rooted?
Which ROM did you flash back the second time?
Don't worry, I sure it is a Radio/RIL problem.
The worst case scenario is that you flash the Stock Rom and Radio which will return you to what you had original when you bought the phone.

xbiggyl said:
Could you give us a little bit more detail?
Which Rom are you using?
Are you rooted?
Which ROM did you flash back the second time?
Don't worry, I sure it is a Radio/RIL problem.
The worst case scenario is that you flash the Stock Rom and Radio which will return you to what you had original when you bought the phone.
Click to expand...
Click to collapse
i am using virtuous infinity alpha2

RIL is only for gingerbread roms
Enviado desde mi Desire HD usando Tapatalk 2

Flash this radio

xbiggyl said:
Flash this radio
Click to expand...
Click to collapse
i successfully flashed it...will report later today

i think it is the same or maybe even worse...huge battery drain is all i can say...

If I were you I would go back to stock Rom and Radio.
Download the RUU that corresponds to your region and flash it from windows.
http://forum.xda-developers.com/showthread.php?t=1335027
Let me know how it goes.
PS: if you want to back up your apps try Titanium Backup (they have a free version):
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en

xbiggyl said:
If I were you I would go back to stock Rom and Radio.
Download the RUU that corresponds to your region and flash it from windows.
http://forum.xda-developers.com/showthread.php?t=1335027
Let me know how it goes.
PS: if you want to back up your apps try Titanium Backup (they have a free version):
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en
Click to expand...
Click to collapse
for slovenia i would need WWE, but which one is the latest?
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed.exe or
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
R means rooted?

gtramt1 said:
for slovenia i would need WWE, but which one is the latest?
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed.exe or
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
R means rooted?
Click to expand...
Click to collapse
I have tested RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe (without R)
and have been recommending it for many.
I'm not sure if R is rooted. However, either way I suggest you download that one and if you wanted root, do it yourself using AAHK.

it took some time to backup all things...now i am applying "update" from 1.84 to 3.12
will report later if the problem still exists
---------- Post added at 12:46 PM ---------- Previous post was at 12:34 PM ----------
i had some problems...firstly usb 170 error-> rebooted in bootloader after some time(and already installing) i get error usb 171 error, phone stuck at black htc logo. i pulled the battery off and restarted. now in ruu i got differnt image version. before it was 1.84 now it is written Virtous...
should i use ruu one more time?
maybe i had only some problems with bootloader?
now i have newer hboot version 2.00.027, before i had 0.85...will test it...
---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------
in bootloader now i dont see recovery options, but still i can reboot into recovery from virtuousrom
what should i do?????

when this happened to me my rom was Blackout ICS Incredible v3.0.0 ..( i said before what was my radio and ril) after that issue..i flash miuiv4..then miui v2 and stock rom....but still have that problem

who eadednn
my dhd dont recognize memory card....
help meeeee

sfmking said:
my dhd dont recognize memory card....
help meeeee
Click to expand...
Click to collapse
wrong thread...
---------- Post added at 03:10 PM ---------- Previous post was at 02:43 PM ----------
gtramt1 said:
it took some time to backup all things...now i am applying "update" from 1.84 to 3.12
will report later if the problem still exists
---------- Post added at 12:46 PM ---------- Previous post was at 12:34 PM ----------
i had some problems...firstly usb 170 error-> rebooted in bootloader after some time(and already installing) i get error usb 171 error, phone stuck at black htc logo. i pulled the battery off and restarted. now in ruu i got differnt image version. before it was 1.84 now it is written Virtous...
should i use ruu one more time?
maybe i had only some problems with bootloader?
now i have newer hboot version 2.00.027, before i had 0.85...will test it...
---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------
in bootloader now i dont see recovery options, but still i can reboot into recovery from virtuousrom
what should i do?????
Click to expand...
Click to collapse
i am one silly person :silly: my phone always rebooted in fastboot not in bootloader...and in fastboot you obviously dont have recovery option...
i've got battery level less than 60% and i tried to call my phone few times...and it looks like the problem is gone...is it possible that HBOOT was the main problem?

I think you should check out the battery, try both the charging plug and call someone. If not restart again, make sure the battery is broken.
Sent from my HTC Desire HD using xda premium

Related

[Q] Flashing custom rom

Hey,
I'm newbie to windows phone, so i have a few questions. My SPL version is 4.3.2250. Can i use this (http://forum.xda-developers.com/showthread.php?t=1195647) guide to install HSPL. I want to flash this rom to my phone: http://forum.xda-developers.com/showthread.php?t=2080612. But ther is no guide on how to flash it. Can u tell me how to do it?
SlightlyOffensive said:
Hey,
I'm newbie to windows phone, so i have a few questions. My SPL version is 4.3.2250. Can i use this (http://forum.xda-developers.com/showthread.php?t=1195647) guide to install HSPL. I want to flash this rom to my phone: http://forum.xda-developers.com/showthread.php?t=2080612. But ther is no guide on how to flash it. Can u tell me how to do it?
Click to expand...
Click to collapse
First download RUU_Mondrian_Cingular_US_1.52.502.04_5.66.09.09_22.46.50_RELEASE.exe from FileFactory, unpack and DELETE RUU_signed.nbh. Then run ROMUpdateUtility.exe. It will downgrade your SPL to 1.52. After reboot reset your device and hold “Volume Down” button during reset to enter OSPL mode. You must make sure than your SPL is 1.52, or your phone will be broken. Then you will be able to install HSPL and flash custom ROMs. :good:
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
Remember!!!
Be warned, using RSPL/HSPL may void your warranty.
You use this at your own risk. NOBODY take no responsibility for any conflict, fault, or damage caused by this procedure.
Thank you, i'll try to do this tomorrow!
SlightlyOffensive said:
Thank you, i'll try to do this tomorrow!
Click to expand...
Click to collapse
Are any results?
NiggaWithAttitude said:
Are any results?
Click to expand...
Click to collapse
Yeah, thank you. Installed it succesfully
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
[/COLOR]Remember!!!
Be warned, using RSPL/HSPL may void your warranty.
You use this at your own risk. NOBODY take no responsibility for any conflict, fault, or damage caused by this procedure.[/QUOTE]
Hi, please help. on the guide this is what it says: List of supported MIDs:
Gold: “PC92****”, “PC921000”
Mozart: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”
Mondrian: “PD26****”, “PD261000”, “PD261100”
Spark: “PC401000”
Schubert: “PD29****”, “PD291000”, “PD291100”, "PD291200", "PD291300", "PD291500"
and my mondrian mid is pd26100. not pd261000, does the pd26**** include mine? since that one has one more digit than mine. or is mine not supported?
also, i bought it used. how can i know if it has opl or not? can i flash to 7.8 rom rom mango? stock rom? ps when i go into bootloader mode i get White screen with text about Factory restore, so does that mean it has ospl?
can anyone helo me please?
CarloAguilar said:
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
[/COLOR]Remember!!!
Be warned, using RSPL/HSPL may void your warranty.
You use this at your own risk. NOBODY take no responsibility for any conflict, fault, or damage caused by this procedure.
Click to expand...
Click to collapse
Hi, please help. on the guide this is what it says: List of supported MIDs:
Gold: “PC92****”, “PC921000”
Mozart: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”
Mondrian: “PD26****”, “PD261000”, “PD261100”
Spark: “PC401000”
Schubert: “PD29****”, “PD291000”, “PD291100”, "PD291200", "PD291300", "PD291500"
and my mondrian mid is pd26100. not pd261000, does the pd26**** include mine? since that one has one more digit than mine. or is mine not supported?
also, i bought it used. how can i know if it has opl or not? can i flash to 7.8 rom rom mango? stock rom? ps when i go into bootloader mode i get White screen with text about Factory restore, so does that mean it has ospl?[/QUOTE]
Your MID is PD261000. Don't worry, u can't see the last digit in the bootloader screen. Read that guide one more time
SlightlyOffensive said:
Hi, please help. on the guide this is what it says: List of supported MIDs:
Gold: “PC92****”, “PC921000”
Mozart: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”
Mondrian: “PD26****”, “PD261000”, “PD261100”
Spark: “PC401000”
Schubert: “PD29****”, “PD291000”, “PD291100”, "PD291200", "PD291300", "PD291500"
and my mondrian mid is pd26100. not pd261000, does the pd26**** include mine? since that one has one more digit than mine. or is mine not supported?
also, i bought it used. how can i know if it has opl or not? can i flash to 7.8 rom rom mango? stock rom? ps when i go into bootloader mode i get White screen with text about Factory restore, so does that mean it has ospl?
Click to expand...
Click to collapse
Your MID is PD261000. Don't worry, u can't see the last digit in the bootloader screen. Read that guide one more time[/QUOTE]
yeah but on the back of my phone under the battery cover it says pd26100

My First Droid Razr M Experience

I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
SaturnsVoid said:
I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
Click to expand...
Click to collapse
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
aviwdoowks said:
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
Click to expand...
Click to collapse
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
SaturnsVoid said:
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
Click to expand...
Click to collapse
Are you unlocked? (Bootloader?)
the auzess
aviwdoowks said:
Are you unlocked? (Bootloader?)
Click to expand...
Click to collapse
Yes, Its Unlocked. I need to get it fixed.
SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
aviwdoowks said:
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
Click to expand...
Click to collapse
Well i have the phone in Fastboot, I don't know where to get the full version XML file
SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
SaturnsVoid said:
Well i have the phone in Fastboot, I don't know where to get the full version XML file
Click to expand...
Click to collapse
You must read my OP!
The link is the last thing there.
aviwdoowks said:
You must read my OP!
The link is the last thing there.
Click to expand...
Click to collapse
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
SaturnsVoid said:
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
Click to expand...
Click to collapse
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
aviwdoowks said:
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
Click to expand...
Click to collapse
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
SaturnsVoid said:
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
Click to expand...
Click to collapse
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
aviwdoowks said:
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
Click to expand...
Click to collapse
Well i did that all, Still does not work... I don't understand!?
SaturnsVoid said:
Well i did that all, Still does not work... I don't understand!?
Click to expand...
Click to collapse
You did the rzr forum method? Get help there, I do not support locked phones.
---------- Post added at 09:08 PM ---------- Previous post was at 08:32 PM ----------
Basically can you just do a rsd restore then use the new motochopper? Can someone chime in to confirm?
For a locked phone?
I just realized you never went to my restore thread. That explains your confusion. It's link is in the middle of my goodies page. I put it in my signature now.
http://forum.xda-developers.com/showthread.php?t=2391641
Ok, SaturnsVoid... so, first, sorry to hear about the problem. Motorola/VZ is giving you BS... rooting won't break your WiFi unless you did something or installed something that would...
What's your current system version?
Have you taken any OTAs since you had it? If not, you may still be able to unlock.
Also, may want to try using WiFi Connection Fixer on the Play Store (requires root...)
If those don't work, try PMing me... I can help you work it out...

Camera Brocken after Unlocking Bootloader

Hey Friends,
My camera is not starting just showing error "Camera Unable to start. If this happens again please power off your phone and restart. and in open camera its showing camera is busy.
I tried doing all things such as clear catch, master reset even installed a custom rom still the same issue in stock and custom rom.
Any help would be great.
Getting same thing, but not immediately after unlock, worked fine till today, not sure whats up gonna try some things if i fix it ill let you know.
---------- Post added at 01:43 PM ---------- Previous post was at 01:38 PM ----------
Fixed it by flashing POTTER_NPN25.137-33_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip via RSD Lite, lemme know if you need any of those.
Any one has this issue, i have unlock the boot loader and rooted using super su, from there the camera broken. this is Indian version.
can anyone suggest to solve this please?
The camera is fixed in custom Roms and kernels. I run LOS and Elementalv6 with no issues
Is the issue will solve if i flash this?
https://forum.xda-developers.com/g5-plus/development/stock-debloated-deodexed-t3619972
thanks for the quick reply
Yes clean flash the Debloated Rom from that link and you will have your Camera back as it is not a hardware problem!!
Thanks everyone, really got answers as requested. It works, flashed superSu also, got stock debtoted rooted rom, that's what I want.
But ofcourse it is stock kernel.
cyberg0d said:
Getting same thing, but not immediately after unlock, worked fine till today, not sure whats up gonna try some things if i fix it ill let you know.
---------- Post added at 01:43 PM ---------- Previous post was at 01:38 PM ----------
Fixed it by flashing POTTER_NPN25.137-33_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip via RSD Lite, lemme know if you need any of those.
Click to expand...
Click to collapse
how to use rsd lite which version please provide guide thanks
I too have same problem.. how to recover that problem.. I too have unlocked my phone.
chauhanjayc said:
Hey Friends,
My camera is not starting just showing error "Camera Unable to start. If this happens again please power off your phone and restart. and in open camera its showing camera is busy.
I tried doing all things such as clear catch, master reset even installed a custom rom still the same issue in stock and custom rom.
Any help would be great.[/QUOTE
meswar said:
Any one has this issue, i have unlock the boot loader and rooted using super su, from there the camera broken. this is Indian version.
can anyone suggest to solve this please?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Does flashing the xml via RSD Lite remove root?
Bhavani patil said:
chauhanjayc said:
Hey Friends,
My camera is not starting just showing error "Camera Unable to start. If this happens again please power off your phone and restart. and in open camera its showing camera is busy.
I tried doing all things such as clear catch, master reset even installed a custom rom still the same issue in stock and custom rom.
Any help would be great.[/QUOTE
Click to expand...
Click to collapse
If your device is indian version (XT1686), install stock ROM. I was facing same issue. Installed below stock rom.
https://firmware.center/firmware/Motorola/Moto G5 Plus/Stock/
File Name - POTTER_NPN25.137-92_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Folllow steps given in this video -
https://www.youtube.com/watch?v=-FszZOx2pWU
Click to expand...
Click to collapse

I don't have half of the system apps... Bluetooth and NFC wont turn on too!

Hi guys! I tried root my Huawei P9 Lite VNS-L31 like 4 months ago, and it all goes downhill from there...
I used the proper tools and stuff to root it (seen it on here how to do it properly) and i unlocked the bootloader, but not the second part.
I tried relocking the bootloader again and tried to do the whole process again and it just wouldn't root.
So i stopped trying and like 4 months went past and i still haven't found the solution!
When i try to update the phone it doesn't work and says the partition is damaged!
Soooo idk what to do, I really need help because half of the system apps that we're originally on the phone are gone, even Bluetooth wont turn on as well as NFC and some other stuff :/
(BTW i have very little knowledge when it comes to phones so don't write anything to complicated, if it is complicated i'll try to do it then )
Hopefully I will solve it with you guys
What's ur Rom now ?
KrakenPlays said:
Hi guys! I tried root my Huawei P9 Lite VNS-L31 like 4 months ago, and it all goes downhill from there...
I used the proper tools and stuff to root it (seen it on here how to do it properly) and i unlocked the bootloader, but not the second part.
I tried relocking the bootloader again and tried to do the whole process again and it just wouldn't root.
So i stopped trying and like 4 months went past and i still haven't found the solution!
When i try to update the phone it doesn't work and says the partition is damaged!
Soooo idk what to do, I really need help because half of the system apps that we're originally on the phone are gone, even Bluetooth wont turn on as well as NFC and some other stuff :/
(BTW i have very little knowledge when it comes to phones so don't write anything to complicated, if it is complicated i'll try to do it then )
Hopefully I will solve it with you guys
Click to expand...
Click to collapse
ScaleneVirus288 said:
What's ur Rom now ?
Click to expand...
Click to collapse
How do i check that?
Settings - about phone and firmware version
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
Is it android 6.0 or 7.0 ? That's what I want
ScaleneVirus288 said:
Settings - about phone and firmware version
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
Is it android 6.0 or 7.0 ? That's what I want
Click to expand...
Click to collapse
Android 7.0, EMUI 5.0
So u want to fix ur phone or just root ?
ScaleneVirus288 said:
So u want to fix ur phone or just root ?
Click to expand...
Click to collapse
I want to fix it... I cant do things with bluetooth, nfc... As i said
The easiest way it to flash custom and go back from custom to stock if u want stock ofc . Or if u don't want unlock bootloader u Can use dload or firmware finder .
U said that something says " participation damaged " . When ur phone says that ? After using dload or updator app ?
---------- Post added at 10:18 AM ---------- Previous post was at 10:10 AM ----------
U have fb link on my xda profile . If u want to talk with me pm me there cuz I won't be online on xda now .
ScaleneVirus288 said:
The easiest way it to flash custom and go back from custom to stock if u want stock ofc . Or if u don't want unlock bootloader u Can use dload or firmware finder .
U said that something says " participation damaged " . When ur phone says that ? After using dload or updator app ?
---------- Post added at 10:18 AM ---------- Previous post was at 10:10 AM ----------
U have fb link on my xda profile . If u want to talk with me pm me there cuz I won't be online on xda now .
Click to expand...
Click to collapse
I added you, we can talk on there

Bought a used N900v with TWRP installed and no 4G signal just 3G

I have 2 N900V phones with Alliance roms with safestrap on both. , wifes phone has a a bad switch so i bought a used N900V on Swappa. The phone came with TWRP installed so i flashed Alliance rom and everything works on except it is stuck on 3G. have tried most suggestions i could find and nothing works. So i thought it might be the rom, thought i remembered reading some where that Alliance rom may not work on TWRP. I installed Android 8.1]LineageOS 15.1 which works ok but still no 4G. The phone has a 4G back cover and model numbers are newer than my other 2 phones. Any ideas? Thanks for any help, my wife loves this phone Also i tried my sim card and both sim cards are new.
dmcccrae said:
I have 2 N900V phones with Alliance roms with safestrap on both. , wifes phone has a a bad switch so i bought a used N900V on Swappa. The phone came with TWRP installed so i flashed Alliance rom and everything works on except it is stuck on 3G. have tried most suggestions i could find and nothing works. So i thought it might be the rom, thought i remembered reading some where that Alliance rom may not work on TWRP. I installed Android 8.1]LineageOS 15.1 which works ok but still no 4G. The phone has a 4G back cover and model numbers are newer than my other 2 phones. Any ideas? Thanks for any help, my wife loves this phone Also i tried my sim card and both sim cards are new.
Click to expand...
Click to collapse
In setting about phone what is the baseband?
Thank you for your response. The new phone Baseband is N900VVRUE0F1. Both other phones are RUCNC4
I am not sure how TWRP works , is it overlaid on factory rom like my other phones which have safestrap ?
dmcccrae said:
Thank you for your response. The new phone Baseband is N900VVRUE0F1. Both other phones are RUCNC4
I am not sure how TWRP works , is it overlaid on factory rom like my other phones which have safestrap ?
Click to expand...
Click to collapse
TWRP replaces stock recovery if you're not using safestrap or bootstrap and the custom ROM replaces the factory ROM. Does the new phone have an unlocked bootloader or is it using safestrap? Which custom ROM are you using.
cssr said:
TWRP replaces stock recovery if you're not using safestrap or bootstrap and the custom ROM replaces the factory ROM. Does the new phone have an unlocked bootloader or is it using safestrap? Which custom ROM are you using.
Click to expand...
Click to collapse
I do not know if the boot loader is unlocked, how do i check? The phone came with TWRP and i have installed the Alliance rom using TWRP
dmcccrae said:
I do not know if the boot loader is unlocked, how do i check? The phone came with TWRP and i have installed the Alliance rom using TWRP
Click to expand...
Click to collapse
If the it's unlocked you may see a unlocked pad lock on the screen, after boot or reboot. Also if you boot into download mode and wait a few minutes a list of text will show up, one line will be " Developer Device ". If it is unlocked.
Read this, ( all of it, its short )it will help you update TWRP.
https://forum.xda-developers.com/verizon-galaxy-note-3/help/trouble-flashing-custom-rom-t3887320
Alliance ROM looks old (Android 4.4) from what I can find. Your baseband is for Android 5.0 or higher. After TWRP update you will be using HLTETMO ROMs and a lineageOS ROM like this one.
https://forum.xda-developers.com/ga...eageos-15-1-hltetmo-unofficial-t3829154/page1
Or one of the other ROMs here:
https://forum.xda-developers.com/galaxy-note-3/development
May be best for you. Read the first post in the tread of any ROM you want use. If you have a problem with a ROM use search in that ROMs tread, most questions have already been answered. You can also ask me here for help. Good luck and always make a backup before making big changes.
cssr said:
If the it's unlocked you may see a unlocked pad lock on the screen, after boot or reboot. Also if you boot into download mode and wait a few minutes a list of text will show up, one line will be " Developer Device ". If it is unlocked.
Read this, ( all of it, its short )it will help you update TWRP.
https://forum.xda-developers.com/verizon-galaxy-note-3/help/trouble-flashing-custom-rom-t3887320
Alliance ROM looks old (Android 4.4) from what I can find. Your baseband is for Android 5.0 or higher. After TWRP update you will be using HLTETMO ROMs and a lineageOS ROM like this one.
https://forum.xda-developers.com/ga...eageos-15-1-hltetmo-unofficial-t3829154/page1
Or one of the other ROMs here:
https://forum.xda-developers.com/galaxy-note-3/development
May be best for you. Read the first post in the tread of any ROM you want use. If you have a problem with a ROM use search in that ROMs tread, most questions have already been answered. You can also ask me here for help. Good luck and always make a backup before making big changes.
Click to expand...
Click to collapse
Thank you for the links, Bootloader appears unlocked as i get the custom unlocked padlock when it boots. I have 3.2.3-0 TWRP already and i flashed the 15-1 Linage rom and it works fine . My main problem is no 4G on any rom. Do you think i need to update or change baseband? Thanks again for the help.
I have the same issue except I get No service after 1 reboot or any twrp backups.
dmcccrae said:
Thank you for the links, Bootloader appears unlocked as i get the custom unlocked padlock when it boots. I have 3.2.3-0 TWRP already and i flashed the 15-1 Linage rom and it works fine . My main problem is no 4G on any rom. Do you think i need to update or change baseband? Thanks again for the help.
Click to expand...
Click to collapse
Your baseband is OK. Did you do a clean install and what does the status bar say for the cell signal?
---------- Post added at 01:39 PM ---------- Previous post was at 01:33 PM ----------
Dlind said:
I have the same issue except I get No service after 1 reboot or any twrp backups.
Click to expand...
Click to collapse
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.[/QUOTE]
Im starting to believe my issue is I have a Verizon note 3 board in a sprint phone I put the Verizon back plate back on
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
Also when I did get service 1x-4g the network name was "roaming indicator off". For maybe 2 minutes it stayed " Verizon wireless"
I just remembered that all touch wiz Roms do the same thing to me. Also for some reason I can't flash stock based Roms. I'm getting a little worried about my note 3
Dlind said:
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
Im starting to believe my issue is I have a Verizon note 3 board in a sprint phone I put the Verizon back plate back on
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
Also when I did get service 1x-4g the network name was "roaming indicator off". For maybe 2 minutes it stayed " Verizon wireless"
I just remembered that all touch wiz Roms do the same thing to me. Also for some reason I can't flash stock based Roms. I'm getting a little worried about my note 3[/QUOTE]
I would make a full backup and try a custom ROM that's not a touch wiz ROM ported to note 3. It may fix the phone and if not restore the backup.
cssr said:
Your baseband is OK. Did you do a clean install and what does the status bar say for the cell signal?
---------- Post added at 01:39 PM ---------- Previous post was at 01:33 PM ----------
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
cssr said:
Your baseband is OK. Did you do a clean install and what does the status bar say for the cell signal?
---------- Post added at 01:39 PM ---------- Previous post was at 01:33 PM ----------
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
dmcccrae said:
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
Click to expand...
Click to collapse
I almost think you have a hardware problem. The only way to be sure is to go back to shock, but it's a pain to root, unlock the bootloader and install TWRP again to get back to using custom ROMs. I let you know if I think of anything else.
---------- Post added at 04:30 AM ---------- Previous post was at 04:25 AM ----------
Dlind said:
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
Im starting to believe my issue is I have a Verizon note 3 board in a sprint phone I put the Verizon back plate back on
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
Also when I did get service 1x-4g the network name was "roaming indicator off". For maybe 2 minutes it stayed " Verizon wireless"
I just remembered that all touch wiz Roms do the same thing to me. Also for some reason I can't flash stock based Roms. I'm getting a little worried about my note 3[/QUOTE]
I would make a full backup and try a custom ROM that's not a touch wiz ROM ported to note 3. It may fix the phone and if not restore the backup.
Thank you for the help. I need help getting back to stock, i tried a stock program with odin 3 but i keep getting fail. I may be using the wrong stock rom as you noted this a a newer system.
# 1 Iam i doing the right process with odin 3 ?
#2 can you point me to the correct stock rom?
#3 can you tell me how to message another menber as i have not been able to find a link, the person i got the phone on Swappa from an XDA member and maybe he may know how to fix before i start from scratch.
Thank you for your help and sorry about the extra posts above, did not relize it was on page 2 (newbie)
dmcccrae said:
Thank you for the help. I need help getting back to stock, i tried a stock program with odin 3 but i keep getting fail. I may be using the wrong stock rom as you noted this a a newer system.
# 1 Iam i doing the right process with odin 3 ?
#2 can you point me to the correct stock rom?
#3 can you tell me how to message another menber as i have not been able to find a link, the person i got the phone on Swappa from an XDA member and maybe he may know how to fix before i start from scratch.
Thank you for your help and sorry about the extra posts above, did not relize it was on page 2 (newbie)
Click to expand...
Click to collapse
I was just helping someone else going back to shock. The information is here:
https://forum.xda-developers.com/ve...esetting-to-complete-stock-currently-t3892107
You need the XDA members user name. Then use search and find any post by that member. Click on the members avatar ( circle/picture next to their user name ), click the 3 dots at top right corner, click PM and write the member a message.
cssr said:
I was just helping someone else going back to shock. The information is here:
https://forum.xda-developers.com/ve...esetting-to-complete-stock-currently-t3892107
You need the XDA members user name. Then use search and find any post by that member. Click on the members avatar ( circle/picture next to their user name ), click the 3 dots at top right corner, click PM and write the member a message.
Click to expand...
Click to collapse
Thanks for your help Zachary. Update: Used your links and have phone back to stock 5.0, still 3G only signal. I called Verizon tech support and 1st person has you go through the basics and has sent a referral for a real tech, i am waiting for a call back. I let the phone perform updates, did hard reset and wipe still 3G. Let me know if you have any ideas while i am waiting for Verizon , thanks again for your help.
dmcccrae said:
Thanks for your help Zachary. Update: Used your links and have phone back to stock 5.0, still 3G only signal. I called Verizon tech support and 1st person has you go through the basics and has sent a referral for a real tech, i am waiting for a call back. I let the phone perform updates, did hard reset and wipe still 3G. Let me know if you have any ideas while i am waiting for Verizon , thanks again for your help.
Click to expand...
Click to collapse
My name is actually Mike. I live on the edge of a small city named Zachary. Good luck with your phone.
Thanks for your help Mike!
Well i am down to hardware issue, Verizon is telling me there is an issue with the 4G antenna and it is a different than the 3G antenna.
Does anybody know if this is true and if so where is the 4G antenna? I know there is an antenna cable between 2 contacts inside, does it handle
both signals? Thanks again for all your help and time.

Categories

Resources