Related
Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)
Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.
I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english
Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.
Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!
I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?
Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...
bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help
MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help
Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom
try to flash sbf use rsd
If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.
if sbf doesnt work u better send it to warranty
Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)
If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.
white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope
Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD,the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.
Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy
good night friends!
I'm here asking for this help not for lack of looking for the solution, sorry my bad english, I'm from Brazil and I
defy caught in a bootloader, I tried almost everything I found here in the forum, but most of the problems is
reset solved by making the recovery, but in my defy the recovery does not open, the flash works only power + vol up, already
I spent several roms to no avail, could someone help me run my recovery? grateful heart
list of roms flashead
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FFJORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbfz
JORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbf
JRDNEM_U3_2.34.1_DEBLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA02B.0R_USAJORDANRTCEE_P029_A019_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTHKTW_P021_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
Motorola_Defy_Nu___Android_2.2_FroYo
shadow_defy_2.3.3_85_Orange
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
mmec2 said:
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
Click to expand...
Click to collapse
I really can not, no way to go to the screen with the robot android! he goes right on the logo motorola M!
can it be hardware problem?
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
farsight73 said:
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
Click to expand...
Click to collapse
I'm using motorola rsd 4.9 with updated drivers, what happens is install the rom normal after reboot gets stuck in the Motorola M logo, the software update site does not recognize my phone, do all these roms that I would be no my phone?
im tried this roms now
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF
3.4.3_11-Stock.UKTmobile_BLUR
but no results!
don't worry about it, dude.
maybe you can try the way followed:
1.power off your defy;
2.remove the battery from the phone;
3.plug the usb cable into the phone without battery;
4.open RSD and chose one of the roms your listed, but 3.4.2-177-005 NORDIC prefered,
5.take the battery into your phone, now your can see the "connected" on RSD;
6.click the "start" button to flash;
7.wait the phone reboot completely, usually it'll reboot.
if not reboot, remove and on your battery, power on your phone, then press the "volume - and power" botton together, you can enter the robot screen, press volume up and down botton together, usually you can enter the recovery, then chose wipe 3 and 4, totally you can save your defy~~
Be sure to have enough battery while flashing..
Get the phone into bootloader (hold volume down when switch on) and flash an SBF like one from the list you've attached using RSD lite. Surely you have used RSD Lite before?
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
jdearauj said:
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
Click to expand...
Click to collapse
This same friend, I have the same problem, is this a hardware problem? I move the roms but not normal
Vol I login recovery - + Power key
http://forum.xda-developers.com/showthread.php?t=966537
Try flashing nordic, if fails arabic, if fails, 2.3.3, if fails probably corrupt nand broken hardware.
Before and after every flash always try to access recovery (volume down) and WIPE. reboot and wait crossing fingers, if it fails to boot flash next sbf, try to go recovery + wipe; reboot, cross more fingers; if fails to boot try next sbf and repeat.
The reason for this is that you can flash a lower version but it wont boot, so you have to flash a higher and higher version until you get one that works.
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
zyxwvut said:
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
Click to expand...
Click to collapse
OMG Exactly!!!! i have same problem and nobody seems to be able to tell me what to do, they keep saying same thing about trying various SBF's and Vol down + power method. No matter what SBF file I successfully flash with, i cannot get into boot recovery mode.
I have heard before from desperate users that they were able to revive their phone by flashing a full 2.3.4 sbf. This however comes with downsides of not being able to downgrade to froyo by flashing ANY froyo sbf's. There is a way to downgrade back to froyo but its a dirty method. Even after downgrade you can't just flash a sbf, you will always need to restore nandroid and flash fixed sbf
Well somehow i bricked my phone,I'm stuck on the Motorola logo,i try using sbf but it does not recognize my phone, oh yeah i had install cm7 diet rom witch really would not let me get into recovery cuz it kept saying that my phone was a htc bravo? So i try a droid bootstrap to see if that work and that's when my phone got bricked, can someone please help,and yes i tried going into recovery by pressing the volume and power button and it takes me into recovery and brings me to the Android and exclamation but that's it, even if i pressed the lower right corner nothing happens
ssfirme said:
Well somehow i bricked my phone,I'm stuck on the Motorola logo,i try using sbf but it does not recognize my phone, oh yeah i had install cm7 diet rom witch really would not let me get into recovery cuz it kept saying that my phone was a htc bravo? So i try a droid bootstrap to see if that work and that's when my phone got bricked, can someone please help,and yes i tried going into recovery by pressing the volume and power button and it takes me into recovery and brings me to the Android and exclamation but that's it, even if i pressed the lower right corner nothing happens
Click to expand...
Click to collapse
Press both volume buttons on the screen with the android and exclamation mark. That'll take you to stock recovery where you need to wipe data and factory reset.
If you have to flash the sbf again, try using sbf_flash on Linux. It'll flash in times where RSD won't recognize your phone.
Linux Live\sbf_flash tut
sbf_flash binary is in attachments
Only use Defy 2nd-init for recovery
(and once its installed, steal /system/bootmenu/* and /system/bin/bootmenu from Defy CM9 from June 5th on up -- touch bootmenu is pretty awesome; replacing the bootmenu isn’t for the feint of heart.)
the only problem is i dont have linux i have windows 7
Use rsdlite sri I don't have a link on me
Sent from my Galaxy Nexus using XDA
Had same type of problem on Friday. Followed this post http://forum.xda-developers.com/showthread.php?t=1559109 now I'm back up and running.
ssfirme said:
the only problem is i dont have linux i have windows 7
Click to expand...
Click to collapse
I dual boot between the two
If you have a blank cd and a usb drive\sdcard you can just use a Linux Live environment -- you never install Linux at all -- and you can use sbf_flash from there.
RSD Lite version that works and tutorial
And since it hasn't been mentioned yet, holding volume up + power on boot access the boot recovery to flash sbf's. Just make sure you have at least 50% battery before flashing or you might get an actual brick.
What your dealing with is nothing more than a recovery screw up. I had the same problem last night installing touch recovery -- it wiped /bootmenu/ instead of installing to it. Solution is to flash sbf, reboot, wipe data/factory reset from stock recovery, reboot, eebluroffee at first screen, root, enable non market apps, Defy 2nd init flash something that's better than stock.
ok i install the motorola usb drivers and start up rsd lite but it does not regocogize my phone
yes i have it in bootloader mode
Did you install everything before plugging phone in?
Try uninstalling everything motorola related and reinstalling just the drivers....On a previous Win7 install nothing was recognized, but on a reinstall of the entire system it worked fine and still does. I still recommend the Linux way over RSD because it will flash your phone regardless, provided you can access the loader.
I still haven't gotten native tethering to work with Windows, but then again, I quit trying sometime around December or January.
ssfirme said:
ok i install the motorola usb drivers and start up rsd lite but it does not regocogize my phone
Click to expand...
Click to collapse
This is for all those people who are having trouble flashing with RSDlite in Vista & WIndows 7.
If I am right, RSD lite does not seem to recognize the sbf file after you select it and instead the "start" button remains grayed out.
If that's the case, here the solution:
I had a similar problem and sucessfully used the command line parameters for RSDlite to force a flash. I managed to get a signed/unsigned firmware installed.
You need to copy the firmware you want to flash into the RSDlite directory in your program files folder.
Make sure you are in bootloader mode first.
Then, open command prompt and "cd" to the RSDlite directory
eg:
> cd C:\
> cd Program Files
> cd motorola
> cd RSDlite
>
now for the flashing type:
> SDL.exe -f xxxx.sbf -t 2
where xxxx.sbf is the firmware you are flashing to the phone.
flashing will begin shortly afterwards.
It worked for me, but in the end, show FAIL STATUS.
skeevy420 said:
I dual boot between the two
If you have a blank cd and a usb drive\sdcard you can just use a Linux Live environment -- you never install Linux at all -- and you can use sbf_flash from there.
RSD Lite version that works and tutorial
And since it hasn't been mentioned yet, holding volume up + power on boot access the boot recovery to flash sbf's. Just make sure you have at least 50% battery before flashing or you might get an actual brick.
What your dealing with is nothing more than a recovery screw up. I had the same problem last night installing touch recovery -- it wiped /bootmenu/ instead of installing to it. Solution is to flash sbf, reboot, wipe data/factory reset from stock recovery, reboot, eebluroffee at first screen, root, enable non market apps, Defy 2nd init flash something that's better than stock.
Click to expand...
Click to collapse
Thank you sooooooooooooooooo much!
After several hours of messing with my brothers Bravo, I finally got it working by following your instructions.
Really: I'm speechlees man.
hard bricked my phone
hello. i'm looking for any help to this issue: i believe i hard bricked my bravo somehow. it was running one of the first MIUI rom for two or more years. but became slow and laggy thru last months. and the other day it just freezed while i was browsing the call log. no reaction to the pover button at all, had to take out the battery. now it gives no reaction to any combination of button presses ( power; vol up + power ; vol down + power), the only signal what see is white LED light when į connect the phone to the PC. When phone is connected to the pc freshly, and when i press Vol down + Power, Windows 7 releases "clink" sound and device manager tries to show that "Motorola USB Device" is connected, but quickly disapears with another Windows sound. RDS lite 5,0 doesnt recognize phone too.
Is there any chance to bring this phone alive? any advise will be appreciated.
p.s. english isn't my native. sorry for the mistakes
dzdonce said:
hello. i'm looking for any help to this issue: i believe i hard bricked my bravo somehow. it was running one of the first MIUI rom for two or more years. but became slow and laggy thru last months. and the other day it just freezed while i was browsing the call log. no reaction to the pover button at all, had to take out the battery. now it gives no reaction to any combination of button presses ( power; vol up + power ; vol down + power), the only signal what see is white LED light when į connect the phone to the PC. When phone is connected to the pc freshly, and when i press Vol down + Power, Windows 7 releases "clink" sound and device manager tries to show that "Motorola USB Device" is connected, but quickly disapears with another Windows sound. RDS lite 5,0 doesnt recognize phone too.
Is there any chance to bring this phone alive? any advise will be appreciated.
p.s. english isn't my native. sorry for the mistakes
Click to expand...
Click to collapse
Not sure if this will help since I did not watch the video myself, but a quick Google search gave me a video describing how to take a Motorola USB cable and modify it to unbrick a phone. I did not watch the video yet so I don't know how relevant it is to your problem. But just by looking at the video preview it looks like the difficulty level may be pretty high... Here is the link:
http://m.youtube.com/watch?v=XwwI_6doBWk
Sent from my LG-D415 using XDA Free mobile app
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
1st don't loose your battery - when no working system on the device then it is not being charged
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
What ROM u had before flashing CM7?
Is it defy or defy+?
And you flashed CG5 sbf
When you give more details maybe I can propose proper solution.
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
Click to expand...
Click to collapse
If I understood right, OP's DEFY is completely bricked and he cannot even access recovery.
Anyway, I unfortunately no solution to propose as I have a DEFY in the same situtation and I'm currently unable to revive it. We aren't the only who had DEFY bricked like this and some managed to have it wake up by flashing certain sbf.
You can try searching "bricked defy" on XDA and see what sbf the topic creator used to save his DEFY, if he succeeded to.
dont flash sbf just after the bootloop..!
-JFK- said:
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
Click to expand...
Click to collapse
frend i wanna tell u onething.the very first time i did the flashing of cm7.1stable on froyo 2.2.2defy i got a bootloop..since i was in hostel i cudnt afford internet..so i was soo scared and even waited for 15 min..but the cm7 logo with an arrow swirling around didnt stop..i puld the batery out and again inserted and did something stupid like clearing data and got the condition worse
then i flashed sbf using rsd lite ..again rooted and flashed cm7.1 stable and got bootloop..this time i surfed net and found what shud hav been done ..
1)pull out the battery after the boootloop.
2)clear cache
3)reboot
tats it..the welcome window comes in no time..
so coming to the present issue, after flashing the smf did u get bootanimation with light passing over "android" againg and again ??
Check that u r using the latest RSD.
I have a Defy plus but the same thing happened to me before (black screen even no boot with vol up) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
The most important thing is to use the latest version of RSD.
and please tell me if it worked.
I'm not responsible for anything.
These days I have flashed Xpria D rom into my Defy. Everything's fine, but always meet "unknown error -24" or "invalid package" while installing apps. So I decided to flash another JB rom. Unluckily, things got even worse. No WiFi, and no Signal. I got really mad, so today I tried to flash SBF packages,
----------------------
1. I have Downloaded & Installed RSDL and Drivers
2. I forgot to wipe data / cache before flashing SBF
3. My BL seemed to be 5, but I flashed JRDNEM_U3_3.4.2_177-005_NORDIC, which BL is 4 (?)
4. After flashing, it said "please manually reboot....",
5. I pulled the battery, unplugged USB cable, and put the battery back, then tried to boot my Defy in normal way
6. BLACKSCREEN!
7. Then I attempt to boot into bootloader in some ways, like
7a. Pull the battery, (after moments) put it back, with holding POWER and VOL+ -> Nothing happened, and RSD not detected my Defy
7b. Pull the battery, connect Defy (without batt) to the computer, with holding VOL+ and POWER, and put the battery back quickly -> Not working, RSD not detected
8. So my question, exactly, is my Defy got blackscreen, and just can't detected by RSD anyway. Anyone help?
PS: The front LED seems working while plugging phone into the computer....
l19980623 said:
these days i have flashed xpria d rom into my defy. Everything's fine, but always meet "unknown error -24" or "invalid package" while installing apps. So i decided to flash another jb rom. Unluckily, things got even worse. No wifi, and no signal. I got really mad, so today i tried to flash sbf packages,
----------------------
1. I have downloaded & installed rsdl and drivers
2. I forgot to wipe data / cache before flashing sbf
3. My bl seemed to be 5, but i flashed jrdnem_u3_3.4.2_177-005_nordic, which bl is 4 (?)
4. After flashing, it said "please manually reboot....",
5. I pulled the battery, unplugged usb cable, and put the battery back, then tried to boot my defy in normal way
6. Blackscreen!
7. Then i attempt to boot into bootloader in some ways, like
7a. Pull the battery, (after moments) put it back, with holding power and vol+ -> nothing happened, and rsd not detected my defy
7b. Pull the battery, connect defy (without batt) to the computer, with holding vol+ and power, and put the battery back quickly -> not working, rsd not detected
8. So my question, exactly, is my defy got blackscreen, and just can't detected by rsd anyway. Anyone help?
Ps: The front led seems working while plugging phone into the computer....
Click to expand...
Click to collapse
我和你一样啊,也是亮白灯,据说可以盲刷手机,但是我没有成功,希望你能成功
zyf6578 said:
我和你一样啊,也是亮白灯,据说可以盲刷手机,但是我没有成功,希望你能成功
Click to expand...
Click to collapse
Yes, and I have tried on two different computers. Not working
Does that means my Defy really bricked?
Charge battery & read unbrick defy guide. 1000 threads with same problem...
turffe said:
Charge battery & read unbrick defy guide. 1000 threads with same problem...
Click to expand...
Click to collapse
R they really the same? The RSDL CANNOT detect my phone, and I'm sure they're charged.
Defy Bricked
Hello,
Phone: Motorola Defy mb525 US TMobile(Currently being used in India)
Build number: 3.4.2-107 idn-9
I was trying to look for some applications that could take backup of my existing ROM when I forgot to turn off debugging during reboot after installing 2ndInit. Now I am unable to boot it up and it reboots after M logo. I tried fastboot but get only Android System Recovery. I have tried the following without any success.
1. RSD Lite: I dont see my phone in the device properties when I connect it to Windows after fast boot. Clicking Start and Show Device button does nothing.
2. Had battery drain problem but managed to get it charged using macgyver battery charge method.
Can some one really tell me how do I fix this?
Would appreciate your response.
I really need my phone back. :crying:
Srinivas
l19980623 said:
R they really the same? The RSDL CANNOT detect my phone, and I'm sure they're charged.
Click to expand...
Click to collapse
RSDL cant detect my phone either.... Did you already find a solution? I'm really stuck....